Catalytic oxidative decarboxylation of malic acid into dimethyl malonate in methanol with dioxygen

Modifications of Furan-Based Polyesters with the Use of Rigid Diols

The replacement of polymers derived from petrochemical resources has been a prominent area of focus in recent decades. Polymers used in engineering materials must exhibit mechanical strength and stiffness while maintaining performance through a broad temperature range. Most of the polyesters used as engineering materials are based on terephthalic acid (TPA) and its derivatives, which provide necessary rigidity to molecular chains due to an aromatic ring. Bio-based alternatives for TPA-based polyesters that are gaining popularity are the polyesters derived from 2,5-furandicarboxylic acid (FDCA). To broaden applicational possibilities, one effective way to achieve specific properties in targeted applications is to adjust the composition and structure of polymers using advanced polymer chemistry techniques. The incorporation of rigid diols such as isosorbide, 1,4-cyclohexanedimethanol (CHDM), and 2,2,4,4-tetramethyl-1,3-cyclobutanediol (CBDO) should result in a greater stiffness of the molecular chains. This review extensively explores the effect of incorporating rigid diols on material properties through a review of research articles as well as patents. Moreover, this review mainly focuses on the polyesters and copolyesters synthesized via two-step melt polycondensation and its alterations due to the industrial importance of this method. Innovative synthesis strategies and the resulting material properties are presented.

Catalytic conversion of cellulosic biomass to harvest high-valued organic acids

Catalytic conversion of biomass provides an alternative way for the production of organic acids from renewable feedstocks. The emerging process contains complex reactions and strategies to cut down those complex biogenic materials into target molecules. Here, we review the catalytic conversion of cellulosic biomass toward high-valued organic acids. This work has summarized the key controlling reactions which lead toward formic acid, glycolic acid, or sugar acids in oxidative conditions and the main pathways for lactic acid or levulinic acid in the anaerobic environment from cellulosic biomass and its derivatives. We evaluate and compare different strategies and methods such as one-pot and two-step conversion. Additionally, the optimization of catalytic reactions has been discussed to realize the design of C-C coupling reactions, the development of multifunctional materials, and new efficient system. In all, this article gives an insight guide to precisely convert cellulosic biomass into target organic acids.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

Kinetic fall-off behavior for the Cl + Furan-2,5-dione (C4H2O3, maleic anhydride) reaction

Rate coefficients, k, for the gas-phase Cl + Furan-2,5-dione (C4H2O3, maleic anhydride) reaction were measured over the 15-500 torr (He and N2 bath gas) pressure range at temperatures between 283 and 323 K. Kinetic measurements were performed using pulsed laser photolysis (PLP) to produce Cl atoms and atomic resonance fluorescence (RF) to monitor the Cl atom temporal profile. Complementary relative rate (RR) measurements were performed at 296 K and 620 torr pressure (syn. air) and found to be in good agreement with the absolute measurements. A Troe-type fall-off fit of the temperature and pressure dependence yielded the following rate coefficient parameters: ko(T) = (9.4 ± 0.5) × 10-29 (T/298)-6.3 cm6 molecule-2 s-1, k∞(T) = (3.4 ± 0.5) × 10-11 (T/298)-1.4 cm3 molecule-1 s-1. The formation of a Cl·C4H2O3 adduct intermediate was deduced from the Cl atom temporal profiles and an equilibrium constant, KP(T), for the Cl + C4H2O3 ↔ Cl·C4H2O3 reaction was determined. A third-law analysis yielded ΔH = -15.7 ± 0.4 kcal mol-1 with ΔS = -25.1 cal K-1 mol-1, where ΔS was derived from theoretical calculations at the B3LYP/6-311G(2d,p,d) level. In addition, the rate coefficient for the Cl·C4H2O3 + O2 reaction at 296 K was measured to be (2.83 ± 0.16) × 10-12 cm3 molecule-1 s-1, where the quoted uncertainty is the 2σ fit precision. Stable end-product molar yields of (83 ± 7), (188 ± 10), and (65 ± 10)% were measured for CO, CO2, and HC(O)Cl, respectively, in an air bath gas. An atmospheric degradation mechanism for C4H2O3 is proposed based on the observed product yields and theoretical calculations of ring-opening pathways and activation barrier energies at the CBS-QB3 level of theory.

Catalytic Transformation of Cellulose and Its Derivatives into Functionalized Organic Acids

Cellulose is a promising renewable and abundant resource for the production of high-value chemicals, in particular, organic oxygenates, because of its high oxygen/carbon ratio. The sustainable production of hydroxycarboxylic acids and dicarboxylic acids, such as gluconic/glucaric acid, lactic acid, 2,5-furandicarboxylic acid, adipic acid, and terephthalic acid, most of which are monomers of key polymers, have attracted much attention in recent years. The synthesis of these organic acids from cellulose generally involves several tandem reaction steps, and thus, multifunctional catalysts that can catalyze the selective activation of specific C-O or C-C bonds hold the key. This review highlights recent advances in the development of efficient catalytic systems and new strategies for the selective conversion of cellulose or its derived carbohydrates into functionalized organic acids. The reaction mechanism is discussed to offer deep insights into the regioselective cleavage of C-O or C-C bonds.

Production of Plant Phthalate and its Hydrogenated Derivative from Bio-Based Platform Chemicals

Direct transformation of bio-based platform chemicals into aromatic dicarboxylic acids and their derivatives, which are widely used for the manufacture of polymers, is of significant importance for the sustainable development of the plastics industry. However, limited successful chemical processes have been reported. This study concerns a sustainable route for the production of phthalate and its hydrogenated derivative from bio-based malic acid and erythritol. The key Diels-Alder reaction is applied to build a substituted cyclohexene structure. The dehydration reaction of malic acid affords fumaric acid with 96.6 % yield, which could be used as the dienophile, and 1,3-butadiene generated in situ through erythritol deoxydehydration serves as the diene. Starting from erythritol and dibutyl fumarate, a 74.3 % yield of dibutyl trans-4-cyclohexene-1,2-dicarboxylate is obtained. The palladium-catalyzed dehydrogenation of the cycloadduct gives a 77.8 % yield of dibutyl phthalate. Dibutyl trans-cyclohexane-1,2-dicarboxylate could be formed in nearly 100 % yield under mild conditions by hydrogenation of the cycloadduct. Furthermore, fumaric acid and fumarate, with trans configurations, were found to be better dienophiles for this Diels-Alder reaction than maleic acid and maleate, with cis configuration, based on the experimental and computational results. This new route will pave the way for the production of environmental friendly plastic materials from plants.

Transformation of cellulose and its derived carbohydrates into formic and lactic acids catalyzed by vanadyl cations

The transformation of cellulose or cellulose-derived carbohydrates into platform chemicals is the key to establish biomass-based sustainable chemical processes. The systems able to catalyze the conversion of cellulose into key chemicals in water without the consumption of hydrogen are limited. We report that simple vanadyl (VO(2+)) cations catalyze the conversions of cellulose and its monomer, glucose, into lactic acid and formic acid in water. We have discovered an interesting shift of the major product from formic acid to lactic acid on switching the reaction atmosphere from oxygen to nitrogen. Our studies suggest that VO(2+) catalyzes the isomerization of glucose to fructose, the retro-aldol fragmentation of fructose to two trioses, and the isomerization of trioses, which leads to the formation of lactic acid under anaerobic conditions. The oxidative cleavage of C-C bonds in the intermediates caused by the redox conversion of VO2(+)/VO(2+) under aerobic conditions results in formic acid and CO2. We demonstrate that the addition of an alcohol suppresses the formation of CO2 and enhances the formic acid yield significantly to 70-75 %.

Conversion of levulinate into succinate through catalytic oxidative carbon-carbon bond cleavage with dioxygen

Grand Cleft Oxo: Levulinate, available from biomass, is oxidized into succinate through manganese(III)-catalyzed selective cleavage of CC bonds with molecular oxygen. In addition to levulinate, a wide range of aliphatic methyl ketones also undergo oxidative CC bond cleavage at the carbonyl group. This procedure offers a route to valuable dicarboxylic acids from biomass resources by nonfermentive approaches.