Vacancy assisted diffusion on single-atom surface alloys

Strategies for Achieving Ultra-Long ORR Durability-Rh Activates Interatomic Interactions in Alloys

The stability of platinum-based alloy catalysts is crucial for the future development of proton exchange membrane fuel cells, considering the potential dissolution of transition metals under complex operating conditions. Here, we report on a Rh-doped Pt3Co alloy that exhibits strong interatomic interactions, thereby enhancing the durability of fuel cells. The Rh-Pt3Co/C catalyst demonstrates exceptional catalytic activity for oxygen reduction reactions (ORR) (1.31 A mgPt -1 at 0.9 V vs. the reversible hydrogen electrode (RHE) and maintaining 92 % of its mass activity after 170,000 potential cycles). Long-term testing has shown direct inhibition of Co dissolution in Rh-Pt3Co/C. Furthermore, tests on proton exchange membrane fuel cells (PEMFC) have shown excellent performance and long-term durability with low Pt loading. After 50,000 cycles, there was no voltage loss at 0.8 A cm-2 for Rh-Pt3Co/C, while Pt3Co/C experienced a loss of 200 mV. Theoretical calculations suggest that introducing transition metal atoms through doping creates a stronger compressive strain, which in turn leads to increased catalytic activity. Additionally, Rh doping increases the energy barrier for Co diffusion in the bulk phase, while also raising the vacancy formation energy of the surface Pt. This ensures the long-term stability of the alloy over the course of the cycle.

Thermally Methanol Oxidation via the Mn1@Co3O4(111) Facet: Non-CO Reaction Pathway

Co3O4, as the support of single-atom catalysts, is effective in electron-structure modulation to get distinct methanol adsorption behaviors and adjustable reaction pathways for the methanol oxidation reaction. Herein, we considered the facets that constitute a Co vacancy of the Co3O4(111) facet and a foreign metal atom M (M = Fe, Ni, Cu, Ru, Rh, Pd, Ag, Os, Ir, Pt, Au, Mn) leading to single-atom catalysts. The Mn1@Co3O4(111) facet is the facet considered the most favorable among all of the possible terminations. Oxygen adsorption, decomposition, and its co-adsorption with methanol are the vital steps of methanol oxidation at the exposed Mn1@Co3O4(111) facet, giving rise to the stable configuration: two O* and one CH3OH* adsorbates. Then, the Mn1@Co3O4(111) facet activates the O-H and C-H bonds within CH3OH*, advances CH3O* → H2CO* → HCOO* → COO*, and releases the products H2, H2O, and CO2 consecutively.

Kinetic Monte Carlo simulations for heterogeneous catalysis: Fundamentals, current status, and challenges

Kinetic Monte Carlo (KMC) simulations in combination with first-principles (1p)-based calculations are rapidly becoming the gold-standard computational framework for bridging the gap between the wide range of length scales and time scales over which heterogeneous catalysis unfolds. 1p-KMC simulations provide accurate insights into reactions over surfaces, a vital step toward the rational design of novel catalysts. In this Perspective, we briefly outline basic principles, computational challenges, successful applications, as well as future directions and opportunities of this promising and ever more popular kinetic modeling approach.

Carbide coating on nickel to enhance the stability of supported metal nanoclusters

The influence on the growth of cobalt (Co)-based nanostructures of a surface carbide (Ni₂C) layer formed at the Ni(100) surface is revealed via complementary scanning tunneling microscopy (STM) measurements and first-principles calculations. On clean Ni(100) below 200 °C in the sub-monolayer regime, Co forms randomly distributed two-dimensional (2D) islands, while on Ni₂C it grows in the direction perpendicular to the surface as well, thus forming two-atomic-layers high islands. We present a simple yet powerful model that explains the different Co growth modes for the two surfaces. A jagged step decoration, not visible on stepped Ni(100), is present on Ni₂C. This contrasting behavior on Ni₂C is explained by the sharp differences in the mobility of Co atoms for the two cases. By increasing the temperature, Co dissolution is activated with almost no remaining Co at 250 °C on Ni(100) and Co islands still visible on the Ni₂C surface up to 300 °C. The higher thermal stability of Co above the Ni₂C surface is rationalized by ab initio calculations, which also suggest the existence of a vacancy-assisted mechanism for Co dissolution in Ni(100). The methodology presented in this paper, combining systematically STM measurements with first-principles calculations and computational modelling, opens the way to controlled engineering of bimetallic surfaces with tailored properties.

A casting combined quenching strategy to prepare PdAg single atom alloys designed using the cluster expansion combined Monte Carlo method

In this work, the surface structure of a PdAg alloy is investigated by cluster expansion (CE) combined Monte Carlo (MC) simulations. All systems with different component proportions show an obvious component segregation corresponding to the depth from the surface. A significant amount of Ag is observed on the first layer, and Pd is concentrated significantly on the second layer. The Pd distribution on the PdAg surfaces is closely related to the temperature and composition ascribed to the concentration and configurational entropy effects, which are explicitly treated in MC simulations. The vacancies mainly distribute separately. The simulation results show good agreement with the experimental evidence. Moreover, we demonstrated a general and highly effective casting combined quenching strategy for controlling the ensemble size and chemical composition of alloy surfaces which could successfully be applied to the large-scale production of SAA.

Vacancy assisted diffusion on single-atom surface alloys

Bimetallic surfaces can exhibit an improved catalytic activity through tailoring the concentration and/or the arrangement of the two metallic components. However, in order to be catalytically active, the active bimetallic surface structure has to be stable under operating conditions. Typically, structural changes in metals occur via vacancy diffusion. Based on the first-principles determination of formation energies and diffusion barriers we have performed kinetic Monte-Carlo (kMC) simulations to analyse the (meta-)stability of PtRu/Ru(0001), AgPd/Pd(111), PtAu/Au(111) and InCu/Cu(100) surface alloys. In a first step, here we consider single-atom alloys together with one vacancy per simulation cell. We will present results of the time evolution of these structures and analyse them in terms of the interaction between the constituents of the bimetallic surface.