Short-Time Hydrothermal Treatment of Poplar Wood for the Production of a Lignin-Derived Polyphenol Antioxidant

Abatement of environmental pollution by research on electrical resistivity and conductivity mechanism of poplar dust

Under conventional processing conditions, the resistivity of wood dust is in the range of insulating materials, which can induce a dust cloud explosion when there are static sparks. This paper took the fast-growing poplar wood commonly used in Chinese wood processing and studied the effects of moisture content, temperature, and particle size on the electrical resistivity value of sanded wood dust. Orthogonal analysis was conducted on the influencing factors. The results showed that the influence of moisture content on electrical resistivity was the most significant factor, followed by temperature and particle size. Further experiments have shown that when the moisture content increased from 6% to 32%, the resistivity decreased from 109 Ω cm to 105 Ω cm, which reached the suitable resistivity range of static discharge method. The ion concentration of wood dust extracted in cold water and hot water and the resistivity of poplar dust residue after extraction were determined. Nine metal ions (a total of 105.02 mol/g) were detected in cold-water extract, and the concentrations of K+, Na+, Mg2+ and Ca2+ accounted for 99.8%. The original poplar dust and the extracted poplar dust were measured and analyzed. The changes in water-soluble ion content, functional groups, crystallinity, and complexes of the wood dust before and after ion dissolution, jointly led to changes in the electrical resistivity of the wood dust (a difference of 2-4 orders of magnitude). It was verified that the way wood dust conducts electricity is through ion conduction. There were more abundant capillary system structures between poplar dust particles, allowing water-soluble ions to move more freely with water channels. The larger specific surface area and higher temperature also promoted the dissolution of water-soluble ions, which affected the electrical resistivity.

Sustainable use of giant reed to produce industrialized enzymes

The giant reed (Arundo donax) is a fast-growing plant adapted to different climatic and soil conditions; although its origin is Asian, the species has spread throughout the world. During its development, it consumes three times more water than typical native vegetation and is responsible for changing the landscape of riparian areas; the high biomass productivity and the annual harvest period make this crop an alternative to produce and/or extract industrial bioproducts. The main objective of this research was to evaluate the feasibility of using giant reed in a bioprocess that produces enzymes by a solid-state fermentation experiment, four fungal species were tested (Aspergillus niger GH1, Aspergillus niger PSH, Trichoderma harzianum, and Rhizopus oryzae); enzyme activities were performed using reported methodologies varying only reaction volumes. The A. niger GH1 and PSH strains were the best adapted to the plant material, A. niger GH1 was capable to produce 4 of the 5 evaluated enzymes (cellulase-endoglucanase (174.39 ± 19.62 U/L), xylanase (1313.31 ± 39.25 U/L), invertase (642.22 ± 23.55 U/L), and polyphenol oxidase (6094.01 ± 306.54) while A. niger PSH was able to produce 3 of the 5 evaluated enzymes (cellulase-endoglucanase (147.09 ± 13.88 U/L), xylanase (1307.76 ± 31.40 U/L), and invertase (603.92 ± 3.14 U/L).

Lignin-derived polyphenols with enhanced antioxidant activities by chemical demethylation and their structure-activity relationship

Lignin valorization to biobased polyphenols antioxidants is increasingly attractive in the modern industry due to their inherent phenolic structures. Herein, lignin-derived polyphenols with enhanced antioxidant activities were prepared from the most available technical lignin including organosolv lignin (OL), alkali lignin (AL), and enzyme lignin (EL) by iodocyclohexane (ICH) chemical demethylation. The structural evolution of lignin indicated that the C_Ar-OCH₃ group and the C_Ar-O-C_alkyl side-chain could be effectively transformed into the C_Ar-OH group, resulting in a significant increase of the phenolic-OH content and a slight decrease of the molecular weight. The 1,1-diphenyl-2-picrylhydrazyl radical (DPPH·) scavenging activity was in the order of ICHOL-24 > ICHAL-24 > ICHEL-24 ≈ FA > BHT, and the IC₅₀ value of ICHOL-24 was 0.56 times lower than that of BHT. The structure-activity relationship demonstrated the activities were quasi-linearly related to phenolic-OH contents and could be affected by molecular weights. The H/G/S proportions of lignin could be an indicator for accurate screening of efficient lignin-derived polyphenols antioxidants (LPA). It was preliminarily estimated to have economic feasibility for producing LPA from technical lignin by demethylation compared with synthetic or natural antioxidants. This work will help to develop efficient biobased antioxidants for lignin valorization.

Solvent-free synthesis of high-performance polyurethane elastomer based on low-molecular-weight alkali lignin

Using cheap and green lignin as a partial substitute for petroleum-based polyols is highly attractive for sustainable development of polyurethane elastomers (LPUes). However, the traditional synthesis process of LPUes inevitably uses toxic solvents that are difficult to remove or carcinogenic. Here, we reported a solvent-free synthesis method to prepare lignin-containing polyurethane elastomers (SF-LPUes) with high strength, high toughness and high elasticity. Most of the hydroxyl groups of lignin reacted with isocyanates to form a strong chemical cross-linking network, while the unreacted ones formed a dynamic hydrogen bond network with polyurethane matrix, contributing to the in-situ formation of lignin nanoparticles to build a nano-micro phase separation structure. Consequently, a dual-crosslinking network structure was formed and endowed SF-LPUes with excellent mechanical properties. Especially, the SF-LPUes prepared from low molecular alkali lignin possessed a tensile strength as high as 38.2 MPa, a maximum elongation at break of 1108 %, and an elastic recovery ratio of up to 98.7 %. Moreover, SF-LPUes showed impressing reprocessing performance and aging resistance. This work provides an industrial application prospect for the synthesis of lignin-containing polyurethane elastomers via a solvent-free synthesis process.

Sustainable lignin and lignin-derived compounds as potential therapeutic agents for degenerative orthopaedic diseases: A systemic review

Lignin, the most abundant natural and sustainable phenolic compound in biomass, has exhibited medicinal values due to its biological activities decided by physicochemical properties. Recently, the lignin and its derivatives (such as lignosulfonates and lignosulfonate) have been proven efficient in regulating cellular process and the extracellular microenvironment, which has been regarded as the key factor in disease progression. In orthopaedic diseases, especially the degenerative diseases represented by osteoarthritis and osteoporosis, excessive activated inflammation has been proven as a key stage in the pathological process. Due to the excellent biocompatibility, antibacterial and antioxidative activities of lignin and its derivatives, they have been applied to stimulate cells and restore the uncoupling bone remodeling in the degenerative orthopaedic diseases. However, there is a lack of a systemic review to state the current research actuality of lignin and lignin-derived compounds in treating degenerative orthopaedic diseases. Herein, we summarized the current application of lignin and lignin-derived compounds in orthopaedic diseases and proposed their possible therapeutic mechanism in treating degenerative orthopaedic diseases. It is hoped this work could guide the future preparation of lignin/lignin-derived drugs and implants as available therapeutic strategies for clinically degenerative orthopaedic diseases.

A review on lignin antioxidants: Their sources, isolations, antioxidant activities and various applications

Lignin, a biopolymer obtained from agricultural/forestry residues or paper pulping wastewater, is rich in aromatic structure, which is central to its adoption as a candidate to natural antioxidants. Through insight into its structural features from biomass, different functional groups would influence lignin antioxidant activity, wherein phenolic content is the most important factor, hence massive studies have focused on its improvement via different pretreatments and post-processing methods. Besides, lignin nanoparticles and chemical modifications are also efficient methods to improve antioxidant activity via increasing free content and decreasing bond dissociation enthalpy of phenolic hydroxyl. Lignin samples exhibit comparable radicals scavenging ability to commercial ones, showing their potential as renewable alternatives of synthesized antioxidants. Besides, their applications have also been discussed, which demonstrates lignin potential as an inexpensive antioxidant additive and consequent improvements on multiple functionalities. This review is dedicated to summarize lignin antioxidants extracted from biomass resources, methods to improve their antioxidant activity and their applications, which is beneficial for realizing lignin valorization.

Protective Effects of Lignin-Carbohydrate Complexes from Wheat Stalk against Bisphenol a Neurotoxicity in Zebrafish via Oxidative Stress

Lignin-carbohydrate complexes (LCCs) from different lignocellulosic biomass have shown biological qualities as antioxidant and immunostimulant. By contrast, the application of LCCs as protectant against neurotoxicity caused by different compounds is scarce. In this work, two kinds of LCCs with carbohydrate-rich and lignin-rich fractions were obtained from wheat stalk and used to protect against BPA-neurotoxicity in zebrafish. The results showed that BPA at a concentration of 500 µg/L results in neurotoxicity, including significant behavioral inhibition, and prevents the expression of central nervous system proteins in transgenic zebrafish models (Tg (HuC-GFP)). When the zebrafish was treated by LCCs, the reactive oxygen species of zebrafish decreased significantly with the change of antioxidant enzymes and lipid peroxidation, which was due to the LCCs' ability to suppress the mRNA expression level of key genes related to nerves. This is essential in view of the neurotoxicity of BPA through oxidative stress. In addition, BPA exposure had negative effects on the exercise behavior, the catalase (CAT) and superoxide dismutase (SOD) activity, and the larval development and gene expression of zebrafish larvae, and LCC preparations could recover these negative effects by reducing oxidative stress. In zebrafish treated with BPA, carbohydrate-rich LCCs showed stronger antioxidant activity than lignin-rich LCCs, showing their potential as a neuroprotective agents.

Multifaceted role of phyto-derived polyphenols in nanodrug delivery systems

As naturally occurring bioactive products, several lines of evidence have shown the potential of polyphenols in the medical intervention of various diseases, including tumors, inflammatory diseases, and cardiovascular diseases. Notably, owing to the particular molecular structure, polyphenols can combine with proteins, metal ions, polymers, and nucleic acids providing better strategies for polyphenol-delivery strategies. This contributes to the inherent advantages of polyphenols as important functional components for other drug delivery strategies, e.g., protecting nanodrugs from oxidation as a protective layer, improving the physicochemical properties of carbohydrate polymer carriers, or being used to synthesize innovative functional delivery vehicles. Polyphenols have emerged as a multifaceted player in novel drug delivery systems, both as therapeutic agents delivered to intervene in disease progression and as essential components of drug carriers. Although an increasing number of studies have focused on polyphenol-based nanodrug delivery including epigallocatechin-3-gallate, curcumin, resveratrol, tannic acid, and polyphenol-related innovative preparations, these molecules are not without inherent shortcomings. The active biochemical characteristics of polyphenols constitute a prerequisite to their high-frequency use in drug delivery systems and likewise to provoke new challenges for the design and development of novel polyphenol drug delivery systems of improved efficacies. In this review, we focus on both the targeted delivery of polyphenols and the application of polyphenols as components of drug delivery carriers, and comprehensively elaborate on the application of polyphenols in new types of drug delivery systems. According to the different roles played by polyphenols in innovative drug delivery strategies, potential limitations and risks are discussed in detail including the influences on the physical and chemical properties of nanodrug delivery systems, and their influence on normal physiological functions inside the organism.

Possible mechanisms for the generation of phenyl glycoside-type lignin-carbohydrate linkages in lignification with monolignol glucosides

The existence and formation of covalent lignin-carbohydrate (LC) linkages in plant cell walls has long been a matter of debate in terms of their roles in cell wall development and biomass use. Of the various putative LC linkages proposed to date, evidence of the native existence and formation mechanism of phenyl glycoside (PG)-type LC linkages in planta is particularly scarce. The present study aimed to explore previously overlooked mechanisms for the formation of PG-type LC linkages through the incorporation of monolignol glucosides, which are possible lignin precursors, into lignin polymers during lignification. Peroxidase-catalyzed lignin polymerization of coniferyl alcohol in the presence of coniferin and syringin in vitro resulted in the generation of PG-type LC linkages in synthetic lignin polymers, possibly via nucleophilic addition onto quinone methide (QM) intermediates formed during polymerization. Biomimetic lignin polymerization of coniferin via the β-glucosidase/peroxidase system also resulted in the generation of PG-type as well as alkyl glycoside-type LC linkages. This occurred via non-enzymatic QM-involving reactions and also via enzymatic transglycosylations involving β-glucosidase, which was demonstrated by in-depth structural analysis of the synthetic lignins by two-dimensional NMR. We collected heteronuclear single-quantum coherence (HSQC) NMR for native cell wall fractions prepared from pine (Pinus taeda), eucalyptus (Eucalyptus camaldulensis), acacia (Acacia mangium), poplar (Populus × eurarnericana) and bamboo (Phyllostachys edulis) wood samples, which exhibited correlations, albeit at low levels, that were well matched with those of the PG-type LC linkages in synthetic lignins incorporating monolignol glucosides. Overall, our results provide a molecular basis for feasible mechanisms for the generation of PG-type LC linkages from monolignol glucosides and further substantiates their existence in planta.