The Solvent Effect on Weak Interactions in Supramolecular Polymers: Differences between Small Molecular Probes and Supramolecular Polymers

Preparation of a New Hexafluorobutanol-Farnesol Based Supramolecular Solvent and Its Application in Microextraction of Sudan Dyes From Beverage and Water Samples

In this work, a new supramolecular solvent (SUPRAS) was prepared for the first time using hexafluorobutanol (HFB) and farnesol (FO). FO acts as an amphiphile and HFB as a coacervation inducer and density regulator. The method of dispersive liquid-liquid microextraction followed by high-performance liquid chromatography, supported by a vortex technique, was established using the prepared SUPRAS for the determination of Sudan dyes in aqueous samples. The extraction parameters, including FO content, HFB content, vortex time, salt addition, and solution pH, were thoroughly investigated and optimized. Under the optimized conditions, the linearity range is 10-750 ng/mL for Sudan I, and 10-1000 ng/mL for Sudan III and Sudan IV, respectively. The limits of detection for Sudan dyes were in the range of 0.8-3.1 ng/mL. The inter- and intra-day relative standard deviations for Sudan dyes were in the range of 1.3%-4.1% and 0.2%-2.6%, respectively. Finally, the proposed method was applied to the determination of Sudan dyes in beverage and river water samples with recoveries ranging from 93.9% to 122.1%. Compared to conventional techniques for the extraction of Sudan dyes in real samples, the proposed method is simpler, faster, and more environmentally friendly.

A General Strategy for Food Traceability and Authentication Based on Assembly-Tunable Fluorescence Sensor Arrays

Food traceability and authentication systems play an important role in ensuring food quality and safety. Current techniques mainly rely on direct measurement by instrumental analysis, which is usually designed for one or a group of specific foods, not available for various food categories. To develop a general strategy for food identification and discrimination, a novel method based on fluorescence sensor arrays is proposed, composed of supramolecular assemblies regulated by non-covalent interactions as an information conversion system. The stimuli-responsiveness and tunability of supramolecular assemblies provided an excellent platform for interacting with various molecules in different foods. In this work, five sensor arrays constructed by supramolecular assemblies composed of pyrene derivatives and perylene derivatives are designed and prepared. Assembly behavior and sensing mechanisms are investigated systematically by spectroscopy techniques. The traceability and authentication effects on several kinds of food from different origins or grades are evaluated and verified by linear discriminant analysis (LDA). It is confirmed that the cross-reactive signals from different sensor units encompassing all molecular interactions can generate a unique fingerprint pattern for each food and can be used for traceability and authentication toward universal food categories with 100% accuracy.

Recycling and 3D-Printing Biodegradable Membranes for Gas Separation-toward a Membrane Circular Economy

Polymer membranes employed in gas separation play a pivotal role in advancing environmental sustainability, energy production, and gas purification technologies. Despite their significance, the current design and manufacturing of these membranes lack cradle-to-cradle approaches, contributing to plastic waste pollution. This study explores emerging solutions, including the use of biodegradable biopolymers such as polyhydroxybutyrate (PHB) and membrane recycling, with a focus on the specific impact of mechanical recycling on the performance of biodegradable gas separation membranes. This research represents the first systematic exploration of recycling biodegradable membranes for gas separation. Demonstrating that PHB membranes can be recycled and remanufactured without solvents using hot-melt extrusion and 3D printing, the research highlights PHB's promising performance in developing more sustainable CO2 separations, despite an increase in gas permeability with successive recycling steps due to reduced polymer molecular weight. The study emphasizes the excellent thermal, chemical, and mechanical stability of PHB membranes, albeit with a marginal reduction in gas selectivity upon recycling. However, limitations in PHB's molecular weight affecting extrudability and processability restrict the recycling to three cycles. Anticipating that this study will serve as a foundational exploration, we foresee more sophisticated recycling studies for gas separation membranes, paving the way for a circular economy in future membrane technologies.

Investigation of J-Aggregates of 2,3,7,8,12,13,17,18-Octabromo-5,10,15,20-tetrakis(4-sulfonatophenyl) Porphyrin in Aqueous Solutions

The highly distorted water-soluble 2,3,7,8,12,13,17,18-octabromo-5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (Br8TPPS44-) is readily protonated under acidic pH, forming the diacid H2Br8TPPS42- and subsequently the zwitterionic H4Br8TPPS4, which eventually evolves into J-aggregates. These latter species exhibit a relevant bathochromic shift with respect to the monomer with a quite sharp band due to motional narrowing. The depolarization ratio measured in resonant light scattering spectra allows estimating a tilt angle of ~20° of the porphyrins in the J-aggregate. The kinetic parameters are obtained by applying a model based on the initial slow nucleation step, leading to a nucleus containing m monomers, followed by fast autocatalytic growth. The kc values for this latter step increase on decreasing the acid concentration and on increasing the porphyrin concentration, with a strong power-law dependence. No spontaneous symmetry breaking or transfer of chirality from chiral inducers is observed. Both Atomic Force Microscopy (AFM) and Dynamic Light Scattering (DLS) point to the presence, in both the solid and solution phases, of globular-shaped aggregates with sizes close to 130 nm. Density functional theory (DFT) calculations performed on simplified models show that (i) upon protonation, the saddled conformation of the porphyrin ring is slightly altered, and a further rotation of the aryl rings occurs, and (ii) the diacid species is more stable than the parent unprotonated porphyrin. Time-dependent DFT analysis allows comparing the UV/Vis spectra for the two species, showing a consistent red shift upon protonation, even if larger than the experimental one. The simulated Raman spectrum agrees with the experimental spectrum acquired on solid samples.

Photoresponsive Supramolecular Polymers: From Light-Controlled Small Molecules to Smart Materials

Photoresponsive supramolecular polymers are well-organized assemblies based on highly oriented and reversible noncovalent interactions containing photosensitive molecules as (co-)monomers. They have attracted increasing interest in smart materials and dynamic systems with precisely controllable functions, such as light-driven soft actuators, photoresponsive fluorescent anticounterfeiting and light-triggered electronic devices. The present review discusses light-activated molecules used in photoresponsive supramolecular polymers with their main photo-induced changes, e.g., geometry, dipole moment, and chirality. Based on these distinct changes, supramolecular polymers formed by light-activated molecules exhibit photoresponsive disassembly and reassembly. As a consequence, photo-induced supramolecular polymerization, "depolymerization," and regulation of the lengths and topologies are observed. Moreover, the light-controlled functions of supramolecular polymers, such as actuation, emission, and chirality transfer along length scales, are highlighted. Furthermore, a perspective on challenges and future opportunities is presented. Besides the challenge of moving from harmful UV light to visible/near IR light avoiding fatigue, and enabling biomedical applications, future opportunities include light-controlled supramolecular actuators with helical motion, light-modulated information transmission, optically recyclable materials, and multi-stimuli-responsive supramolecular systems.

Switchable metallacycles and metallacages

Two-dimensional metallacycles and three-dimensional metallacages constructed by coordination-driven self-assembly have attracted much attention because they exhibit unique structures and properties and are highly efficient to synthesize. Introduction of switching into supramolecular chemistry systems is a popular strategy, as switching can endow systems with reversible features that are triggered by different stimuli. Through this strategy, novel switchable metallacycles and metallacages were generated, which can be reversibly switched into different stable states with distinct characteristics by external stimuli. Switchable metallacycles and metallacages exhibit versatile structures and reversible properties and are inherently dynamic and respond to artificial signals; thus, these structures have many promising applications in a wide range of fields, such as drug delivery, data processing, pollutant removal, switchable catalysis, smart functional materials, etc. This review focuses on the design of switchable metallacycles and metallacages, their switching behaviours and mechanisms triggered by external stimuli, and the corresponding structural changes and resultant properties and functions.

The Contributions of Supramolecular Kinetics to Dynamics of Supramolecular Polymers

Supramolecular polymers exhibit well-controlled dynamics with fascinating capacity for remodeling, self-healing, and stimuli-responsiveness. Supramolecular kinetics of non-covalent bonds is a dominant control handle among the relevant factors to tailor dynamics of supramolecular polymers. This Review focuses on elucidating how supramolecular kinetics dictates the polymer dynamics in supramolecular polymer systems. The ways to tailor supramolecular kinetics are firstly examined as prerequisites for structure-activity study of supramolecular polymers. We next discuss the role of supramolecular kinetics in supramolecular polymers under different polymer architectures by the combination of both of theoretical and experimental studies. Finally, we conclude by discussing the existing challenges and opportunities in the current studies.

Adhesion behaviour of bulk supramolecular polymers via pillar[5]arene-based molecular recognition

Pillar[n]arenes were rarely used as the building blocks for supramolecular adhesives. Herein, pillar[5]arene-based supramolecular polymer materials with tough adhesion behaviours on different substrates were prepared, with adhesion strengths up to 4.75 MPa. Strong and long-term dichloromethane-resistant adhesion performances were successfully obtained.