A Composite Membrane Based on Sulfonated Polystyrene Implanted in a Stretched PTFE Film for Vanadium Flow Batteries

Electrochemical Measurement of Interfacial Distribution and Diffusion Coefficients of Electroactive Species for Ion-Exchange Membranes: Application to Br2/Br- Redox Couple

A novel method has been proposed for rapid determination of principal transmembrane transport parameters for solute electroactive co-ions/molecules, in relation to the crossover problem in power sources. It is based on direct measurements of current for the electrode, separated from solution by an ion-exchange membrane, under voltammetric and chronoamperometric regimes. An electroactive reagent is initially distributed within the membrane/solution space under equilibrium. Then, potential change induces its transformation into the product at the electrode under the diffusion-limited regime. For the chronoamperometric experiment, the electrode potential steps backward after the current stabilization, thus inducing an opposite redox transformation. Novel analytical solutions for nonstationary concentrations and current have been derived for such two-stage regime. The comparison of theoretical predictions with experimental data for the Br₂/Br^- redox couple (where only Br^- is initially present) has provided the diffusion coefficients of the Br^- and Br₂ species inside the membrane, D(Br^-) = (2.98 ± 0.27) 10^-6 cm²/s and D(Br₂) = (1.10 ± 0.07) 10^-6 cm²/s, and the distribution coefficient of the Br^- species at the membrane/solution boundary, K(Br^-) = 0.190 ± 0.005, for various HBr additions (0.125-0.75 M) to aqueous 2 M H₂SO₄ solution. This possibility to determine transport characteristics of two electroactive species, the initial solute component and its redox product, within a single experiment, represents a unique feature of this study.

Advancements of Polyvinylpyrrolidone-Based Polymer Electrolyte Membranes for Electrochemical Energy Conversion and Storage Devices

Polymer electrolyte membranes (PEMs) play vital roles in electrochemical energy conversion and storage devices, such as polymer electrolyte membrane fuel cell (PEMFC), redox flow battery, and water electrolysis. As the crucial component of these devices, PEMs need to possess high ion conductivity and electronic insulation, remarkable mechanical and chemical stability, and outstanding isolation function for the materials on both sides of the cathode and anode. Polyvinylpyrrolidone has received widespread attention in the research of PEMs owing to its tertiary amine basic groups and exceptional hydrophilic properties. This review focuses on the application status of polyvinylpyrrolidone-based PEMs in PEMFC, vanadium redox flow battery, and alkaline water electrolysis, and describes in detail the key scientific problems in these fields, providing constructive suggestions and guidance for the application of polyvinylpyrrolidone-based PEMs in electrochemical energy conversion and storage devices.

Synthesis and Characterization of Lithium-Conducting Composite Polymer-Ceramic Membranes for Use in Nonaqueous Redox Flow Batteries

Redox flow batteries (RFBs) are a burgeoning electrochemical platform for long-duration energy storage, but present embodiments are too expensive for broad adoption. Nonaqueous redox flow batteries (NAqRFBs) seek to reduce system costs by leveraging the large electrochemical stability window of organic solvents (>3 V) to operate at high cell voltages and to facilitate the use of redox couples that are incompatible with aqueous electrolytes. However, a key challenge for emerging nonaqueous chemistries is the lack of membranes/separators with suitable combinations of selectivity, conductivity, and stability. Single-ion conducting ceramics, integrated into a flexible polymer matrix, may offer a pathway to attain performance attributes needed for enabling competitive nonaqueous systems. Here, we explore composite polymer-inorganic binder-filler membranes for lithium-based NAqRFBs, investigating two different ceramic compounds with NASICON-type (NASICON: sodium (Na) superionic conductor) crystal structure, Li_1.3Al_0.3Ti_1.7(PO₄)₃ (LATP) and Li_1.4Al_0.4Ge_0.2Ti_1.4(PO₄)₃ (LAGTP), each blended with a polyvinylidene fluoride (PVDF) polymeric matrix. We characterize the physicochemical and electrochemical properties of the synthesized membranes as a function of processing conditions and formulation using a range of microscopic and electrochemical techniques. Importantly, the electrochemical stability window of the as-prepared membranes lies between 2.2-4.5 V vs Li/Li⁺. We then integrate select composite membranes into a single electrolyte flow cell configuration and perform polarization measurements with different redox electrolyte compositions. We find that mechanically robust, chemically stable LATP/PVDF composites can support >40 mA cm^-2 at 400 mV cell overpotential, but further improvements are needed in selectivity. Overall, the insights gained through this work begin to establish the foundational knowledge needed to advance composite polymer-inorganic membranes/separators for NAqRFBs.