Water reduction systems associated with homoleptic cyclometalated iridium complexes of various 2-phenylpyridines

Construction of Robust Iridium(III) Complex-Based Photosensitizer for Boosting Hydrogen Evolution

Developing a photosensitizer with high efficiency and long-term stability for photocatalytic hydrogen evolution is highly desirable yet remains a challenge. Herein, a novel Ir(III) complex-based photosensitizer (Ir3) bearing coumarin and triphenylamine groups is designed. Ir3 exhibits record activity and durability among reported transition metal complexes for photocatalytic hydrogen evolution, with a TON of 198,363 and a duration of 214 h. The excellent photocatalytic performance of Ir3 can be attributed to the synergistic effect of coumarin and triphenylamine, which improves the visible light absorption, charge separation, and electron transfer capacity of photosensitizers. This is an efficient and long-lived Ir(III) photosensitizer constructed on the basis of a synergistic approach, which could provide a new insight for the development of high-performance Ir(III) photosensitizers at the molecular level.

Homoleptic Al(III) Photosensitizers for Durable CO2 Photoreduction

Exploiting noble-metal-free systems for high-performance photocatalytic CO₂ reduction still presents a key challenge, partially due to the long-standing difficulties in developing potent and durable earth-abundant photosensitizers. Therefore, based on the very cheap aluminum metal, we have deployed a systematic series of homoleptic Al(III) photosensitizers featuring 2-pyridylpyrrolide ligands for CO₂ photoreduction. The combined studies of steady-state and time-resolved spectroscopy as well as quantum chemical calculations demonstrate that in anerobic CH₃CN solutions at room temperature, visible-light excitation of the Al(III) photosensitizers leads to an efficient population of singlet excited states with nanosecond-scale lifetimes and notable emission quantum yields (10-40%). The results of transient absorption spectroscopy further identified the presence of emissive singlet and unexpectedly nonemissive triplet excited states. More importantly, the introduction of methyl groups at the pyrrolide rings can greatly improve the visible-light absorption, reducing power, and durability of the Al(III) photosensitizers. With triethanolamine, BIH (1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole), and an Fe(II)-quaterpyridine catalyst, the most methylated Al(III) photosensitizer achieves an apparent quantum efficiency of 2.8% at 450 nm for selective (>99%) CO₂-to-CO conversion, which is nearly 28 times that of the unmethylated one (0.1%) under identical conditions. The optimal system realizes a maximum turnover number of 10250 and higher robustness than the systems with Ru(II) and Cu(I) benchmark photosensitizers. Quenching experiments using fluorescence spectroscopy elucidate that the photoinduced electron transfer in the Al(III)-sensitized system follows a reductive quenching pathway. The remarkable tunability and cost efficiency of these Al(III) photosensitizers should allow them as promising components in noble-metal-free systems for solar fuel conversion.

Neutral Cyclometalated Ir(III) Complexes with Pyridylpyrrole Ligand for Photocatalytic Hydrogen Generation from Water

To explore structure-activity relationships with respect to light-harvesting behavior, a family of neutral iridium complexes [Ir(ppy)₂(L_R)] 1-4 (where ppy = 2-phenylpyridine, and N̂N = 2-(1H-pyrrol-2-yl)pyridine and its functionalized derivatives) were designed and synthesized. The structural modifications in metal complexes are accomplished through the attributions of electron-donating CH₃ in 2, OCH₃ in 3, and electron-withdrawing CF₃ in 4. The structural analysis displays that the pyridylpyrrole acts as one-negative charged bidentated ligand to chelate the iridium center. The electrochemical and photophysical properties of these complexes were systematically studied. The neutral 1-4 as well as the ionic structurally analogous [Ir(ppy)₂(bpy)](PF₆) (5) were utilized as PSs in photocatalytic hydrogen generation from water with [Co(bpy)₃](PF₆)₂ as catalyst and triethanolamine (TEOA) as electron sacrificial agent in the presence of salt LiCl. Complex 1 maintains activity for more than 144 h under irradiation, and the total turnover number is up to 1768. The electrochemical properties and the quenching reaction indicate the H₂ generation by neutral complexes 1-4 is involved exclusively in the oxidative quenching process.

Visible-Light-Driven Hydrogen Production and Polymerization using Triarylboron-Functionalized Iridium(III) Complexes

The development of novel iridium(III) complexes has continued as an important area of research owing to their highly tunable photophysical properties and versatile applications. In this report, three heteroleptic dimesitylboron-containing iridium(III) complexes, [Ir(p-B-ppy)₂ (N^N)]⁺ {p-B-ppy=2-(4-dimesitylborylphenyl)pyridine; N^N=dipyrido[3,2-a:2',3'-c]phenazine (dppz) (1), dipyrido[3,2-d:2',3'-f]quinoxaline (dpq) (2), and 1,10-phenanthroline (phen) (3)}, were prepared and fully characterized electrochemically, photophysically, and computationally. Altering the conjugated length of the N^N ligands allowed us to tailor the photophysical properties of these complexes, especially their luminescence wavelength, which could be adjusted from λ=583 to 631 nm in CH₂ Cl₂ . All three complexes were evaluated as visible-light-absorbing sensitizers for the photogeneration of hydrogen from water and as photocatalysts for the photopolymerization of methyl methacrylate. The results showed that all of them were active in both photochemical reactions. High activity for the photosensitizer (over 1158 turnover numbers with 1) was observed, and the system generated hydrogen even after 20 h. Additionally, poly(methyl methacrylate) with a relatively narrow molecular-weight distribution was obtained if an initiator (i.e., ethyl α-bromophenylacetate) was used. The living character of the photoinduced polymerization was confirmed on the basis of successful chain-extension experiments.

Metal-complex chromophores for solar hydrogen generation

Solar H₂ generation from water has been intensively investigated as a clean method to convert solar energy into hydrogen fuel. During the past few decades, many studies have demonstrated that metal complexes can act as efficient photoactive materials for photocatalytic H₂ production. Here, we review the recent progress in the application of metal-complex chromophores to solar-to-H₂ conversion, including metal-complex photosensitizers and supramolecular photocatalysts. A brief overview of the fundamental principles of photocatalytic H₂ production is given. Then, different metal-complex photosensitizers and supramolecular photocatalysts are introduced in detail, and the most important factors that strictly determine their photocatalytic performance are also discussed. Finally, we illustrate some challenges and opportunities for future research in this promising area.

Efficient photocatalytic water reduction by a cobalt(ii) tripodal iminopyridine complex

Enhanced reactivity is observed in a cobalt tripodal iminopyridine WRC bearing a metal active site with a trigonal pyramidal coordination geometry.

Neutral nickel(II) phthalocyanine as a stable catalyst for visible-light-driven hydrogen evolution from water

Neutral nickel(ii) phthalocyanine was found to be an efficient and stable catalyst for photocatalytic H2 evolution from water when coupled with an iridium complex as the photosensitizer and triethanolamine as the sacrificial electron donor. The result shows that the Ni-N sigma bond can enhance the stability of the catalyst.

Effective Cellular Morphology Analysis for Differentiation Processes by a Fluorescent 1,3a,6a-Triazapentalene Derivative Probe in Live Cells

Nuclear and cytoplasmic morphological changes provide important information about cell differentiation processes, cell functions, and signal responses. There is a strong desire to develop a rapid and simple method for visualizing cytoplasmic and nuclear morphology. Here, we developed a novel and rapid method for probing cellular morphological changes of live cell differentiation process by a fluorescent probe, TAP-4PH, a 1,3a,6a-triazapentalene derivative. TAP-4PH showed high fluorescence in cytoplasmic area, and visualized cytoplasmic and nuclear morphological changes of live cells during differentiation. We demonstrated that TAP-4PH visualized dendritic axon and spine formation in neuronal differentiation, and nuclear structural changes during neutrophilic differentiation. We also showed that the utility of TAP-4PH for visualization of cytoplasmic and nuclear morphologies of various type of live cells. Our visualizing method has no toxicity and no influence on the cellular differentiation and function. The cell morphology can be rapidly observed after addition of TAP-4PH and can continue to be observed in the presence of TAP-4PH in cell culture medium. Moreover, TAP-4PH can be easily removed after observation by washing for subsequent biological assay. Taken together, these results demonstrate that our visualization method is a powerful tool to probe differentiation processes before subsequent biological assay in live cells.

Evaluation of bis-cyclometalated alkynylgold(iii) sensitizers for water photoreduction to hydrogen

Gold(iii) acetylide complexes actively catalyzed the light-driven evolution of hydrogen in water when using [Co(2,2′-bipyridine)₃]Cl₂ or [Rh(4,4′-di-tert-butyl-2,2′-bipyridine)₃](PF₆)₃ as a H₂-evolved catalyst.

Hydrogen photogeneration promoted by efficient electron transfer from iridium sensitizers to colloidal MoS2 catalysts

We report the utilization of colloidal MoS2 nanoparticles (NPs) for multicomponent photocatalytic water reduction systems in cooperation with a series of cyclometalated Ir(III) sensitizers. The effects of the particle size and particle dispersion of MoS2 NPs catalyst, reaction solvent and the concentration of the components on hydrogen evolution efficiency were investigated. The MoS2 NPs exhibited higher catalytic performance than did other commonly used water reduction catalysts under identical experiment conditions. The introduction of the carboxylate anchoring groups in the iridium complexes allows the species to be favorably chem-adsorbed onto the MoS2 NPs surface to increase the electron transfer, resulting in enhancement of hydrogen evolution relative to the non-attached systems. The highest apparent quantum yield, which was as high as 12.4%, for hydrogen evolution, was obtained (λ = 400 nm).