Mobility Relaxation of Holes and Electrons in Polymer:Fullerene and Polymer : Non-Fullerene Acceptor Solar Cells

Enhancing Detection Frequency and Reducing Noise Through Continuous Structures via Release-Controlled Transfer Toward Light-Based Wireless Communication

Organic photodetectors (OPDs) have received considerable attention owing to their superior absorption coefficient and tunable bandgap. The introduction of bulk-heterojunction (BHJ) structure aims to maximize charge generation, however, its response speed is constrained by the random distribution of donor and acceptor. Herein, a multiple-active layer design consisting of a single acceptor layer and a bulk-heterojunction layer (A/BHJ structure) is introduced, which combines the benefits of both the planar junction and the BHJ, improving photo-sensing. A transfer process is employed for this structure, which involves calculating the energy release rate at each interface, considering temperature and velocity. Consequently, the OPD with the A/BHJ structure is successfully fabricated through transfer printing, resulting in reduced dark current, superior detectivity (1.06 × 1013 Jones), and rapid response, achieved by creating a high hole injection barrier and suppressing trap sites within the interfaces. By thoroughly investigating charge dynamics in the structure, the A/BHJ structure-based OPD attains large bandwidth detection with high signal-to-noise. An efficient wireless data communication system with digital-to-analog conversion is showcased using the A/BHJ structure-based OPD.

Combined Charge Extraction by Linearly Increasing Voltage and Time-Resolved Microwave Conductivity to Reveal the Dynamic Charge Carrier Mobilities in Thin-Film Organic Solar Cells

This article reports a purely experiment-based method to evaluate the time-dependent charge carrier mobilities in thin-film organic solar cells (OSCs) using simultaneous charge extraction by linearly increasing the voltage (CELIV) and time-resolved microwave conductivity (TRMC) measurements. This method enables the separate measurement of electron mobility (μe) and hole mobility (μh) in a metal-insulator-semiconductor (MIS) device. A slope-injection-restoration voltage profile for MIS-CELIV is also proposed to accurately determine the charge densities. The dynamic behavior of μe and μh is examined in five bulk heterojunction (BHJ) OSCs of polymer:fullerene (P3HT:PCBM and PffBT4T:PCBM) and polymer:nonfullerene acceptor (PM6:ITIC, PM6:IT4F, and PM6:Y6). While the former exhibits fast decays of μh and μe, the latter, in particular, PM6:IT4F and PM6:Y6, exhibits slow decays. Notably, the high-performing PM6:Y6 demonstrates both a balanced mobility (μe/μh) of 1.0-1.1 within 30 μs and relatively large CELIV-TRMC mobility values among the five BHJs. The results exhibit reasonable consistency with a high fill factor. The proposed new CELIV-TRMC technique offers a path toward a comprehensive understanding of dynamic mobility and its correlation with the OSC performance.

Designs and understanding of small molecule-based non-fullerene acceptors for realizing commercially viable organic photovoltaics

Organic photovoltaics (OPVs) have emerged as a promising next-generation technology with great potential for portable, wearable, and transparent photovoltaic applications. Over the past few decades, remarkable advances have been made in non-fullerene acceptor (NFA)-based OPVs, with their power conversion efficiency exceeding 18%, which is close to the requirements for commercial realization. Novel molecular NFA designs have emerged and evolved in the progress of understanding the physical features of NFA-based OPVs in relation to their high performance, while there is room for further improvement. In this review, the molecular design of representative NFAs is described, and their blend characteristics are assessed via statistical comparisons. Meanwhile, the current understanding of photocurrent generation is reviewed along with the significant physical features observed in high-performance NFA-based OPVs, while the challenging issues and the strategic perspectives for the commercialization of OPV technology are also discussed.