Dendrite Suppression by Synergistic Combination of Solid Polymer Electrolyte Crosslinked with Natural Terpenes and Lithium-Powder Anode for Lithium-Metal Batteries

Side Reactions/Changes in Lithium-Ion Batteries: Mechanisms and Strategies for Creating Safer and Better Batteries

Lithium-ion batteries (LIBs), in which lithium ions function as charge carriers, are considered the most competitive energy storage devices due to their high energy and power density. However, battery materials, especially with high capacity undergo side reactions and changes that result in capacity decay and safety issues. A deep understanding of the reactions that cause changes in the battery's internal components and the mechanisms of those reactions is needed to build safer and better batteries. This review focuses on the processes of battery failures, with voltage and temperature as the underlying factors. Voltage-induced failures result from anode interfacial reactions, current collector corrosion, cathode interfacial reactions, overcharge, and over-discharge, while temperature-induced failure mechanisms include SEI decomposition, separator damage, and interfacial reactions between electrodes and electrolytes. The review also presents protective strategies for controlling these reactions. As a result, the reader is offered a comprehensive overview of the safety features and failure mechanisms of various LIB components.

Nitrile-functionalized Poly(siloxane) as Electrolytes for High-Energy-Density Solid-State Li Batteries

In the quest to replace liquid Li-ion electrolytes with safer and non-toxic solid counterparts for Li-ion batteries, polysiloxane polymers have attracted considerable attention as they offer low glass transition temperatures, stability with metallic lithium, and versatility in chemical functionalization of the backbone. Herein, we present the synthesis of Li-ion conductive polysiloxane-based polymers functionalized with 60 % nitrile groups per chain unit. The synthesis procedure is based on the reaction of poly-(dimethylsiloxane-co-methylvinylsiloxane) polymer with 2-cyanoethanethiol, followed by the addition of lithium bis (trifluoromethanesulfonyl) imide. The presented polysiloxane-based polymers exhibit exceptionally high ionic conductivity up to 0.375 mS cm-1 at 60 °C and Li+ ion transfer number of 0.73, one of the highest reported for polymer Li-ion conducting electrolytes. Their electrochemical performance was evaluated in both symmetrical and full-cell configurations to test the utility of synthesized polymers as electrolytes in Li-ion batteries.

Click Chemistry in Lithium-Metal Batteries

Lithium-metal batteries (LMBs) are considered the "holy grail" of the next-generation energy storage systems, and solid-state electrolytes (SSEs) are a kind of critical component assembled in LMBs. However, as one of the most important branches of SSEs, polymer-based electrolytes (PEs) possess several native drawbacks including insufficient ionic conductivity and so on. Click chemistry is a simple, efficient, regioselective, and stereoselective synthesis method, which can be used not only for preparing PEs with outstanding physical and chemical performances, but also for optimizing the stability of solid electrolyte interphase (SEI) layer and elevate the cycling properties of LMBs effectively. Here it is primarily focused on evaluating the merits of click chemistry, summarizing its existing challenges and outlining its increasing role for the designing and fabrication of advanced PEs. The fundamental requirements for reconstructing artificial SEI layer through click chemistry are also summarized, with the aim to offer a thorough comprehension and provide a strategic guidance for exploring the potentials of click chemistry in the field of LMBs.

Modulating Zinc Metal Reversibility by Confined Antifluctuator Film for Durable and Dendrite-Free Zinc Ion Batteries

Aqueous Zn ion batteries are promising systems due to their intrinsic safety, low cost, and non-toxicity, and the Zn corrosion and dendrite growth will cause the poor reversibility of Zn anode. Herein, the porous Zn@C solid, hollow, and yolk-shell microsphere films are developed as Zn anode antifluctuator (ZAAF). The prepared yolk-shell microspheres (Zn@C yolk-shell microsphere [ZCYSM]) film with superior buffering can effectively restrict the deposition of Zn metal in its interior and inhibit the volume expansion during plating/stripping process, thus modulating the Zn2+ flux and enabling stable Zn cycling. As a proof of concept, the ZCYSM@Zn symmetric cells achieve the excellent cyclic stability over 4000 h and cumulative plated capacity of 4 Ah cm-2  at a high current density of 10 mA cm-2 . Concomitantly, the suppressed corrosion reactions and dendrite-free ZAAF significantly improve the durability of full cells (coupled to CaV6 O16 ·3H2 O). Additionally, durable pouch cell and electrochemical neuromorphic inorganic device (ENIDe) are integrated to simulate neural network, providing a strategy for extreme interconnectivity comparable to the human brain.

Organosulfur Materials for Rechargeable Batteries: Structure, Mechanism, and Application

Lithium-ion batteries have received significant attention over the last decades due to the wide application of portable electronics and increasing deployment of electric vehicles. In order to further enhance the performance of the batteries and overcome the capacity limitations of inorganic electrode materials, it is imperative to explore new cathode and functional materials for rechargeable lithium batteries. Organosulfur materials containing sulfur-sulfur bonds as a kind of promising organic electrode materials have the advantages of high capacities, abundant resources, tunable structures, and environmental benignity. In addition, organosulfur materials have been widely used in almost every aspect of rechargeable batteries because of their multiple functionalities. This review aims to provide a comprehensive overview on the development of organosulfur materials including the synthesis and application as cathode materials, electrolyte additives, electrolytes, binders, active materials in lithium redox flow batteries, and other metal battery systems. We also give an in-depth analysis of structure-property-performance relationship of organosulfur materials, and guidance for the future development of organosulfur materials for next generation rechargeable lithium batteries and beyond.

A Brief Review of Gel Polymer Electrolytes Using In Situ Polymerization for Lithium-ion Polymer Batteries

Polymer electrolytes (PEs) have been thoroughly investigated due to their advantages that can prevent severe problems of Li-ion batteries, such as electrolyte leakage, flammability, and lithium dendrite growth to enhance thermal and electrochemical stabilities. Gel polymer electrolytes (GPEs) using in situ polymerization are typically prepared by thermal or UV curing methods by initially impregnating liquid precursors inside the electrode. The in situ method can resolve insufficient interfacial problems between electrode and electrolyte compared with the ex situ method, which could led to a poor cycle performance due to high interfacial resistance. In addition to the abovementioned advantage, it can enhance the form factor of bare cells since the precursor can be injected before polymerization prior to the solidification of the desired shapes. These suggest that gel polymer electrolytes prepared by in situ polymerization are a promising material for lithium-ion batteries.

Regulating Na Electrodeposition by Sodiophilic Grafting onto Porosity-Gradient Gel Polymer Electrolytes for Dendrite-Free Sodium Metal Batteries

Sodium metal batteries have been emerging as promising candidates for post-Li battery systems owing to the natural abundance, low costs, and high energy density of Na metal. However, exploiting an Na metal anode is accompanied by uncontrolled Na electrodeposition, particularly concerning dendrite growth, hampering practical Na metal battery applications. Herein, we propose sodiophilic gel polymer electrolytes with a porosity-gradient Janus structure to alleviate Na dendrite growth. Tethering only 1.1 mol % sodiophilic poly(ethylene glycol) to poly(vinylidene fluoride-co-hexafluoropropylene) suppresses Na dendrites by regulating homogeneous Na⁺ distribution, which relies on molecular-level coordination between Na⁺ and the sodiophilic functional groups. By exploiting the porosity-gradient Janus structure, we have demonstrated that regular porosity and well-defined morphology of polymer electrolytes, particularly at the Na/electrolyte interface, significantly impact dendrite growth. This study provides new insights into the rational design of Na dendrite-suppressing polymer electrolytes, primarily focusing on the ion-regulating ability achieved by surface engineering.

Dual Structure-Material Design of Separators toward Dendrite-Free Lithium Metal Anodes

The practical applications of lithium metal anodes have been severely hindered by the Li dendrite issue. Herein, a dual structure-material design strategy was developed to fabricate a new type of separator using interconnected hollow porous polyacrylonitrile (PAN) nanofibers (HPPANF), which delivered controllable and dendrite-free Li depositions. The interconnected mesopores on HPPANF bridged the hollow interiors with the outside voids among the fibers, enabling outstanding electrolyte uptake capabilities for high ion conductivity, and nano-level wetted electrolyte/anode interface for uniform Li plating/stripping. In parallel, the HPPANF separator enriched with polar groups acted as an exceptional polymer-based solid-state electrolyte, providing 3D ion channels for the transport of Li ions. Benefiting from the dual structure-material design, the HPPANF separator induced uniform Li ion flux for dendrite-free Li depositions, which caused enhanced cycling stability (1300 h, 3 mA cm^-2 ). This work demonstrates a new method to stabilize Li metal anodes through rational separator design.

The Use of the Thiol-Ene Addition Click Reaction in the Chemistry of Organosilicon Compounds: An Alternative or a Supplement to the Classical Hydrosilylation?

This review presents the main achievements in the use of the thiol-ene reaction in the chemistry of silicones. Works are considered, starting from monomers and ending with materials.The main advantages and disadvantages of this reaction are demonstrated using various examples. A critical analysis of the use of this reaction is made in comparison with the hydrosilylation reaction.

Toward a Practical Zn Powder Anode: Ti3C2Tx MXene as a Lattice-Match Electrons/Ions Redistributor

The renaissance of aqueous Zn ion batteries has drawn intense attention to Zn metal anode issues, including dendrites growth, dead Zn, low efficiency, and other parasitic reactions. However, against the widely used 2D Zn foil, in fact, the Zn powder anode is a more practical choice for Zn-based batteries in industrial applications, but the related solutions are rarely investigated. Herein, we focus on the Zn powder anode and disclose its unknown failure mechanism different from Zn foils. By utilization of 2D flexible conductive Ti₃C₂Tx MXene flakes with hexagonal close-packed lattice as electrons and ions redistributor, a stable and highly reversible Zn powder anode without dendrite growth and low polarization is constructed. Low lattice mismatch (∼10%) enables a coherent heterogeneous interface between the (0002) plane of deposited Zn and (0002) plane of the Ti₃C₂Tx MXene. Thus, the Zn²⁺ ions are induced to undergo rapid uniform nucleation and sustained reversible stripping/plating with low energy barriers via the internally bridged shuttle channels. Paired with cyano group iron hexacyanoferrate (FeHCF) cathode, the FeHCF//MXene@Zn full battery delivers superior cycle durability and rate capability, whose service life with a CE of near 100% touches 850% of bare Zn powder counterparts. The proposed Ti₃C₂Tx MXene redistributor strategy concerning high-speed electrons/ions channel, low-barrier heterogeneous interface, is expected to be widely applied to other alkali metal anodes.

Porous Polyamide Skeleton-Reinforced Solid-State Electrolyte: Enhanced Flexibility, Safety, and Electrochemical Performance

The growing demand for safer lithium-ion batteries draws researchers' attention to solid-state electrolytes. In general, a desired electrolyte should be flexible, mechanically strong, and with high ionic conductivity. A solid-state electrolyte with a polymer as a matrix seems to be able to meet these demands. However, a pure polymer electrolyte lacks sufficient strength to suppress Li dendrites, and hybrids with ceramic components often lead to poor flexibility, both far from satisfactory. Herein, a solid-state electrolyte is designed by employing a mass-produced porous polyamide (PA) film infiltrated with polyethylene oxide (PEO)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). The PA/PEO/LiTFSI electrolyte is flexible but robust with a Young's modulus of up to 1030 MPa, ensuring steady Li//Li cycling without short circuit for more than 400 h. Also, the porous structure of the PA film decreases the crystalline regions and effectively enhances the ionic conductivity (2.05 × 10^-4 S cm^-1 at 30 °C). When cycled at 1C, solid-state LiFePO₄//Li batteries assembled with the PA/PEO/LiTFSI electrolyte retain 82% capacity after 300 cycles (60 °C). In addition, a flexible LiFePO₄//PA/PEO/LiTFSI//Li pouch cell can also work well in harsh operating environments, such as being folded, crimped, and pierced.

Sustainable Lignin-Derived Cross-Linked Graft Polymers as Electrolyte and Binder Materials for Lithium Metal Batteries

This study concerns the development of a well-defined synthetic route to obtain lignin-derived multifunctional graft polymers by simple chemical modification and atom-transfer radical polymerization. By grafting ion-conducting and cross-linkable moieties onto the lignin, star-shaped functional polymers are prepared. Upon cross-linking under ultraviolet light irradiation, the resulting polymer network exhibits mechanical stability even at high temperature, whereas the chain mobility is maintained despite the cross-linked structure. Their use as solid polymer electrolytes (SPEs) and binders for all-solid-state lithium metal batteries (LMBs) is also evaluated. The lignin-derived graft polymers provide a facile ion conduction pathway and also efficiently suppress lithium dendrite growth during cycling, thereby attaining excellent cycling performance for the LMB cell compared to that with a conventional liquid electrolyte-Celgard system.

The synergistic effect of the PEO–PVA–PESf composite polymer electrolyte for all-solid-state lithium-ion batteries

PVA and PESf have synergistic effects for CPE, resulting in a wider electrochemical window, higher ionic conductivity and better cyclic performance.

Facile fabrication of a hybrid polymer electrolyte via initiator-free thiol–ene photopolymerization for high-performance all-solid-state lithium metal batteries

The article reports the facile fabrication of a solid polymer electrolyte via initiator-free thiol–ene photopolymerization for all-solid-state lithium metal batteries.

Key Aspects of Lithium Metal Anodes for Lithium Metal Batteries

Rechargeable batteries are considered promising replacements for environmentally hazardous fossil fuel-based energy technologies. High-energy lithium-metal batteries have received tremendous attention for use in portable electronic devices and electric vehicles. However, the low Coulombic efficiency, short life cycle, huge volume expansion, uncontrolled dendrite growth, and endless interfacial reactions of the metallic lithium anode are major obstacles in their commercialization. Extensive research efforts have been devoted to address these issues and significant progress has been made by tuning electrolyte chemistry, designing electrode frameworks, discovering nanotechnology-based solutions, etc. This Review aims to provide a conceptual understanding of the current issues involved in using a lithium metal anode and to unveil its electrochemistry. The most recent advancements in lithium metal battery technology are outlined and suggestions for future research to develop a safe and stable lithium anode are presented.

High-Performance All-Solid-State Polymer Electrolyte with Controllable Conductivity Pathway Formed by Self-Assembly of Reactive Discogen and Immobilized via a Facile Photopolymerization for a Lithium-Ion Battery

All-solid-state polymer electrolytes (SPEs) have aroused great interests as one of the most promising alternatives for liquid electrolyte in the next-generation high-safety, and flexible lithium-ion batteries. However, some disadvantages of SPEs such as inefficient ion transmission capacity and poor interface stability result in unsatisfactory cyclic performance of the assembled batteries. Especially, the solid cell is hard to be run at room temperature. Herein, a novel and flexible discotic liquid-crystal (DLC)-based cross-linked solid polymer electrolyte (DLCCSPE) with controlled ion-conducting channels is fabricated via a one-pot photopolymerization of oriented reactive discogen, poly(ethylene glycol)diacrylate, and lithium salt. The experimental results indicate that the macroscopic alignment of self-assembled columns in the DLCCSPEs is successfully obtained under annealing and effectively immobilized via the UV photopolymerization. Because of the existence of unique oriented structure in the electrolytes, the prepared DLCCSPE films exhibit higher ionic conductivities and better comprehensive electrochemical properties than the DLCCSPEs without controlled ion-conductive pathways. Especially, the assembled LiFePO₄/Li cells with oriented electrolyte show an initial discharge capacity of 164 mA h g^-1 at 0.1 C and average specific discharge capacities of 143, 135, and 149 mA h g^-1 at the C-rates of 0.5, 1, and 0.2 C, respectively. In addition, the solid cell also shows the first discharge capacity of 124 mA h g^-1 (0.2 C) at room temperature. The outstanding cell performance of the oriented DLCCSPE should be originated from the macroscopically oriented and self-assembled DLC, which can form ion-conducting channels. Thus, combining the excellent performance of DLCCSPE and the simple one-pot fabricating process of the DLC-based all-solid-state electrolyte, it is believed that the DLC-based electrolyte can be one of the most promising electrolyte materials for the next-generation high-safety solid lithium-ion batteries.

Quasi-Solid-State Rechargeable Li-O2 Batteries with High Safety and Long Cycle Life at Room Temperature

As interest in electric vehicles and mass energy storage systems continues to grow, Li-O₂ batteries are attracting much attention as a candidate for next-generation energy storage systems owing to their high energy density. However, safety problems related to the use of lithium metal anodes have hampered the commercialization of Li-O₂ batteries. Herein, we introduced a quasi-solid polymer electrolyte with excellent electrochemical, chemical, and thermal stabilities into Li-O₂ batteries. The ion-conducting QSPE was prepared by gelling a polymer network matrix consisting of poly(ethylene glycol) methyl ether methacrylate, methacrylated tannic acid, lithium trifluoromethanesulfonate, and nanofumed silica with a small amount of liquid electrolyte. The quasi-solid-state Li-O₂ cell consisted of a lithium powder anode, a quasi-solid polymer electrolyte, and a Pd₃Co/multiwalled carbon nanotube cathode, which enhanced the electrochemical performance of the cell. This cell, which exhibited improved safety owing to the suppression of lithium dendrite growth, achieved a lifetime of 125 cycles at room temperature. These results show that the introduction of a quasi-solid electrolyte is a potentially new alternative for the commercialization of solid-state Li-O₂ batteries.

High Ion-Conducting Solid-State Composite Electrolytes with Carbon Quantum Dot Nanofillers

Solid-state polymer electrolytes (SPEs) with high ionic conductivity are desirable for next generation lithium- and sodium-ion batteries with enhanced safety and energy density. Nanoscale fillers such as alumina, silica, and titania nanoparticles are known to improve the ionic conduction of SPEs and the conductivity enhancement is more favorable for nanofillers with a smaller size. However, aggregation of nanoscale fillers in SPEs limits particle size reduction and, in turn, hinders ionic conductivity improvement. Here, a novel poly(ethylene oxide) (PEO)-based nanocomposite polymer electrolyte (NPE) is exploited with carbon quantum dots (CQDs) that are enriched with oxygen-containing functional groups. Well-dispersed, 2.0-3.0 nm diameter CQDs offer numerous Lewis acid sites that effectively increase the dissociation degree of lithium and sodium salts, adsorption of anions, and the amorphicity of the PEO matrix. Thus, the PEO/CQDs-Li electrolyte exhibits an exceptionally high ionic conductivity of 1.39 × 10-4 S cm-1 and a high lithium transference number of 0.48. In addition, the PEO/CQDs-Na electrolyte has ionic conductivity and sodium ion transference number values of 7.17 × 10-5 S cm-1 and 0.42, respectively. It is further showed that all solid-state lithium/sodium rechargeable batteries assembled with PEO/CQDs NPEs display excellent rate performance and cycling stability.