An Iron Quaterpyridine Complex as Precursor for the Electrocatalytic Reduction of CO2 to Methane

Photocatalytic CO2 Reduction Using Mixed Catalytic Systems Comprising an Iron Cation with Bulky Phenanthroline Ligands

This study reports on efficient photocatalytic CO2 reduction reactions using mixed catalytic systems of an Fe ion source and various 1,10-phenanthroline derivatives (R1R2p) as ligands in the presence of triethanolamine (TEOA). As the relatively bulky substituents at positions 2 and 9 of R1R2p weakened the ability to coordinate to the Fe ion, the Fe ion formed TEOA complexes. The free R1R2p accepted an electron from the reduced photosensitizer through proton-coupled electron transfer (PCET) using protons of TEOA dissolved in a CH3CN solution in a CO2 atmosphere as the initial step of the catalytic cycle. Although the mixed system of the nonsubstituted 1,10-phenanthroline generates a stable tris(phenanthroline)-Fe(II) complex in solution, this complex could not function as a CO2 reduction catalyst. The mechanism in which R1R2p interacts with the Fe ion after PCET was proposed for this efficient photocatalytic CO2 reduction. The proposed photocatalytic system using the 2,9-di-sec-butyl-phenanthroline ligand could produce CO with high efficiency (quantum yield of 8.2%) combined with a dinuclear Cu(I) complex as a photosensitizer.

Visible light-driven CO2 photoreduction by a Re(I) complex immobilized onto CuO/Nb2O5 heterojunctions

The immobilization of Re(I) complexes onto metal oxide surfaces presents an elegant strategy to enhance their stability and reusability toward photocatalytic CO2 reduction. In this study, the photocatalytic performance of fac-[ClRe(CO)3(dcbH2)], where dcbH2 = 4,4'-dicarboxylic acid-2,2'-bipyridine, anchored onto the surface of 1%m/m CuO/Nb2O5 was investigated. Following adsorption, the turnover number for CO production (TONCO) in DMF/TEOA increased significantly, from ten in solution to 370 under visible light irradiation, surpassing the TONCO observed for the complex onto pristine Nb2O5 or CuO surfaces. The CuO/Nb2O5 heterostructure allows for efficient electron injection by the Re(I) center, promoting efficient charge separation. At same time CuO clusters introduce a new absorption band above 550 nm that contributes for the photoreduction of the reaction intermediates, leading to a more efficient CO evolution and minimization of side reactions.

Mechanistic Insights into Photochemical CO2 Reduction to CH4 by a Molecular Iron-Porphyrin Catalyst

Iron tetraphenylporphyrin complex modified with four trimethylammonium groups (Fe-p-TMA) is found to be capable of catalyzing the eight-electron eight-proton reduction of CO₂ to CH₄ photochemically in acetonitrile. In the present work, density functional theory (DFT) calculations have been performed to investigate the reaction mechanism and to rationalize the product selectivity. Our results revealed that the initial catalyst Fe-p-TMA ([Cl-Fe(III)-LR₄]⁴⁺, where L = tetraphenylporphyrin ligand with a total charge of -2, and R₄ = four trimethylammonium groups with a total charge of +4) undergoes three reduction steps, accompanied by the dissociation of the chloride ion to form [Fe(II)-L^••2-R₄]²⁺. [Fe(II)-L^••2-R₄]²⁺, bearing a Fe(II) center ferromagnetically coupled with a tetraphenylporphyrin diradical, performs a nucleophilic attack on CO₂ to produce the ¹η-CO₂ adduct [CO₂^•--Fe(II)-L^•-R₄]²⁺. Two intermolecular proton transfer steps then take place at the CO₂ moiety of [CO₂^•--Fe(II)-L^•-R₄]²⁺, resulting in the cleavage of the C-O bond and the formation of the critical intermediate [Fe(II)-CO]⁴⁺ after releasing a water molecule. Subsequently, [Fe(II)-CO]⁴⁺ accepts three electrons and one proton to generate [CHO-Fe(II)-L^•-R₄]²⁺, which finally undergoes a successive four-electron-five-proton reduction to produce methane without forming formaldehyde, methanol, or formate. Notably, the redox non-innocent tetraphenylporphyrin ligand was found to play an important role in CO₂ reduction since it could accept and transfer electron(s) during catalysis, thus keeping the ferrous ion at a relatively high oxidation state. Hydrogen evolution reaction via the formation of Fe-hydride ([Fe(II)-H]³⁺) turns out to endure a higher total barrier than the CO₂ reduction reaction, therefore providing a reasonable explanation for the origin of the product selectivity.

Mechanistic Insights into Co and Fe Quaterpyridine-Based CO2 Reduction Catalysts: Metal-Ligand Orbital Interaction as the Key Driving Force for Distinct Pathways

Both [Co^II(qpy)(H₂O)₂]²⁺ and [Fe^II(qpy)(H₂O)₂]²⁺ (with qpy = 2,2':6',2″:6'',2‴-quaterpyridine) are efficient homogeneous electrocatalysts and photoelectrocatalysts for the reduction of CO₂ to CO. The Co catalyst is more efficient in the electrochemical reduction, while the Fe catalyst is an excellent photoelectrocatalyst ( ACS Catal. 2018, 8, 3411-3417). This work uses density functional theory to shed light on the contrasting catalytic pathways. While both catalysts experience primarily ligand-based reductions, the second reduction in the Co catalyst is delocalized onto the metal via a metal-ligand bonding interaction, causing a spin transition and a distorted ligand framework. This orbital interaction explains the experimentally observed mild reduction potential and slow kinetics of the second reduction. The decreased hardness and doubly occupied d_z²-orbital facilitate a σ-bond with the CO₂-π* in an η¹-κC binding mode. CO₂ binding is only possible after two reductions resulting in an EEC mechanism (E = electron transfer, C = chemical reaction), and the second protonation is rate-limiting. In contrast, the Fe catalyst maintains a Lewis acidic metal center throughout the reduction process because the metal orbitals do not strongly mix with the qpy-π* orbitals. This allows binding of the activated CO₂ in an η²-binding mode. This interaction stabilizes the activated CO₂ via a π-type interaction of a Fe-t_2g orbital and the CO₂-π* and a dative bond of the oxygen lone pair. This facilitates CO₂ binding to a singly reduced catalyst resulting in an ECE mechanism. The barrier for CO₂ addition and the second protonation are higher than those for the Co catalyst and rate-limiting.

Electrochemical Conversion of CO2 to CO by a Competent FeI Intermediate Bearing a Schiff Base Ligand

Iron complexes with a N₂ O₂ -type N,N'-bis(salicylaldehyde)-1,2-phenylenediamine salophen ligand catalyze the electrochemical reduction of CO₂ to CO in acetonitrile with phenol as the proton donor, giving rise to 90-99 % selectivity, faradaic efficiency up to 58 %, and turnover frequency up to 10³  s^-1 at an overpotential of 0.65 V. This novel class of molecular catalyst for CO₂ reduction operate through a mononuclear Fe^I intermediate, with phenol being involved in the process with first-order kinetics. The molecular nature of the catalyst and the low cost, easy synthesis and functionalization of the salophen ligand paves the way for catalyst engineering and optimization. Competitive electrodeposition of the coordination complex at the electrode surface results in the formation of iron-based nanoparticles, which are active towards heterogeneous electrocatalytic processes mainly leading to proton reduction to hydrogen (faradaic efficiency up to 80 %) but also to the direct reduction of CO₂ to methane with a faradaic efficiency of 1-2 %.

Molecular catalysis of CO2 reduction: recent advances and perspectives in electrochemical and light-driven processes with selected Fe, Ni and Co aza macrocyclic and polypyridine complexes

Earth-abundant Fe, Ni, and Co aza macrocyclic and polypyridine complexes have been thoroughly investigated for CO2 electrochemical and visible-light-driven reduction. Since the first reports in the 1970s, an enormous body of work has been accumulated regarding the two-electron two-proton reduction of the gas, along with mechanistic and spectroscopic efforts to rationalize the reactivity and establish guidelines for structure-reactivity relationships. The ability to fine tune the ligand structure and the almost unlimited possibilities of designing new complexes have led to highly selective and efficient catalysts. Recent efforts toward developing hybrid systems upon combining molecular catalysts with conductive or semi-conductive materials have converged to high catalytic performances in water solutions, to the inclusion of these catalysts into CO2 electrolyzers and photo-electrochemical devices, and to the discovery of catalytic pathways beyond two electrons. Combined with the continuous mechanistic efforts and new developments for in situ and in operando spectroscopic studies, molecular catalysis of CO2 reduction remains a highly creative approach.

Manifesto for the routine use of NMR for the liquid product analysis of aqueous CO2 reduction: from comprehensive chemical shift data to formaldehyde quantification in water

CO2 reduction research is at a critical turnaround since it has the potential to partially or even substantially fulfil future clean energy needs. CO2-to-CO electrochemical conversion is getting closer from industrial implementation requirements. Efforts are now more and more directed to obtain highly reduced products such as methanol, methane, ethylene, ethanol, etc., most of them being liquids. Gas-phase products (e.g., CO, CH4) are typically detected and quantified by well-defined gas chromatography (GC and GC/MS) protocols. On the other hand, NMR, GC-MS, HPLC have been used for the liquid phase characterization, but no routine technique has yet been established, mainly due to lack of versatility of a single technique. Additionally, except NMR and GC-MS, classical techniques cannot distinguish 13C from 12C products, although it is a mandatory step to assess products origin. Herein, we show the efficiency and applicability of 1H NMR as routine technique for liquid phase products analysis and we address two previous shortcomings. We first established a comprehensive 1H and 13C NMR chemical shifts list for all 12CO2 and 13CO2 reduction products in water ranging from C1 to C3. Then we overcame the difficulty of identifying aqueous formaldehyde intermediate by 1H NMR through an efficient chemical trapping step, along with isotopic signature study. Formaldehyde can be reliably quantified in water with a concentration as low as 50 μM.

Molecular quaterpyridine-based metal complexes for small molecule activation: water splitting and CO2 reduction

This tutorial describes recent developments in the use of metal quaterpyridine complexes as electrocatalysts and photocatalysts for water splitting and CO₂ reduction.

Transition metal-based catalysts for the electrochemical CO2 reduction: from atoms and molecules to nanostructured materials

An overview of the main strategies for the rational design of transition metal-based catalysts for the electrochemical conversion of CO₂, ranging from molecular systems to single-atom and nanostructured catalysts.

A highly active and robust iron quinquepyridine complex for photocatalytic CO2 reduction in aqueous acetonitrile solution

[Fe(qnpy)(H₂O)₂]²⁺ is a highly efficient and robust catalyst for visible-light-driven reduction of CO₂ to CO, with a TON for CO of up to 14 095 and selectivity of 98% using Ru(phen)₃Cl₂ as photosensitizer and BIH as sacrificial reductant.