Formaldehyde: catalytic oxidation as a promising soft way of elimination

Density functional theory-based screening of Ti4C3O2-loaded single atoms for efficient selective catalytic oxidation of formaldehyde

Indoor formaldehyde (HCHO) pollution poses a major risk to human health. Low-temperature catalytic oxidation is an effective method for HCHO removal. The high activity and selectivity of single atomic catalysts provide a possibility for the development of efficient non-precious metal catalysts. In this study, the most stable single-atom catalyst Ti-Ti4C3O2 was screened by density functional theory among many single atomic catalysts with two-dimensional (2D) monolayer Ti4C3O2 as the support. The computational results show that Ti-Ti4C3O2 is highly selective to HCHO and O2 in complex environments. The HCHO oxidation reaction pathways are proposed based on the Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) mechanisms. According to the reaction energy and energy span models, the E-R mechanism has a lower maximum energy barrier and higher catalytic efficiency than the L-H mechanism. In addition, the stability of the Ti-Ti4C3O2 structure and active center was verified by diffusion energy barrier and ab initio molecular dynamics simulations. The above results indicate that Ti-Ti4C3O2 is a promising non-precious metal catalyst. The present study provides detailed theoretical insights into the catalytic oxidation of HCHO by Ti-Ti4C3O2, as well as an idea for the development of efficient non-precious metal catalysts based on 2D materials.

Ruthenium(II)-Catalyzed Hydrogenation and Tandem (De)Hydrogenation via Metal-Ligand Cooperation: Base- and Solvent-Assisted Switchable Selectivity

A versatile, selective, solvent (methanol vs ethanol)- and base (potassium vs lithium carbonate)-assisted switchable synthesis of saturated ketone and α-methyl saturated ketone from α,β-unsaturated ketone is developed. Mechanistic aspects, evaluated from spectroscopic studies, in situ monitoring of the reaction progress, control studies, and labeling studies, further indicate the involvement of a tandem dehydrogenation-condensation-hydrogenation sequence in the reaction, in which the interconvertible coordination mode (imino N → Ru and amido N-Ru) of coordinated imidazole with Ru(II)-para-cymene is crucial, without which the efficiency and selectivity of the catalyst are completely lost. The catalyst demonstrates good efficiency, selectivity, and functional group tolerance and displays a broad scope (69 examples) for monomethylation and hydrogenation of unsaturated chalcones, double methylation of ketones, and N-methylation of amines.

Converting formaldehyde in methanol with MoO2 under irradiation: A pollution-free strategy for cleaning air

Direct photocatalytic reduction of toxic formaldehyde (HCHO) in value-added chemicals and fuels is promising because that not only abates the environmental pollution, but also solves the energy shortage. Herein, self-supported MoO2 and MoO3 nanoparticles growing on Mo meshes were comparatively applied to the photocatalytic conversion of HCHO. Under UV-visble lights, MoO2 reduces HCHO in methanol (CH3OH) while MoO3 oxidizes HCHO in carbon oxide and water. Their contrary photocatalytic capacities were revealed. Compared with MoO3, the lower work function of MoO2 enables an electron-rich interface, realizing a complete reduction of 30 ppm HCHO to CH3OH in 30 min. Theoretical calculations clarify that a large number of delocalized electrons on MoO2 attracts HCHO molecule and activates its CO bond, facilitating subsequent hydrogenation and reduction of HCHO to CH3OH. As for MoO3, the wider bandgap and higher potential of valence band govern the photocatalytic oxidation of HCHO.

Doping of porous carbons with sulfur and nitrogen markedly enhances their surface activity for formaldehyde removal

The surfaces of phosphoric acid activated carbon, referred to as CG, and steam activated one, referred to as SX, were modified through an introduction of S- and N- groups originated from thiourea. The prepared samples were used for formaldehyde removal at room temperature. Heating at 450, 600 and 950 °C altered both surface chemistry and porosity. The extents of these modifications depended on the type of carbon. Using thiourea as the modifier resulted in an incorporation of significant amounts of nitrogen and sulfur to the carbon matrices. Their speciation depended on the heat treatment conditions. The activity of samples heated at 450 °C was governed by amine groups of thiourea retained on the surface. A further heat treatment converted gradually amine nitrogen into pyridines/pyrroles and quaternary nitrogen, shifting the adsorption mechanism to rather specific interactions than a direct chemical reactivity. Carbons with few times less nitrogen than in their amine-modified counterparts, but in quaternary form and with the small amount of sulfur in thiophenic configurations, regardless the origin, worked as very efficient adsorbents of HCHO. Due to the modification of the carbon matrix electronic structure, resulting in a positive charge on carbon atoms in the vicinity of the heteroatoms incorporated to carbon rings, the density of specific adsorption centers on the surface in larger pores was significantly higher than that in ultramicropores. This markedly contributed to efficient utilization of pores/surface, where heteroatom can exist and where otherwise the dispersive adsorptions forces would be weak, for HCHO removal at ambient conditions.

Awareness raising and dealing with methanol poisoning based on effective strategies

Intoxication with methanol most commonly occurs as a consequence of ingesting, inhaling, or coming into contact with formulations that include methanol as a base. Clinical manifestations of methanol poisoning include suppression of the central nervous system, gastrointestinal symptoms, and decompensated metabolic acidosis, which is associated with impaired vision and either early or late blindness within 0.5-4 h after ingestion. After ingestion, methanol concentrations in the blood that are greater than 50 mg/dl should raise some concern. Ingested methanol is typically digested by alcohol dehydrogenase (ADH), and it is subsequently redistributed to the body's water to attain a volume distribution that is about equivalent to 0.77 L/kg. Moreover, it is removed from the body as its natural, unchanged parent molecules. Due to the fact that methanol poisoning is relatively uncommon but frequently involves a large number of victims at the same time, this type of incident occupies a special position in the field of clinical toxicology. The beginning of the COVID-19 pandemic has resulted in an increase in erroneous assumptions regarding the preventative capability of methanol in comparison to viral infection. More than 1000 Iranians fell ill, and more than 300 of them passed away in March of this year after they consumed methanol in the expectation that it would protect them from a new coronavirus. The Atlanta epidemic, which involved 323 individuals and resulted in the deaths of 41, is one example of mass poisoning. Another example is the Kristiansand outbreak, which involved 70 people and resulted in the deaths of three. In 2003, the AAPCC received reports of more than one thousand pediatric exposures. Since methanol poisoning is associated with high mortality rates, it is vital that the condition be addressed seriously and managed as quickly as feasible. The objective of this review was to raise awareness about the mechanism and metabolism of methanol toxicity, the introduction of therapeutic interventions such as gastrointestinal decontamination and methanol metabolism inhibition, the correction of metabolic disturbances, and the establishment of novel diagnostic/screening nanoparticle-based strategies for methanol poisoning such as the discovery of ADH inhibitors as well as the detection of the adulteration of alcoholic drinks by nanoparticles in order to prevent methanol poisoning. In conclusion, increasing warnings and knowledge about clinical manifestations, medical interventions, and novel strategies for methanol poisoning probably results in a decrease in the death load.

Formaldehyde Reduction in an Operating Room Setting: Comparison of a Catalytic Surgical Vacuum Device With a Traditional Smoke Evacuator

Introduction Electrosurgery exposes healthcare workers to volatile organic compounds (VOCs) including formaldehyde. Adopting electrosurgical devices that catalytically transform formaldehyde to benign substances has the potential to improve safety in surgical settings. Materials and methods We compared the efficiency of formaldehyde removal of two medical devices. The first was a novel surgical vacuum (SV) device containing ultra-low particulate air (ULPA) filtration, activated carbon and catalytic transition metal oxide. The second was a commonly utilized handpiece evacuator (HE) that contained only mechanical filtration and activated carbon granules. Both devices were exposed to formalin vapor. Results The time weighted average (TWA), median and peak concentrations of detected formaldehyde at the outflow of the SV unit were 90% lower than the corresponding values detected at the outflow of the HE device (p = 0.0034). When catalytic material was added to the HE device, the detected formaldehyde concentration at the outflow was reduced by 55% (p = 2.9 x 10^-15). Conclusions The catalytic SV device has the potential to considerably reduce formaldehyde levels in operating room (OR) environments.

Formaldehyde oxidation on Pd/USY catalysts at room temperature: The effect of acid pretreatment on supports

The complete catalytic oxidation of formaldehyde (HCHO) to CO₂ and H₂O at room temperature is a green route for indoor HCHO removal. Zeolite is an excellent carrier material for HCHO oxidation due to its large surface area, intricate pores and high adsorption capacity. However, the zeolite-supported noble metal catalysts have currently shown relatively low activity especially at room temperature. In this work, we present a facile acid treatment strategy for zeolite catalysts to improve the hydroxyl concentration and further enhance their catalytic activity for HCHO oxidation. Activity tests illustrated that HCHO could be completely oxidized to CO₂ and H₂O at a nearly 100% conversion rate with a weight hourly space velocity (WHSV) of 150,000 mL/(g∙hr) at 25°C, when the support of Pd/USY catalysts was pretreated by hydrochloric acid with a concentration of 0.20 mol/L. The characterization results revealed that the active hydroxyl groups originated from the dealumination in the acid treatment play a key role in the HCHO oxidation reaction. The deduced reaction mechanism suggests that bridging hydroxyl groups may oxidize HCHO to dioxymethylene (DOM) species and terminal hydroxyl groups are responsible for the transformation of DOM groups to formate (HCOO) species.

Assembled Organoruthenium(II) for Formaldehyde Decomposition and Hydrogen Production

Formaldehyde decomposition is not only an attractive method for hydrogen production, but also a potential approach for gaseous formaldehyde removal. In this research, we prepare some assembled organoruthenium through coordination reaction between Ru(p-Cymene)Cl₂ and bridge-linking ligands. It is a creative approach for Ru(p-Cymene)Cl₂ conversion into heterogeneous particles. The rigidity of bridge-linking ligand enables assembled organoruthenium to have highly ordered crystalline structure, even show clear crystal lattice with spacing of 0.19 nm. XPS shows the N-Ru bond are formed between bridge-linking ligand and Ru(p-Cymene)Cl₂ . The assembled organoruthenium has high abundant active sites for formaldehyde decomposition at low temperature. The reaction rate could increase linearly with temperature and formaldehyde concentration, with a TOF of 2420 h^-1 at 90 °C. It is promising for gaseous formaldehyde decomposition in wet air or nitrogen. Formaldehyde conversion is up to 95 % over Ru-DAPM is 4,4'-diaminodiphenylmethane at 90 °C in air. Gaseous formaldehyde decomposition is a two-steps process under oxygen-free condition. Firstly, formaldehyde dissolve in water, and be converted into hydrogen and formic acid through formaldehyde-water shift reaction. Then intermediate formic acid will further decompose into hydrogen and carbon dioxide. We also find formaldehyde decomposition is a synergetic catalysis process of oxygen and water in moist air. Oxygen is conducive to formic acid desorption and decomposition on the active sites, so assembled organoruthenium exhibit slightly higher conversion for formaldehyde decomposition in moist air. This work proposes a distinctive method for gaseous formaldehyde decomposition in the air, which is entirely different from formaldehyde photocatalysis or thermocatalysis oxidation.

Highly Active Amino-Fullerene Derivative-Modified TiO2 for Enhancing Formaldehyde Degradation Efficiency under Solar-Light Irradiation

Formaldehyde (HCHO) is a ubiquitous indoor pollutant that seriously endangers human health. The removal of formaldehyde effectively at room temperature has always been a challenging problem. Here, a kind of amino-fullerene derivative (C60-EDA)-modified titanium dioxide (C60-EDA/TiO2) was prepared by one-step hydrothermal method, which could degrade the formaldehyde under solar light irradiation at room temperature with high efficiency and stability. Importantly, the introduction of C60-EDA not only increases the adsorption of the free formaldehyde molecules but also improves the utilization of sunlight and suppresses photoelectron-hole recombination. The experimental results indicated that the C60-EDA/TiO2 nanoparticles exhibit much higher formaldehyde removal efficiency than carboxyl-fullerene-modified TiO2, pristine TiO2 nanoparticles, and almost all other reported formaldehyde catalysts especially in the aspect of the quality of formaldehyde that is treated by catalyst with unit mass (mHCHO/mcatalyst = 40.85 mg/g), and the removal efficiency has kept more than 96% after 12 cycles. Finally, a potential formaldehyde degradation pathway was deduced based on the situ diffuse reflectance infrared Fourier transform spectrometry (DRIFTS) and reaction intermediates. This work provides some indications into the design and fabrication of the catalysts with excellent catalytic performances for HCHO removal at room temperature.

Out of Thin Air? Catalytic Oxidation of Trace Aqueous Aldehydes with Ambient Dissolved Oxygen

Water reuse is expanding due to increased water scarcity. Water reuse facilities treat wastewater effluent to a very high purity level, typically resulting in a product water that is essentially deionized water, often containing less than 100 μg/L organic carbon. However, recent research has found that low-molecular-weight aldehydes, which are toxic electrophiles, comprise a significant fraction of the final organic carbon pool in recycled wastewater in certain treatment configurations. In this manuscript, we demonstrate oxidation of trace aqueous aldehydes to their corresponding acids using a heterogeneous catalyst (5% Pt on C), with ambient dissolved oxygen serving as the terminal electron acceptor. Mass balances are essentially quantitative across a range of aldehydes, and pseudo-first-order reaction kinetics are observed in batch reactors, with k_obs varying from 0.6 h^-1 for acetaldehyde to 4.6 h^-1 for hexanal, while they are low for unsaturated aldehydes. Through kinetic and isotopic labeling experiments, we demonstrate that while oxygen is essential for the reaction to proceed, it is not involved in the rate-limiting step, and the reaction appears to proceed primarily through a base-promoted β-hydride elimination mechanism from the hydrated gem-diol form of the corresponding aldehyde. This is the first report we are aware of that demonstrates useful abiotic oxidation of a trace organic contaminant using dissolved oxygen.

Coupling of photocatalysis and catalysis using an optical fiber textile for room temperature depollution

Herein, we investigate the interplay between a photocatalyst (TiO₂) and a catalyst (Pt/TiO₂ and Pt/CeO₂) for the oxidation of formaldehyde and toluene at room temperature. A luminous textile is used as support and as light source for the photocatalyst. Our results indicate that the presence of the catalyst and the photocatalyst increases the catalytic performance for the oxidation of formaldehyde, while the photocatalytic performance for toluene oxidation decreases. The overall performance (toluene and formaldehyde degradation) of the system can be optimized with respect to the choice of support for the catalyst (e.g. TiO₂ or CeO₂), the quantity of Pt used, and the ratio between the catalyst and photocatalyst. In addition, different configurations of the photocatalyst and the catalyst on the textile are studied: under leaching and flow-through gas streams, catalyst and photocatalyst deposition on the same and opposite site of the textile are tested. The performance of the system can be optimized by adapting a configuration where the gas stream goes through the textile, while the deposition side of the catalyst and/or photocatalyst with respect to the gas stream is of minor importance.

A Brief Review of Formaldehyde Removal through Activated Carbon Adsorption

Formaldehyde is a highly toxic indoor pollutant that can adversely impact human health. Various technologies have been intensively evaluated to remove formaldehyde from an indoor atmospheres. Activated carbon (AC) has been used to adsorb formaldehyde from the indoor atmosphere, which has been commercially viable owing to its low operational costs. AC has a high adsorption affinity due to its high surface area. In addition, applications of AC may be diversified by the surface modification. Among the different surface modifications for AC, amination treatments of AC have been reported and evaluated. Specifically, the amine functional groups of the amine-treated AC have been found to play an important role in the adsorption of formaldehyde. Surface modifications of AC by impregnating and/or grafting the amine functional groups onto the AC surface have been reported in the literature. The impregnation of the amine-containing species on AC is mainly achieved by physical interaction or H-bond of the amines to the AC surface. Meanwhile, the grafting of the amine functional groups is mainly conducted through chemical reactions occurring between the amines and the AC surface. Herein, the carboxyl group, as a representative functional group for grafting on the surface of AC, plays a key role in the amination reactions. A qualitative comparison of amination chemicals for the surface modification of AC has also been discussed. Thermodynamics and kinetics for adsorption of formaldehyde on AC are firstly reviewed in this paper, and then the major factors affecting the adsorptive removal of formaldehyde over AC are highlighted and discussed in terms of humidity and temperature. In addition, new strategies for amination, as well as the physical modification option for AC application, are proposed and discussed in terms of safety and processability.

Noble Metal Single-Atom Catalysts for the Catalytic Oxidation of Volatile Organic Compounds

Volatile organic compounds (VOCs) are detrimental to the environment and human health and must be eliminated before discharging. Oxidation by heterogeneous catalysts is one of the most promising approaches for the VOCs abatement. Precious metal catalysts are highly active for the catalytic oxidation of VOCs, but they are rare and their high price limits large-scale application. Supported metal single-atom catalysts (SACs) have a high atom efficiency and provide the possibility to circumvent such limitations. This Review summarizes recent advances in the use of metal SACs for the complete oxidation of VOCs, such as benzene, toluene, formaldehyde, and methanol, as well as aliphatic and Cl- and S-containing hydrocarbons. The structures of the metal SACs used and the reaction mechanisms of the VOC oxidation are discussed. The most widely used SACs are noble metals supported on oxides, especially on reducible oxides, such as Mn₂ O₃ and TiO₂ . The reactivity of most SACs is related to the activity of surface lattice oxygen of the oxides. Furthermore, several metal SACs show better reactivity and improved S and Cl resistance than the corresponding nanocatalysts, indicating that SACs have potential for application in the oxidation of VOCs. The deactivation and regeneration mechanisms of the metal SACs are also summarized. It is concluded that the application of metal SACs in catalytic oxidation of VOCs is still in its infancy. This Review aims to elucidate structure-performance relationships and to guide the design of highly efficient metal SACs for the catalytic oxidation of VOCs.

The influence of doping amount on the catalytic oxidation of formaldehyde by Mn-CeO2 mixed oxide catalyst: A combination of DFT and microkinetic study

Formaldehyde (HCHO) is a major environmental pollutant. The Mn-doped CeO₂ catalyst has good catalytic performance for the oxidation of HCHO. The catalytic activity can be effectively tuned by changing the amount of metal doping. In this paper, density functional theory combined with micro-kinetic analysis are employed to provide a molecular level understanding to such effects. The CeO₂(111) surface with different Mn doping content was used to study the oxidation mechanism of HCHO. Highly dispersed Mn doped ceria was dominant at low content of Mn. While with the increase of Mn doping, Mn begins to accumulate on the CeO₂(111) surface. It is not conducive to the breaking of C-H bonds, the generation of oxygen vacancies and the adsorption of active oxygen species. Therefore, the low-content Mn-doped CeO₂ catalyst has higher catalytic oxidation activity of HCHO. The present contribution is useful for further optimization of Mn-CeO₂ catalysts towards HCHO oxidation.

Low-Temperature Oxidation Removal of Formaldehyde Catalyzed by Mn-Containing Mixed-Oxide-Supported Bismuth Oxychloride in Air

The Mn-containing mixed-oxide-supported bismuth oxychloride (BiOCl) catalysts were prepared by calcining their corresponding parent hydrotalcite supported BiOCl. The crystal structure of BiOCl was found to be intact during calcination, while significant differences appeared in the chemical state of Mn and the redox capacities of the catalysts before and after calcination. Compared to the hydrotalcite-supported catalysts, the mixed-oxide-supported BiOCl showed much higher catalytic performance in the oxidation removal of formaldehyde due to the synergetic catalysis of more surface oxygen vacancies and higher surface basicity. The complete removal of formaldehyde could be achieved at 70 °C, and the removal efficiency was maintained more than 90% for 21 h. A possible reaction mechanism was also proposed.

Acid pretreatment of support promotes Pd/SiO2 activity for formaldehyde oxidation at room temperature

Hydroxyl groups on SiO2 produced by acid pretreatment favored the anchoring of Pd particles and increased their dispersion, which induced more oxygen vacancies on the surface of catalysts and further enhanced H2O activation.

Water-induced gaseous formaldehyde decomposition using ruthenium organic crystalline particles

Novel ruthenium organic crystalline particles are prepared for providing two distinctive approaches for formaldehyde decomposition: catalytic oxidation or water-induced formaldehyde decomposition.

Introducing Polyhydroxyurethane Hydrogels and Coatings for Formaldehyde Capture

Formaldehyde (FA) is a harmful chemical product largely used for producing resins found in our living spaces. Residual FA that leaches out the resin contributes to our indoor air pollution and causes some important health issues. Systems able to capture this volatile organic compound are highly desirable; however, traditional adsorbents are most often restricted to air filtration systems. Herein, we report novel waterborne coatings that are acting as a FA sponge for indoor air decontamination. These coatings, of the poly(hydroxyurethane) (PHU) type, rich in primary amine groups, are prepared by the polyaddition of a hydrosoluble dicyclic carbonate to a polyamine in water at room temperature under catalyst-free conditions. We highlight the importance of the choice of the polyamine on the curing rate of the formulation and on the FA capture ability of PHU. The excellent FA capturing ability of the best candidate is rationalized by investigating the action mode of the polyamine used to construct PHUs. With poly(vinyl amine), FA is covalently and permanently bound to PHU, with no release over time. The performance of the coating in FA abatement is impressive, with more than 90% of captured FA after one day of contact. The facility to prepare these transparent and colorless coatings from waterborne formulations gives access to new efficient indoor air depolluting solutions, potentially applicable to various surfaces of our living spaces (wall, ceiling, etc.).

Treatment of highly concentrated formaldehyde effluent using adsorption and ultrasonic dissociation on mesoporous copper iodide (CuI) nano-powder

Herein we report a successful degradation of highly concentrated formaldehyde (HCHO, 900 ppm <) effluent from a petrochemical industry using sono-catalytic reaction on highly porous (BET surface of 128 m² g^-1) copper iodide (CuI) nanocrystals as the adsorbent. In this regard, the designed experiments for optimization indicated that the ultrasonic wave (40 kHz) and mass of adsorbent (30 g/L) were significant in HCHO removal so that the combination of the adsorption under ultrasonic degradation resulted in approaching the eliminating efficiency of more than 99%. In this way, GC-MS analysis confirmed the CO₂ production during HCHO degradation. Although the physisorption mechanism (-15.56 kJ/mol) limited the HCHO concentration (~100 ppm) for removal, addition of ultrasonic irradiation significantly improved the process to eliminate 986 ppm of HCHO from the real petrochemical effluent. Moreover, the mechanisms of HCHO decomposition were scrutinized through theoretical studies (density functional theory (DFT)), as well as thermodynamic and kinetics theories. Correspondingly, as calculated from the DFT, the highest adsorption on cleavage plane (111) of the adsorbent was shown to be in complete agreement with its XRD analysis in which the main peak corresponds to the lattice plane (111).

Photothermal synergic catalytic degradation of the gaseous organic pollutant isopropanol in oxygen vacancies utilizing ZnFe2O4

ZnFe2O4 is an environmentally friendly semiconductor material which has potential applications in catalytic organic pollutant degradation. Here, we demonstrate the synthesis of ZnFe2O4 and its photothermal catalytic application. The obtained ZnFe2O4 prepared by using the sol-gel method has a large specific surface area which reaches 56.4 m2/g. Electron paramagnetic resonance, X-ray photoelectron spectra, and photoabsorption results indicate that ZnFe2O4 has plentiful oxygen vacancies. When evaluated by the degradation of the gaseous organic pollutant isopropanol, oxygen-vacancy-rich ZnFe2O4 presents a high and stable thermal catalytic performance, while driven by high-intensity light. In addition, a distinct improvement is observed. Moreover, a synergic photothermal catalytic mechanism of isopropanol degradation on ZnFe2O4 is proposed.

A review of confined-structure catalysts in the catalytic oxidation of VOCs: synthesis, characterization, and applications

This picture depicts the process of the catalytic oxidation of VOCs on confined-structure catalysts, which possess excellent activity and can effectively protect the active phase from aggregation and poisoning.

Highly efficient Ru/CeO2 catalysts for formaldehyde oxidation at low temperature and the mechanistic study

Ru species have a high redox capacity on a CeO₂ support, and the metallic Ru species could be easily oxidized back to RuO_x species.

Hierarchical nanostructures self-assembled from δ-MnO2 ultrathin nanosheets and Mn3O4 octahedrons for efficient room-temperature HCHO oxidation

Self-assembling ultrathin active δ-MnO₂ nanosheets and Mn₃O₄ octahedrons into hierarchical texture enhances room-temperature formaldehyde oxidation at a low-level of Pt.

Nickel oxide regulating surface oxygen to promote formaldehyde oxidation on manganese oxide catalysts

The surface oxygen of MnOx is effectively regulated by NiO addition, and the amount and reactivity of surface oxygen contributed to the activity of the NiO–MnOx catalyst, while surface oxygen mobility contributed to reaction stability.

Formaldehyde Total Oxidation on Manganese-Doped Hydroxyapatite: The Effect of Mn Content

An aqueous impregnation method using manganese (II) nitrate precursor, followed by calcination at 400 °C, was carried out for the preparation of manganese doped hydroxyapatite catalysts (MnxHap; x = Mn wt.%: 2.5, 5.0, 10, 20, and 30 based on MnO2). Methods of characterization including inductively coupled plasma spectroscopy (ICP), N2 physisorption, X-ray Diffraction (XRD), Fourier-Transform Transmission Infrared (FT-IR), Raman, and Thermal gravimetric analysis (TGA/MS) analysis were used for the identification of Mn species and its surrounding environment. Raman spectroscopy indicated the presence of the ε-MnO2 phase for Mn20Hap and Mn30Hap in agreement with the XRD results and the presence of β-MnOOH species for Mn5Hap and Mn10Hap. The formaldehyde total oxidation was investigated on these catalysts and it was shown that Mn5Hap was the most active catalyst, achieving a normalized rate of formaldehyde (HCHO) conversion into CO2 per mole of Mn of 0.042 h−1 at a temperature of 145 °C. The well dispersed oxidized manganese species on Hap with a medium Mn AOS (average oxidation state) were mainly responsible for this performance. Since HCHO was retained on the surface of all catalysts during the catalytic test, the combined Diffuse Reflectance Infrared Fourier Transform spectroscopy (DRIFT) experiment at room temperature and thermodesorption (TD)-FTIR identified formate species as their oxidation consumed surface OH groups. A stability test and moisture effect study showed that the presence of water vapor has a beneficial effect on the performances of the catalyst.

CuAlCe Oxides Issued from Layered Double Hydroxide Precursors for Ethanol and Toluene Total Oxidation

CuAlCe oxides were obtained from hydrotalcite-type precursors by coprecipitation using a M2+/M3+ ratio of 3. The collapse of the layered double hydroxide structure following the thermal treatment leads to the formation of mixed oxides (CuO and CeO2). The catalytic performance of the copper-based catalysts was evaluated in the total oxidation of two Volatile Organic Compounds (VOCs): ethanol and toluene. XRD, SEM Energy-Dispersive X-ray Spectrometry (EDX), H2-temperature programmed reduction (TPR) and XPS were used to characterize the physicochemical properties of the catalysts. A beneficial effect of combining cerium with CuAl-O oxides in terms of redox properties and the abatement of the mentioned VOCs was demonstrated. The sample with the highest content of Ce showed the best catalytic properties, which were mainly related to the improvement of the reducibility of the copper species and their good dispersion on the surface. The presence of a synergetic effect between the copper and cerium elements was also highlighted.

Catalytic reaction mechanism of formaldehyde oxidation by oxygen species over Pt/TiO2 catalyst

Theoretical calculations based on density functional theory (DFT) were employed to uncover the molecular-level oxidation mechanism of HCHO over Pt/TiO₂ surface. All the three possible reaction mechanisms including Eley-Rideal mechanism, Langmuir-Hinshelwood mechanism and Mars-Van Krevelen mechanism were deeply investigated to determine the primary channel of HCHO oxidation on Pt/TiO₂ catalyst. The adsorption energies and geometries show that HCHO and O₂ are chemically adsorbed on Pt and Ti sites of the Pt/TiO₂ catalyst surface, respectively. The adsorption energy of O₂ (-141.91 kJ/mol) is higher than that of HCHO (-122.03 kJ/mol). HCHO oxidation reaction mainly occurs through the Eley-Rideal mechanism: gaseous HCHO reacts with activated O produced from the dissociation reaction of molecular oxygen on Pt/TiO₂ surface by comparing the three possible mechanisms. HCHO oxidation reaction prefers the pathway of HCHO → H₂CO₂ → HCO₂ → CO₂. In the whole HCHO oxidation reaction, the elementary reaction of HCO₂ dehydrogenation presents the highest activation energy barrier of 230.45 kJ/mol. Therefore, HCO₂ dehydrogenation is recognized as the rate-determining step. The proposed skeletal reaction scheme can be used to well understand the microcosmic reaction process of HCHO oxidation on Pt/TiO₂ catalyst.

Highly Efficient MnO2/AlOOH Composite Catalyst for Indoor Low-Concentration Formaldehyde Removal at Room Temperature

Indoor formaldehyde from substandard furniture and decorative materials seriously endangers human health. How to remove effectively indoor formaldehyde with low concentration at room temperature is a challenging problem. Using a MnO₂/AlOOH composite by the MnO₂ modification as a catalyst provides an effective approach to solve this challenge. Here, a new type of MnO₂/AlOOH composite catalyst with high ability to remove indoor low-concentration formaldehyde was prepared by redox reaction at room temperature. A MnO₂/AlOOH composite with a homogeneous dispersion of MnO₂ has high specific surface area and a large amount of surface hydroxyl (-OH) which plays a major role in the adsorption of formaldehyde. A partially crystalline structure was observed in the composite, which contains multivalent Mn ions and a large number of vacancy defects. The surface -OH of composite shows strong oxidation activity through the charge exchange of multivalent Mn ions and vacancy defects. The composite has a higher ability to remove indoor low-concentration formaldehyde compared to the birnessite MnO₂ at room temperature. This study proposes a new idea for the improvement of catalytic performance in the structure and composition of the catalyst.

Efficient activation of Pd/CeO2 catalyst by non-thermal plasma for complete oxidation of indoor formaldehyde at room temperature

Formaldehyde is a typical indoor air pollutant and its removal is essential to protect human health and meet environmental regulations. Efficient activation of Pd/CeO₂ catalyst by non-thermal plasma was investigated to achieve complete oxidation of formaldehyde at room temperature. The catalyst exhibited better activity and stability than conventional thermal reduced sample. Its HCHO conversion to CO₂ kept at over 80% during 300 min test at a gas hourly space velocity of 150, 000 mL/g/h and HCHO concentration of 100 ppm. While the conversion dropped from 70% to 50% within 300 min test for the sample reduced at 300 °C. Compared with thermal reduced catalyst, plasma reduced sample exhibited more abundant surface active oxygen species, smaller palladium particle size and narrower particle size distribution. Moreover, palladium particles were partial covered by ceria layer for thermal reduced sample. Although strong interaction between palladium and ceria could be formed, the loss of metallic palladium occurs and hence the oxygen activation and mobility abilities are blocked. In situ DRIFTs results suggested that the intermediates over Pd/CeO₂ catalyst were mainly formate, dioxymethylene and polyoxymethylene species, and the formate oxidation into CO₂ process was highly promoted in the presence of water.