Metal Segregation in Bimetallic CoPd Carbide Carbonyl Clusters: Synthesis, Structure, Reactivity and Electrochemistry of [H6−nCo20Pd16C4(CO)48]n−(n=3-6)

From M6 to M12, M19 and M38 molecular alloy Pt-Ni carbonyl nanoclusters: selective growth of atomically precise heterometallic nanoclusters

Heterometallic Chini-type clusters [Pt_6-xNi_x(CO)₁₂]^2- (x = 0-6) were obtained by reactions of [Pt₆(CO)₁₂]^2- with Ni-clusters such as [Ni₆(CO)₁₂]^2-, [Ni₉(CO)₁₈]^2- and [H₂Ni₁₂(CO)₂₁]^2-, or from [Pt₉(CO)₁₈]^2- and [Ni₆(CO)₁₂]^2-. The Pt/Ni composition of [Pt_6-xNi_x(CO)₁₂]^2- (x = 0-6) depended on the nature of the reagents employed and their stoichiometry. Reactions of [Pt₉(CO)₁₈]^2- with [Ni₉(CO)₁₈]^2- and [H₂Ni₁₂(CO)₂₁]^2-, as well as reactions of [Pt₁₂(CO)₂₄]^2- with [Ni₆(CO)₁₂]^2-, [Ni₉(CO)₁₈]^2- and [H₂Ni₁₂(CO)₂₁]^2-, afforded [Pt_9-xNi_x(CO)₁₈]^2- (x = 0-9) species. [Pt_6-xNi_x(CO)₁₂]^2- (x = 1-5) were converted into [Pt_12-xNi_x(CO)₂₁]^4- (x = 2-10) upon heating in CH₃CN at 80 °C, with almost complete retention of the Pt/Ni composition. Reaction of [Pt_12-xNi_x(CO)₂₁]^4- (x ≈ 8) with HBF₄·Et₂O afforded the [HPt_14+xNi_24-x(CO)₄₄]^5- (x ≈ 0.7) nanocluster. Finally, [Pt_19-xNi_x(CO)₂₂]^4- (x = 2-6) could be obtained by heating [Pt_9-xNi_x(CO)₁₈]^2- (x = 1-3) in CH₃CN at 80 °C, or [Pt_6-xNi_x(CO)₁₂]^2- (2-4) in DMSO at 130 °C. The molecular structures of these new alloy nanoclusters have been determined by single crystal X-ray diffraction. The site preference of Pt and Ni within their metal cages has been computationally investigated. The electrochemical and IR spectroelectrochemical behavior of [Pt_19-xNi_x(CO)₂₂]^4- (x = 3.11) has been studied and compared to the isostructural homometallic nanocluster [Pt₁₉(CO)₂₂]^4-.

Atomically Precise Platinum Carbonyl Nanoclusters: Synthesis, Total Structure, and Electrochemical Investigation of [Pt27(CO)31]4- Displaying a Defective Structure

The molecular Pt nanocluster [Pt₂₇(CO)₃₁]^4– (1^4–) was obtained by thermal decomposition of [Pt₁₅(CO)₃₀]^2– in tetrahydrofuran under a H₂ atmosphere. The reaction of 1^4– with increasing amounts of HBF₄·Et₂O afforded the previously reported [Pt₂₆(CO)₃₂]^2– (3^2–) and [Pt₂₆(CO)₃₂]⁻ (3^–). The new nanocluster 1^4– was characterized by IR and UV–visible spectroscopy, single-crystal X-ray diffraction, direct-current superconducting quantum interference device magnetometry, cyclic voltammetry, IR spectroelectrochemistry (IR SEC), and electrochemical impedance spectroscopy. The cluster displays a cubic-close-packed Pt₂₇ framework generated by the overlapping of four ABCA layers, composed of 3, 7, 11, and 6 atoms, respectively, that encapsulates a fully interstitial Pt₄ tetrahedron. One Pt atom is missing within layer 3, and this defect (vacancy) generates local deformations within layers 2 and 3. These local deformations tend to repair the defect (missing atom) and increase the number of Pt–Pt bonding contacts, minimizing the total energy. The cluster 1^4– is perfectly diamagnetic and displays a rich electrochemical behavior. Indeed, six different oxidation states have been characterized by IR SEC, unraveling the series of 1^n– (n = 3–8) isostructural nanoclusters. Computational studies have been carried out to further support the interpretation of the experimental data.

The synthesis, molecular structure, magnetic properties, computational investigation, electrochemical and IR spectroelectrochemical behavior, and electrochemical impedance spectroscopy investigation of the new multivalent [Pt₂₇(CO)₃₁]⁴⁻ nanocluster are reported.

Atomically Precise Ni-Pd Alloy Carbonyl Nanoclusters: Synthesis, Total Structure, Electrochemistry, Spectroelectrochemistry, and Electrochemical Impedance Spectroscopy

The molecular nanocluster [Ni36-xPd5+x(CO)46]6- (x = 0.41) (16-) was obtained from the reaction of [NMe3(CH2Ph)]2[Ni6(CO)12] with 0.8 molar equivalent of [Pd(CH3CN)4][BF4]2 in tetrahydrofuran (thf). In contrast, [Ni37-xPd7+x(CO)48]6- (x = 0.69) (26-) and [HNi37-xPd7+x(CO)48]5- (x = 0.53) (35-) were obtained from the reactions of [NBu4]2[Ni6(CO)12] with 0.9-1.0 molar equivalent of [Pd(CH3CN)4][BF4]2 in thf. After workup, 35- was extracted in acetone, whereas 26- was soluble in CH3CN. The total structures of 16-, 26-, and 35- were determined with atomic precision by single-crystal X-ray diffraction. Their metal cores adopted cubic close packed structures and displayed both substitutional and compositional disorder, in light of the fact that some positions could be occupied by either Ni or Pd. The redox behavior of these new Ni-Pd molecular alloy nanoclusters was investigated by cyclic voltammetry and in situ infrared spectroelectrochemistry. All three compounds 16-, 26-, and 35- displayed several reversible redox processes and behaved as electron sinks and molecular nanocapacitors. Moreover, to gain insight into the factors that affect the current-potential profiles, cyclic voltammograms were recorded at both Pt and glassy carbon working electrodes and electrochemical impedance spectroscopy experiments performed for the first time on molecular carbonyl nanoclusters.

Metal carbonyl clusters of groups 8-10: synthesis and catalysis

In this review article, we discuss advances in the chemistry of metal carbonyl clusters (MCCs) spanning the last three decades, with an emphasis on the more recent reports and those involving groups 8-10 elements. Synthetic methods have advanced and been refined, leading to higher-nuclearity clusters and a wider array of structures and nuclearities. Our understanding of the electronic structure in MCCs has advanced to a point where molecular chemistry tools and other advanced tools can probe their properties at a level of detail that surpasses that possible with other nanomaterials and solid-state materials. MCCs therefore advance our understanding of structure-property-reactivity correlations in other higher-nuclearity materials. With respect to catalysis, this article focuses only on homogeneous applications, but it includes both thermally and electrochemically driven catalysis. Applications in thermally driven catalysis have found success where the reaction conditions stabilise the compounds toward loss of CO. In more recent years, MCCs, which exhibit delocalised bonding and possess many electron-withdrawing CO ligands, have emerged as very stable and effective for reductive electrocatalysis reactions since reduction often strengthens M-C(O) bonds and since room-temperature reaction conditions are sufficient for driving the electrocatalysis.

Synthesis, Structural Characterization, and DFT Investigations of [MxM'5-xFe4(CO)16]3- (M, M' = Cu, Ag, Au; M ≠ M') 2-D Molecular Alloy Clusters

Miscellaneous 2-D molecular alloy clusters of the type [M_xM'_5-xFe₄(CO)₁₆]^3- (M, M' = Cu, Ag, Au; M ≠ M') have been prepared through the reactions of [Cu₃Fe₃(CO)₁₂]^3-, [Ag₄Fe₄(CO)₁₆]^4- or [M₅Fe₄(CO)₁₆]^3- (M = Cu, Ag) with M'(I) salts (M' = Cu, Ag, Au). Their formation involves a combination of oxidation, condensation, and substitution reactions. The total structures of several [M_xM'_5-xFe₄(CO)₁₆]^3- clusters with different compositions have been determined by means of single crystal X-ray diffraction (SC-XRD) and their nature in solution elucidated by electron spray ionization mass spectrometry (ESI-MS) and IR and UV-visible spectroscopy. Substitutional and compositional disorder is present in the solid state structures, and ESI-MS analyses point out that mixtures of isostructural clusters differing by a few M/M' coinage metals are present. SC-XRD studies indicate some site preferences of the coinage metals within the metal cores of these clusters, with Au preferentially in corner sites and Cu in the central site. DFT studies give theoretical support to the experimental structural evidence. The site preference is mainly dictated by the strength of the Fe-M bonds that decreases in the order Fe-Au > Fe-Ag > Fe-Cu, and the preferred structure is the one that maximizes the number of stronger Fe-M interactions. Overall, the molecular nature of these clusters allows their structures to be fully revealed with atomic precision, resulting in the elucidation of the bonding parameters that determine the distribution of the different metals within their metal cores.

Cluster Core Isomerism Induced by Crystal Packing Effects in the [HCo15Pd9C3(CO)38]2- Molecular Nanocluster

This article describes a rare case of cluster core isomerism in a large molecular organometallic nanocluster. In particular, two isomers of the [HCo15Pd9C3(CO)38]2- nanocluster, referred as TP-Pd9 and Oh-Pd9, have been structurally characterized by single-crystal X-ray crystallography as their [NMe3(CH2Ph)]2[HCo15Pd9C3(CO)38]·CH2Cl2 (ca. 1:1 TP-Pd9 and Oh-Pd9 mixture), [NMe3(CH2Ph)]2[HCo15Pd9C3(CO)38]·2CH2Cl2 (mainly TP-Pd9), [NEt3(CH2Ph)]2[HCo15Pd9C3(CO)38]·CH2Cl2 (mainly TP-Pd9), [MePPh3]2[HCo15Pd9C3(CO)38]·2.5CH2Cl2 (mainly TP-Pd9), and [MePPh3]2[HCo15Pd9C3(CO)38] (Oh-Pd9) salts. The cluster core of TP-Pd9 is a tricapped trigonal prism, whereas this is a tricapped octahedron in Oh-Pd9. The presence in the solid state of the Oh-Pd9 or TP-Pd9 isomers depends on the cation employed and/or the number and type of co-crystallized solvent molecules. Often, mixtures of the two isomers, within the same single crystal or as mixtures of different crystals within the same crystallization batch, are obtained. Structural isomerism in organometallic nanoclusters is discussed and compared to that in Au-thiolate nanoclusters.

Molecular Nickel Phosphide Carbonyl Nanoclusters: Synthesis, Structure, and Electrochemistry of [Ni11P(CO)18]3- and [H6-nNi31P4(CO)39]n- (n = 4 and 5)

The reaction of [NEt₄]₂[Ni₆(CO)₁₂] in thf with 0.5 equiv of PCl₃ affords the monophosphide [Ni₁₁P(CO)₁₈]^3- that in turn further reacts with PCl₃ resulting in the tetra-phosphide carbonyl cluster [HNi₃₁P₄(CO)₃₉]^5-. Alternatively, the latter can be obtained from the reaction of [NEt₄]₂[Ni₆(CO)₁₂] in thf with 0.8-0.9 equiv of PCl₃. The [HNi₃₁P₄(CO)₃₉]^5- penta-anion is reversibly protonated by strong acids leading to the [H₂Ni₃₁P₄(CO)₃₉]^4- tetra-anion, whereas deprotonation affords the [Ni₃₁P₄(CO)₃₉]^6- hexa-anion. The latter is reduced with Na/naphthalene yielding the [Ni₃₁P₄(CO)₃₉]^7- hepta-anion. In order to shed light on the polyhydride nature and redox behavior of these clusters, electrochemical and spectroelectrochemical studies were carried out on [Ni₁₁P(CO)₁₈]^3-, [HNi₃₁P₄(CO)₃₉]^5-, and [H₂Ni₃₁P₄(CO)₃₉]^4-. The reversible formation of the stable [Ni₁₁P(CO)₁₈]^4- tetra-anion is demonstrated through the spectroelectrochemical investigation of [Ni₁₁P(CO)₁₈]^3-. The redox changes of [HNi₃₁P₄(CO)₃₉]^5- show features of chemical reversibility and the vibrational spectra in the ν_CO region of the nine redox states of the cluster [HNi₃₁P₄(CO)₃₉]^n- (n = 3-11) are reported. The spectroelectrochemical investigation of [H₂Ni₃₁P₄(CO)₃₉]^4- revealed the presence of three chemically reversible reduction processes, and the IR spectra of [H₂Ni₃₁P₄(CO)₃₉]^n- (n = 4-7) have been recorded. The different spectroelectrochemical behavior of [HNi₃₁P₄(CO)₃₉]^5- and [H₂Ni₃₁P₄(CO)₃₉]^4- support their formulations as polyhydrides. Unfortunately, all the attempts to directly confirm their poly hydrido nature by ¹H NMR spectroscopy failed, as previously found for related large metal carbonyl clusters. Thus, the presence and number of hydride ligands have been based on the observed protonation/deprotonation reactions and the spectroelectrochemical experiments. The molecular structures of the new clusters have been determined by single-crystal X-ray analysis. These represent the first examples of structurally characterized molecular nickel carbonyl nanoclusters containing interstitial phosphide atoms.

Structural rearrangements induced by acid-base reactions in metal carbonyl clusters: the case of [H(3-n)Co15Pd9C3(CO)38]n- (n = 0-3)

The new bimetallic [HCo15Pd9C3(CO)38](2-) tri-carbide carbonyl cluster has been obtained from the reaction of [H2Co20Pd16C4(CO)48](4-) with an excess of acid in CH2Cl2 solution. The mono-hydride di-anion can be reversibly protonated and deprotonated by means of acid-base reactions leading to closely related [H(3-n)Co15Pd9C3(CO)38](n-) (n = 0-3) clusters. The crystal structures of the three anionic and the neutral clusters have been determined as their H3Co15Pd9C3(CO)38·2thf, [NEt4][H2Co15Pd9C3(CO)38]·0.5C6H14, [NMe3(CH2Ph)]2[HCo15Pd9C3(CO)38]·C6H14 and [NEt4]3[Co15Pd9C3(CO)38]·thf salts. They are composed of a Pd9(μ3-CO)2 core stabilised by three Co5C(CO)12 organometallic fragments. The poly-hydride nature of these clusters has been indirectly inferred via chemical, electrochemical and magnetic measurements. Besides, cyclic voltammetry shows that the [H(3-n)Co15Pd9C3(CO)38](n-) (n = 1-3) anions are multivalent, since they undergo two or three reversible oxidations. SQUID measurements of [HCo15Pd9C3(CO)38](2-) indicate that this even electron cluster is paramagnetic with two unpaired electrons, giving further support to its hydride nature. Finally, structural studies show that the Pd9 core of [H(3-n)Co15Pd9C3(CO)38](n-) (n = 0,1) is a tri-capped octahedron, which becomes a tri-capped trigonal prism in the more charged [H(3-n)Co15Pd9C3(CO)38](n-) (n = 2,3) anions. Such a significant structural rearrangement of the metal core of a large carbonyl cluster upon protonation-deprotonation reactions is unprecedented in cluster chemistry, and suggests that interstitial hydrides may have relevant stereochemical effects even in large carbonyl clusters.