Efficient Ionic-Liquid-Promoted Chemical Fixation of CO2 into α-Alkylidene Cyclic Carbonates

Carboxylative cyclization of atmospheric CO2 with alkynol catalyzed by a 1-methylhydantoin anion-functionalized ionic liquid via chelative interactions

Metal- and solvent-free carboxylative cyclization of atmospheric CO2 with alkynol can be achieved using a 1-methylhydantoin anion-functionalized ionic liquid. 1H NMR, in situ FT-IR and DFT calculations indicate that the 1-methylhydantoin anion acts as a "pincer ligand" to form chelative interactions with the hydroxyl group, thereby effectively activating the alkynol.

Conversion of atmospheric CO2 catalyzed by thiolate-based ionic liquids under mild conditions: efficient synthesis of 2-oxazolidinones

Thiolate-based ionic liquids, specifically the catalyst [TBP][2-Tp], have demonstrated their efficiency in catalyzing the reaction of CO2 with propargylic amine. This novel synthetic method can be used to synthesize various 2-oxazolidinone derivatives with high yields. The catalyst can be easily regenerated and reused without any decline in its catalytic activity. Experimental and spectroscopic investigations have confirmed that the high activity of [TBP][2-Tp] is attributed to the synergistic effect of its S and N sites in activating CO2, rather than depending solely on basicity to activate the amino group of propargylic amine. These findings highlight the significant potential of thiolate-based ionic liquids for applications in CO2 activation and conversion.

Ionic Liquid-Catalyzed CO2 Conversion for Valuable Chemicals

CO2 is not only the main gas that causes the greenhouse effect but also a resource with abundant reserves, low price, and low toxicity. It is expected to become an important "carbon source" to replace oil and natural gas in the future. The efficient and clean resource utilization of CO2 has shown important scientific and economic value. Making full use of abundant CO2 resources is in line with the development direction of green chemistry and has attracted the attention of scientists. Environmentally friendly ionic liquids show unique advantages in the capture and conversion of CO2 due to their non-volatilization, designable structure, and good solubility, and show broad application prospects. The purpose of this paper is to discuss the research on the use of an ionic liquid as a catalyst to promote the synthesis of various value-added chemicals in CO2, hoping to make full use of CO2 resources while avoiding the defects of the traditional synthesis route, such as the use of highly toxic raw materials, complicated operation, or harsh reaction conditions. The purpose of this paper is to provide reference for the application and development of ionic liquids in CO2 capture and conversion.

Does the active hydrogen atom in the hydantoin anion affect the physical properties, CO2 capture and conversion of ionic liquids?

Compared to the effect of the active hydrogen atom in the cation in protic ionic liquids (ILs) on their properties and applications, there are very few reports on the role of the active hydrogen atom in the anion. In order to better understand the role of the active hydrogen atom in the anion, the physical properties, CO2 capture and conversion of three hydantoin-based anion-functionalized ILs ([P4442][Hy], [P4442]2[Hy], and [HDBU][Hy]) have been investigated via experiments, spectroscopy, and DFT calculations in this work. The results show that the active hydrogen atom in the anion can form anionic hydrogen bonding networks, which significantly increase the melting point and viscosity and decrease the basicity of the IL, thereby weakening its ability to capture and convert CO2. Interestingly, [P4442][Hy] undergoes a solid/liquid two-phase transition during CO2 absorption/desorption due to the formation of quasi-intramolecular hydrogen bonding between the active hydrogen atom and the O- atom of the absorbed CO2, suggesting that the presence of the active hydrogen atom gives [P4442][Hy] the potential to be an excellent molecular switch. As there is no active hydrogen atom in the anion of [P4442]2[Hy], it shows excellent CO2 capture and conversion performance through the double-site interaction. [HDBU][Hy] shows the weakest catalytic CO2 conversion due to the presence of active hydrogen atoms on both its anion and cation. Therefore, the active hydrogen atom in the anion may play a more important role in the properties and potential applications of ILs than the active hydrogen atom in the cation.

Conjugated Microporous Polymers for Catalytic CO2 Conversion

Rising carbon dioxide (CO2) levels in the atmosphere are recognized as a threat to atmospheric stability and life. Although this greenhouse gas is being produced on a large scale, there are solutions to reduction and indeed utilization of the gas. Many of these solutions involve costly or unstable technologies, such as air-sensitive metal-organic frameworks (MOFs) for CO2 capture or "non-green" systems such as amine scrubbing. Conjugated microporous polymers (CMPs) represent a simpler, cheaper, and greener solution to CO2 capture and utilization. They are often easy to synthesize at scale (a one pot reaction in many cases), chemically and thermally stable (especially in comparison with their MOF and covalent organic framework (COF) counterparts, owing to their amorphous nature), and, as a result, cheap to manufacture. Furthermore, their large surface areas, tunable porous frameworks and chemical structures mean they are reported as highly efficient CO2 capture motifs. In addition, they provide a dual pathway to utilize captured CO2 via chemical conversion or electrochemical reduction into industrially valuable products. Recent studies show that all these attractive properties can be realized in metal-free CMPs, presenting a truly green option. The promising results in these two fields of CMP applications are reviewed and explored here.

Energy Applications of Ionic Liquids: Recent Developments and Future Prospects

Ionic liquids (ILs) consisting entirely of ions exhibit many fascinating and tunable properties, making them promising functional materials for a large number of energy-related applications. For example, ILs have been employed as electrolytes for electrochemical energy storage and conversion, as heat transfer fluids and phase-change materials for thermal energy transfer and storage, as solvents and/or catalysts for CO2 capture, CO2 conversion, biomass treatment and biofuel extraction, and as high-energy propellants for aerospace applications. This paper provides an extensive overview on the various energy applications of ILs and offers some thinking and viewpoints on the current challenges and emerging opportunities in each area. The basic fundamentals (structures and properties) of ILs are first introduced. Then, motivations and successful applications of ILs in the energy field are concisely outlined. Later, a detailed review of recent representative works in each area is provided. For each application, the role of ILs and their associated benefits are elaborated. Research trends and insights into the selection of ILs to achieve improved performance are analyzed as well. Challenges and future opportunities are pointed out before the paper is concluded.

Aluminum Porphyrin-Based Ionic Porous Aromatic Frameworks Having High Surface Areas and Highly Dispersed Dual-Function Sites for Boosting the Catalytic Conversion of CO2 into Cyclic Carbonates

Multifunctionalization of porous organic polymers toward synergistic CO₂ catalysis has drawn much attention in recent decades, but it still faces many challenges. Herein, we develop a facile, simple, and efficient strategy to obtain a series of aluminum porphyrin-based ionic porous aromatic frameworks (iPAFs), which are considered excellent bifunctional catalysts for converting CO₂ into cyclic carbonates without any cocatalyst under mild and solvent-free conditions. By increasing the amounts of tetraphenylmethane fragments in the porphyrin backbones, the cooperative effect between Lewis acidic metal centers and nucleophilic ionic sites has been enhanced and then the significant improvement of catalytic activity can be achieved owing to the high surface areas (up to 719 m²·g^-1), abundant hierarchical micro-mesopores, and prominent CO₂ adsorption capacities (up to 1.8 mmol·g^-1 at 273 K) as well as highly dispersed dual-function sites. More fascinatingly, high-active AlPor-iPAF-3 enables CO₂ cycloaddition to perform with diluted CO₂ (15% CO₂ in 85% N₂, v/v) or under ambient conditions. Therefore, this postsynthetic modification procedure in combination with the framework dilution strategy provides a new approach to fabricating high-surface-area metalloporphyrin-based porous ionic polymers (PIPs) with hierarchical structures, which is conducive to improving the accessibility of multiple active sites around substrates.

Understanding of the interactions between azole-anion-based ionic liquids and 2-methyl-3-butyn-2-ol from the experimental perspective: the cage effect

The interactions between azole-anion-based ionic liquids (AILs) and 2-methyl-3-butyn-2-ol (MBY) play an important role in AIL-promoted carboxylative cyclization of MBY with CO₂. To better understand the interactions between AILs ([P₆₆₆₁₄][Im], [P₆₆₆₁₄][4-MeIm], and [P₆₆₆₁₄][4-BrIm]) and MBY, a detailed investigation from the experimental perspective has been carried out in this study. The results show that the derivative of viscosity (η) with the mole fraction of AIL (x_AIL) of AIL + MBY mixtures appears to have the maximum value when x_AIL ≈ 0.3, while ¹H NMR chemical shifts of P-CH₂ of [P₆₆₆₁₄]⁺ reach the minimum value at x_AIL ≈ 0.3, indicating that [P₆₆₆₁₄]⁺ of AILs tend to self-aggregate. The interaction parameters (g_ji-g_ii) of the systems obtained from η by the Eyring-UNIQUAC equation are positive, and the difference between the bulk and local composition (x_i-x_ii) is always negative, indicating that AILs can interact with MBY. Moreover, excess molar volumes and isentropic compressibility deviations are all negative deviations and become more negative as the temperature increases, reaching a minimum value at x_AIL ≈ 0.30, indicating that azole-based anions can form H-bonds with MBY, and MBY molecules tend to enter the aggregates formed by AILs. Consequently, the cage effect is proposed to describe the interactions between AILs and MBY: MBY first enters the cage formed by the aggregation of [P₆₆₆₁₄]⁺, and then forms H-bonds with azole-based anions. Finally, the sizes of the particles of the [P₆₆₆₁₄][Im] + MBY mixture from dynamic light scattering increase first and then decrease with x_AIL, with the maximum of 122 nm at x_AIL ≈ 0.25, which confirms the rationality of the cage effect.

Exovinylene Cyclic Carbonates: Multifaceted CO2 -Based Building Blocks for Modern Chemistry and Polymer Science

Carbon dioxide is a renewable, inexhaustible, and cheap alternative to fossil resources for the production of fine chemicals and plastics. It can notably be converted into exovinylene cyclic carbonates, unique synthons gaining momentum for the preparation of an impressive range of important organic molecules and functional polymers, in reactions proceeding with 100 % atom economy under mild operating conditions in most cases. This Review summarizes the recent advances in their synthesis with particular attention on describing the catalysts needed for their preparation and discussing the unique reactivity of these CO₂ -based heterocycles for the construction of diverse organic building blocks and (functional) polymers. We also discuss the challenges and the future perspectives in the field.

Recent Advances in the Synthesis of Five-Membered Cyclic Carbonates and Carbamates from Allylic or Propargylic Substrates and CO2

The organic carbamates and carbonates are highly desirable compounds that have found a wide range of applications in drug design, medicinal chemistry, material science, and the polymer industry. The development of new catalytic carbonate and carbamate forming reactions, which employ carbon dioxide as a cheap, green, abundant, and easily available reagent, would thus represent an ideal substitution for existing methods. In this review, the advancements in the catalytic conversion of allylic and propargylic alcohols and amines to corresponding five-membered cyclic carbonates and carbamates are summarized. Both the metal- and the organocatalyzed methods are reviewed, as well as the proposed mechanisms and key intermediates of the illustrated carbonate and carbamate forming reactions.

En Route to CO2-Based (a)Cyclic Carbonates and Polycarbonates from Alcohols Substrates by Direct and Indirect Approaches

This review is dedicated to the state-of-the art routes used for the synthesis of CO2-based (a)cyclic carbonates and polycarbonates from alcohol substrates, with an emphasis on their respective main advantages and limitations. The first section reviews the synthesis of organic carbonates such as dialkyl carbonates or cyclic carbonates from the carbonation of alcohols. Many different synthetic strategies have been reported (dehydrative condensation, the alkylation route, the “leaving group” strategy, the carbodiimide route, the protected alcohols route, etc.) with various substrates (mono-alcohols, diols, allyl alcohols, halohydrins, propargylic alcohols, etc.). The second section reviews the formation of polycarbonates via the direct copolymerization of CO2 with diols, as well as the ring-opening polymerization route. Finally, polycondensation processes involving CO2-based dimethyl and diphenyl carbonates with aliphatic and aromatic diols are described.

Acylamido-based anion-functionalized ionic liquids for efficient synthesis of poly(isosorbide carbonate)

A catalytic system containing an acylamido-based anion was developed for the synthesis of bio-based polycarbonate by efficient activation of monomers.

Azo-Functionalized Zirconium-Based Metal-Organic Polyhedron as an Efficient Catalyst for CO2 Fixation with Epoxides

Chemical fixation of CO₂ as C1 source at ambient temperature and low pressure is an energy-saving way to make use of the green-house gas, but it still remains a challenge since efficient catalyst with high catalytic active sites is required. Here, a novel monoclinic azo-functionalized Zr-based metal-organic polyhedron (Zr-AZDA) has been prepared and applied in CO₂ fixation with epoxides. The inherent azo groups not only endow Zr-AZDA with good solubilization, but also act as basic sites to enrich CO₂ showing efficient synergistic catalysis as confirmed by TPD-CO₂ analysis. XPS results demonstrate that the Zr active sites in Zr-AZDA possess suitable Lewis acidity, which satisfies both substrates activation and products desorption. DFT calculation indicates the energy barrier of the rate-determining step in CO₂ cycloaddition could be reduced remarkably (by ca. 60.9 %) in the presence of Zr-AZDA, which may rationalize the mild and efficient reaction condition employed (80 °C and 1 atm of CO₂ ). The work provides an effective multi-functional cooperative method for improvement of CO₂ cycloaddition.

Ionic-Liquid-Catalyzed Approaches under Metal-Free Conditions

ConspectusMetal-free catalysis is a promising protocol to access chemicals without metal contamination. Ionic liquids (ILs) that are entirely composed of organic cations and inorganic/organic anions have emerged as promising alternatives to molecular solvents and metal catalysts due to their unique properties such as structural tunability, the coexistence of multiple interactions among ions (e.g., electrostatic interaction, hydrogen bonding, van de Waals forces, acid/base interactions, hydrophilic/hydrophobic interactions, etc.), unique affinity for a wide range of chemicals, good chemical and thermal stability, and quite low volatility. ILs have shown potential applications in various chemical processes.In this Account, we systematically described our most recent work on IL-catalyzed approaches under metal-free conditions. The first section presents the IL-catalyzed strategies toward the transformation of CO2 to value-added chemicals, focusing on the CO2-reactive IL-catalyzed CO2 transformation to various heterocycles and the IL-catalyzed reductive transformation of CO2 to chemicals. In these approaches, we designed task-specific ILs that are able to chemically capture and activate CO2 via forming anion-based carbonate/carbamate or cation-based carboxylate/carbamate intermediates, thus further accomplishing its transformation to a series of heterocycles including quinazoline-2,4(1H,3H)-diones, cyclic carbonates, 2-oxazolidinones, oxazolones, and benzimidazolones under metal-free conditions. For the IL-catalyzed approaches to reducing CO2 with hydrosilanes to chemicals, we employed ILs capable of activating the Si-H bond in hydrosilanes and the N-H bond in amine substrates via H-bonding, thus achieving the reductive transformation of CO2 to formamides, benzimidazoles, and benzothiazoles via cooperative catalysis. The second section describes our finding on the IL-catalyzed hydration of the C≡C bond in propargylic alcohols. Azolate anion-based ILs that can chemically capture CO2 via the formation of carbamates could serve as robust nucleophiles to attack the C≡C bond in propargylic alcohols and then efficiently catalyze the hydration of propargylic alcohols to produce α-hydroxy ketones with the assistance of atmospheric CO2 gas under metal-free conditions. The third section unveils the cooperative catalysis strategy of hydrogen bond donors and acceptors of ILs for chemical reactions. In the hydrogen-bonding catalysis protocols, cations of the ILs act as H-bond donors and anions, as acceptors, forming H-bonds with the reactant molecules, respectively, in opposite ways, which can cooperatively catalyze the ring-closing C-O/C-O bond metathesis reactions of aliphatic diethers to O-heterocycles, the dehydrative etherification of alcohols to ethers, and direct oxidative esterification of alcohols to esters. We believe that these IL-catalyzed metal-free processes and strategies display promising practical applications, and their commercialization would bring great benefits to the production of the as-afforded value-added chemicals.

Efficient and Reusable Iron Catalyst to Convert CO2 into Valuable Cyclic Carbonates

The production of cyclic carbonates from CO2 cycloaddition to epoxides, using the C-scorpionate iron(II) complex [FeCl2{κ3-HC(pz)3}] (pz = 1H-pyrazol-1-yl) as a catalyst, is achieved in excellent yields (up to 98%) in a tailor-made ionic liquid (IL) medium under mild conditions (80 °C; 1-8 bar). A favorable synergistic catalytic effect was found in the [FeCl2{κ3-HC(pz)3}]/IL system. Notably, in addition to exhibiting remarkable activity, the catalyst is stable during ten consecutive cycles, the first decrease (11%) on the cyclic carbonate yield being observed during the 11th cycle. The use of C-scorpionate complexes in ionic liquids to afford cyclic carbonates is presented herein for the first time.

Green Synthesis of 2-Oxazolidinones by an Efficient and Recyclable CuBr/Ionic Liquid System via CO2, Propargylic Alcohols, and 2-Aminoethanols

With the aim of profitable conversion of carbon dioxide (CO2) in an efficient, economical, and sustainable manner, we developed a CuBr/ionic liquid (1-butyl-3-methylimidazolium acetate) catalytic system that could efficiently catalyze the three-component reactions of propargylic alcohols, 2-aminoethanols, and CO2 to produce 2-oxazolidinones and α-hydroxy ketones. Remarkably, this catalytic system employed lower metal loading (0.0125–0.5 mol%) but exhibited the highest turnover number (2960) ever reported, demonstrating its excellent activity and sustainability. Moreover, our catalytic system could efficiently work under 1 atm of CO2 pressure and recycle among the metal-catalyzed systems.

Carbon Dioxide Conversion Upgraded by Host-guest Cooperation between Nitrogen-Rich Covalent Organic Framework and Imidazolium-Based Ionic Polymer

The chemical conversion of CO₂ into value-added chemicals is one promising approach for CO₂ utilization. It is crucial to explore highly efficient catalysts containing task-specific components for CO₂ fixation. Here, a host-guest catalytic system was developed by integrating nitrogen-rich covalent organic framework (TT-COF) and imidazolium-based ionic polymer (ImIP), which serve as hydrogen-bonding donor and nucleophilic agent, respectively, for cooperatively facilitating the activation of the epoxides and subsequent CO₂ cycloaddition. The catalytic activity of the host-guest system was remarkably superior to those of ImIP, TT-COF, and their physical mixture. Furthermore, selective adsorption for CO₂ over N₂ rendered this catalytic system effective for the cycloaddition reaction of the simulated flue gas. The protocols for the unification of two catalytically active components provide new opportunities for the development of composite systems in multiple applications.

A CO2-induced ROCO2Na/ROCO2H buffer solution promoted the carboxylative cyclization of propargyl alcohol to synthesize cyclic carbonates

A CO₂-induced ROCO₂Na/ROCO₂H buffer solution is developed and employed in the carboxylative cyclization of propargyl alcohol to generate α-alkylene cyclic carbonates.

Imidazolium-Salt-Functionalized Covalent Organic Frameworks for Highly Efficient Catalysis of CO2 Conversion

The conversion of CO₂ into valuable chemicals is an ideal pathway for CO₂ utilization in industry, although the development of highly efficient catalysts remains a challenge. Herein, the design and synthesis of two covalent organic frameworks (COFs) functionalized with imidazolium salts were reported as catalysts for CO₂ conversion. The resultant COFs possessed highly crystalline structures, showed high stability and surface area, and contained dense catalytic active sites on the pore walls. They exhibited outstanding catalytic performances for the reaction of CO₂ with epoxides without any solvent or cocatalyst under mild conditions and afforded a record turnover number of 495 000. In addition, the COFs could serve as effective catalysts in the reductive reaction of CO₂ with amines. The results presented here thus demonstrate the exceptional potential of the functionalized COFs for various challenging CO₂ transformations.

Recent Advances in the Chemical Fixation of Carbon Dioxide: A Green Route to Carbonylated Heterocycle Synthesis

Carbon dioxide produced by human activities is one of the main contributions responsible for the greenhouse effect, which is modifying the Earth’s climate. Therefore, post-combustion CO2 capture and its conversion into high value-added chemicals are integral parts of today’s green industry. On the other hand, carbon dioxide is a ubiquitous, cheap, abundant, non-toxic, non-flammable and renewable C1 source. Among CO2 usages, this review aims to summarize and discuss the advances in the reaction of CO2, in the synthesis of cyclic carbonates, carbamates, and ureas appeared in the literature since 2017.

Cu(I)/Ionic Liquids Promote the Conversion of Carbon Dioxide into Oxazolidinones at Room Temperature

Recently, the efficient chemical fixation of carbon dioxide (CO₂) into high value chemicals without using noble metal catalysts has become extremely appealing from the viewpoint of sustainable chemistry. In this work, a one-pot three component reaction of propargylic alcohols, anines and CO₂ that can proceed in an atom economy and environmentally benign manner by combination of CuI and tetrabutylphosphonium imidazol ([P₄₄₄₄][Im]) as a catalyst was described. Catalysis studies indicate that this catalytic system is an effective catalyst for the conversion of CO₂ into oxazolidinones at room temperature and ambient pressure without any solvent. The results provide a useful way to design novel noble metal-free catalyst systems for the transformation of CO₂ into other valuable compounds.

Transesterification of Isosorbide with Dimethyl Carbonate Catalyzed by Task-Specific Ionic Liquids

Green synthesis of high-molecular-weight isosorbide-based polycarbonate (PIC) with excellent properties is a tremendous challenge and is profoundly influenced by the precursor. Herein, an ecofriendly catalyst was employed to obtain the more reactive PIC precursor dicarboxymethyl isosorbide (DC) with 99.0 % selectivity through the transesterification reaction of isosorbide with dimethyl carbonate. This is the indispensable stage of a one-pot green synthesis of PIC, playing a critical role in giving an insight into the polymerization mechanism of polymer synthesis through the melt transesterification reaction. To this end, a series of 4-substituted phenolate ionic liquids (ILs) were developed as a new type of high-efficiency catalyst for this reaction. These homogeneous ILs exhibited outstanding catalytic performances. The DC selectivity increased gradually with decreasing IL basicity; among the ILs studied, trihexyl(tetradecyl)phosphonium 4-iodophenolate ([P₆₆₆₁₄ ][4-I-Phen]) showed the highest catalytic activity. Additionally, according to the experimental results and DFT calculations, a plausible nucleophilic activation mechanism was proposed, which confirmed that the reaction is activated through the formation of H-bonds and electrostatic interactions with the IL catalyst. This strategy of tunable basicity and structure of anions in ILs affords an opportunity to develop other ILs for the transesterification reaction, thereby conveniently providing a variety of polymers through a green synthetic pathway.

Photocatalytic Reverse Semi-Combustion Driven by Ionic Liquids

The simple photolysis of CO₂ in aqueous solutions to generate CO and/or hydrocarbons and derivatives in the presence of a catalyst is considered to be a clean and efficient approach for utilizing CO₂ as a C1 building block. Despite the huge efforts dedicated to this transformation using either semiconductors or homogeneous catalysts, only small improvements of the catalytic activity have been achieved so far. This article reports that simple aqueous solutions of organic salts-denominated as ionic liquids-can efficiently photo-reduce CO₂ to CO without using photosensitizers or sacrificial agents. The system relies on the formation of the [CO₂ ]^.- intermediate through homolytic C-C bond cleavage in a cation-CO₂ adduct of imidazolium-based ionic liquids (ILs). The system continuously produced CO up to 2.88 mmol g^-1 of IL after 40 h of irradiation by using an aqueous solution of 1-n-butyl-3-methylimidazolium-2-carboxylate (BMIm.CO₂ ) IL, representing an apparent quantum yield of 3.9 %. The organophotocatalytic principles of our system may help to develop more simple and efficient organic materials for the production of solar fuels from CO₂ under mild conditions, which represents a real alternative to those based on semiconductors and homogeneous metal-based catalysts.

Experimental and theoretical study for CO2 activation and chemical fixation with epoxides

The synthesis of five-membered cyclic carbonates via catalytic cycloaddition reaction of CO₂ with epoxides is considered to be an effective technology for alleviation of the energy crisis and global warming. Various commercial organic bases and ionic salts were used as catalysts, while the relationship of catalytic activity and compound structure has been seldom explored. Herein, a facilely obtained binary catalytic system based on triethylamine/NBu₄Br was developed for CO₂ activation and chemical fixation. The highly efficient catalytic system showed outstanding conversion and above 99% selectivity under metal-free mild reaction conditions (100 °C, 1 atm) in one hour. The detailed process of CO₂ activation and chemical fixation was investigated at the molecular level by a series of experiments and theoretical calculation, which provided a mode for the design and synthesis of a highly efficient catalytic system for conversion of CO₂ under mild conditions.

NEt₃/NBu₄Br works as an excellent metal-free catalyst for CO₂ cycloaddition with epoxides and the detailed process of CO₂ activation by NEt₃ is first studied by theoretical calculation.

Synthesis of tetronic acids from propargylic alcohols and CO2

A direct and practical synthesis of important tetronic acids from easily available propargylic alcohols and carbon dioxide is reported for the first time. This transition-metal-free transformation features high atom- and step-economy, mild reaction conditions, good functional group tolerance and high yield. Preliminary mechanistic studies suggest that the reaction proceeds via cyclization to give alkylidene cyclic carbonate, ring-opening and re-cyclization processes.