Crosslinking Nanoarchitectonics of Nitrogen-doped Carbon/MoS2 Nanosheets/Ti3 C2 Tx MXene Hybrids for Highly Reversible Sodium Storage

Enhanced redox kinetics of Prussian blue analogues for superior electrochemical deionization performance

Prussian blue analogues (PBAs), representing the typical faradaic electrode materials for efficient capacitive deionization (CDI) due to their open architecture and high capacity, have been plagued by kinetics issues, leading to insufficient utilization of active sites and poor structure stability. Herein, to address the conflict issue between desalination capacity and stability due to mismatched ionic and electronic kinetics for the PBA-based electrodes, a rational design, including Mn substitution and polypyrrole (ppy) connection, has been proposed for the nickel hexacyanoferrate (Mn-NiHCF/ppy), serving as a model case. Particularly, the theoretical calculation manifests the reduced bandgap and energy barrier for ionic diffusion after Mn substitution, combined with the increased electronic conductivity and integrity through ppy connecting, resulting in enhanced redox kinetics and boosted desalination performance. Specifically, the optimized Mn-NiHCF/ppy demonstrates a remarkable desalination capacity of 51.8 mg g-1 at 1.2 V, accompanied by a high charge efficiency of 81%, and excellent cycling stability without obvious degradation up to 50 cycles, outperforming other related materials. Overall, our concept shown herein provides insights into the design of advanced faradaic electrode materials for high-performance CDI.

Unveiling the bifunctional roles of Cetyltrimethylammonium bromide in construction of Nb2CTx@MoSe2 heterojunction for fast potassium storage

Exploring robust electrode materials which could permit fast and reversible insertion/extraction of large K+ is a crucial challenge for potassium-ion batteries (PIBs). Smart interfacial design could facilitate electron/ion transport as well as assure the integrity of electrode. Herein, Cetyltrimethylammonium bromide (CTAB) was found to play bifunctional roles in construction of Nb2CTx@MoSe2 heterostructure. Firstly, functionalization of CTAB on the surface of Nb2CTx could influence the subsequent growth of MoSe2 by electrostatic effect, stereochemical effect and the synergetic Lewis acid-base interaction, leading to the formation of Nb2CTx@MoSe2 with tiled heterostructure. Secondly, the interlayer spacing of Nb2CTx was expanded from 0.77 to 1.21 nm owing to the pillar effect of CTAB. As excepted, the capacity retention was 80 % from 100 mA g-1 (406 mA h g-1) to 1000 mA g-1 concerning rate capability and the specific capacity maintained at 240 mA h g-1 (at 2000 mA g-1) over 300 cycles. The calculated DK values from Galvanostatic intermittent titration technique (GITT) measurement of the titled C-T-Nb2CTx@MoSe2@C electrode is two orders of magnitude larger than the traditional T-Nb2CTx@MoSe2@C electrode, further confirming intimate interface between MoSe2 and Nb2CTx could provide convenient potassium-ion transport channels and fast diffusion kinetics. Finally, ex-situ characterizations at different charging and discharging voltage stages, including ex-situ XRD/Raman/HRTEM/XPS have been carried out to reveal the potassium storage mechanism. This work provides a facile strategy for the regulation of interface engineering by the assist of CTAB which could extend to other MXenes-TMDs (Transition metal dichalcogenides) hybrid electrodes.

Hollow Carbon and MXene Dual-Reinforced MoS2 with Enlarged Interlayers for High-Rate and High-Capacity Sodium Storage Systems

Sodium-ion batteries (SIBs) and sodium-ion capacitors (SICs) are promising candidates for cost-effective and large-scale energy storage devices. However, sluggish kinetics and low capacity of traditional anode materials inhibit their practical applications. Herein, a novel design featuring a layer-expanded MoS2 is presented that dual-reinforced by hollow N, P-codoped carbon as the inner supporter and surface groups abundant MXene as the outer supporter, resulting in a cross-linked robust composite (NPC@MoS2 /MXene). The hollow N, P-codoped carbon effectively prevents agglomeration of MoS2 layers and facilitates shorter distances between the electrolyte and electrode. The conductive MXene outer surface envelops the NPC@MoS2 units inside, creating interconnected channels that enable efficient charge transfer and diffusion, ensuring rapid kinetics and enhanced electrode utilization. It exhibits a high reversible capacity of 453 mAh g-1 , remarkable cycling stability, and exceptional rate capability with 54% capacity retention when the current density increases from 100 to 5000 mA g-1 toward SIBs. The kinetic mechanism studies reveal that the NPC@MoS2 /MXene demonstrates a pseudocapacitance dominated hybrid sodiation/desodiation process. Coupled with active carbon (AC), the NPC@MoS2 /MXene//AC SICs achieve both high energy density of 136 Wh kg-1 at 254 W kg-1 and high-power density of 5940 W kg-1 at 27 Wh g-1 , maintaining excellent stability.

Boosted Redox Kinetics Enabling Na3V2(PO4)3 with Excellent Performance at Low Temperature through Cation Substitution and Multiwalled Carbon Nanotube Cross-Linking

The open NASICON framework and high reversible capacity enable Na3V2(PO4)3 (NVP) to be a highly promising cathode candidate for sodium-ion batteries (SIBs). Nevertheless, the unsatisfied cyclic stability and degraded rate capability at low temperatures due to sluggish ionic migration and poor conductivity become the main challenges. Herein, excellent sodium storage performance for the NVP cathode can be received by partial potassium (K) substitution and multiwalled carbon nanotube (MWCNT) cross-linking to modify the ionic diffusion and electronic conductivity. Consequently, the as-fabricated Na3-xKxV2(PO4)3@C/MWCNT can maintain a capacity retention of 79.4% after 2000 cycles at 20 C. Moreover, the electrochemical tests at -20 °C manifest that the designed electrode can deliver 89.7, 73.5, and 64.8% charge of states, respectively, at 1, 2, and 3 C, accompanied with a capacity retention of 84.3% after 500 cycles at 20 C. Generally, the improved electronic conductivity and modified ionic diffusion kinetics resulting from K doping and MWCNT interconnecting endows the resultant Na3-xKxV2(PO4)3@C/MWCNT with modified electrochemical polarization and improved redox reversibility, contributing to superior performance at low temperatures. Generally, this study highlights the potential of alien substitution and carbon hybridization to improve the NASICON-type cathodes toward high-performance SIBs, especially at low temperatures.

Interface Engineering of Fe7S8/FeS2 Heterostructure in situ Encapsulated into Nitrogen-Doped Carbon Nanotubes for High Power Sodium-Ion Batteries

Heterostructure engineering combined with carbonaceous materials shows great promise toward promoting sluggish kinetics, improving electronic conductivity, and mitigating the huge expansion of transition metal sulfide electrodes for high-performance sodium storage. Herein, the iron sulfide-based heterostructures in situ hybridized with nitrogen-doped carbon nanotubes (Fe7S8/FeS2/NCNT) have been prepared through a successive pyrolysis and sulfidation approach. The Fe7S8/FeS2/NCNT heterostructure delivered a high reversible capacity of 403.2 mAh g-1 up to 100 cycles at 1.0 A g-1 and superior rate capability (273.4 mAh g-1 at 20.0 A g-1) in ester-based electrolyte. Meanwhile, the electrodes also demonstrated long-term cycling stability (466.7 mAh g-1 after 1,000 cycles at 5.0 A g-1) and outstanding rate capability (536.5 mAh g-1 at 20.0 A g-1) in ether-based electrolyte. This outstanding performance could be mainly attributed to the fast sodium-ion diffusion kinetics, high capacitive contribution, and convenient interfacial dynamics in ether-based electrolyte.

In-situ decoration of tin sulfide on Niobium carbide MXene with robust electronic coupling for improved sodium storage performance

Tin sulfide (SnS) has been considered as one of the most promising sodium storage materials because of its excellent electrochemical activity, low cost, and low-dimensional structure. However, owing to the serious volume change upon discharging/charging and poor electronic conductivity, the SnS-based electrodes often suffer from electrode pulverization and sluggish reaction kinetics, thus resulting in serious capacity fading and degraded rate capability. In this work, SnS nanoparticles uniformly distributed on the surface of the layered Niobium carbide MXene (SnS/Nb₂CT_x) were fabricated through a facile solvothermal approach followed by calcination, endowing the SnS/Nb₂CT_x with a three-dimensional interconnected framework as well as fast charge transfer. Benefitting from the excellent electronic/ionic conductivity, efficient buffering matrix, abundant active sites, and high sodium storage activity inherited from the structure design, the robust electronic coupling between SnS nanoparticle and Nb₂CT_x MXene results in excellent electrochemical output, which demonstrates superior reversible capacities of 479.6 (0.1 A/g up to 100 cycles) and 278.9 mAh/g (0.5 A/g up to 500 cycles) upon sodium storage, respectively. The excellent electrochemical performance manifests the promise of the combination of metal sulfides with Nb₂CT_x MXene to fabricate high-performance electrodes for sodium storage.

Cross-linked amorphous potassium titanate Nanobelts/Titanium carbide MXene nanoarchitectonics for efficient sodium storage at low temperature

One of the major challenges to improving the performance of sodium-ion batteries at low temperatures is to develop effective anode materials with novel structures and fast reaction kinetics. Currently, converting electrode materials from the crystalline to amorphous state is an effective approach to fabricate the electrode material with high sodium storage performance. Herein, a three-dimensional (3D) cross-linked heterostructure with one-dimensional (1D) amorphous potassium titanate (KTiOx) nanobelts in-situ grown on two-dimensional (2D) titanium carbide (Ti2CTx) nanosheets (a-KTiOx/Ti2CTx) was fabricated through alkalization of the multilayered Ti2CTx MXene, which exhibits remarkable sodium storage performance at both room and low temperatures. The heterostructure prepared by the combination of 1D amorphous nanobelts and 2D conductive nanosheets enables efficient strain alleviation in the electrode, a high capacitive contribution to charge storage, rapid ionic diffusion kinetics, and robust electrode integrity, thus enhancing the sodium storage performance. In particular, reversible capacities of 221.9, 144.2 and 112.6 mAh/g can be achieved at 0.1 A/g after 100 cycles at 25, 0 and -25 °C, respectively. This study provides significant insights into the construction of MXene-based electrode materials for sodium storage at low temperatures.

Tin nanoparticle in-situ decorated on nitrogen-deficient carbon nitride with excellent sodium storage performance

Tin (Sn)-based electrodes, featuring high electrochemical activity and suitable voltage plateau, gain tremendous attention as promising anode materials for sodium-ion batteries. However, the application of Sn-based electrodes has been largely restricted by the serious pulverization upon repeated cycling due to their large volume expansion, especially at high current densities. Herein, a unique three-dimensional decorated structure was designed, containing ultrafine Sn nanoparticles and nitrogen-deficient carbon nitride (Sn/D-C₃N₄), to efficiently alleviate the expansion stress and prevent the aggregation of Sn nanoparticles. Furthermore, the density functional theory calculations have proved the high sodium adsorption ability and improved diffusion kinetics through the hybridization of D-C₃N₄ with Sn nanoparticles. Further combining the high electronic/ionic conductivity provided by the porous C₃N₄ matrix, high charge contribution from capacitive behavior, and high sodium storage activity of ultrafine Sn nanoparticles, the resultant Sn/D-C₃N₄ can achieve an ultrahigh reversible capacity of 518.3 mA g^-1 after 300 cycles at 1.0 A g^-1, and even maintaining a reversible capacity of 436.1 mAh g^-1 up to 500 cycles (5.0 A g^-1). What's more, the optimized Sn/D-C₃N₄∥Na₃V₂(PO₄)₃/C full cell can keep a high capacity retention of 87.1% at 1.0 A g^-1 even after 5000 cycles, manifesting excellent sodium storage performance.

Rational Design Hierarchical SnS2 Uniformly Adhered to Three-Sided Carbon Active Sites to Enhance Sodium Storage

Reducing material accumulation and designing reasonable sizes are critical strategies for increasing the rate and cycling stability of electrode materials. Herein, we presented a double-walled hollow carbon spheres (DWHCSs) loading strategy for achieving ultrafine SnS₂ nanosheet adhesion by utilizing three-sided active sites of the interior/exterior carbon walls. The structure effectively shortened the electron/ion transport path, increased the effective contact between electrolyte and electrode material, and promoted ion diffusion kinetics. Furthermore, the hollow structure can adapt to the volume change of the electrode during the cycle, preventing active substances from draining. Based on the above advantages, SnS₂@DWHCSs as an anode material for sodium ion batteries (SIBs) exhibited a distinguished reversible capacity of 665.7 mA h g^-1 at 2 A g^-1 after 1000 cycles, and a superior rate ability of 377.6 mA h g^-1 at an ultrahigh rate of 10 A g^-1. The outstanding electrochemical performance revealed that the structure exhibited a broad application prospect in the field of energy storage and provided a reference for the rational design of other 2D materials.

Improved electrode kinetics of a modified Na3V2(PO4)3 cathode through Zr substitution and nitrogen-doped carbon coating towards robust electrochemical performance at low temperature

The substitution of V with Zr in a NASICON structure and an NC coating endow 0.1Zr-NVP/NC with excellent electrochemical performance at low temperature.