Hydrogen evolution from water/alcohol mixtures: effective in situ generation of an active Au/TiO2 catalyst

Induced-aggregates in photocatalysis: An unexplored approach to reduce the noble metal co-catalyst content

Photocatalysis has emerged as a promising and environmentally sustainable solution to produce high-purity hydrogen through ethanol photoreforming. It is commonly accepted that adding co-catalysts, especially noble metals, significantly enhances the catalytic activity of semiconductors. However, the high cost of noble metals such as Pt may limit the real application of this emerging technology. Here we evaluate the possibility of reducing the noble metal loading by creating the appropriate interface between pre-formed semiconductor nanoparticles. Commercial titania (P25) was selected as the semiconductor due to its commercial availability, facilitating the straightforward validation and corroboration of our results. Pt was selected as co-catalyst because one of the most efficient photocatalysts for the ethanol photo-reforming is still based on the use of P25 in combination with Pt. We report that the creation of induced aggregates dramatically improves the total hydrogen produced when very low loadings (≤0.05 wt%) of Pt are used. We have developed a pioneering reactor designed for conducting photoluminescence studies under authentic operational conditions of nanoparticle suspensions in the liquid phase. This approach allows us to obtain the average photoluminescence emission from the P25 agglomerates what it would be impossible to obtain by using standard solid samples holders. Thanks to this equipment, we can conclude that this remarkable improvement of the activity is mainly due to creation of an interface that favors the charge transfer between the particles of the aggregates. According to this, the titania nanoparticles of the agglomerates act as an antenna to collect the photons of the sun-light and produce the photo-excited electrons that will be transferred to the platinum nanoparticles located in the same agglomeration. In contrast, raw P25 with low loadings of Pt would have a high number of titania nanoparticles without platinum, and therefore, inactive. This result would be especially relevant in the case of immobilized photocatalytic systems for real future photocatalytic reactors because the immobilization of the semiconductors would generate similar interactions to the one created by our method. Consequently, the initial semiconductor immobilization followed by the subsequent photo-deposition of the co-catalyst emerges as a promising approach for a substantial reduction of the co-catalyst content.

Spatial Confinement of Pt Nanoparticles in Carbon Nanotubes for Efficient and Selective H2 Evolution from Methanol

H2 generation from methanol-water mixtures often requires high pressure and high temperature (200-300 °C). However, CO can be easily generated and poison the catalytic system under such high temperature. Therefore, it is highly desirable to develop the efficient catalytic systems for H2 production from methanol at room temperature, even at sub-zero temperatures. Herein, carbon nanotube-supported Pt nanocomposites are designed and synthesized as high-performance nano-catalysts, via stabilization of Pt nanoparticles onto carbon nanotube (CNT), for H2 production upon methanol dehydrogenation at sub-zero temperatures. Therein, the optimal Pt/CNT nanocomposite presents the superior catalytic performance in H2 production upon methanol dehydrogenation at the expense of B2(OH)4, with the TOF of 299.51 min-130 oC. Compared with other common carriers, Pt/CNT exhibited the highest catalytic performance in H2 production, emphasizing the critical role of CNT in methanol dehydrogenation. The confinement of Pt nanoparticles by CNTs is conducive to inhibiting the aggregation of Pt nanoparticles, thereby significantly increasing its catalytic performance and stability. The kinetic study, detailed mechanistic insights, and density functional theory (DFT) calculation confirm that the breaking of O─H bond of CH3OH is the rate-controlling step for methanol dehydrogenation, and both H atoms of H2 are supplied by methanol. Interestingly, H2 is also successfully produced from methanol dehydrogenation at -10 °C, which absolutely solves the freezing problem in the H2 evolution upon water-splitting reaction.

Synergistic Effect of Pd Co-Catalyst and rGO–TiO2 Hybrid Support for Enhanced Photoreforming of Oxygenates

Photoreforming biomass-derived waste such as glycerol into hydrogen fuel is a renewable hydrogen generation technology that has the potential to become important due to unavoidable CO2 production during methane steam reforming. Despite tremendous efforts, the challenge of developing highly active photocatalysts at a low cost still remains elusive. Here, we developed a novel photocatalyst with a hybrid support comprising reduced graphene oxide (rGO) and TiO2 nanorods (TNR). rGO in the hybrid support not only performed as an excellent scavenger of electrons from the semiconductor conduction band due to its suitable electrochemical potential, but also acted as an electron transport highway to the metal co-catalyst, which otherwise is not possible by simply increasing metal loading due to the shadowing effect. A series of hybrid supports with different TNR and rGO ratios were prepared by the deposition method. Pd nanoparticles were deposited over hybrid support through the chemical reduction method. Pd/rGO-TNRs photocatalyst containing 4 wt.% rGO contents in the support and 1 wt.% nominal Pd loading demonstrated hydrogen production activity ~41 mmols h−1g−1, which is 4 and 40 times greater than benchmark Au/TiO2 and pristine P25. The findings of this works provide a new strategy in optimizing charge extraction from TiO2, which otherwise has remained impossible due to a fixed tradeoff between metal loading and the detrimental shadowing effect.

Integrated Photocatalytic Reduction and Oxidation of Perfluorooctanoic Acid by Metal-Organic Frameworks: Key Insights into the Degradation Mechanisms

The high porosity and tunability of metal-organic frameworks (MOFs) have made them an appealing group of materials for environmental applications. However, their potential in the photocatalytic degradation of per- and polyfluoroalkyl substances (PFAS) has been rarely investigated. Hereby, we demonstrate that over 98.9% of perfluorooctanoic acid (PFOA) was degraded by MIL-125-NH₂, a titanium-based MOF, in 24 h under Hg-lamp irradiation. The MOF maintained its structural integrity and porosity after three cycles, as indicated by its crystal structure, surface area, and pore size distribution. Based on the experimental results and density functional theory (DFT) calculations, a detailed reaction mechanism of the chain-shortening and H/F exchange pathways in hydrated electron (e_aq^-)-induced PFOA degradation were revealed. Significantly, we proposed that the coordinated contribution of e_aq^- and hydroxyl radical (^•OH) is vital for chain-shortening, highlighting the importance of an integrated system capable of both reduction and oxidation for efficient PFAS degradation in water. Our results shed light on the development of effective and sustainable technologies for PFAS breakdown in the environment.

A simple and efficient in situ generated copper nanocatalyst for stereoselective semihydrogenation of alkynes

Development of a simple, effective, and practical method for (Z)-selective semihydrogenation of alkynes has been considered necessary for easy-to-access applications at organic laboratory scales. Herein, (Z)-selective semihydrogenation of alkynes was achieved using a copper nanocatalyst which was generated in situ simply by adding ammonia borane to an ethanol solution of copper sulfate. Different types of alkynes including aryl-aryl, aryl-alkyl, and aliphatic alkynes were selectively reduced to (Z)-alkenes affording up to 99% isolated yield. The semihydrogenation of terminal alkynes to alkenes and gram-scale applications were also reported. In addition to eliminating catalyst preparation, the proposed approach is simple and practical and serves as a suitable alternative method to the conventional Lindlar catalyst.

Artificial Photosynthesis with Polymeric Carbon Nitride: When Meeting Metal Nanoparticles, Single Atoms, and Molecular Complexes

Artificial photosynthesis for solar water splitting and CO₂ reduction to produce hydrogen and hydrocarbon fuels has been considered as one of the most promising ways to solve increasingly serious energy and environmental problems. As a well-documented metal-free semiconductor, polymeric carbon nitride (PCN) has been widely used and intensively investigated for photocatalytic water splitting and CO₂ reduction, owing to its physicochemical stability, visible-light response, and facile synthesis. However, PCN as a photocatalyst still suffers from the fast recombination of electron-hole pairs and poor water redox reaction kinetics, greatly restricting its activity for artificial photosynthesis. Among the various modification approaches developed so far, decorating PCN with metals in different existences of nanoparticles, single atoms and molecular complexes, has been evidently very effective to overcome these limitations to improve photocatalytic performances. In this Review article, a systematic introduction to the state-of-the-art metal/PCN photocatalyst systems is given, with metals in versatility of nanoparticles, single atoms, and molecular complexes. Then, the recent processes of the metal/PCN photocatalyst systems in the applications of artificial photosynthesis, e.g., water splitting and CO₂ reduction, are reviewed. Finally, the remaining challenges and opportunities for the development of high efficiency metal/PCN photocatalyst systems are presented and prospected.

Morphology, Optical Properties and Photocatalytic Activity of Photo- and Plasma-Deposited Au and Au/Ag Core/Shell Nanoparticles on Titania Layers

Titania is a promising material for numerous photocatalytic reactions such as water splitting and the degradation of organic compounds (e.g., methanol, phenol). Its catalytic performance can be significantly increased by the addition of co-catalysts. In this study, Au and Au/Ag nanoparticles were deposited onto mesoporous titania thin films using photo-deposition (Au) and magnetron-sputtering (Au and Au/Ag). All samples underwent comprehensive structural characterization by grazing incidence X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Nanoparticle distributions and nanoparticle size distributions were correlated to the deposition methods. Light absorption measurements showed features related to diffuse scattering, the band gap of titania and the local surface plasmon resonance of the noble metal nanoparticles. Further, the photocatalytic activities were measured using methanol as a hole scavenger. All nanoparticle-decorated thin films showed significant performance increases in hydrogen evolution under UV illumination compared to pure titania, with an evolution rate of up to 372 μL H₂ h−1 cm−2 representing a promising approximately 12-fold increase compared to pure titania.

Solar Hydrogen Generation from Lignocellulose

Photocatalytic reforming of lignocellulosic biomass is an emerging approach to produce renewable H2 . This process combines photo-oxidation of aqueous biomass with photocatalytic hydrogen evolution at ambient temperature and pressure. Biomass conversion is less energy demanding than water splitting and generates high-purity H2 without O2 production. Direct photoreforming of raw, unprocessed biomass has the potential to provide affordable and clean energy from locally sourced materials and waste.

Bombyx mori silk/titania/gold hybrid materials for photocatalytic water splitting: combining renewable raw materials with clean fuels

The synthesis, structure, and photocatalytic water splitting performance of two new titania (TiO2)/gold(Au)/Bombyx mori silk hybrid materials are reported. All materials are monoliths with diameters of up to ca. 4.5 cm. The materials are macroscopically homogeneous and porous with surface areas between 170 and 210 m2/g. The diameter of the TiO2 nanoparticles (NPs) - mainly anatase with a minor fraction of brookite - and the Au NPs are on the order of 5 and 7-18 nm, respectively. Addition of poly(ethylene oxide) to the reaction mixture enables pore size tuning, thus providing access to different materials with different photocatalytic activities. Water splitting experiments using a sunlight simulator and a Xe lamp show that the new hybrid materials are effective water splitting catalysts and produce up to 30 mmol of hydrogen per 24 h. Overall the article demonstrates that the combination of a renewable and robust scaffold such as B. mori silk with a photoactive material provides a promising approach to new monolithic photocatalysts that can easily be recycled and show great potential for application in lightweight devices for green fuel production.

Novel hetero-bimetallic coordination polymer as a single source of highly dispersed Cu/Ni nanoparticles for efficient photocatalytic water splitting

Monodispersed Cu and Ni nanoparticles are deposited over TiO₂ using a hetero-bimetallic coordination polymer for efficient photocatalytic water splitting.

H2 production by the photocatalytic reforming of cellulose and raw biomass using Ni, Pd, Pt and Au on titania

Here, we report a method for sustainable hydrogen production using sunlight and biomass. It is shown that cellulose can be photoreformed to produce hydrogen, even in solid form, by use of metal-loaded titania photocatalysts. The experiments performed verified that the process is enabled by initial hydrolysis via glucose, which itself is shown to be efficiently converted to produce hydrogen by photocatalysis. Importantly, it is shown that not only precious metals such as Pt, Pd and Au can be used as the metal component, but also much more economic and less environmentally damaging Ni is effective. Even more importantly, we show for the first time, to the best our knowledge, that fescue grass as raw biomass can be effective for hydrogen production without significant pre-treatment. This provides additional benefits for the efficiency of biomass hydrogen production, because fewer processing steps for the raw material are required than in the production of purer forms of cellulose, for example.

M-Au/TiO2 (M = Ag, Pd, and Pt) nanophotocatalyst for overall solar water splitting: role of interfaces

M-Au/TiO2 (M = Ag, Pd, Pt) composites were prepared through a facile one-pot photodeposition synthesis and evaluated for solar water splitting (SWS) with and without a sacrificial agent. The M-Au combination exhibits a dominant role in augmenting the H2 generation activity by forming a bi-metallic system. Degussa P25 was used as a TiO2 substrate to photodeposit Au followed by Au + M (M = Ag/Pd/Pt). The SWS activity of the M-Au/TiO2 was determined through photocatalytic H2 production in the presence of methanol as a sacrificial agent under one sun conditions with an AM1.5 filter. The highest H2 yield was observed for Pt0.5-Au1/TiO2 and was around 1.3 ± 0.07 mmol h(-1) g(-1), with an apparent quantum yield (AQY) of 6.4%. Pt0.5-Au1/TiO2 also demonstrated the same activity for 25 cycles of five hours each for 125 h. Critically, the same Pt0.5-Au1/TiO2 catalyst was active in overall SWS (OSWS) without any sacrificial agent, with an AQY = 0.8%. The amount of Au and/or Pt was varied to obtain the optimum composition and it was found that the Pt0.5-Au1/TiO2 composition exhibits the best activity. Detailed characterization by physico-chemical, spectral and microscopy measurements was carried out to obtain an in-depth understanding of the origin of the photocatalytic activity of Pt0.5-Au1/TiO2. These in-depth studies show that gold interacts predominantly with oxygen vacancies present on titania surfaces, and Pt preferentially interacts with gold for an effective electron-hole pair separation at Pt-Au interfaces and electron storage in metal particles. The Pt in Pt0.5-Au1/TiO2 is electronically and catalytically different from the Pt in Pt/TiO2 and it is predicted that the former suppresses the oxygen reduction reaction.

Laser-induced forward transfer of high-viscosity silver precursor ink for non-contact printed electronics

Non-contact printing of high-viscosity silver precursor inks was achieved to provide highly conductive lines by a laser-induced forward transfer technique.

Photocatalytic hydrogen production by water/methanol decomposition using Au/TiO2 prepared by deposition-precipitation with urea

Gold nanoparticles deposited on TiO2 Degussa P25, prepared by deposition-precipitation with urea, were studied in the photocatalytic hydrogen production. The effect of parameters such as mass of catalyst, gold loading, thermal treatment, and atmosphere of treatment was evaluated and optimized. The presence of metallic gold on the titania surface showed to have contributed to the high improvement in the activity of bare TiO2 for hydrogen generation under UV light (λ=254 nm) using a lamp of low energy (2W) consumption. The optimal gold loading for the photocatalysts was 0.5 wt.%, the mass of catalyst in the reactor was 0.5 g/L in a water/methanol 1:1 vol. solution, and the thermal treatment that produced the most active gold nanoparticles was found at 300°C. The photocatalysts thermally treated under hydrogen at 300°C produced 1492 μmol g(-1)h(-1) of hydrogen; the same catalyst activated in air produced 1866 μmo lg(-1)h(-1) of hydrogen.

Investigation and enhancement of the stability and performance of water reduction systems based on cyclometalated iridium(III) complexes

Water reduction systems that use a bis-cyclometalated Ir(III) photosensitiser (PS) along with homogeneous Pd complexes as a source of in-situ-formed colloidal Pd as the water reducing complex (WRC) and triethylamine (TEA) as the sacrificial electron donor were tested and characterised with respect to their photocatalytic H(2) production performance. It was confirmed that substitution of the 2-(pyridin-2-yl)benzen-1-ide (pyb) ligand in the well-known system [Ir(pyb)(2)(bpy)](+) (bpy=2,2'-bipyridine) by the fluorinated cyclometalating ligand 5-fluoro-2-(5-methylpyridin-2-yl)benzen-1-ide (Fmpyb) tremendously enhanced the H(2) production rate. Moreover, variation of the bidentate N^N ligand bpy by alkyl substitution in the 4,4'-position resulted in an increase in the H(2) production yield by a factor of three. The incident-photon-to-hydrogen-efficiency could be enhanced from 2.6 to 12.3%. Furthermore, a new dinuclear Co complex was used as a reduction catalyst and showed up to 760 turnovers after 20 h. A detailed study of the concentration impact of all components in the photoredox system was performed. DFT calculations were used to aid the explanation of the findings.