Influence of the Amount of Hydrogen Fluoride on the Formation of (001)-Faceted Titanium Dioxide Nanosheets and Their Photocatalytic Hydrogen Generation Performance

Adsorption and Mechanism of Glycine on the Anatase with Exposed (001) and (101) Facets

As a widely existing mineral types on Earth, semiconductor minerals play an important role in the origin of life and the material geochemical cycle. The first step of peptide formation is amino acid adsorption on the mineral surface, but the role and mechanism of different crystal facets of semiconductor minerals are not well understood. Anatase (TiO2) with exposed (001) facets was synthesized by a hydrothermal method, and then analyzed and compared with the purchased ordinary anatase (TiO2) for the adsorption of glycine, the simplest amino acid. XRD, SEM and TEM results show that the hydrothermally synthesized anatase (TiO2) has a good anatase crystal form, which is micro-nano-scale flake particles and mainly composed of (001) facets. The results of HPLC used in the adsorption experiment showed that under optimal conditions (pH 5 to 6, an adsorption time of 24 h, and an initial concentration of 0.09 mol/L), the adsorption quantity of glycine on anatase (TiO2) with exposed (001) facets may reach 10 mg/m2, which is larger than that for ordinary anatase (TiO2) with exposed (101) facets. Based on a combination of various characterizations and simulation calculations, the results proved that anatase can activate thermodynamically stable γ-glycine to β-glycine. The adsorption of glycine on anatase (TiO2) has two forms, one is the zwitterionic form in which the carboxyl group forms a bridge structure with two Ti atoms connected by surface bridging oxygen, and the dissociated form is in which the amino group forms a bond with the surface Ti atom. Among these, glycine is mainly adsorbed to anatase by dissociative molecules on the anatase (TiO2) with exposed (001) facets and by zwitterion adsorption on the anatase (TiO2) with exposed (101) facets. This research elucidates the conditions and mechanism of amino acid adsorption by semiconductor minerals in weak acidic environment, which is similar to the environmental pH that was beneficial to the formation of life on the early Earth. Therefore, these can provide a reference for the further study of the role of semiconductor minerals in the adsorption and polymerization of small biomolecules in the origin of life.

Preparation of F-doped H2Ti3O7-{104} nanorods with oxygen vacancies using TiOF2 as precursor and its photocatalytic degradation activity

Photocatalytic degradation is an eco-friendly and sustainable method for the treatment of water pollutants especially tetracycline hydrochloride (TCH). Herein, we developed F-doped H2Ti3O7-{104} nanorods with oxygen vacancies using TiOF2 as a precursor by simple alkali hydrothermal and ion-exchange methods. The phase structure, surface composition, optical properties, specific surface areas and charge separation were analysed by a series of measurements. The effects of KOH concentration on the structure and properties of H2Ti3O7 were investigated. It is confirmed that the TiOF2/H2Ti3O7 composite can be formed in low concentration KOH solution (1 mol L-1), while the H2Ti3O7 single phase can be formed in high concentration KOH solution (>3 mol L-1). The prepared F-doped H2Ti3O7-{104} nanorods provide a high specific surface area of 457 m2 g-1 and a macroporous volume of 0.69 cm3 g-1. The appropriate mesoporous structure of the photocatalyst makes TCH have a stronger affinity on its surface, which is more conducive to the subsequent photodegradation. Moreover, a synergistic mechanism of photosensitization and ligand-metal charge transfer (LMCT) in the photocatalytic degradation of TCH was proposed. In addition, the prepared F-doped H2Ti3O7-{104} nanorods showed excellent cycle stability and resistance to light corrosion. After five cycles of photodegradation, the degradation rate of TCH was only reduced from 92% to 83%. This low-cost strategy could be used for the mass production of efficient photocatalysts, which can be used for TCH clean-up in wastewater treatment.

A three-dimensional nano-network WO3/F-TiO2-{001} heterojunction constructed with OH-TiOF2 as the precursor and its efficient degradation of methylene blue

In this study, three-dimensional nested WO3/F-TiO2-{001} photocatalysts with different WO3 loadings were prepared by a hydrothermal process and used to degrade methylene blue (MB). The photocatalysts with various ratios of WO3 to OH-TiOF2 can be transformed into a three-dimensional network WO3/F-TiO2 hetero-structure with {001} surface exposure. The results showed that the composite catalyst with 5% WO3, denoted as FWT5, had the best comprehensive degradation effect. FWT5 has a limited band gap of 2.9 eV, which can be used as an advanced photocatalyst to respond to sunlight and degrade MB. The average pore diameter of the composite catalyst is 10.3 nm, and the multi-point specific surface area is 56 m2 g-1. Compared with pure TiOF2, the average pore size of the composite catalyst decreased by 8.44 nm and the specific surface area increased by 51.2 m2 g-1, which provides a larger contact space for the catalytic components and pollutants. Moreover, TiO2 on the {001} surface has higher photocatalytic activity and methylene blue can be better degraded. Under the irradiation of 0.03 g FWT5 composite catalyst with a simulated solar light source for 2 h, the degradation rate of 10 mg L-1 methylene blue can reach 82.9%. The trapping experiment showed that photo-generated holes were the principal functional component of WO3/F-TiO2-{001} photo-catalysis, which could capture OH- and form hydroxyl radical (˙OH) and improved the photocatalytic degradation performance. Kinetic studies show that the photocatalytic degradation of MB fits with the quasi-first order kinetic model.

Preparation of hydrogen, fluorine and chlorine doped and co-doped titanium dioxide photocatalysts: a theoretical and experimental approach

Titanium dioxide (TiO₂) has a strong photocatalytic activity in the ultra-violet part of the spectrum combined with excellent chemical stability and abundance. However, its photocatalytic efficiency is prohibited by limited absorption within the visible range derived from its wide band gap value and the presence of charge trapping states located at the band edges, which act as electron–hole recombination centers. Herein, we modify the band gap and improve the optical properties of TiO₂ via co-doping with hydrogen and halogen. The present density functional theory (DFT) calculations indicate that hydrogen is incorporated in interstitial sites while fluorine and chlorine can be inserted both as interstitial and oxygen substitutional defects. To investigate the synergy of dopants in TiO₂ experimental characterization techniques such as Fourier transform infrared (FTIR), X-ray diffraction (XRD), X-ray and ultra-violet photoelectron spectroscopy (XPS/UPS), UV–Vis absorption and scanning electron microscopy (SEM) measurements, have been conducted. The observations suggest that the oxide’s band gap is reduced upon halogen doping, particularly for chlorine, making this material promising for energy harvesting devices. The studies on hydrogen production ability of these materials support the enhanced hydrogen production rates for chlorine doped (Cl:TiO₂) and hydrogenated (H:TiO₂) oxides compared to the pristine TiO₂ reference.

Probing the formation and optical properties of Ti3+–TiO2 with (001) exposed crystal facet by ethanol-assisted fluorination

(001)-faceted TiO₂ with Ti³⁺ defects that are exclusively embedded in the bulk lattice near the surface was synthesized.

Engineering Z-system hybrids of 0D/2D F-TiO2 quantum dots/g-C3N4 heterostructures through chemical bonds with enhanced visible-light photocatalytic performance

A Z-system hybrid of F-TiO₂ quantum dots/g-C₃N₄ nanosheets with an effective pathway (C–O bond) for charge transfer and selective recombination was constructed.

Transformation of novel TiOF2 nanoparticles to cluster TiO2-{001/101} and its degradation of tetracycline hydrochloride under simulated sunlight

The anatase type cluster TiO₂-{001/101} was rapidly generated by a one-step hydrothermal method. The transformation process of coral-like TiOF₂ nanoparticles to cluster TiO₂-{001/101} was investigated for the first time, and the sensitization between cluster TiO₂-{001/101} and tetracycline hydrochloride (TCH) was also discussed. The degradation rate of TCH by cluster TiO₂-{001/101} under simulated sunlight was 92.3%, and the total removal rate was 1.76 times that of P25. Besides, cluster TiO₂-{001/101} settles more easily than P25 in deionized water. The study showed that cluster TiO₂-{001/101} derived from coral-like TiOF₂ nanoparticles had a strong adsorption effect on TCH, which was attributed to the oxygen vacancy (O_v) and {001} facets of cluster TiO₂-{001/101}. The strong adsorption effect promoted the sensitization between cluster TiO₂-{001/101} and TCH, and widened the visible light absorption range of cluster TiO₂-{001/101}. In addition, the fluorescence emission spectrum showed that cluster TiO₂-{001/101} had a lower luminous intensity, which was attributed to the heterojunction formed by {001} facets and {101} facets that reduces the recombination rate of carriers. It should be noted that cluster TiO₂-{001/101} still has good degradation performance for TCH after five cycles of degradation. This study provides a new idea for the synthesis of cluster TiO₂-{001/101} with high photocatalytic performance for the treatment of TCH wastewater.

Degradation of tetracycline hydrochloride by cluster TiO₂-{001/101} under simulated sunlight.

Insights into the formation mechanism of two-dimensional lead halide nanostructures

We present a colloidal synthesis strategy for lead halide nanosheets with a thickness of far below 100 nm. Due to the layered structure and the synthesis parameters the crystals of PbI₂ are initially composed of many polytypes. We propose a mechanism which gives insight into the chemical process of the PbI₂ formation. Further, we found that the crystal structure changes with increasing reaction temperature or by performing the synthesis for longer time periods changing for the final 2H structure. In addition, we demonstrate a route to prepare nanosheets of lead bromide as well as lead chloride in a similar way. Lead halides can be used as a detector material for high-energy photons including gamma and X-rays.

Quick and facile preparation of visible light-driven TiO2 photocatalyst with high absorption and photocatalytic activity

Self-doping TiO₂ has recently attracted considerable attention for its high photocatalytic activity under visible-light irradiation. However, the literature reported synthetic methods until now were very time-consuming. In this study, we establish a quick and facile method for obtaining self-doping TiO₂ with the use of directly treated commercial P25 at a desired temperature for only 5 min through spark plasma sintering technology. With the using of this method, the modified P25 samples exhibit significantly high photoelectric and photocatalytic performance. Furthermore, the sample prepared at 600°C exhibits the optimum catalytic activity. The photodegradation and H₂ evolution rates of this samples are significantly higher than those of unmodified P25 sample under visible-light irradiation. The physical origin of the visible-light absorption for the modified P25 samples is investigated in detail according to their structural, optical, and electronic properties. This work will provide a quick and facile method for the large-scale synthesis of visible-light driven photocatalyst for practical applications.