Progress in Materials Development for Flexible Perovskite Solar Cells and Future Prospects

Transition of Perovskite Solar Technologies to Being Flexible

Perovskite technologies has taken giant steps on its advances in only a decade time, from fundamental science to device engineering. The possibility to exploit this technology on a thin flexible substrate gives an unbeatable power to weight ratio compares to similar photovoltaic systems, opening new possibilities and new integration concepts, going from building integrated and applied photovoltaics (BIPV, BAPV) to internet of things (IoT). In this perspective, the recent progress of perovskite solar technologies on flexible substrates are summarized, focusing on the challenges that researchers face upon using flexible substrates. A dig into material science is necessary to understand what kind of mechanisms are limiting its efficiency compare to rigid substrates, and which physical mechanism limits the upscaling on flexible substrate. Furthermore, an overview of stability test on flexible modules will be described, suggesting common standard procedure and guidelines to follow, showing additional issues that flexible modules face upon bending, and how to prevent device degradation providing an ad-hoc encapsulation. Finally, the recent advances of flexible devices in the perovskite market will be shown, giving an outline of how this technology is exploited on flexible substrates, and what are still missing that need stakeholders' attention.

Flexible Perovskite Solar Cells: A Futuristic IoTs Powering Solar Cell Technology, Short Review

The perovskite solar cells (PSCs) technology translated on flexible substrates is in high demand as an alternative powering solution to the Internet of Things (IOTs). An efficiency of ∼26.1% on rigid and ∼25.09% on flexible substrates has been achieved for the PSCs. Further, it is also reported that F-PSC modules have a surface area of ∼900 cm2, with a PCE of ∼16.43%. This performance is a world record for an F-PSC device more significant than ∼100 cm2. The process optimization, and use of new transport materials, interface, and compositional engineering, as well as passivation, have helped in achieving such kind of performance of F-PSCs. Hence, the review focuses mainly on the progress of F-PSCs and the low-temperature fabrication methods for perovskite films concerning their full coverage, morphological uniformity, and better crystallinity. The transmittance, band gap matching, carrier mobility, and ease of low-temperature processing are the key figures of merit of interface layers. Electrode material's flexible and transparent nature has enhanced the device's mechanical stability. Stability, flexibility, and scalable F-PSC fabrication challenges are also addressed. Finally, an outlook on F-PSC applications for their commercialization based on cost will also be discussed in detail.

Multicoated Flexible Indium Tin Oxide Electrodes Fabricated Using Magnetron Sputtering and Arc Plasma Ion Plating for Flexible Perovskite Solar Cells

High-performance flexible Sn-doped In2O3 (indium tin oxide, ITO) electrodes were fabricated using a multicoating process on colorless polyimide (CPI) substrates for flexible perovskite solar cells (FPSCs). The effects of different coating sequences on the electrical, optical, and mechanical properties of the flexible ITO electrodes were thoroughly investigated after preparing them with direct-current magnetron sputtering (DMS) and arc plasma ion plating (APIP). Although both the sputtered ITO (SITO)/arc ion-plated ITO (AITO) film and the AITO/SITO film showed similarly low sheet resistance (18.69-25.29 Ω/sq) and high optical transmittance (94.96-96.85%), the coating sequence significantly affected the mechanical flexibility of the multicoated ITO films. The 120 nm-thick SITO/AITO electrode exhibited small outer and inner critical bending radii (3 mm and 3 mm, respectively) compared to the AITO/SITO electrode (4 and 5 mm, respectively). Owing to better adhesion of the arc-ion-plated ITO bottom layer and the amorphous structure of the top SITO layer, the SITO/AITO electrode exhibited excellent mechanical flexibility and durability. In addition, an FPSC using the SITO/AITO electrode achieved a higher power conversion efficiency (15.09%) than that with the AITO/SITO electrode (13.22%). This improvement was attributed to its high transmittance, low sheet resistance, smooth surface morphology, and enhanced hole collection efficiency. These findings highlight the efficacy of the combined DMS and APIP multicoating process for fabricating high-quality flexible ITO electrodes for high-performance FPSCs.

Mechanical Durability and Flexibility in Perovskite Photovoltaics: Advancements and Applications

The remarkable progress in perovskite solar cell (PSC) technology has witnessed a remarkable leap in efficiency within the past decade. As this technology continues to mature, flexible PSCs (F-PSCs) are emerging as pivotal components for a wide array of applications, spanning from powering portable electronics and wearable devices to integrating seamlessly into electronic textiles and large-scale industrial roofing. F-PSCs characterized by their lightweight, mechanical flexibility, and adaptability for cost-effective roll-to-roll manufacturing, hold immense commercial potential. However, the persistent concerns regarding the overall stability and mechanical robustness of these devices loom large. This comprehensive review delves into recent strides made in enhancing the mechanical stability of F-PSCs. It covers a spectrum of crucial aspects, encompassing perovskite material optimization, precise crystal grain regulation, film quality enhancement, strategic interface engineering, innovational developed flexible transparent electrodes, judicious substrate selection, and the integration of various functional layers. By collating and analyzing these dedicated research endeavors, this review illuminates the current landscape of progress in addressing the challenges surrounding mechanical stability. Furthermore, it provides valuable insights into the persistent obstacles and bottlenecks that demand attention and innovative solutions in the field of F-PSCs.

Scalable Lead Acetate-Based Perovskite Thin Films Prepared via Controlled Nucleation and Growth under Near Ambient Conditions

Lead acetate (PbAc2) is a promising precursor salt for large-scale production of perovskite solar cells, as its high solubility in polar solvents enables the use of scalable deposition methods such as inkjet printing and dip coating. In this study, uniform (40-230 nm) PbAc2 thin films were prepared via dip coating under near ambient lab conditions by tuning the PbAc2 precursor concentration. In a second step, these PbAc2 films were converted to methylammonium lead iodide (MAPI) perovskite by immersing them into methylammonium iodide (MAI) solutions. The nucleation and growth processes at play were controlled by altering key parameters, such as air humidity during the lead acetate deposition and MAI concentration when converting the PbAc2 film to MAPI. The research revealed that lead acetate is sensitive toward humidity and can undergo hydroxylation reactions affecting the reproducibility and quality of the produced solar cells. However, drying the PbAc2 films under low relative humidity (<1%) prior to conversion enables the production of high-quality MAPI films without the need of glovebox processing. Furthermore, SEM characterization revealed that the surface coverage of the MAPI film increased significantly with an increase of the MAI concentration at the conversion stage. The resulting morphology of the MAPI films can be explained by a standard nucleation and growth mechanism. Preliminary solar cells were produced using these MAPI films as the active layer. The best performing devices were obtained with a 140 nm thick lead acetate film converted to MAPI using a 12 mg/mL MAI solution, as these parameters resulted in a good surface coverage of the MAPI film. The results show that the methodology holds potential toward large-scale production of perovskite solar cells under near ambient conditions, which substantially simplifies the fabrication and lowers the production costs.

Strain Effects on Flexible Perovskite Solar Cells

Flexible perovskite solar cells (f-PSCs) as a promising power source have grabbed surging attention from academia and industry specialists by integrating with different wearable and portable electronics. With the development of low-temperature solution preparation technology and the application of different engineering strategies, the power conversion efficiency of f-PSCs has approached 24%. Due to the inherent properties and application scenarios of f-PSCs, the study of strain in these devices is recognized as one of the key factors in obtaining ideal devices and promoting commercialization. The strains mainly from the change of bond and lattice volume can promote phase transformation, induce decomposition of perovskite film, decrease mechanical stability, etc. However, the effect of strain on the performance of f-PSCs has not been systematically summarized yet. Herein, the sources of strain, evaluation methods, impacts on f-PSCs, and the engineering strategies to modulate strain are summarized. Furthermore, the problems and future challenges in this regard are raised, and solutions and outlooks are offered. This review is dedicated to summarizing and enhancing the research into the strain of f-PSCs to provide some new insights that can further improve the optoelectronic performance and stability of flexible devices.

Adjusted Bulk and Interfacial Properties in Highly Stable Semitransparent Perovskite Solar Cells Fabricated by Thermocompression Bonding between Perovskite Layers

In order to shield perovskite solar cells (PSCs) from extrinsic degradation factors and ensure long-term stability, effective encapsulation technology is indispensable. Here, a facile process is developed to create a glass-glass encapsulated semitransparent PSC using thermocompression bonding. From quantifying the interfacial adhesion energy and considering the power conversion efficiency of devices, it is confirmed that bonding between perovskite layers formed on a hole transport layer (HTL)/indium-doped tin oxide (ITO) glass and an electron transport layer (ETL)/ITO glass can offer an excellent lamination method. The PSCs fabricated through this process have only buried interfaces between the perovskite layer and both charge transport layers as the perovskite surface is transformed into bulk. The thermocompression process leads the perovskite to have larger grains and smoother, denser interfaces, thereby not only reducing defect and trap density but also suppressing ion migration and phase segregation under illumination. In addition, the laminated perovskite demonstrates enhanced stability against water. The self-encapsulated semitransparent PSCs with a wide-band-gap perovskite (Eg ∼ 1.67 eV) demonstrate a power conversion efficiency of 17.24% and maintain long-term stability with PCE > ∼90% in the 85 °C shelf test for over 3000 h and with PCE > ∼95% under AM 1.5 G, 1-sun illumination in an ambient atmosphere for over 600 h.

Enhancement in Power Conversion Efficiency of Perovskite Solar Cells by Reduced Non-Radiative Recombination Using a Brij C10-Mixed PEDOT:PSS Hole Transport Layer

Interface properties between charge transport and perovskite light-absorbing layers have a significant impact on the power conversion efficiency (PCE) of perovskite solar cells (PSCs). Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is a polyelectrolyte composite that is widely used as a hole transport layer (HTL) to facilitate hole transport from a perovskite layer to an anode. However, PEDOT:PSS must be modified using a functional additive because PSCs with a pristine PEDOT:PSS HTL do not exhibit a high PCE. Herein, we demonstrate an increase in the PCE of PSCs with a polyethylene glycol hexadecyl ether (Brij C10)-mixed PEDOT:PSS HTL. Photoelectron spectroscopy results show that the Brij C10 content becomes significantly high in the HTL surface composition with an increase in the Brij C10 concentration (0-5 wt%). The enhanced PSC performance, e.g., a PCE increase from 8.05 to 11.40%, is attributed to the reduction in non-radiative recombination at the interface between PEDOT:PSS and perovskite by the insulating Brij C10. These results indicate that the suppression of interface recombination is essential for attaining a high PCE for PSCs.

p-i-n Perovskite Solar Cells on Steel Substrates

An efficient substrate-configuration p-i-n metal-halide perovskite solar cell (PSC) is fabricated on a polymer-coated steel substrate. The optimized cell employs a Ti bottom electrode coated with a thin indium tin oxide (ITO) interlayer covered with a self-assembled [2-(9H-carbazol-9-yl)ethyl]phosphonic acid monolayer as a hole-selective contact. A triple-cation perovskite is used as the absorber layer. Thermally evaporated C₆₀ and atomic layer deposited SnO₂ layers serve to create an electron-selective contact. The cells use an ITO top electrode with an antireflective MgF₂ coating. The optimized cell fabricated on a polymer-coated steel substrate reaches a power conversion efficiency of 16.5%, which approaches the 18.4% efficiency of a p-i-n reference superstrate-configuration cell that uses a similar stack design. Optical simulations suggest that the remaining optical losses are due to the absorption of light by the ITO top electrode, the C₆₀ layer, the Ti bottom electrode, and reflection from the MgF₂ coating in almost equal amounts. The major loss is, however, in the fill factor as a result of an increased sheet resistance of the top ITO electrode.

Fabrication of Flexible Quasi-Interdigitated Back-Contact Perovskite Solar Cells

Perovskites are a promising class of semiconductor materials, which are being studied intensively for their applications in emerging new flexible optoelectronic devices. In this paper, device manufacturing and characterization of quasi-interdigitated back-contact perovskite solar cells fabricated on flexible substrates are studied. The photovoltaic parameters of the prepared flexible quasi-interdigitated back-contact perovskite solar cells (FQIBC PSCs) are obtained for the front- and rear-side illumination options. The dependences of the device’s open-circuit potential and short-circuit current on the illumination intensity are investigated to determine the main recombination pathways in the devices. Spectral response analysis of the devices demonstrates that the optical transmission losses can be minimized when FQIBC PSCs are illuminated from the front-side. Optoelectronic simulations are used to rationalize the experimental results. It is determined that the obtained FQIBC PSCs have high surface recombination losses, which hinder the device performance. The findings demonstrate a process for the fabrication of flexible back-contact PSCs and provide some directions for device performance improvements.

Ligand-Free Processable Perovskite Semiconductor Ink

Traditional covalent semiconductors require complex processing methods for device fabrication due to their high cohesive energies. Here, we develop a stable, ligand-free perovskite semiconductor ink that can be used to make patterned semiconductor-based optoelectronics in one step. The perovskite ink is formed via the dissolution of crystals of vacancy-ordered double perovskite Cs₂TeX₆ (X = Cl^-, Br^-, I^-) in polar aprotic solvents, leading to the stabilization of isolated [TeX₆]^2- octahedral anions and free Cs⁺ cations without the presence of ligands. The stabilization of the fundamental perovskite ionic octahedral building blocks in solution creates multifunctional inks with the ability to reversibly transform between the liquid ink and the solid-state perovskite crystalline system in air within minutes. These easily processable inks can be patterned onto various materials via dropcasting, spraying or painting, and stamping, highlighting the crucial role of solvated octahedral complexes toward the rapid formation of phase-pure perovskite structures in ambient conditions.

Improving the Photovoltaic Performance of Flexible Solar Cells with Semitransparent Inorganic Perovskite Active Layers by Interface Engineering

Inorganic perovskite CsPbBr₃ has broad application prospects in photovoltaic windows, tandem cells, and other fields due to its intrinsic semitransparency, excellent photoelectric properties, and stability. In this work, a high-quality semitransparent CsPbBr₃ film was prepared by a sequential vacuum evaporation deposition method without high-temperature annealing and successfully used as the active layer of flexible perovskite solar cells (F-PSCs) for the first time, achieving a power conversion efficiency (PCE) of 5.00%. By introducing an energy-level buffer layer of Cu₂O between CsPbBr₃ and Spiro-OMeTAD, the champion PCE has been further improved to 5.67% owing to the reduction of electron-hole recombination and enhanced charge extraction. The optimized devices present higher stability, which can maintain more than 95% of the initial efficiency even after continuous heating at 85 °C for 240 h. Moreover, the F-PSCs also exhibit excellent mechanical durability, and 90% of the original PCE can be retained after 1000 bending cycles at a curvature radius of 3 mm.

Phenothiazine functional materials for organic optoelectronic applications

Phenothiazine (PTZ) is one of the most extensively investigated S, N heterocyclic aromatic hydrocarbons due to its unique optical, electronic properties, flexibility of functionalization, low cost, and commercial availability. Hence, PTZ and its derivative materials have been attractive in various optoelectronic applications in the last few years. In this prospective, we have focused on the most significant characteristics of PTZ and highlighted how the structural modifications such as different electron donors or acceptors, length of the π-conjugated system or spacers, polar or non-polar chains, and other functional groups influence the optoelectronic properties. This prospective provides a recent account of the advances in phenothiazine derivative materials as an active layer(s) for optoelectronic (viz. dye sensitized solar cells (DSSCs), perovskite solar cells (PSCs), organic solar cells (OSCs), organic light-emitting diodes (OLEDs), organic field-effect transistor (OFETs), chemosensing, nonlinear optical materials (NLOs), and supramolecular self-assembly applications. Finally, future prospects are discussed based on the structure-property relationship in PTZ-derivative materials. This overview will pave the way for researchers to design and develop new PTZ-functionalized structures and use them for various organic optoelectronic applications.