Design of a highly nanodispersed Pd-MgO/SiO(2) composite catalyst with multifunctional activity for CH(4) reforming

Formation and Segregation of a Pd-MgO Solid Solution Studied by X-ray Absorption Spectroscopy

Thermal treatment of Pd nanoparticles or Pd(NH₃)₄(NO₃)₂ supported on MgO resulted in the formation of a solid solution of Pd-MgO, as evidenced by Pd K-edge X-ray absorption fine structure (XAFS). The valence of Pd in the Pd-MgO solid solution was determined to be 4+ from the comparison of X-ray absorption near edge structure (XANES) with reference compounds. A characteristic shrinkage of the Pd-O bond distance was observed in comparison with that of the nearest-neighboring Mg-O bond in MgO, which agreed with the density functional theory (DFT) calculations. The two-spike pattern was observed in the dispersion of Pd-MgO owing to the formation and successive segregation of solid solutions above 1073 K.

Simple mechanisms of CH4 reforming with CO2 and H2O on a supported Ni/ZrO2 catalyst

To understand the metal-support interaction of oxide supported transition metal catalysts, we computed the reaction mechanisms of dry and steam reforming of methane on a tetragonal ZrO₂(101) supported Ni catalyst. Based on the limited number of active sites on the surface, an irregular and non-ideal Ni₁₃ cluster on ZrO₂(101) is identified as a catalyst. A simple reaction mechanism is proposed, and the first direct dissociation step of CO₂, CH₄ and H₂O is the most difficult based on the computed Gibbs free energies and no surface CH_XO and CH_XOH intermediates are involved, different from that on the flat Ni(111) surface. Analysis of other supported nickel catalysts shows that not only the support but also the size and shape of the metal clusters play an important role in the reaction mechanisms and kinetics.

A review on the computational studies of the reaction mechanisms of CO2 conversion on pure and bimetals of late 3d metals

Despite series of experimental studies that reveal unique activities of late 3d transition metals and their role in microorganisms known for CO₂ conversion, these surfaces are not industrially viable yet. An insight into the elementary steps of surface catalytic processes is crucial for effective surface modification and design. The mechanisms of CO₂ transformation into CO, through the reverse water gas shift and methane reforming, are being studied. Mechanisms of CO₂ methanation is also being explored by the Sabatier reaction into methane. This review covers both experimental and theoretical studies into the mechanisms of CO₂ reduction into CO and methane, on single metals and bimetals of late 3d transition metals, i.e. Fe, Co, Ni, Cu and Zn. This paper highlights progress and gaps still existing in our knowledge of the reaction mechanisms. These mechanistic studies reveal CO₂ activation and reduction mechanisms are specific to both composition and surface facet. Surfaces with least CO₂ binding potential are seen to favour CO and O binding and provide higher barriers to dissociation. No direct correlation has been seen between binding strength of CO₂ and its degree of activation. Hydrogen-assisted dissociation is seen to be generally favoured kinetically on Cu and Ni surfaces over direct dissociation except on the Ni (211) surface. Methane production on Cu and Ni surfaces is seen to occur via the non-formate pathway. Hydrogenation reactions have focused on Cu and Ni, and more needs to be done on other surfaces, i.e. Co, Fe and Zn.

Synergistic Effects of ppm Levels of Palladium on Natural Clinochlore for Reduction of Nitroarenes

Augmenting the modified naturally occurring clay clinochlore with ppm amounts of palladium leads to a new and very effective reagent for the reduction of numerous aromatic nitro species. When palladium nanoparticles are supported on pyridyltriazole-modified clinochlore, iron within clinochlore acts synergistically with palladium to catalyze the reduction of a wide variety of nitroarenes at room temperature in aqueous media. Based on E-factor calculations, the catalyst system is found to be in line with green chemistry standards and can be recycled up to five times.

Design of Reduction Process of SnO2 by CH4 for Efficient Sn Recovery

We design a novel method for the CH4 reduction of SnO2 for the efficient recovery of Sn from SnO2 through a study combining theory and experiment. The atomic-level process of CH4-SnO2 interaction and temperature-dependent reduction behavior of SnO2 were studied with a combination of a multi-scale computational method of thermodynamic simulations and density functional theory (DFT) calculations. We found that CH4 was a highly efficient and a versatile reducing agent, as the total reducing power of CH4 originates from the carbon and hydrogen of CH4, which sequentially reduce SnO2. Moreover, as a result of the CH4 reduction of SnO2, a mixture of CO and H2 was produced as a gas-phase product (syngas). The relative molar ratio of the produced gas-phase product was controllable by the reduction temperature and the amount of supplied CH4. The laboratory-scale experimental study confirmed that CH4 actively reduces SnO2, producing 99.34% high-purity Sn and H2 and CO. Our results present a novel method for an efficient, green, and economical recycling strategy for Sn with economic value added that is held by the co-produced clean energy source (syngas).

Interface engineering for a rational design of poison-free bimetallic CO oxidation catalysts

We use density functional theory calculations of Pt@Cu core@shell nanoparticles (NPs) to design bifunctional poison-free CO oxidation catalysts. By calculating the adsorption chemistry under CO oxidation conditions, we find that the Pt@Cu NPs will be active for CO oxidation with resistance to CO-poisoning. The CO oxidation pathway at the Pt-Cu interface is determined on the Pt NP covered with a full- and partial-shell of Cu. The exposed portion of the Pt core preferentially binds CO and the Cu shell binds O₂, supplying oxygen for the reaction. The Pt-Cu interface provides CO-oxidation sites that are not poisoned by either CO or O₂. Additional computational screening shows that this separation of reactant binding sites is possible for several other core@shell NPs. Our results indicate that the metal-metal interface within a single NP can be optimized for design of bifunctional catalytic systems with improved performance.

Progress in Synthesis of Highly Active and Stable Nickel-Based Catalysts for Carbon Dioxide Reforming of Methane

In recent decades, rising anthropogenic greenhouse gas emissions (mainly CO2 and CH4 ) have increased alarm due to escalating effects of global warming. The dry carbon dioxide reforming of methane (DRM) reaction is a sustainable way to utilize these notorious greenhouse gases. This paper presents a review of recent progress in the development of nickel-based catalysts for the DRM reaction. The enviable low cost and wide availability of nickel compared with noble metals is the main reason for persistent research efforts in optimizing the synthesis of nickel-based catalysts. Important catalyst features for the rational design of a coke-resistant nickel-based nanocatalyst for the DRM reaction are also discussed. In addition, several innovative developments based on salient features for the stabilization of nickel nanocatalysts through various means (which include functionalization with precursors, synthesis by plasma treatment, stabilization/confinement on mesoporous/microporous/carbon supports, and the formation of metal oxides) are highlighted. The final part of this review covers major issues and proposed improvement strategies pertaining to the rational design of nickel-based catalysts with high activity and stability for the DRM reaction.

Biogas dry reforming for syngas production: catalytic performance of nickel supported on waste-derived SiO2

Waste-derived SiO₂ was used as catalyst support in the biogas dry reforming process, which showed a high catalytic activity and good stability.

Design of modular catalysts derived from NiMgAl-LDH@m-SiO2 with dual confinement effects for dry reforming of methane

The modular catalysts were fabricated via the combination of the Ni-MgO-Al2O3 mixed oxide nanoplates and the mesoporous SiO2 coating. Due to the dual confinements, the catalysts show high catalytic activity with enhanced coke- and sintering-resistance in the dry reforming of methane reaction.

Facile synthesis of hollow hierarchical Ni/γ-Al2O3 nanocomposites for methane dry reforming catalysis

Hierarchical Ni/Al₂O₃ nanocomposite possesses a high surface area, high loading of well dispersed metal nanoparticles, and a hierarchical hollow structure. The strong interaction between metal and support and the large open accessible surface lead to excellent sintering and carbon resistance, and superior catalytic performance in methane dry reforming.