Composite restorations placed in non-carious cervical lesions-Which cavity preparation is clinically reliable?

Effect of dentin roughening and type of composite material on the restoration of non-carious cervical lesions: an in vivo study with 18 months of follow-up

Objectives

The purpose of this study was to evaluate the impact of dentin roughening and the type of composite resin used (either bulk-fill flowable or nanohybrid) on the restoration of non-carious cervical lesions (NCCLs) with an 18-month follow-up period.

Materials and Methods

This prospective split-mouth study included 36 patients, each with a minimum of 4 NCCLs. For each patient, 4 types of restorations were performed: unroughened dentin with nanohybrid composite, unroughened dentin with bulk-fill flowable composite, roughened dentin with nanohybrid composite, and roughened dentin with bulk-fill flowable composite. A universal bonding agent (Tetric N Bond Universal) was applied in self-etch mode for all groups. The restorations were subsequently evaluated at 6, 12, and 18 months in accordance with the criteria set by the FDI World Dental Federation. Inferential statistics were computed using the Friedman test, with the level of statistical significance established at 0.05.

Results

The 4 groups exhibited no significant differences in relation to fracture and retention, marginal staining, marginal adaptation, postoperative hypersensitivity, or the recurrence of caries at any follow-up point.

Conclusions

Within the limitations of the present study, over an 18-month follow-up period, no significant difference was present in the clinical performance of bulk-fill flowable and nanohybrid composite restorations of non-carious cervical lesions. This held true regardless of whether dentin roughening was performed.

Effect of the Adhesive Strategy on Clinical Performance and Marginal Integrity of a Universal Adhesive in Non-Carious Cervical Lesions in a Randomized 36-Month Study

The effectiveness of a universal adhesive applied in three application modes for the preparation of Class V composite restorations was evaluated both clinically and by quantitative marginal analysis (QMA) over 36 months. In 50 patients, three (n = 21) or four (n = 29) non-carious cervical lesions (NCCL) were restored with Venus® Diamond Flow (Kulzer GmbH, Hanau, Germany). The adhesive iBond® Universal (iBU, Kulzer, Germany) was used in self-etch (SE), etch-and-rinse (ER), or selective-enamel-etch mode (SEE). The etch-and-rinse adhesive OptiBondTM FL served as a control (OFL, Kerr GmbH, Herzogenrath, Germany). The restorations were clinically assessed (FDI criteria) at 14 days (BL), 6, 12, 24, and 36 months. Additionally, QMA was conducted on all restorations of 11 randomly selected patients. FDI criteria and marginal gap and perfect margin were compared between and within groups and recalls using McNemar, Wilcoxon, or Mann-Whitney U-tests (α = 0.05). Starting with 12 months, cumulative failure rates were lower in iBU-SE (0.0%, p = 0.016) and iBU-ER groups (2.1%, p = 0.07) compared to OFL (16.7%). At two years, iBU-SEE also showed fewer failures (0.0% SEE vs. 34.6% OFL, p = 0.016), as did iBU-SE compared to iBU-ER after 36 months (2.2 and 19.6%, p = 0.039). From BL, the iBU-SEE group always had the fewest marginal gaps and the highest percentage of perfect margins. From BL, iBU-SEE (0%, p = 0.008) and iBU-ER (0.2%, p = 0.027) showed significantly fewer marginal gaps compared to OFL (2.5%) and more perfect margins were found with iBU-SEE starting at 6 months (p = 0.054). The SEE and ER modes ensured the most excellent marginal quality, with differences from the control appearing earlier with QMA than clinically. In restoring NCCls, iBU showed superior clinical performance over OFL, especially in modes SE and SEE.

Stereomicroscopic Aspects of Non-Carious Cervical Lesions

Non-carious cervical lesions (NCCLs) represent a form of tooth wear, characterized by the irreversible loss of dental hard tissues at the enamel-cement junction, without the involvement of caries and dental trauma. The aim of this study was to highlight the morphological elements of NCCLs via their stereomicroscopic examination and to confirm the role of this examination in the diagnosis of early lesions. In addition, the association between the morphological aspects identified during the stereomicroscopic examination of NCCLs and their etiological factors was determined. For this study, extracted teeth with NCCLs were examined with a stereomicroscope. The morphological aspects of NCCLs were evaluated at magnifications up to 75×. In wedge-shaped NCCLs, the stereomicroscopic examination allowed the identification and measurement of scratches, furrows and cracks. In saucer-shaped NCCLs, the stereomicroscopic examination highlighted the smooth appearance of the walls. The presented study highlighted the role of stereomicroscopic examination in the assessment of NCCL morphology and in their early diagnosis. The study confirmed, in particular, the role of occlusal overloads and tooth brushing in determining the morphology of NCCLs.

Conservative Treatment of Dental Non-Carious Cervical Lesions: A Scoping Review

This scoping review aims to evaluate methods of conservative reconstruction of dental enamel lesions resulting from abrasions and evaluate the effect of diode laser in reducing the symptoms of tooth sensitivity. The cementoenamel junction is more prone to substance loss because the enamel thickness is substantially decreased, resulting in a much weaker enamel-dentin bond.

METHODS

Dental abrasion was examined in the mechanical cause alone. Pubmed, Scopus, and Web of Science were used to discover publications that matched our topic from 1 January 2018 to 20 March 2023. A comparison of various non-carious cervical lesion (NCCL) restoration treatments was generated mostly by mechanical considerations.

RESULTS

A final number of 11 clinical trials and randomized controlled trials were included in the review for qualitative analysis. Composite resins performed well in clinical trials for the restoration of NCCLs.

CONCLUSIONS

Composite, in its different forms of filling and consistency, preceded by the use of adhesives, is an efficient and effective material for the treatment of NCCLs. Diode laser use prior to NCCL restoration of teeth does not diminish restoration retention rate, may lessen hypersensitivity, and may affect restoration success.

Influence of carbonated acid beverage on fracture resistance and marginal gap formation in different restorative approaches to non-carious cervical lesions

OBJECTIVE

This study is to evaluate fracture resistance, failure mode, and gap formation at the restorative interface of unrestored or restored non-carious cervical lesions (NCCLs) submitted to a short-term erosive environment.

MATERIALS AND METHODS

Artificial NCCLs were produced in vitro in bovine incisors, and were randomly divided into four restorative resins groups (n = 22): nanohybrid-NR; bulk-fill-BR; flow with a nanohybrid layer-FNR; bulk-fill with a nanohybrid layer-BNR; and a group unrestored-UR (n = 16). Half of the specimens were submitted to an erosive challenge (per 5 min, 3 × a day for 7 days, before and after restoration), and the other half, was immersed in artificial saliva. After, all teeth undergone thermal (5 ºC, 37 ºC, and 55 ºC, 3600 cycles) and mechanical (50 N, 2 Hz, 300,000 cycles) aging. Eighty teeth were subjected to compressive loading, and resistance and failures were analyzed, while 24 teeth were evaluated for gaps by microcomputed tomography. Statistical tests were performed (p < 0.05).

RESULTS

The restorative approaches affected fracture resistance (η2p = 0.14, p = 0.023), and gap formation (η2 = 0.18, p = 0.012) and so did the immersion medium (fracture η2p = 0.09, p = 0.008; gap η2 = 0.09, p = 0.017). BNR showed the highest resistance, while UR the lowest. FNR showed the highest gaps in both immersion media. Neither the resin groups nor the immersion media were associated with failure mode.

CONCLUSIONS

The erosive immersion medium based in acid beverages has been shown to affect NCCLs with or without restoration, but when Bulk-Fill resin is covered by nanohybrid resin, the performance is good.

CLINICAL RELEVANCE

Erosion negatively affects restorations, but unrestored NCCL shows worse biomechanical performance in stress-bearing situations.

Morphological and Optical Coherence Tomography Aspects of Non-Carious Cervical Lesions

Non-carious cervical lesions (NCCLs) are considered the irreversible losses of dental hard tissues at the cemento-enamel junction, in the absence of acute trauma and dental caries. The aim of this study was to highlight the presence of NCCLs in cervical areas based on specific macroscopic aspects in order to establish their clinical form, size and location and to confirm the role of optical coherence tomography (OCT) examination in the early diagnosis of these lesions. For this study, 52 extracted teeth were used, which did not have endodontic treatments, fillings or carious lesions in the cervical area. All teeth were examined macroscopically and OCT was used to evaluate the degree of occlusal wear, the presence and clinical form of NCCLs. Most NCCLs were identified on the buccal surfaces of the premolars. The most frequently encountered clinical form was the wedge-shaped form, with a radicular location. NCCLs present most frequently in the wedge-shaped form. Teeth that presented several NCCLs were identified. The OCT examination is an adjunct method to evaluate the clinical forms of NCCL.

Evaluation of a novel restorative protocol to treat non-carious cervical lesion associated with gingival recession: a 2-year follow-up randomized clinical trial

OBJECTIVE

To compare 2 different resin composites and 2 adhesive systems used in a new restorative protocol (partial restoration) to treat non-carious cervical lesions associated with gingival recession type 1 (RT1).

MATERIAL AND METHODS

Eighty combined defects (CDs) were treated with a partial restoration and periodontal plastic surgery for root coverage. The CDs were randomly assigned to one of the following groups: NP + TE (n = 20), nanofilled composite and 2-step total-etch adhesive system; NP + UA (n = 20), nanofilled composite and universal adhesive system; MH + TE (n = 20), microhybrid composite and 2-step total-etch adhesive; MH + UA (n = 20), microhybrid composite and universal adhesive. Restorations were assessed using the United States Public Health Service (USPHS) criteria at 1 week (baseline) and 6, 12, and 24 months. Survival rate, periodontal parameters, dentin hypersensitivity (DH), and aesthetics were also evaluated.

RESULTS

After 24 months, only the MH + TE group did not lose any restoration, with no significant differences between groups. For surface roughness parameter, MH presented 83.3% of the restorations scoring Bravo, whereas NP presented 48.5% of the restorations scoring Bravo. All groups presented restorations with marginal discoloration. All periodontal parameters behaved similarly, regardless of the restorative material. All groups presented significant reductions of dentin hypersensitivity and improved aesthetic perceptions (p < 0.05).

CONCLUSION

Both resin composites and adhesives tested can be combined for partial restorations to treat CDs.

CLINICAL RELEVANCE

This new restorative-surgical protocol to treat CDs presents satisfactory outcomes. The partial restorations can be successfully executed with both combinations of adhesives and resin composites evaluated in this investigation. TRN : ClinicalTrial.gov: NCT03215615; registration date July 12, 2017.

Clinical Outcomes and Quantitative Margin Analysis of a Universal Adhesive Using a Randomized Clinical Trial over Three Years

The effectiveness of a universal adhesive applied in different application modes for the preparation of Class V composite restorations was evaluated both clinically and by quantitative marginal analysis (QMA). In each of the 22 patients, four non-carious cervical lesions (NCCL) were restored with Filtek^™ Supreme XTE (3M). The adhesive Scotchbond^™ Universal (SBU, 3M) was applied in self-etch (SE), selective-enamel-etch (SEE) or etch-and-rinse (ER) modes. The etch-and-rinse adhesive OptiBond^™ FL (OFL, Kerr) served as a control. The restorations were clinically evaluated (FDI criteria) after 14 days (BL), 6, 12, 24, and 36 months. Additionally, QMA was conducted on all restorations of 11 randomly selected patients. The FDI criteria and marginal gap were statistically compared between the groups at each recall as well as for the time periods between recalls. The cumulative failure rate was non-significantly higher in the OFL group when compared to all of the SBU groups. Marginal adaptation in the OFL and SBU-SE/ER groups was significantly decreased (BL-36 m, p: 0.004) in comparison to the SBU-SEE group (BL-36 m, p: 0.063). More marginal gaps were found in the OFL group than in the SBU-SEE (BL to 36 m, p: 0.063-0.003) and SBU-ER (24/36 m, p: 0.066/0.005) groups as well as in the SBU-SE group when compared to the SBU-SEE (12-36 m, p_i ≤ 0.016) and SBU-ER (24/36 m, p: 0.055/0.001) groups. SBU-SEE performed most effectively. The clinical evaluation and QMA corresponded, yet QMA detected group differences earliest after 6 months and is thus a valuable extension to clinical evaluations.

Composite restorations placed in non-carious cervical lesions-Which cavity preparation is clinically reliable?

The purpose of this in-vivo study was to evaluate the clinical performance of restorations placed in non-carious cervical lesions (NCCLs), using different cavity preparation designs, after 7.7 years. A total of 85 NCCLs with coronal margins in enamel and cervical margins in dentin were randomly assigned to the following treatment protocols: dentin surface cleaning, dentin surface roughening with round bur plus flowable composite, dentin surface roughening/cervical groove preparation with round bur, dentin surface roughening/cervical groove preparation with round bur plus flowable composite. After enamel beveling and selective enamel etching, the defects were restored with composite. The restorations were assessed by two independent, calibrated and blinded investigators, using modified USPHS criteria. At 7 years (7.7 (± 0.35)), a total of 64 restorations (75.3%) were available for follow-up examination. The total retention rate, irrespective of the test groups, was 82.8%. Restorations placed without any preparation showed the highest loss rate (27.8%). Esthetic appearance, marginal adaptation, anatomic form and marginal discoloration did not differ significantly between the groups. Composites are long-term stable materials for restoring NCCLs. Restorations placed without any dentin preparation (cavity cleaning only) showed the highest loss rate.