Complete Depolymerization and Repolymerization of a Sugar Poly(orthoester)

Insulative Biobased Glaze from Wood Laminates Obtained by Self-Adhesion

The combination of optical transparency and mechanical strength is a highly desirable attribute of wood-based glazing materials. However, such properties are typically obtained by impregnation of the highly anisotropic wood with index-matching fossil-based polymers. In addition, the presence of hydrophilic cellulose leads to a limited water resistance. Herein, this work reports on an adhesive-free lamination that uses oxidation and densification to produce transparent all-biobased glazes. The latter are produced from multilayered structures, free of adhesives or filling polymers, simultaneously displaying high optical clarity and mechanical strength, in both dry and wet conditions. Specifically, high values of optical transmittance (≈85.4%), clarity (≈20% with low haze) at a thickness of ≈0.3 mm, and highly isotropic mechanical strength and water resistance (wet strength of ≈128.25 MPa) are obtained for insulative glazes exhibiting low thermal conductivity (0.27 W m-1 K-1 , almost four times lower than glass). The proposed strategy results in materials that are systematically tested, with the leading effects of self-adhesion induced by oxidation rationalized by ab initio molecular dynamics simulation. Overall, this work demonstrates wood-derived materials as promising solutions for energy-efficient and sustainable glazing applications.

Radiation-induced curcumin release from curcumin–chitosan polymer films

The probability of human exposure to damaging radiation is increased in activities associated with long-term space flight, medical radiation therapies, and responses to nuclear accidents. However, the development of responsive countermeasures to combat radiation damage to biological tissue is lagging behind rates of human exposure. Herein, we report a radiation-responsive drug delivery system that releases doses of curcumin from a chitosan polymer/film in response to low level gamma radiation exposure. As a fibrous chitosan–curcumin polymer, 1 Gy gamma irradiation (¹³⁷Cs) released 5 ± 1% of conjugated curcumin, while 6 Gy exposure releases 98 ± 1% of conjugated curcumin. The same polymer was formed into a film through solvent casting. The films showed similar, albeit attenuated behavior in water (100% released) and isopropyl alcohol (32% released) with statistically significant drug release following 2 Gy irradiation. ATR FT-IR studies confirmed glycosidic bond cleavage in the chitosan–curcumin polymer in response to gamma radiation exposure. Similar behavior was noted upon exposure of the polymer to 20 cGy (1 GeV amu⁻¹, at 20 cGy min⁻¹) high linear energy transfer (LET) ⁵⁶Fe radiation based on FTIR studies. Density Functional Theory calculations indicate homolytic bond scission as the primary mechanism for polymer disintegration upon radiation exposure. Films did not change in thickness during the course of radiation exposure. The successful demonstration of radiation-triggered drug release may lead to new classes of radio-protective platforms for developing countermeasures to biological damage from ionizing radiation.

The probability of human exposure to damaging radiation is increased in activities associated with long-term space flight, medical radiation therapies, and responses to nuclear accidents.

Realizing High-Performance Li-Polysulfide Full Cells by using a Lithium Bis(trifluoromethanesulfonyl)imide Salt Electrolyte for Stable Cyclability

Since concentrated electrolytes have attracted great attention for the stabilization of lithium-metal anodes for lithium-ion batteries, the demonstration of a full cell with an electrolyte concentration study has become a research topic of interest. Herein, we have demonstrated a proof of concept, a lithium-polysulfide full cell battery using various lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) electrolyte concentrations with glass-fiber-based composite and hard carbon as the cathode and anode, respectively. The initial capacity of the lithium-polysulfide full cell is found to be 970 mA h g^-1 at 0.1 C. The capacity is stabilized at 870 mA h g^-1 after 100 cycles with a capacity retention of 88.6 %. An excellent capacity retention of ≈80 % is achieved after long 800 cycles at 0.5 C by using full cell technology. Further, our post-mortem analysis sheds light on the difference in SEI layer formation on hard carbon anodes with changing electrolyte concentration, thereby indicating reasons for the obtainment of a high cyclic performance with 1 m LiTFSI salt electrolyte. The successful demonstration of the long cyclic performance of Li-polysulfide full cells is indeed a step towards producing high performance Li-polysulfide full cell batteries with long cycling using conventional LiTFSI salt electrolyte and commercial anode materials.