Electronic Coupling of Cobalt Nanoparticles to Nitrogen-Doped Graphene for Oxygen Reduction and Evolution Reactions

Cobalt nanoparticles embedded into nitrogen-doped graphene with abundant macropores as a bifunctional electrocatalyst for rechargeable zinc-air batteries

Nitrogen doped carbon materials containing transition metal nanoparticles have attracted much attention as bifunctional oxygen electrocatalysts. In this paper, the template etching method is used to obtain the nitrogen-doped graphene with abundant macropores embedded with cobalt nanoparticles (Co@N-C). The prepared Co@NC-800 catalyst has a half-wave potential (E 1/2= 0.835V) close to Pt/C and good stability in excess of Pt/C for oxygen reduction reaction (ORR). At the same time, the catalyst has good oxygen evolution reaction (OER) performance. In addition, zinc-air batteries (ZABs) based on the Co@NC-800 catalyst show good cycle stability of up to 200000 s and high power density of 73.5 mW cm -2 . The synergistic effect of the integrated component between nitrogen-doped graphene and cobalt nanoparticles as well as the macroporous structure endow Co@NC-800 with abundant exposed active sites and mass/electron transfer capacity, thus leading to the high electrocatalytic activity. This work shows potential for practical applications in electrochemistry.

Trace metals dramatically boost oxygen electrocatalysis of N-doped coal-derived carbon for zinc-air batteries

The commercialization of metal-air batteries requires efficient, low-cost, and stable bifunctional electrocatalysts for reversible electrocatalysis of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). The modification of natural coal by heteroatoms such as N and S, or metal oxide species, has been demonstrated to form very promising electrocatalysts for the ORR and OER. However, it remains elusive and underexplored as to how the impurity elements in coal may impact the electrocatalytic properties of coal-derived catalysts. Herein, we explore the influence of the presence of various trace metals that are notable impurities in coal, including Al, Si, Ca, K, Fe, Mg, Co, Mn, Ni, and Cu, on the electrochemical performance of the prepared catalysts. The constructed Zn-air batteries are further shown to be able to power green LED lights for more than 80 h. The charge-discharge polarization curves exhibited excellent and durable rechargeability over 500 (ca. 84 h) continuous cycles. The promotional effect of the trace elements is believed to accrue from a combination of electronic structure modification of the active sites, enhancement of the active site density, and formation of a conductive 3-dimensional hierarchical network of carbon nanotubes.

Fabricating 3D Macroscopic Graphene-Based Architectures with Outstanding Flexibility by the Novel Liquid Drop/Colloid Flocculation Approach for Energy Storage Applications

Inspired by "water ripples" in nature and the flocculation phenomenon in colloid chemistry, a novel liquid drop/colloid flocculation approach is developed to fabricate an extremely flexible and compressible 3D macroscopic graphene-based architecture (hydrogels or aerogels), via a new coagulation-induced self-assembly mechanism. This facile and universal technique can be achieved in a neutral, acidic, or basic coagulation bath, producing microsized hydrogels with various structures, such as mushroom, circle, disc shapes, etc. The method also allows us to introduce various guest materials in the graphene matrix using transition metal salts as the coagulating bath. A mushroom-shaped NiCo oxide/GS hybrid aerogel (diameter: 3 mm) is prepared as an example, with ultrathin NiCo oxide nanosheets in situ grown onto the surface of graphene. By employing as binder-free electrodes, these hybrid aerogels exhibit a specific capacitance of 858.3 F g^-1 at 2 A g^-1, as well as a good rate capability and cyclic stability. The asymmetric supercapacitor, assembling with the hybrid aerogels as cathode and graphene hydrogels as anode materials, could deliver an energy density of 21 Wh kg^-1 at power density of 4500 W kg^-1. The ease of synthesis and the feasibility of obtaining highly flexible aerogels with varied morphologies and compositions make this method a promising one for use in the field of biotechnology, electrochemistry, flexible electronics, and environment applications.

Self-supporting Co3O4/Graphene Hybrid Films as Binder-free Anode Materials for Lithium Ion Batteries

A self-supporting Co₃O₄/graphene hybrid film has been constructed via vacuum filtration of Co(OH)₂ nanosheet and graphene, followed by a two-step thermal treatment. Within the hybrid film, Co₃O₄ nanoparticles with size of 40~60 nm uniformly in-situ grew on the surface of graphene, forming a novel porous and interleaved structure with strong interactions between Co₃O₄ nanoparticles and graphene. Such fascinating microstructures can greatly facilitate interfacial electron transportation and accommodate the volume changes upon Li ions insertion and extraction. Consequently, the binder-less hybrid film demonstrated extremely high reversible capacity (1287.7 mAh g⁻¹ at 0.2 A g⁻¹), excellent cycling stability and rate capability (1110 and 800 mAh g⁻¹ at 0.5 and 1.0 A g⁻¹, respectively).

Synthesis of cobalt-impregnated carbon composite derived from a renewable resource: Characterization and catalytic performance evaluation

A novel nitrogen-doped biochar embedded with cobalt (Co-NB) was fabricated via pyrolysis of glucose pretreated with melamine (N donor) and Co(II). The Co-NB showed high catalytic capability by converting p-nitrophenol (PNP) into p-aminophenol (PAP) by NaBH₄. The analyses of FE-SEM, TEM, BET, XRD, Raman, and X-ray photoelectron spectroscopy XPS of the Co-NB showed hierarchical porous structure (BET 326.5m²g^-1 and pore volume: 0.2403cm³g^-1) with well-dispersed Co nanoparticles (20-60nm) on the N-doped graphitic biochar surface. The Co-NB showed higher PNP reduction capability compared to the Co-biochar without N-doping, achieving 94.3% removal within 4min at 0.24gL^-1 catalyst dose and initial concentration of 0.35mM PNP. Further conversion experiments under varying environmental conditions (e.g., NaBH₄ concentration (7.5-30mM), biochar dosage (0.12-1.0gL^-1), initial PNP concentration (0.08-0.17mM)) were conducted in batch mode. The reusability of Co-NB was validated by the repetitive conversion experiments (5cycles). The overall results demonstrated biochar potential as catalysts for environmental applications if properly designed.