Controlling the Reaction Networks for Efficient Conversion of Glucose into 5-Hydroxymethylfurfural

Efficient Conversion of Glucose to Hydroxymethylfurfural: One-pot Brønsted Base and Acid Promoted Selective Isomerization and Dehydration

Development of elegant, selective, and efficient strategies for the production of value-added platform chemicals from renewable feedstocks are in high demand to achieve the future needs and sustainable goals. In this context, an efficient acid-promoted synthesis of highly valuable hydroxymethylfurfural (HMF) has been demonstrated from glucose, a major constituent of lignocellulosic biomass. The major challenge in the conversion of glucose to HMF is the selective isomerization of glucose to ketose, which in the present work has been successfully addressed through the amine-mediated rearrangement of glucose to aminofructose under Amadori rearrangement. Importantly, subsequent dehydration step affords HMF and regenerates the amine employed in the first step, which could be readily recovered. In addition, scale-up and successful integration into one-pot synthesis of HMF proves the efficiency and applicability of the present transformation in large scale application. In addition, the method was also successfully extended to other monosaccharides and disaccharides to produce HMF.

Aluminum ion intercalation in mesoporous multilayer carbocatalysts promotes the conversion of glucose to 5-hydroxymethylfurfural

In this study, an efficient modification strategy was proposed by facile loading of trace aluminum ions and p-toluene sulfonic acid (p-TSA) in carbon materials to improve their catalytic activity. p-TSA is then proven to regulate the carbonization process and promote the formation of mesoporous and multilayer structures. The hexa-coordinated aluminum structure is characterized by 1H-27Al solid-state nuclear magnetic resonance (SSNMR) and X-ray photoelectron spectroscopy, which serves as the Lewis-Brønsted acid site in carbocatalysts. Accordingly, the resulting catalyst facilitates a yield of ∼70% for converting glucose to 5-hydroxymethylfurfural (HMF) with a maximum carbon balance of around 91.4% at 150 °C in 6 h. In situ NMR, electrospray ionization mass spectrometry and isotope labeling analysis reveal that the hexa-coordinated aluminum sites promote the isomerization of glucose, and the sulfonic groups facilitate the subsequent dehydration and rehydration of fructose and levoglucosan intermediates. Kinetic models further indicate the decreased energy barrier for glucose conversion over the Al3+/p-TSA intercalated carbocatalyst. This work provides a promising strategy for engineering waste-derived carbocatalysts toward effectively converting carbohydrates to precursors of biofuels and bioplastics.

Production and Downstream Integration of 5-(Chloromethyl)furfural from Lignocellulose

The importance of reducing the strong dependence of the chemical industry on fossil feedstock is no longer a debate. Above-the-ground carbon is abundant, but scalable technologies to supply alternatives to fossil-fuel-derived chemicals and/or materials at the world scale are still not available. Lignocellulosic biomass is the most available carbon source, and a first requirement for its valorization is the complete saccharification of its sugar-bearing components. HCl-based technologies can achieve this at 20 °C and ambient pressure. These principles were disclosed in the 1920s, but the inability to economically separate sugars from acids impeded its commercialization. Avantium Chemicals B.V. developed a modern version of this "Bergius" highly concentrated acid hydrolysis, in which the saccharides in HCl are transformed into furanics without any prior purification, in particular, to 5-(chloromethyl)furfural (CMF). Saccharide conversion to CMF was developed by Mascal in the early 2000s. CMF is extracted in situ using immiscible organic solvents, allowing for an easy product separation. This study not only targets to investigate the viability and optimization of this integrated process but also aims to predict the outcome of the CMF formation reaction by applying design of experiment techniques from the hydrolyzed saccharides varying a broad range of reaction parameters.

Atomic Layer Deposition of the Geometry Separated Lewis and Brønsted Acid Sites for Cascade Glucose Conversion

Solid acid catalysts with bi-acidity are promising as workhouse catalysts in biorefining to produce high-quality chemicals and fuels. Herein, we report a new strategy to develop bi-acidic cascade catalysts by separating both acid sites in geometry via the atomic layer deposition (ALD) of Lewis acidic alumina on Brønsted acidic supports. Visualized by transmission electron microscopy and electron energy loss spectroscopy mapping, the ALD-deposited alumina forms a conformal alumina domain with a thickness of around 3 nm on the outermost surface of mesoporous silica-alumina. Solid state nuclear magnetic resonance investigation shows that the dominant Lewis acid sites distribute on the outermost surface, whereas intrinsic Brønsted acid sites locate inside the nanopores within the silica-rich substrate. In comparison to other bi-acidic solid catalyst counterparts, the special geometric distance of Lewis and Brønsted acid sites minimized the synergetic effect, leading to a cascade reaction environment. For cascade glucose conversion, the designed ALD catalyst showed a highly enhanced catalytic performance.

The key role of pretreatment for the one-step and multi-step conversions of European lignocellulosic materials into furan compounds

Nowadays, an increased interest from the chemical industry towards the furanic compounds production, renewable molecules alternatives to fossil molecules, which can be transformed into a wide range of chemicals and biopolymers. These molecules are produced following hexose and pentose dehydration. In this context, lignocellulosic biomass, owing to its richness in carbohydrates, notably cellulose and hemicellulose, can be the starting material for monosaccharide supply to be converted into bio-based products. Nevertheless, processing biomass is essential to overcome the recalcitrance of biomass, cellulose crystallinity, and lignin crosslinked structure. The previous reports describe only the furanic compound production from monosaccharides, without considering the starting raw material from which they would be extracted, and without paying attention to raw material pretreatment for the furan production pathway, nor the mass balance of the whole process. Taking account of these shortcomings, this review focuses, firstly, on the conversion potential of different European abundant lignocellulosic matrices into 5-hydroxymethyl furfural and 2-furfural based on their chemical composition. The second line of discussion is focused on the many technological approaches reported so far for the conversion of feedstocks into furan intermediates for polymer technology but highlighting those adopting the minimum possible steps and with the lowest possible environmental impact. The focus of this review is to providing an updated discussion of the important issues relevant to bringing chemically furan derivatives into a market context within a green European context.

Solvent Effects Enable Efficient Tandem Conversion of Cellulose and Its Monosaccharides Towards 5-Hydroxymethylfurfural

The biomass-derived platform compound 5-hydroxymethylfurfural (HMF) has been hailed as the "Sleeping Giant" due to its promising applications, and it occupies a critical spot in the biomass upgrading roadmap. HMF is typically produced from cellulose and its monosaccharides via a complex tandem conversion with multiple steps (i. e., cellulose depolymerization, glucose isomerization, fructose dehydration, etc.). Previous investigations have confirmed the irreplaceable contribution of solvents in regulating the tandem conversion of cellulose and its monosaccharides to HMF. However, the potential effects of solvents in contributing to this multi-step tandem process have not yet been clearly elucidated. In this context, this Review aims to provide in-depth insights into the intrinsic interactions between solvent system and substrate conversion (cellulose and its monosaccharides conversion), reaction regulation (reaction activity and selectivity regulation), as well as product acquisition (humins formation inhibition and product purification). It attempts to elucidate specific solvent effects to promote a more efficient tandem conversion of cellulose and its monosaccharides towards HMF. The insights provided in this Review may contribute to a more sustainable HMF production from biomass feedstocks and a further development of greener solvent systems.

Synthetic Routes for Designing Furanic and Non Furanic Biobased Surfactants from 5-Hydroxymethylfurfural

5-hydroxymethylfurfural (HMF) is one of the most valuable biomass platform molecules, enabling the construction of a plethora of high value-added furanic compounds. In particular, in the last decade, HMF has been considered as a starting material for designing biobased surfactants, not only because of its renewability and carbon footprint, but also because of its enhanced biodegradability. This Review presents recent examples of the different approaches to link the hydrophilic and lipophilic moieties into the hydrophobic furan (and tetrahydrofuran) ring, giving a variety of biobased surfactants that have been classified here according to the charge of the head polar group. Moreover, strategies for the synthesis of different non-furanic structures surfactant molecules (such as levulinic acid, cyclopentanols, and aromatics) derived from HMF are described. The new HMF-based amphiphilic molecules presented here cover a wide range of hydrophilic-lipophilic balance values and have suitable surfactant properties such as surface tension activity and critical micelle concentration, to be an important alternative for the replacement of non-sustainable surfactants.

Challenges of Green Production of 2,5-Furandicarboxylic Acid from Bio-Derived 5-Hydroxymethylfurfural: Overcoming Deactivation by Concomitant Amino Acids

The oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) is highly attractive as FDCA is considered as substitute for the petrochemically derived terephthalic acid. There are only few reports on the direct use of unrefined HMF solutions from biomass resources and the influence of remaining constituents on the catalytic processes. In this work, the oxidation of HMF in a solution as obtained from hydrolysis and dehydration of saccharides in chicory roots was investigated without intermediate purification steps. The amount of base added to the solution was critical to increase the FDCA yield. Catalyst deactivation occurred and was attributed to poisoning by amino acids from the bio-source. A strong influence of amino acids on the catalytic activity was found for all supported Au, Pt, Pd, and Ru catalysts. A supported AuPd(2 : 1)/C alloy catalyst exhibited both superior catalytic activity and higher stability against deactivation by the critical amino acids.

Advances of Ionic Liquids and Deep Eutectic Solvents in Green Processes of Biomass-Derived 5-Hydroxymethylfurfural

5-Hydroxymethylfurfural (HMF) is identified as an important bio-based platform chemical to bridge petroleum-based and biomass-based resources. It can be obtained through dehydration of various carbohydrates as well as converted to value-added fuels and chemicals. As designer solvents, ionic liquids (ILs) and deep eutectic solvents (DESs) have been widely used in catalytic transformation of biomass derivatives to various chemicals. This Review summarizes recent progress in experimental and theoretical studies on dehydration of carbohydrates such as fructose, glucose, sucrose, cellobiose, chitosan, cellulose, inulin, and even raw biomass to generate HMF using ILs and DESs as catalysts/cocatalysts and/or solvents/cosolvents. It also gives an overview of IL and DES-involved catalytic transformation of HMF to downstream products via oxidation, reduction, esterification, decarboxylation, and so forth. Challenges and prospects of ILs and DESs are also proposed for further production of HMF and HMF derivatives from biomass in green and sustainable processes.

5-Hydroxymethylfurfural and Furfural Chemistry Toward Biobased Surfactants

The use of 5-hydroxymethylfurfural (HMF), furfural, and furan as scaffolds for designing alternative surfactants is a rapidly developing research area. This Review gathers recent examples highlighting the variety of methods for grafting the necessary polar and non-polar appendages, exploiting the specific chemical reactivity of each of these platform molecules. While the furan (or tetrahydrofuran) backbone is maintained in some targeted amphiphiles, alternatives using rearranged HMF or furfural such as cyclopentanols or furanones have also been reported. This topic is an illustration of the diversification of the use of HMF and other biobased furanic platform molecules in the field of fine and specialty chemicals. The surfactants sector, which concerns some of the most largely consumed chemicals in everyday life, and still mostly produced from fossil resources, will benefit from such alternatives enabling increased renewable carbon content and structural innovation.

Progress in Catalytic Conversion of Renewable Chitin Biomass to Furan-Derived Platform Compounds

Chitin is one of the most abundant biopolymers on Earth but under-utilized. The effective conversion of chitin biomass to useful chemicals is a promising strategy to make full use of chitin. Among chitin-derived compounds, some furan derivatives, typically 5-hydroxymethylfurfural and 3-acetamido-5-acetylfuran, have shown great potential as platform compounds in future industries. In this review, different catalytic systems for the synthesis of nitrogen-free 5-hydroxymethylfurfural and nitrogen-containing 3-acetamido-5-acetylfuran from chitin or its derivatives are summarized comparatively. Some efficient technologies for enhancing chitin biomass conversion have been introduced. Last but not least, future challenges are discussed to enable the production of valuable compounds from chitin biomass via greener processes.

Identification of Crucial Intermediates in the Formation of Humins from Cellulose-Derived Platform Chemicals Under Brønsted Acid Catalyzed Reaction Conditions

Humins are one of the undesirable products formed during the dehydration of sugars as well as the conversion of 5-hydroxymethylfurfural (HMF) to value-added products. Thus, reducing the formation of humins is an important strategy for improving the yield of the aforementioned reactions. Even after a plethora of studies, the mechanism of formation and the structure of humins are still elusive. In this regard, we have employed density functional theory-based mechanistic studies and microkinetic analysis to identify crucial intermediates formed from glucose, fructose, and HMF that can initiate the polymerization reactions resulting in humins under Brønsted acid-catalyzed reaction conditions. This study brings light into crucial elementary reaction steps that can be targeted for controlling humins formation. Moreover, this work provides a rationale for the experimentally observed aliphatic chains and HMF condensation products in the humins structure. Different possible polymerization routes that could contribute to the structure of humins are also suggested based on the results. Importantly, the findings of this work indicate that increasing the rate of isomerization of glucose to fructose and reducing the rate of reaction between HMF molecules could be an efficient strategy for reducing humins formation.

Biochemical biorefinery: A low-cost and non-waste concept for promoting sustainable circular bioeconomy

The transition from a fossil-based linear economy to a circular bioeconomy is no longer an option but rather imperative, given worldwide concerns about the depletion of fossil resources and the demand for innovative products that are ecocompatible. As a critical component of sustainable development, this discourse has attracted wide attention at the regional and international levels. Biorefinery is an indispensable technology to implement the blueprint of the circular bioeconomy. As a low-cost, non-waste innovative concept, the biorefinery concept will spur a myriad of new economic opportunities across a wide range of sectors. Consequently, scaling up biorefinery processes is of the essence. Despite several decades of research and development channeled into upscaling biorefinery processes, the commercialization of biorefinery technology appears unrealizable. In this review, challenges limiting the commercialization of biorefinery technologies are discussed, with a particular focus on biofuels, biochemicals, and biomaterials. To counteract these challenges, various process intensification strategies such as consolidated bioprocessing, integrated biorefinery configurations, the use of highly efficient bioreactors, simultaneous saccharification and fermentation, have been explored. This study also includes an overview of biomass pretreatment-generated inhibitory compounds as platform chemicals to produce other essential biocommodities. There is a detailed examination of the technological, economic, and environmental considerations of a sustainable biorefinery. Finally, the prospects for establishing a viable circular bioeconomy in Nigeria are briefly discussed.

Changes in the Chemical Components of Processed Rehmanniae Radix Distillate during Different Steaming Times

Distillate was obtained in different processing cycles of processed Rehmanniae Radix (PRR). In this study, we investigated the chemical compositions of distillates 1 (Dis1) to 9 (Dis9) via GC-MS and LC-MS. Differences between Dis1–Dis9 were noticeable. A total of 13 and 21 compounds were detected via GC-MS and LC-MS, respectively, including organic acids, furans, alcohols, iridoid glycosides, phenylpropanoid glycosides, and saccharides. The relative contents of compound 2,5-hydroxymethylfurfural and furans all gradually increased with steaming time. Other compounds, however, exhibited a negative trend or fluctuated. Of these compounds, iridoid glycosides and phenylpropanoid glycosides were unstable and easily degraded, which led to a gradually decreasing concentration with increased steaming times. In addition, the degradation products were mainly derived from catalpol and acteoside, among which catalpol mainly existed as aglycone and its rearranged products. However, acteoside was converted into verbasoside through the removal of caffeoyl. Some volatile alcohols, such as phenylethyl alcohol, hydroxyphenyl ethanol, and 3-hydroxy-4-methoxybenzoic acid, were also likely from the degradation of acteoside and its homologs. These results provide an important reference basis for the processing methods, quality evaluation, and rational clinical application of PRR and its distillate.

Probing the effects of fructose concentration on the evolution of humins during fructose dehydration

A universal understanding on the concentration-aggravated evolution of humins during fructose dehydration has been demonstrated, wherein difructose anhydrides act as the key intermediates for both 5-hydroxymethylfurfural and humin formations.

High value utilization of biomass: selective catalytic transformation of lignocellulose into bio-based 2,5-dimethylphenol

A new strategy for the synthesis of high-value biochemical 2,5-dimethylphenol was constructed by lignocellulose catalytic pyrolysis and selective hydroxylation.

Recent Advances in the Brønsted/Lewis Acid Catalyzed Conversion of Glucose to HMF and Lactic Acid: Pathways toward Bio-Based Plastics

One of the most trending topics in catalysis recently is the use of renewable sources and/or non-waste technologies to generate products with high added value. That is why, the present review resumes the advances in catalyst design for biomass chemical valorization. The variety of involved reactions and functionality of obtained molecules requires the use of multifunctional catalyst able to increase the efficiency and selectivity of the selected process. The use of glucose as platform molecule is proposed here and its use as starting point for biobased plastics production is revised with special attention paid to the proposed tandem Bronsted/Lewis acid catalysts.

Glucose Conversion into 5-Hydroxymethylfurfural over Niobium Oxides Supported on Natural Rubber-Derived Carbon/Silica Nanocomposite

5-Hydroxymethylfurfural (HMF) is one of the most important lignocellulosic biomass-derived platform molecules for production of renewable fuel additives, liquid hydrocarbon fuels, and value-added chemicals. The present work developed niobium oxides (Nb2O5) supported on mesoporous carbon/silica nanocomposite (MCS), as novel solid base catalyst for synthesis of HMF via one-pot glucose conversion in a biphasic solvent. The MCS material was prepared via carbonization using natural rubber dispersed in hexagonal mesoporous silica (HMS) as a precursor. The Nb2O5 supported on MCS (Nb/MCS) catalyst with an niobium (Nb) loading amount of 10 wt.% (10-Nb/MCS) was characterized by high dispersion, and so tiny crystallites of Nb2O5, on the MCS surface, good textural properties, and the presence of Bronsted and Lewis acid sites with weak-to-medium strength. By varying the Nb loading amount, the crystallite size of Nb2O5 and molar ratio of Bronsted/Lewis acidity could be tuned. When compared to the pure silica HMS-supported Nb catalyst, the Nb/MCS material showed a superior glucose conversion and HMF yield. The highest HMF yield of 57.5% was achieved at 93.2% glucose conversion when using 10-Nb/MCS as catalyst (5 wt.% loading with respect to the mass of glucose) at 190 °C for 1 h. Furthermore, 10-Nb/MCS had excellent catalytic stability, being reused in the reaction for five consecutive cycles during which both the glucose conversion and HMF yield were insignificantly changed. Its superior performance was ascribed to the suitable ratio of Brønsted/Lewis acid sites, and the hydrophobic properties generated from the carbon moieties dispersed in the MCS nanocomposite.

Metal-free bifunctional graphene oxide-based carbocatalysts toward reforming biomass from glucose to 5-hydroxymethylfurfural

Graphene oxide (GO) and its derivatives are promising metal-free heterogeneous catalysts due to their high surface area and rich chemical properties. We developed a bifunctional boron-doped sulfonated graphene oxide (BS-GO) and demonstrated its excellent catalytic conversion of glucose to 5-hydroxymethylfurfural (HMF) in a one-pot reaction. BS-GO afforded a high HMF yield of 36.0% from glucose without the use of additives or strong acids. Furthermore, the origin of the catalytic active sites of BS-GO was investigated, unveiling the unique bifunctional catalytic mechanism; it was revealed that two disjunct moieties, boronic acid and phenylsulfonic acid, in a single nanosheet of BS-GO catalyst have a bifunctional effect resulting in excellent catalytic production of HMF. This study suggests the potential of BS-GO as a green and sustainable carbocatalyst for reforming biomass to produce value-added chemicals. We anticipate that the unique structural design presented in this study will provide a guide to afford viable carbocatalysts for diverse organic reactions.

High-throughput monitoring of biomass conversion reaction with automatic time-resolved analysis

Reactions of biomass conversions are of great importance in fine chemistry for substantial development. While numerous studies have been performed to search for functional materials to catalyze biomass conversions, a robust and high-throughput analytical method is rather limited, which may hamper further integration and automation of the reactions. Here we propose an automatic and sequential method for the investigation of glucose conversion. By combining sequential sample injection and high-speed capillary electrophoresis (HSCE) techniques, we can monitor the glucose conversion from the beginning toward the end with a good temporal resolution. The HSCE assays are performed using short capillaries (effective length of 10 cm, i.d./o.d. of 50 μm/365 μm), and the analytes are separated at an electric field of 467 V/cm and are detected by UV-absorption at 200 nm with mixed 0.2 mM CTAB, 10 mM borate, 20 mM sorbic acid (pH 12.2) as the background electrolyte. All compounds involved in the reaction, including all products (fructose, 5-hydroxymethylfurfural, formic acid and levulinic acid) and the remaining substrate glucose, are efficiently separated and simultaneously detected from just one analysis with a temporal resolution of one minute. The method exhibits high-resolution separation, a wide linear range with limit-of-detection down to μg/mL-level, as well as excellent repeatability in sequential analysis. It is indicated that the proposed method is of great value in the analysis of complicated biomass conversion and could be potentially applied in various catalytic chemical reactions.

A TiO2/Nb2O5·nH2O heterojunction catalyst for conversion of glucose into 5-hydroxymethylfurfural in water

A series of water-tolerant Lewis acidic TiO₂/Nb₂O₅·nH₂O heterojunction catalysts with different Ti : Nb ratios have been prepared and investigated in the conversion of glucose into HMF in water.