Cation−Anion−CO2 Interactions in Imidazolium-Based Ionic Liquid Sorbents

Direct Air Capture and Integrated Conversion of Carbon Dioxide into Cyclic Carbonates with Basic Organic Salts

Direct air capture and integrated conversion is a very attractive strategy to reduce CO₂ concentration in the atmosphere. However, the existing capturing processes are technologically challenging due to the costs of the processes and the low concentration of CO₂. The efficient valorization of the CO₂ captured could help overcome many techno-economic limitations. Here, we present a novel economical methodology for direct air capture and conversion that is able to efficiently convert CO₂ from the air into cyclic carbonates. The new approach employs commercially available basic ionic liquids, works without the need for sophisticated and expensive co-catalysts or sorbents and under mild reaction conditions. The CO₂ from atmospheric air was efficiently captured by IL solution (0.98 molCO₂/mol_IL) and, subsequently, completely converted into cyclic carbonates using epoxides or halohydrins potentially derived from biomass as substrates. A mechanism of conversion was evaluated, which helped to identify relevant reaction intermediates based on halohydrins, and consequently, a 100% selectivity was obtained using the new methodology.

Supported Imidazolium-Based Ionic Liquids on a Polysulfone Matrix for Enhanced CO2 Capture

The present work demonstrates the potential for improved CO₂ capture capabilities of ionic liquids (ILs) by supporting them on a polysulfone polymeric matrix. CO₂ is one of the main gases responsible for the greenhouse effect and is a focus of The European Commission, which committed to diminishing its emission to 55% by 2023. Various ILs based on combinations of 1-butyl-3-methyl- imidazolium cations and different anions (BMI·X) were synthesized and supported on a polysulfone porous membrane. The influence of the membrane structure and the nature of ILs on the CO₂ capture abilities were investigated. It was found that the membrane's internal morphology and its surface characteristics influence its ILs sorption capacity and CO₂ solubility. In most of the studied configurations, supporting ILs on porous structures increased their contact surface and gas adsorption compared to the bulk ILs. The phenomenon was strongly pronounced in the case of ILs of high viscosity, where supporting them on porous structures resulted in a CO₂ solubility value increase of 10×. Finally, the highest CO₂ solubility value (0.24 mol_CO2/mol_IL) was obtained with membranes bearing supported ILs containing dicarboxylate anion (BMI.MAL).

Ionic Liquid-Based Polymer Nanocomposites for Sensors, Energy, Biomedicine, and Environmental Applications: Roadmap to the Future

Current interest toward ionic liquids (ILs) stems from some of their novel characteristics, like low vapor pressure, thermal stability, and nonflammability, integrated through high ionic conductivity and broad range of electrochemical strength. Nowadays, ionic liquids represent a new category of chemical-based compounds for developing superior and multifunctional substances with potential in several fields. ILs can be used in solvents such as salt electrolyte and additional materials. By adding functional physiochemical characteristics, a variety of IL-based electrolytes can also be used for energy storage purposes. It is hoped that the present review will supply guidance for future research focused on IL-based polymer nanocomposites electrolytes for sensors, high performance, biomedicine, and environmental applications. Additionally, a comprehensive overview about the polymer-based composites' ILs components, including a classification of the types of polymer matrix available is provided in this review. More focus is placed upon ILs-based polymeric nanocomposites used in multiple applications such as electrochemical biosensors, energy-related materials, biomedicine, actuators, environmental, and the aviation and aerospace industries. At last, existing challenges and prospects in this field are discussed and concluding remarks are provided.

The AEROPILs Generation: Novel Poly(Ionic Liquid)-Based Aerogels for CO2 Capture

CO₂ levels in the atmosphere are increasing exponentially. The current climate change effects motivate an urgent need for new and sustainable materials to capture CO₂. Porous materials are particularly interesting for processes that take place near atmospheric pressure. However, materials design should not only consider the morphology, but also the chemical identity of the CO₂ sorbent to enhance the affinity towards CO₂. Poly(ionic liquid)s (PILs) can enhance CO₂ sorption capacity, but tailoring the porosity is still a challenge. Aerogel’s properties grant production strategies that ensure a porosity control. In this work, we joined both worlds, PILs and aerogels, to produce a sustainable CO₂ sorbent. PIL-chitosan aerogels (AEROPILs) in the form of beads were successfully obtained with high porosity (94.6–97.0%) and surface areas (270–744 m²/g). AEROPILs were applied for the first time as CO₂ sorbents. The combination of PILs with chitosan aerogels generally increased the CO₂ sorption capability of these materials, being the maximum CO₂ capture capacity obtained (0.70 mmol g⁻¹, at 25 °C and 1 bar) for the CHT:P[DADMA]Cl_30%AEROPIL.

Fast and non-destructive determination of water content in ionic liquids at varying temperatures by Raman spectroscopy and multivariate regression analysis

Imidazolium acetate ionic liquids (ILs) have been utilized as promising solvents in many applications that involve varying water content and temperature. These experimental variables affect the anion-cation intermolecular interactions, which in turn influence the performance of the ILs in these applications. This paper shows Raman spectroscopy can be used as an operando method to measure water content in IL solvents when simultaneous temperature changes may occur. The Raman spectra of 1-alkyl-3-methylimidazolium acetate ILs (alkyl chain length n = 2, 4, 6, 8) with varying water content (from 0.028 to 0.899 water mole fraction) and temperature (from 78.1 K to 423.1 K) were measured. Increasing the water content or decreasing the temperature of the tested ILs weakens the anion-cation intermolecular interactions. The water content of these ILs can be quantified even in conditions when the temperature is changing using Raman spectroscopy combined with multivariate regression analysis, including principal component regression (PCR), partial-least-squares regression (PLSR), and artificial neural networks (ANNs). The ANN model combined with partial-least-squares (PLS) achieved the highest prediction accuracy of water content in ILs at varying temperatures (RMSECV = 0.017, R²_CV = 99.1%, RMSEP = 0.019, R²_P = 98.8%, RPD = 8.93). Raman spectroscopy provides a potential fast non-destructive operando method to monitor the water content of ILs even in applications when the temperature may be simultaneously altered; this information can lead to the optimized use of these ILs in many applications.

Direct CO2 Capture and Reduction to High-End Chemicals with Tetraalkylammonium Borohydrides

We demonstrate the ability of tetraalkylammonium borohydrides to capture large amounts of CO₂ , even at low CO₂ concentrations, and reduce it to formate under ambient conditions. These materials show CO₂ absorption capacities up to 30 mmol CO 2  g^-1 at room temperature and 1 bar CO₂ . Every BH₄ ^- anion can react with three CO₂ molecules to form triformatoborohydride ([HB(OCHO)₃ ]^- ). The thermodynamics and kinetics of the reaction were monitored by a magnetic suspension balance (MSB). Direct CO₂ capture and reduction from air was achieved with tetraethyl, -propyl, and -butylammonium borohydride. The alkyl chain length played an important role in the kinetics and thermodynamics of the reaction, especially in CO₂ diffusivity (crystallinity and free-volume), activation energy (charge-transfer dependent on the alkyl chain), and hydrophobicity. Adding HCl gave formic acid and the corresponding chloride ammonium salt, which can be recycled. In addition, transfer of formate was achieved for the N-formylation of an amine.

Influence of ionic liquid-like cationic pendants composition in cellulose based polyelectrolytes on membrane-based CO2 separation

Cellulose acetate (CA) is an attractive membrane polymer for CO₂ capture market. However, its low CO₂ permeability hampers its application as part of a membrane for most relevant types of CO₂ containing feeds. This work investigates the enhancement of CA separation performance by incorporating ionic liquid-like pendants (1-methylimidazol, 1-methylpyrrolidine, and 2-hydroxyethyldimethylamine (HEDMA) on the CA backbone. These CA-based polyelectrolytes (PEs), synthesised by covalent grafting of cationic pendants with anion metathesis, were characterised by NMR, FTIR, DSC/TGA, and processed into thin-film composite membranes. The membrane performance in CO₂/N₂ mixed-gas permeation experiments shows a decrease in CO₂ and N₂ permeability and an initial decrease and then gradual increase in CO₂/N₂ selectivity with increasing HEDMA content. The amount of HEDMA attached to the CA backbone determines overall separation process in bifunctional PEs. This indicates that the hydroxy-substituted cationic pendants alter interactions between PEs network and permeating CO₂ molecules, suggesting possibilities for further improvements.

The Nature of Carbon Dioxide in Bare Ionic Liquids

Ionic liquids (ILs) are among the most studied and promising materials for selective CO₂ capture and transformation. The high CO₂ sorption capacity associated with the possibility to activate this rather stable molecule through stabilization of ionic/radical species or covalent interactions either with the cation or anion has opened new avenues for CO₂ functionalization. However, recent reports have demonstrated that another simpler and plausible pathway is also involved in the sorption/activation of CO₂ by ILs associated with basic anions. Bare ILs or IL solutions contain almost invariable significant amounts of water and through interaction with CO₂ generate carbonates/bicarbonates rather than carbamic acids or amidates. In these cases, the IL acts as a base and not a nucleophile and yields buffer-like solutions that can be used to shift the equilibrium toward acid products in different CO₂ reutilization reactions. In this Minireview, the emergence of IL buffer-like solutions as a new reactivity paradigm in CO₂ capture and activation is described and analyzed critically, mainly through the evaluation of NMR data.

Anion Effect on Gas Absorption in Imidazolium-Based Ionic Liquids

We performed classical Molecular Dynamics computer simulations to analyze solutions of the gases CO₂, N₂, and CH₄ in four 1-n-butyl-3-methylimidazolium-based ionic liquids (1-n-butyl-3-methylimidazolium acetate, 1-n-butyl-3-methylimidazolium prolinate, 1-n-butyl-3-methylimidazolium bromide, and 1-n-butyl-3-methylimidazolium tetrafluoroborate). Typical experimental conditions (10 bar gas pressure and room temperature) have been chosen to study mixtures of the ionic liquids with the gases at a single gas molar fraction of 0.25. Structural aspects are discussed to judge the absorption capacities of the ionic liquids. We observed that CO₂ coordinates preferentially within the polar domain of the ionic liquids with the bromide and tetrafluoroborate anions presenting the best performances. The other gases, N₂ and CH₄, remain in the less polar domains of the ionic liquids. Cluster size analysis indicates phase separation for these two gases. Considering both, the absorption tendency and gas separation capacity of the ionic liquids, the anion is desired to be small and possessing multiple coordination sites. In this aspect, the tetrafluoroborate anion accomplished the best results.

Insight into the molecular mechanism that controls the solubility of CH4 in ionic liquids

The electrostatic – misfit energy arise from repulsive interaction of CH₄ plays a dominant role in determining its solubility in ILs. Modelling using COSMO-RS shows that IL size and van der Walls forces only have marginal influences on CH₄ solubility.

Intelligent antibacterial surface based on ionic liquid molecular brushes for bacterial killing and release

The prevention of bacteria-induced infections has been increasing in importance in both clinical surgery and biomedical engineering. Although great attention has been paid to designing intelligent antibacterial surfaces, the fabrication processes are still not facile and universal enough, and the antibacterial efficiencies of these surfaces are also not ideal. Herein, ionic liquid (IL) molecules of 3-(12-mercaptododecyl)-1-methyl-1H-imidazol-3-ium bromide (IL(Br)) were synthesized with the minimum inhibitory concentrations as low as 4 and 8 μg mL-1 against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), respectively. By simply immersing a polymeric substrate into the IL(Br) solution, an antibacterial surface with high killing efficiency of 99% against S. aureus (94% against E. coli) was achieved via a mussel-inspired approach. Subsequently, 97% S. aureus and 95% E. coli on the substrate could be released by simple ion-exchange of Br- with (CF3SO2)2N- due to the ion sensitivity of the IL molecular brushes. Thus, the proposed facile strategy towards a superior efficiency surface could be potentially used in intelligent antibacterial fields.