Bismuth-Based Photocatalysts for Solar Photocatalytic Carbon Dioxide Conversion

Sample Fabrication of BiOCl Nanosheets with Low Specific Surface Area for Efficient Photocatalytic Degradation of Organic Wastewater

BiOCl photocatalyst with excellent performance has been prepared by a simple liquid-solid phase transition method. Three BiOCl-x (x = 0.5, 0.75, 1.0) photocatalysts were obtained by changing the amount of HCl in the preparation process. The main dominant crystal planes are (001), (002), and (003). Their forbidden bandwidths are reduced to 2.81, 2.89, and 2.84 eV. The samples were characterized by X-ray diffractometer, high-resolution field emission scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier infrared spectrometry, UV-vis diffuse reflection spectrometer, and UV-vis spectrophotometer. The degradation mechanism of BiOCl-x on Rhodamine B(RhB) has been investigated by quenching experiments on active materials. ·O2- was the primary degradation agent. When the dosage of HCl was 0.75 mL, the degradation effect of RhB was the best under the same experimental conditions. In visible light, RhB was almost completely degraded within 15 min, demonstrating an excellent photocatalytic degradation efficiency.

M/BiOCl-(M = Pt, Pd, and Au) Boosted Selective Photocatalytic CO2 Reduction to C2 Hydrocarbons via *CHO Intermediate Manipulation

Selective CO2 photoreduction to C2 hydrocarbons is significant but limited by the inadequate adsorption strength of the reaction intermediates and low efficiency of proton transfer. Herein, an ameliorative *CO adsorption and H2O activation strategy is realized via decorating bismuth oxychloride (BiOCl) nanostructures with different metal (Pt, Pd, and Au) species. Experimental and theoretical calculation results reveal that distinct *CO binding energies and *H acquisition abilities of the metal cocatalysts mediate the CO2 reduction activity and hydrocarbon selectivity. The relatively moderate *CO adsorption and *H supply over Pd/BiOCl endows it with the lowest free energy to generate *CHO, leading to its highest activity of hydrocarbon production. Specifically, the Pt cocatalyst can efficiently participate in H2O dissociation to deliver more *H for facilitating the protonation of the *CHO and *CHOH, thereby favoring CH4 production with 76.51% selectivity. A lower *H supply over Pd/BiOCl and Au/BiOCl results in a large energy barrier for *CHO or *CHOH protonation and thus a more thermodynamically favored OC─CHO coupling pathway, which endows them with vastly increased C2 hydrocarbon selectivity of 81.21% and 92.81%, respectively. The understanding of efficient C2 hydrocarbon production in this study sheds light on how materials can be engineered for photocatalytic CO2 reduction.

WO3/BiOBr S-Scheme Heterojunction Photocatalyst for Enhanced Photocatalytic CO2 Reduction

The photocatalytic CO2 reduction strategy driven by visible light is a practical way to solve the energy crisis. However, limited by the fast recombination of photogenerated electrons and holes in photocatalysts, photocatalytic efficiency is still low. Herein, a WO3/BiOBr S-scheme heterojunction was formed by combining WO3 with BiOBr, which facilitated the transfer and separation of photoinduced electrons and holes and enhanced the photocatalytic CO2 reaction. The optimized WO3/BiOBr heterostructures exhibited best activity for photocatalytic CO2 reduction without any sacrificial reagents, and the CO yield reached 17.14 μmol g-1 after reaction for 4 h, which was 1.56 times greater than that of BiOBr. The photocatalytic stability of WO3/BiOBr was also improved.

Review on synthetic approaches and PEC activity performance of bismuth binary and mixed-anion compounds for potential applications in marine engineering

Photoelectrochemical (PEC) technology in marine engineering holds significant importance due to its potential to address various challenges in the marine environment. Currently, PEC-type applications in marine engineering offer numerous benefits, including sustainable energy generation, water desalination and treatment, photodetection, and communication. Finding novel efficient photoresponse semiconductors is of great significance for the development of PEC-type techniques in the marine space. Bismuth-based semiconductor materials possess suitable and tunable bandgap structures, high carrier mobility, low toxicity, and strong oxidation capacity, which gives them great potential for PEC-type applications in marine engineering. In this paper, the structure and properties of bismuth binary and mixed-anion semiconductors have been reviewed. Meanwhile, the recent progress and synthetic approaches were discussed from the point of view of the application prospects. Finally, the issues and challenges of bismuth binary and mixed-anion semiconductors in PEC-type photodetection and hydrogen generation are analyzed. Thus, this perspective will not only stimulate the further investigation and application of bismuth binary and mixed-anion semiconductors in marine engineering but also help related practitioners understand the recent progress and potential applications of bismuth binary and mixed-anion compounds.

NiCS3: A cocatalyst surpassing Pt for photocatalytic hydrogen production

Cocatalysts play a key role in improving photocatalytic performance by enhancing conductivity and providing an enormous number of active sites simultaneously. However, cocatalysts are usually made of noble metals such as Pt, which are expensive and rare. Therefore, cocatalysts derived from cheap and abundant elements are highly desirable. Here, for the first time, we demonstrate that NiCS3, which is made from nickel that is abundant and costs less than 0.04 % of Pt, is an effective substitute for Pt cocatalysts for the photocatalytic activity of CdS nanorods in hydrogen evolution reaction (HER). Under visible light, the NiCS3/CdS composite with NiCS3 as the cocatalyst achieved an astonishing H2 production of 61.9 mmol·g-1·h-1 while maintaining high stability, which is 14 times higher than that observed when using CdS alone and nearly 2 times higher than that of Pt/CdS. We also established that the metallicity of NiCS3 results in good carrier conductivity, which promotes the electron transfer and the separation of photo-induced carriers. Due to the appropriate adsorption energy ΔGH*, NiCS3 more readily adsorbs hydrogen protons and desorbs molecular hydrogen during the photocatalytic process compared with Pt. Additionally, NiCS3 can effectively inhibit the photo-corrosion effect of CdS itself, ensuring a good stability of HER. These results suggest that NiCS3 is a promising substitute for Pt cocatalysts.

Potential application of bismuth oxyiodide (BiOI) when it meets light

Bismuth oxyiodide (BiOI) is a kind of typical two-dimensional (2D) material that has been increasingly developed alongside other 2D materials such as graphene, MXenes, and transition-metal dichalcogenide. However, its potential applications have not been widely whispered compared to those of other 2D materials. Using its distinctive properties, BiOI can be used for various applications, especially when it meets sunlight and other light-related electromagnetic waves. In this present review, we discuss the developments of BiOI and challenges in the applications for photodetector and light-assisted sensors, photovoltaic devices, optoelectronic logic devices, as well as photocatalysts. We start the discussion with a basic understanding and development of BiOI, crystal structure, and its properties. The synthesis and further development, such as green synthesis and its challenges in the synthesis-suited industry, as well as device integration, are also explained together with a plausible strategy to enhance the feasibility of BiOI for those various applications. We believe that the provided discussion and perspectives will not only promote BiOI to be one of the highly considered 2D materials but can also assist recent graduates in any materials science discipline and inform the senior scientists and industrial-based stakeholders of the latest advances in bismuth oxide and mixed-anion compounds.

A novel Sillén-structured Bi-based oxybromide: CdBiO2Br ultrathin nanosheets for enhanced photocatalytic activity

According to the typical Sillén-structured BiOBr, a simple solvothermal method was used to successfully synthesise Sillén-structured bimetallic oxyhalide CdBiO2Br with the existence of 1-hexadecyl-3-methylimidazolium bromide ([C16mim]Br), a kind of reactive ionic liquid. The introduction of the metal cadmium, which can form Sillén-structured bimetallic oxyhalide, made the alternating structure of BiOBr originally [Bi2O2]2+ and bilayer Br- modified to that of [CdBiO2]+ and monolayer Br-. So that the distance between layer and layer is greatly shortened, which facilitates the migration and separation of photogenerated carriers and promotes the generation of more reactive oxygen species. After modification, the band positions of CdBiO2Br materials can make more full use of visible light and more favourable utilisation of solar resources. As confirmed by radical trapping analysis and ESR analysis, superoxide radical (·O2-) and hole (h+) acted the major part during photocatalysis. The possible intermediate products that appeared during the degradation progress were analyzed by LC-MS. Moreover, the generation of superoxide ions was quantitatively analyzed by nitroblue tetrazolium chloride (NBT). In this paper, we present an ultra-thin layered material for visible light catalysis, which enlightens a feasible scheme for the research and development of new layered photocatalytic materials.

Unlock the Visible-Light Photocatalytic OWS by Surface Disorder-Engineered Bi-Based Composite Oxides through Phosphorization

It has been proven that the introduction of disorder in the surface layers can narrow the energy band gap of semiconductors. Disordering the surface's atomic arrangement is primarily achieved through hydrogenation reduction. In this work, we propose a new approach to achieve visible-light absorption through surface phosphorization, simultaneously raising the energy band structure. In particular, the surface phosphorization of BixY1-xVO4 was successfully prepared by annealing them with a small amount of NaH2PO2 under a N2 atmosphere. After this treatment, the obtained BixY1-xVO4 showed distinct absorption in visible light. The surface phosphorization treatment not only improves the photocatalytic activity of BixY1-xVO4 but also enables visible-light photocatalytic overall water splitting. Furthermore, we demonstrate that this surface phosphorization method is universal for Bi-based composite oxides.

Visible light and iodate/iodide mediated degradation of bisphenol A by self-assembly 3D hierarchical BiOIO3/Bi5O7I Z-scheme heterojunction: Intermediates identification, radical mechanism and DFT calculation

Broadening the light absorption and inhibiting carrier's recombination are vital to the improvement of photocatalytic performance. Herein, self-assembly 3D hierarchical microsphere BiOIO₃/Bi₅O₇I Z-scheme heterojunction with carrier transfer channel was firstly fabricated by in-situ solvothermal method. The degradation efficiency for bisphenol A (BPA) reached 98.9 % within 60 min visible light irradiation. The enhanced photocatalytic activity was benefited from the Z-scheme system assisted by iodate/iodide (IO₃^-/I^-) as carrier transfer channel that not only accelerated the interfacial charge separation, but also provided massive reactive centers for obtaining high redox capacity. The vulnerable sites and the degradation pathways of BPA were identified by density functional theory calculations and liquid chromatography-mass spectrometry analyses. The toxicity of BPA and its intermediates were predicted by ECOlogical Structure Activity Relationship (ECOSAR) and the results demonstrated that BPA was eventually mineralized to harmless products. The Z-scheme charge transfer mechanism was deeply elucidated based on the role of active species (·O₂^-, ·OH and h⁺), band structure and carrier separation efficiency. This study provides a promising strategy for the photoactivity enhancement of bismuth based heterojunction in environment purification.

Triclinic-Phase Bismuth Chromate: A Promising Candidate for Photocatalytic Water Splitting with Broad Spectrum Ranges

Photocatalytic water splitting for solar energy conversion remains challenged by the lack of novel semiconductor photocatalysts with paramount parameters including wide light-harvesting ranges and suitable band structures. Here, a novel triclinic-phase bismuth chromate (Bi₂ CrO₆ ) acting as a semiconductor photocatalyst candidate is reported. Triclinic Bi₂ CrO₆ exhibits a broad absorption range of ≈650 nm with a direct bandgap of 1.86 eV and shows a suitable band structure for water splitting. Theoretical simulations of triclinic Bi₂ CrO₆ reveal a high charge mobility, possibly owing to the strong hybridized covalent bonds, large elastic modulus, and small carrier effective mass. The triclinic Bi₂ CrO₆ is demonstrated to work well toward photocatalytic water oxidation and hydrogen production reactions under visible light and match well with its absorption ranges. In particular, it exhibits decent photocatalytic water oxidation performance in the presence of various electron scavengers. Furthermore, the visible-light-driven Z-scheme overall water splitting system is fabricated by coupling triclinic Bi₂ CrO₆ as the oxygen evolution photocatalyst with SrTiO₃ :Rh as the hydrogen evolution photocatalyst, giving a stable overall water splitting with stoichiometric evolution of H₂ and O₂ . This work presents a promising semiconductor material enabling wide-range light harvesting for photocatalytic and photo-electrochemical solar energy conversion.

Recent Development Strategies for Bismuth-Driven Materials in Sustainable Energy Systems and Environmental Restoration

Bismuth(Bi)-based materials have gained considerable attention in recent decades for use in a diverse range of sustainable energy and environmental applications due to their low toxicity and eco-friendliness. Bi materials are widely employed in electrochemical energy storage and conversion devices, exhibiting excellent catalytic and non-catalytic performance, as well as CO₂ /N₂ reduction and water treatment systems. A variety of Bi materials, including its oxides, chalcogenides, oxyhalides, bismuthates, and other composites, have been developed for understanding their physicochemical properties. In this review, a comprehensive overview of the properties of individual Bi material systems and their use in a range of applications is provided. This review highlights the implementation of novel strategies to modify Bi materials based on morphological and facet control, doping/defect inclusion, and composite/heterojunction formation. The factors affecting the development of different classes of Bi materials and how their control differs between individual Bi compounds are also described. In particular, the development process for these material systems, their mass production, and related challenges are considered. Thus, the key components in Bi compounds are compared in terms of their properties, design, and applications. Finally, the future potential and challenges associated with Bi complexes are presented as a pathway for new innovations.

Bismuth-Based Multi-Component Heterostructured Nanocatalysts for Hydrogen Generation

Developing a unique catalytic system with enhanced activity is the topmost priority in the science of H2 energy to reduce costs in large-scale applications, such as automobiles and domestic sectors. Researchers are striving to design an effective catalytic system capable of significantly accelerating H2 production efficiency through green pathways, such as photochemical, electrochemical, and photoelectrochemical routes. Bi-based nanocatalysts are relatively cost-effective and environmentally benign materials which possess advanced optoelectronic properties. However, these nanocatalysts suffer back recombination reactions during photochemical and photoelectrochemical operations which impede their catalytic efficiency. However, heterojunction formation allows the separation of electron–hole pairs to avoid recombination via interfacial charge transfer. Thus, synergetic effects between the Bi-based heterostructured nanocatalysts largely improves the course of H2 generation. Here, we propose the systematic review of Bi-based heterostructured nanocatalysts, highlighting an in-depth discussion of various exceptional heterostructures, such as TiO2/BiWO6, BiWO6/Bi2S3, Bi2WO6/BiVO4, Bi2O3/Bi2WO6, ZnIn2S4/BiVO4, Bi2O3/Bi2MoO6, etc. The reviewed heterostructures exhibit excellent H2 evolution efficiency, ascribed to their higher stability, more exposed active sites, controlled morphology, and remarkable band-gap tunability. We adopted a slightly different approach for reviewing Bi-based heterostructures, compiling them according to their applicability in H2 energy and discussing challenges, prospects, and guidance to develop better and more efficient nanocatalytic systems.

Synergy of MoO2 with Pt as Unilateral Dual Cocatalyst for Improving Photocatalytic Hydrogen Evolution over g-C3 N4

Pt is usually used as cocatalyst for g-C₃ N₄ to produce H₂ by photocatalytic splitting of water. However, the photocatalytic performance is still limited by the fast recombination of photo-generated electrons and holes, as well as the poor absorption of visible light. In this work, MoO₂ /g-C₃ N₄ composites were prepared, in which MoO₂ synergetic with Pt photo-deposited during H₂ evolution reaction worked as unilateral dual cocatalyst to improve the photocatalytic activity. Within 4 hours of irradiation, the hydrogen production rate of MoO₂ -Pt dual cocatalyst modified g-C₃ N₄ reached 3804.89 μmol/g/h, which was 120.18 times of that of pure g-C₃ N₄ (GCN, 31.66 μmol/g/h), 10.98 times of that of MoO₂ modified g-C₃ N₄ (346.39 μmol/g/h), and 9.18 times of that of Pt modified g-C₃ N₄ (413.64 μmol/g/h). Characterization results demonstrate that the deficient MoO₂ not only promoted visible light absorption of g-C₃ N₄ , but also worked as a "electron pool" to capture and transfer electrons to Pt.

Enhanced visible-light driven photocatalytic degradation of bisphenol A by tuning electronic structure of Bi/BiOBr

Visible-light (VL) photocatalysis has been regarded as an intriguing technology for the control of persistent environmental pollutants. In this study, the novel homogeneous Co doped-Bi/BiOBr nanocomposites (CB-X) were prepared via a facile one-step hydrothermal method, featured with a uniform 0D Bi nanodots distribution on 2D Co-doped BiOBr nanosheets, and the photocatalytic performance was evaluated by decomposing the BPA as a prototype contaminant. The degradation experiment indicated that the optimal CB-2 nanocomposite exhibited the best photocatalytic activity with a 94% removal efficiency of BPA under the VL irradiation of 30 min; And the corresponding apparent rate constant (k) was as high as 0.107 min^-1, which was 10.7 times greater than that of Bi/BiOBr (0.010 min^-1). Benefiting from the modulation effect of Co-doping on the intrinsic electron configuration of Bi/BiOBr, the elevated VL adsorption capacity and accelerated h⁺/e^- pairs separation rate were achieved, which were evidenced by photoluminescence (PL) spectroscopy, photo-electrochemical measurements and density functional theory (DFT) calculation. Moreover, the major reactive species in CB-X/VL system were uncovered to be ^•O₂^- and ¹O₂, whereas ^•OH and h⁺ presented a secondary contribution in the BPA elimination. Finally, the possible photocatalytic mechanism involved in CB-X nanocomposites and BPA degradation pathways were proposed on the basis of the various intermediates and products detected by LC-MS/MS.

Structural Distortion of g-C3N4 Induced by N-Defects for Enhanced Photocatalytic Hydrogen Evolution

Hydrogen evolution by photocatalytic technology has been one of the most promising and attractive solutions, and can harvest and convert the abundant solar energy into green, renewable hydrogen energy. As a new kind of photocatalytic material, graphitic carbon nitride (g-C3N4) has drawn much attention in photocataluytic H2 production due to its visible light response, ease of preparation and good stability. For a higher photocatalyic performance, N defects were introduced in to the traditional g-C3N4 in this work. The existence of N defects was proved by adequate material characterization. Significantly, a new absorption region at around 500 nm of N-deficient g-C3N4 appeared, revealing the exciting n-π* transition of lone pair electrons. The photocatalytic H2 production performance of N-deficient g-C3N4 was increased by 5.8 times. The enhanced photocatalytic performance of N-deficient g-C3N4 was attributed to the enhanced visible light absorption, as well as the promoted separation of photo-generated carries and increased specific surface area.

Recent review of BixMOy (M=V, Mo, W) for photocatalytic CO2 reduction into solar fuels

The utilization of solar energy for CO₂ conversion not only enables a green and low-carbon recycling of CO₂ with renewable energy, but also solves ecological problems. Bi_xMO_y (M = V, Mo, W) materials have typical layered structures and unique electronic properties that provide suitable band gaps and potential to meet the basic conditions for CO₂ reduction. However, pristine Bi_xMO_y faces with problems such as small specific surface area, insufficient active sites, low charge carriers' separation and utilization efficiency. This review comprehensively described the basic principles and reaction pathways of photocatalytic CO₂ reduction, and further presented the research progress of Bi_xMO_y catalysts in CO₂ conversion reactions. In this perspective, we further focus on the design concepts and modification strategies to improve the photocatalytic CO₂ reduction activity of Bi_xMO_y, such as morphology control, constructing surface vacancies and heterojunction fabrication. Finally, based on representative researches, the present review will be expected to provide updated information and insights for developing advanced Bi_xMO_y materials to further improve CO₂ reduction activity and selectivity.

Anti-oil-fouling Au/BiOCl coating for visible light-driven photocatalytic inactivation of bacteria

In this work, gold/bismuth oxychloride (Au/BiOCl) nanocomposites with different morphologies were successfully prepared by simple solvothermal method and sodium borohydride reduction method, which exhibited significantly efficient visible-light-driven photocatalytic disinfection for Staphylococcus aureus (S.aureus). Particularly, the flower-like Au/BiOCl nanocomposite showed the highest photocatalytic bactericidal performance among the prepared Au/BiOCl samples. The radical trapping experiments revealed that the hole was the main reactive species responsible for the inactivation of S.aureus over Au/BiOCl composite. The enhanced photocatalytic bactericidal effect could be attributed to the enhanced adsorption intensity of visible light that originated from the surface plasmon resonance (SPR) effect of Au, rapid transfer and space transport of hot electrons caused by the hierarchical structure of BiOCl layered compound. Furthermore, the Au/BiOCl coating prepared on stainless steel wire mesh via in-situ synthesis method exhibited excellent superhydrophilic/underwater superoleophobic performance, which endowed the coating with anti-oil-fouling in water. More importantly, compared with Au/BiOCl powder catalyst, the prepared Au/BiOCl coating with anti-oil-fouling also possessed high photocatalytic bactericidal activity and stable recycling performance.

Bi-based photocatalysts for bacterial inactivation in water: Inactivation mechanisms, challenges, and strategies to improve the photocatalytic activity

Bi-based photocatalysts have been considered suitable materials for water disinfection under natural solar light due to their outstanding optical and electronic properties. However, until now, there are not extensive reviews about the development of Bi-based materials and their application in bacterial inactivation in aqueous solutions. For this reason, this work has focused on summarizing the state of the art related to the inactivation of Gram- and Gram + pathogenic bacteria under visible light irradiation using different Bi-based micro and nano structures. In this sense, the photocatalytic bacterial inactivation mechanisms are analyzed, considering several modifications. The factors that can affect the photocatalytic performance of these materials in real conditions and at a large scale (e.g., water characteristics, pH, light intensity, photocatalyst dosage, and bacteria level) have been studied. Furthermore, current alternatives for improving the photocatalytic antibacterial activity and reuse of Bi-based materials (e.g., surface engineering, crystal facet engineering, doping, noble metal coupling, heterojunctions, Z-scheme junctions, coupling with graphene derivatives, magnetic composites, immobilization) have been explored. According to several reports, inactivation rate values higher than 90% can be achieved by using the modified Bi-based micro/nano structures, which become them excellent candidates for photocatalytic water disinfection. However, these innovative photocatalytic materials bring a variety of future difficulties and opportunities in water disinfection.

Effects of nitrogen/bismuth-doping on the photocatalyst composite of carbon dots/titanium dioxide nanoparticles (CDs/TNP) for enhanced visible light-driven removal of diclofenac

The present work demonstrates the coupling of titanium dioxide, TiO₂ nanoparticles (TNP) with N-doped, Bi-doped, and N-Bi co-doped rice husk-derived carbon dots (CDs) via a facile dispersion method, forming respective photocatalyst composites of CDs/TNP, N-CDs/TNP, Bi-CDs/TNP and N-Bi-CDs/TNP. Characterization analyzes verified the successful incorporation of respective CDs samples into TNP, forming photocatalyst composite with narrowed band gap and quenched photoluminescence intensity. Photocatalytic activity of TNP and the respective composites was investigated for photodegradation of diclofenac (DCF) under both simulated sunlight and natural sunlight irradiation. The as-prepared N-Bi-CDs/TNP composite showed the best photocatalytic performance among all composites, able to completely degrade 5 ppm of DCF within 60 min and 180 min under both types of visible light irradiation, respectively. The N-Bi-CDs/TNP composite also showed a TOC removal efficiency up to 87.63%. N-Bi-CDs, worked as photosensitizer and electron reservoir, contributed to the outstanding photocatalytic activity of N-Bi-CDs/TNP, whereby the recombination was prolonged and light absorption was shifted towards the visible light region. Furthermore, the composite of N-Bi-CDs/TNP also demonstrated good stability and reusability over repeated degradation cycles. The photodegradation of DCF resulted into several intermediates, which were identified from LC-MS analysis. The present work could provide an insight on the application of heteroatoms doped and co-doped carbon dots in semiconductor oxide as high performance photocatalysts.

Anchoring bismuth oxybromo-iodide solid solutions on flexible electrospun polyacrylonitrile nanofiber mats for floating photocatalysis

Constructing floating photocatalysts with highly efficient visible-light utilization is a promising approach for practical photocatalytic wastewater treatment. In this study, we anchored bismuth oxybromo-iodide (BiOBr_xI_1-x (0 ≤ x ≤ 1)) on flexible electrospun polyacrylonitrile (PAN) nanofiber mats to create BiOBr_xI_1-x@PAN nanofibers with tunable light absorption properties as floating photocatalysts at room temperature. As x increased, the photocatalytic activity of the BiOBr_xI_1-x@PAN nanofibers with similar loading content initially increased, and then decreased, for the degradation of bisphenol A (BPA) and methyl orange (MO) under visible-light irradiation (λ > 420 nm) conditions. The BiOBr_xI_1-x@PAN (0 < x < 1) nanofibers exhibited better photocatalytic performance compared to the BiOBr@PAN and BiOI@PAN nanofibers. Under visible-light irradiation, the BPA degradation rate of the BiOBr_0.5I_0.5@PAN nanofibers was 1.9 times higher than that of the BiOI@PAN nanofibers, while the BiOBr@PAN nanofibers had no noticeable degradation performance. The MO degradation rate of the BiOBr_0.5I_0.5@PAN nanofibers was 2.5 and 3.2 times higher than that of the BiOBr@PAN and BiOI@PAN nanofibers, respectively. The enhanced performance possibly originated from a balance between the light absorption and redox capabilities, along with efficient separation of electron-hole pairs in the BiOBr_0.5I_0.5@PAN nanofibers, as determined by ultraviolet-visible diffuse reflectance spectroscopy, X-ray photoelectron spectra analysis of the valence bands, and photocurrent response characterization. Compared to the powder structures, the BiOBr_xI_1-x@PAN nanofibers showed enhanced performance due to the excellent dispersion and immobilization of the BiOBr_xI_1-x solid solution, which provided more active sites during photocatalytic degradation. In addition, their flexible self-supporting structures allowed for floating photocatalysis near the water surface. They could be reused directly without separation and maximized the absorption of visible light during the photocatalytic reaction. Therefore, these solid-solution-based floatable nanofiber photocatalysts are good potential candidates for wastewater treatment applications.

Bi nanosphere-decorated oxygen-vacancy BiOBr hollow microspheres with exposed (110) facets to enhance the photocatalytic performance for the degradation of azo dyes

A facile preparation strategy is proposed for a novel highly-active composite photocatalyst comprising Bi nanosphere-decorated oxygen-vacancy BiOBr hollow microspheres with exposed (110) facets for the efficient degradation of azo dyes.

Oxygen defects-induced charge transfer in Bi7O9I3 for enhancing oxygen activation and visible-light degradation of BPA

Two-dimensional (2D) bismuth-based semiconductors have aroused intensive concern owing to their prominent photocatalytic activity for organic pollutants removal. In this work, a facile strategy for introducing oxygen vacancy in Bi-based oxyiodides (Bi_xO_yI_z) sheet-like architectures to activate molecular oxygen was proposed. The structure, photoelectric properties and visible light (λ > 420 nm) induced photocatalytic activities of these samples for decomposition of bisphenol A (BPA) were systematically characterized and evaluated. The as-prepared Bi₇O₉I₃ with a feeding Bi/I molar ratio of 1:1 exhibited the best photocatalytic activity comparable to those of similarly synthesized Bi₇O₉I₃ with other molar ratios and BiOIO₃ catalysts. The optimal Bi₇O₉I₃ achieved excellent photocatalytic activity with 99.6 % degradation efficiency of BPA within 20 min and superior structural stability with 95.1 % degradation retention over 5 cycling tests. In addition, the resulting Bi₇O₉I₃ sample displayed a high mineralization efficiency of BPA. Importantly, the plenty of oxygen vacancies (V_os) exsiting in Bi₇O₉I₃ played the dominant role in both accelerating electron transfer and activating molecular oxygen to facilitate the generation of superoxide radical (O₂^·-) and singlet oxygen (¹O₂), thereby proceeding oxidative degradation of BPA molecules during photoreactions. The efforts and attempts are also extendable to synthesis other 2D photocatalysts, providing potential for effective charge-carrier separation and molecular oxygen activation.

Preparation and Application of Nb2O5 Nanofibers in CO2 Photoconversion

Increasing global warming due to NOx, CO2, and CH4, is significantly harming ecosystems and life worldwide. One promising methodology is converting pollutants into valuable chemicals via photocatalytic processes (by reusable photocatalysts). In this context, the present work aimed to produce a Nb2O5 photocatalyst nanofiber system by electrospinning to convert CO2. Based on the collected data, the calcination at 600 ∘C for 2 h resulted in the best condition to obtain nanofibers with homogeneous surfaces and an average diameter of 84 nm. As a result, the Nb2O5 nanofibers converted CO2 mostly into CO and CH4, reaching values around 8.5 μmol g−1 and 0.55 μmol g−1, respectively.

Bimetal (Fe/Zn) doped BiOI photocatalyst: An effective photodegradation of tetracycline and bacteria

Tetracycline (TC) is one of the most commonly used broad-spectrum antibiotics to treat the bacterial infection. TC antibiotics enter into the environment because of partial metabolism in the humans and animals, thereby increasing the environmental toxicity. Therefore, it is highly needed to treat TC antibiotics from the water system. In this aspect, the present work focus on the synthesis of Fe and Zn (bimetal) incorporated with different concentrations into the bismuth-oxy-iodide (Fe/Zn-BiOI) based photocatalyst materials. The synthesized Fe/Zn-BiOI was tested against photocatalytic degradation of TC antibiotics and bacteria. The band gap value of the synthesized Fe/Zn-BiOI was calculated ~2.19 eV. The incorporation of the Fe and Zn metals within the BiOI aided advantages that increased the reactive sites, oxygen defects, photon adsorption, production of hydroxyl radicals, and decrease the recombination rate, thereby high photo-degradation ability. The maximum degradation of ~83% was observed using Fe/Zn-BiOI-1-1 at 10 mg/L of TC antibiotics concentration. Moreover, ~98% of degradation was observed at pH~10 of the TC antibiotics. The photo-activity against bacteria of the Fe/Zn-BiOI was also determined. The data suggested that the synthesized Fe/Zn-BiOI based photocatalyst materials effectively inhibited the bacterial strains. Therefore, Fe/Zn-BiOI based photocatalyst materials might be promising materials that effectively degrade TC antibiotics as well as bacteria.

Highly Selective Production of Ethanol Over Hierarchical Bi@Bi2 MoO6 Composite via Bicarbonate-Assisted Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction is a sustainable and inexpensive method to solve the energy crisis and the greenhouse effect. However, the major stumbling blocks such as poor product selectivity, low yield of the multi-carbon products, and serious recombination of electron-hole pairs hinder practical application of photocatalysts. Herein, a high-performance Bi@Bi₂ MoO₆ photocatalyst, Bi nanoparticles grown on the surface of Bi₂ MoO₆ nanosheets with oxygen vacancies, was fabricated via a simple solvothermal approach. Benefiting from the abundant active sites and effective separation of photogenerated carriers of Bi₂ MoO₆ nanosheets, and the localized surface plasmon resonance effect of Bi nanoparticles, the Bi@Bi₂ MoO₆ sample exhibited great photocatalytic CO₂ reduction activity. Furthermore, adding NaHCO₃ into the system not only significantly increased the C₂ H₅ OH generation rate but also enhanced the product selectivity. In the photocatalytic measurement (0.17 mol L^-1 CO₂ -saturated NaHCO₃ solution), the highest formation rates of CO, CH₃ OH, and C₂ H₅ OH were reached at 0.85, 0.59, and 17.93 μmol g^-1  h^-1 (≈92 % selectivity), respectively.

Enhanced photocatalytic activity of Bi2WO6 with PVP addition for CO2 reduction into ethanol under visible light

The conversion of CO₂ into new carbon-based products, such as fuels and chemicals, is an attractive and promising means of mitigating global energy needs and minimizing environmental damage. Although bismuth tungstate (Bi₂WO₆) as a photocatalyst can promote CO₂ photoreduction, a systematic study for the development of a low-cost and efficient catalyst is needed. Thus, Bi₂WO₆ with different morphologies was successfully synthesized using the hydrothermal method. An experimental design was applied to investigate the effect of synthesis time and PVP (polyvinylpyrrolidone) concentration on catalyst photocatalytic activity. Crystal structures, morphologies, optical absorption, and surface charges of the catalysts were characterized by X-ray diffraction, scanning electron microscope, UV-vis diffuse-reflection spectroscopy, nitrogen adsorption, and zeta potential. All samples exhibited good performance for the photoreduction of CO₂ into ethanol, and both time and PVP concentration were significant in the ethanol yield. Changes in synthesis conditions induced differences in catalyst characteristics, such as morphology, crystallinity, and, predominantly, surface area. Furthermore, PVP addition improved photocatalytic efficiency by up to 258% compared with results without the surfactant. The best sample, W-8h-10%, presented a flower-like morphology and ethanol yield of 68.9 μmol g^-1 h^-1.

Organohalide Precursors for the Continuous Production of Photocatalytic Bismuth Oxyhalide Nanoplates

Metal heteroanionic materials, such as oxyhalides, are promising photocatalysts in which band positions can be engineered for visible-light absorption by changing the halide identity. Advancing the synthesis of these materials, bismuth oxyhalides of the form BiOX (X = Cl, Br) have been prepared using rapid and scalable ultrasonic spray synthesis (USS). Central to this advance was the identification of small organohalide molecules as halide sources. When these precursors are spatially and temporally confined in the aerosol phase with molten salt fluxes, powders composed of single-crystalline BiOX nanoplates can be produced continuously. A mechanism highlighting the in situ generation of halide ions is proposed. These materials can be used as photocatalysts and provide proof-of-concept toward USS as a route to more complex bismuth oxyhalide materials.

Advanced Two-Dimensional Heterojunction Photocatalysts of Stoichiometric and Non-Stoichiometric Bismuth Oxyhalides with Graphitic Carbon Nitride for Sustainable Energy and Environmental Applications

Semiconductor-based photocatalysis has been identified as an encouraging approach for solving the two main challenging problems, viz., remedying our polluted environment and the generation of sustainable chemical energy. Stoichiometric and non-stoichiometric bismuth oxyhalides (BiOX and BixOyXz where X = Cl, Br, and I) are a relatively new class of semiconductors that have attracted considerable interest for photocatalysis applications due to attributes, viz., high stability, suitable band structure, modifiable energy bandgap and two-dimensional layered structure capable of generating an internal electric field. Recently, the construction of heterojunction photocatalysts, especially 2D/2D systems, has convincingly drawn momentous attention practicably owing to the productive influence of having two dissimilar layered semiconductors in face-to-face contact with each other. This review has systematically summarized the recent progress on the 2D/2D heterojunction constructed between BiOX/BixOyXz with graphitic carbon nitride (g-C3N4). The band structure of individual components, various fabrication methods, different strategies developed for improving the photocatalytic performance and their applications in the degradation of various organic contaminants, hydrogen (H2) evolution, carbon dioxide (CO2) reduction, nitrogen (N2) fixation and the organic synthesis of clean chemicals are summarized. The perspectives and plausible opportunities for developing high performance BiOX/BixOyXz-g-C3N4 heterojunction photocatalysts are also discussed.

Construction of a Z-scheme heterojunction for high-efficiency visible-light-driven photocatalytic CO2 reduction

The continuous growth of fossil fuel consumption and large amounts of CO2 emissions have caused global energy crisis and climate change. The employment of semiconductor photocatalysts to convert CO2 into value-added products has attracted extensive attention and research worldwide in recent years. However, it is difficult for a single-component semiconductor photocatalyst to achieve this goal efficiently due to its drawbacks, such as low quantum efficiency, limited surface area, limited number of active sites, the short lifetime of photogenerated carriers, poor long-term stability, and the weak redox ability of carriers. Fortunately, inspired by photosynthesis, the construction of an artificial Z-scheme heterojunction has brought a new dawn for the realization of this goal. The Z-scheme heterojunction has a high separation efficiency of electron-hole pairs with strong redox ability and a wide light response range. The abovementioned advantages make the Z-scheme heterojunction provide a great opportunity for the conversion of CO2 to value-added chemicals. This review concisely reports the progress of the Z-scheme heterojunction in the field of photocatalytic CO2 reduction in recent years, photocatalytic mechanism, choice of oxidation and reduction systems, strategies for improving efficiency, confirmation of the Z-scheme charge transport mechanism, problems and challenges, and the prospects for the future.

Ultra-small zinc oxide nanosheets anchored onto sodium bismuth sulfide nanoribbons as solar-driven photocatalysts for removal of toxic pollutants and phtotoelectrocatalytic water oxidation

Heterostructured nanohybrids were prepared from sodium bismuth sulfide (NaBiS₂) and zinc oxide (ZnO) through hydrothermal process. The nanocomposite was used for tetracycline (TC) degradation as well as photoelectrochemical (PEC) water oxidation. Morphology and structural analyses were performed to confirm the dispersion of ultra-small ZnO nanosheets into the NaBiS₂ nanoribbons. By tuning the band gap, it was possible to degrade tetracycline toxic pollutant within 90 min under the simulated solar light irradiation, while PEC suggested a lower charge-transfer resistance, high photocurrent response, and exceptionally good stability. The highest photocurrent density of 0.751 mAcm^-2 vs. Ag/AgCl in 0.1 M Na₂SO₃ solution was observed under solar-light illumination. Detailed photocatalytic mechanisms for the degradation of TC and PEC water oxidation are discussed.

2D/1D Bi12O17Cl2/β-Bi2O3 heterojunction photocatalysts with boosted photocatalytic performance

A novel 2D/1D Bi₁₂O₁₇Cl₂/β-Bi₂O₃ heterostructure displays excellent photocatalytic degradation of methyl orange and phenol under solar light irradiation. The enhanced photocatalytic activity is ascribed to the unique vertical 2D Bi₁₂O₁₇Cl₂ nanosheets.

Promoting superoxide generation in Bi2WO6 by less electronegative substitution for enhanced photocatalytic performance: an example of Te doping

Doping with elements with lower electronegativity, like Te, shifts the band potentials of Bi2WO6 to the point that superoxide radical generation is feasible. As a result, an optimum of 2.5 at% Te doping improves the activity of Bi2WO6 by 48 times.

Selective Photocatalytic Reduction of CO2 to CH4 Modulated by Chloride Modification on Bi2WO6 Nanosheets

Solar-driven photocatalytic CO₂ reduction into CH₄ with H₂O is considered to be a promising way to alleviate the energy crisis and greenhouse effect. However, current CO₂ photoreduction technologies tend to overlook the role of photooxidation half reaction as well as the effect of the protons produced by water oxidation on CH₄ generation, resulting in low CO₂ conversion efficiency and poor CH₄ selectivity. In the present study, a series of chloride-modified Bi₂WO₆ nanosheets were constructed in view of chloride-assisted photocatalytic water oxidation. The results show that the CH₄ yield of the synthesized sample can be enhanced up to about 10 times compared to that with no Cl^- modification. Besides, the selectivity of CH₄ can be regulated by the loading amount of chloride, varying from 51.29% for Bi₂WO₆ to 94.98% for the maximum. The increase of product yield is attributed to chloride modification, which not only changed the morphology of the catalyst, but also modified the pathway of water oxidation. Further studies on intermediate products and the density functional theory calculation confirm that the Cl^- ions on Bi₂WO₆ nanosheets not only promote H₂O oxidation, but also lower the energy barrier for intermediate *CHO generation, thus facilitating CH₄ production. The results gained herein may provide some illuminating insights into the design of a highly selective photocatalyst for efficient CO₂ reduction.

Bismuth atom tailoring of indium oxide surface frustrated Lewis pairs boosts heterogeneous CO2 photocatalytic hydrogenation

The surface frustrated Lewis pairs (SFLPs) on defect-laden metal oxides provide catalytic sites to activate H₂ and CO₂ molecules and enable efficient gas-phase CO₂ photocatalysis. Lattice engineering of metal oxides provides a useful strategy to tailor the reactivity of SFLPs. Herein, a one-step solvothermal synthesis is developed that enables isomorphic replacement of Lewis acidic site In³⁺ ions in In₂O₃ by single-site Bi³⁺ ions, thereby enhancing the propensity to activate CO₂ molecules. The so-formed Bi_xIn_2-xO₃ materials prove to be three orders of magnitude more photoactive for the reverse water gas shift reaction than In₂O₃ itself, while also exhibiting notable photoactivity towards methanol production. The increased solar absorption efficiency and efficient charge-separation and transfer of Bi_xIn_2-xO₃ also contribute to the improved photocatalytic performance. These traits exemplify the opportunities that exist for atom-scale engineering in heterogeneous CO₂ photocatalysis, another step towards the vision of the solar CO₂ refinery.

Surface frustrated Lewis pairs (SFLPs) provide a unique class of active sites that enable efficient gas-phase CO₂ photocatalysis. How to tailor the reactivity of the SFLPs represents a major challenge, which the authors address here by single-site Bi³⁺ ion substitution of the SFLPs.