Advances of Ionic Liquids and Deep Eutectic Solvents in Green Processes of Biomass-Derived 5-Hydroxymethylfurfural

The Use of 5-Hydroxymethylfurfural (5-HMF) in Multi-Component Hantzsch Dihydropyridine Synthesis

The renewable 5-hydroxymethylfurfural (5-HMF) has gained a wide interest from the chemistry community as a valuable biobased platform opening the way to many applications. Despite an impressive number of publications reporting either its preparation or its functionalization, its direct use in fine chemistry, and especially in multi-component reaction (MCR), is less reported. Here, we report a complete study of the use of 5-HMF in the Hantzsch dihydropyridines synthesis. The strategy was applied to a scope of β-dicarbonyl molecules (including β-ketoesters and 1,3-diketones) in a 3-component procedure leading to a series of symmetrical 1,4-dihydropyridines derived from 5-HMF in excellent yields. The study was extended to the 4-component protocol using one equivalent of a β-ketoester and one equivalent of 5,5-dimethyl-1,3-cyclohexanedione (dimedone), which efficiently provided the corresponding unsymmetrical dihydropyridines.

One-Pot Effective Approach to 2,5-Diformylfuran From Carbohydrates Using MoS2-Decorated Carbonaceous Sugarcane Bagasse

Exploring the transformation of carbohydrates into valuable chemicals offers a promising and eco-friendly method for utilizing renewable biomass resources. Developing a bi-functional, sustainable heterogeneous catalyst is of utmost importance to attain a high level of selectivity for the desired product, 2,5-diformylfuran (DFF), in this direct conversion process. In this study, we developed a highly effective catalytic system to convert diverse carbohydrates into DFF. Our approach involved utilizing a MoS2 catalyst supported by amorphous carbon derived from sulfonated sugarcane biomass. The MoS2@SBG-SO3H composite was successfully synthesized using a facile and highly efficient method. The transformation of fructose into DFF achieved a significant yield of 70 % for 5 h at 160 °C using a one-step and one-pot reaction through dehydration and oxidation with oxygen. The oxidation of 5-hydroxymethylfurfural (HMF) into DFF using MoS2@SBG-SO3H was obtained at 94 % DFF within 5 h; the activation energy was 38.3 kJ . mol-1. The catalyst displayed convenient recovery and reusability. The direct synthesis of DFF from various carbohydrates, such as sucrose, glucose, maltose, and lactose, resulted in favorable yields. Our research provides a quick, green, and efficient process for preparing carbon-based solid acid catalysts and DFF.

Catalytic Transformation of Carbohydrates into Renewable Organic Chemicals by Revering the Principles of Green Chemistry

Adherence to the principles of green chemistry in a biorefinery setting ensures energy efficiency, reduces the consumption of materials, simplifies reactor design, and rationalizes the process parameters for synthesizing affordable organic chemicals of desired functional efficacy and ingrained sustainability. The green chemistry metrics facilitate assessing the relative merits and demerits of alternative synthetic pathways for the targeted product(s). This work elaborates on how green chemistry has emerged as a transformative framework and inspired innovations toward the catalytic conversion of biomass-derived carbohydrates into fuels, chemicals, and synthetic polymers. Specific discussions have been incorporated on the judicious selection of feedstock, reaction parameters, reagents (stoichiometric or catalytic), and other synthetic auxiliaries to obtain the targeted product(s) in desired selectivity and yield. The prospects of a carbohydrate-centric biorefinery have been emphasized and research avenues have been proposed to eliminate the remaining roadblocks. The analyses presented in this review will steer to developing superior synthetic strategies and processes for envisaging a sustainable bioeconomy centered on biomass-derived carbohydrates.

Hydrocarbon Extraction with Ionic Liquids

Separation and reaction processes are key components employed in the modern chemical industry, and the former accounts for the majority of the energy consumption therein. In particular, hydrocarbon separation and purification processes, such as aromatics extraction, desulfurization, and denitrification, are challenging in petroleum refinement, an industrial cornerstone that provides raw materials for products used in human activities. The major technical shortcomings in solvent extraction are volatile solvent loss, product entrainment leading to secondary pollution, low separation efficiency, and high regeneration energy consumption due to the use of traditional organic solvents with high boiling points as extraction agents. Ionic liquids (ILs), a class of designable functional solvents or materials, have been widely used in chemical separation processes to replace conventional organic solvents after nearly 30 years of rapid development. Herein, we provide a systematic and comprehensive review of the state-of-the-art progress in ILs in the field of extractive hydrocarbon separation (i.e., aromatics extraction, desulfurization, and denitrification) including (i) molecular thermodynamic models of IL systems that enable rapid large-scale screening of IL candidates and phase equilibrium prediction of extraction processes; (ii) structure-property relationships between anionic and cationic structures of ILs and their separation performance (i.e., selectivity and distribution coefficients); (iii) IL-related extractive separation mechanisms (e.g., the magnitude, strength, and sites of intermolecular interactions depending on the separation system and IL structure); and (iv) process simulation and design of IL-related extraction at the industrial scale based on validated thermodynamic models. In short, this Review provides an easy-to-read exhaustive reference on IL-related extractive separation of hydrocarbon mixtures from the multiscale perspective of molecules, thermodynamics, and processes. It also extends to progress in IL analogs, deep eutectic solvents (DESs) in this research area, and discusses the current challenges faced by ILs in related separation fields as well as future directions and opportunities.

A Network of Processes for Biorefining Burdock Seeds and Roots

In this work, a novel sustainable approach was proposed for the integral valorisation of Arctium lappa (burdock) seeds and roots. Firstly, a preliminary recovery of bioactive compounds, including unsaturated fatty acids, was performed. Then, simple sugars (i.e., fructose and sucrose) and phenolic compounds were extracted by using compressed fluids (supercritical CO2 and propane). Consequently, a complete characterisation of raw biomass and extraction residues was carried out to determine the starting chemical composition in terms of residual lipids, proteins, hemicellulose, cellulose, lignin, and ash content. Subsequently, three alternative ways to utilise extraction residues were proposed and successfully tested: (i) enzymatic hydrolysis operated by Cellulases (Thricoderma resei) of raw and residual biomass to glucose, (ii) direct ethanolysis to produce ethyl levulinate; and (iii) pyrolysis to obtain biochar to be used as supports for the synthesis of sulfonated magnetic iron-carbon catalysts (Fe-SMCC) to be applied in the dehydration of fructose for the synthesis of 5-hydroxymethylfurfural (5-HMF). The development of these advanced approaches enabled the full utilisation of this resource through the production of fine chemicals and value-added compounds in line with the principles of the circular economy.

Marine plant-based biorefinery for sustainable 2,5-furandicarboxylic acid production: A review

Marine plants, including macroalgae and seagrass, show promise as biorenewable feedstocks for sustainable chemical manufacturing. This study explores their potential in producing 2,5-furandicarboxylic acid (FDCA), a versatile platform chemical for commodity polymers. FDCA-based polyethylene 2,5-furandicarboxylate offers a sustainable alternative to petroleum-derived polyethylene terephthalate, commonly used in plastic bottles. Our research pioneers the concept of a marine plant-based FDCA biorefinery, introducing innovative approaches for sustainability and cost-effectiveness. This review outlines the use of ionic liquid-based solvents (ILS) and deep eutectic solvent (DES) systems in FDCA production. Additionally, we propose biomodification strategies involving target enzyme-encoding genes to enhance the depolymerization of non-structural storage glucans in marine plants. Our findings pave the way for eco-friendly biorefineries and biorenewable plastics.

Ionenes as Potential Phase Change Materials with Self-Healing Behavior

Ionenes are poly(ionic liquids) (PILs) comprising a polymer backbone with ionic groups along the structure. Ionenes as solid-solid phase change materials are a recent research field, and some studies have demonstrated their potential in thermal dissipation into electronic devices. Eight ionenes obtained through Menshutkin reactions were synthesized and characterized. The analysis of the thermal tests allowed understanding of how the thermal properties of the polymers depend on the aliphatic nature of the dihalogenated monomer and the carbon chain length. The TGA studies concluded that the ionenes were thermally stable with T10% above 420 °C. The DSC tests showed that the prepared ionenes presented solid-solid transitions, and no melting temperature was appreciated, which rules out the possibility of solid-liquid transitions. All ionenes were soluble in common polar aprotic solvents. The hydrophilicity of the synthesized ionenes was studied by the contact angle method, and their total surface energy was calculated. Self-healing behavior was preliminarily explored using a selected sample. Our studies show that the prepared ionenes exhibit properties that make them potential candidates for applications as solid-solid phase change materials.

Application of biodegradable cholinium ionic liquids for the extraction of 5-hydroxymethylfurfural (HMF) from honey

5-Hydroxymethylfurfural (HMF), a Maillard reaction product, can be formed when honey is subjected to heat treatment or a long storage time, becoming volatile and toxic depending on its concentration. The fact that, until today, there is no literature data on the extraction of 5-hydroxymethylfurfural (HMF) from honey using ionic liquids directed the investigation of the influence of biodegradable cholinium ionic liquids on the formation of aqueous biphasic systems and the application of these systems for the extraction of HMF from honey. The influence of anions of synthesised ionic liquids on the construction of biphasic systems in which an inorganic salt was used as a salting agent was investigated. Then, the extraction of HMF in these systems was examined, and the mechanisms of HMF extraction using ionic liquids were explained using computer simulations. Examining the effect of cholinium ionic liquids (choline chloride ([Ch][Cl]), cholinium nicotinate ([Ch][Nic]), cholinium propionate ([Ch][Prop]), and cholinium butyrate ([Ch][But])) on the formation of aqueous biphasic systems by comparing the phase diagrams, it was concluded that the ability of ionic liquids to form an aqueous biphasic system with tripotassium phosphate (K3PO4) decreases in the following order: [Ch][But] ≈ [Ch][Prop] > [Ch][Nic] > [Ch][Cl]. By applying all tested aqueous biphasic systems for the extraction of HMF from honey, an extraction efficiency of more than 89% was achieved. Complete extraction was achieved using the extraction system with [Ch][But], while the weakest ability to extract HMF was exhibited by the system with [Ch][Cl]. The mechanisms of HMF extraction using ionic liquids are explained on the basis of the optimised structures of the ionic liquid systems with HMF, together with the visualisation of non-covalent interactions, and on the basis of the calculated binding energies ΔGbin, which can be used as a good predictor of the extraction potential of newly synthesised ionic liquids.

Synthesis of biofuel precursors from benzaldehyde and cyclopentanone via aldehyde-ketone condensation in a deep eutectic solvent system

Production of biofuel precursors from biomass-derived platform compounds (BDPC) has a profound influence on biofuel industries. Herein, an efficient catalytic system composed of the deep eutectic solvent (DES, i.e., ChCl/Fa) and SnCl4 (ChCl/Fa-SnCl4) was developed to produce biofuel precursors (C12 and C19) through aldehyde-ketone (A-K) condensation of benzaldehyde (BD) and cyclopentanone (CPO). ChCl/Fa-SnCl4 exhibited the prospective catalytic performance and given the high selectivity (SC12 = 49.20%, SC19 = 15.20%) and total yield (YC12+C19 = 64.37%) of C12 and C19, as well as 99.96% BD conversion under the optimized conditions (BD : CPO molar ratio of 1 : 6, ChCl : Fa molar ratio of 1 : 12, 4 mmol SnCl4, 80 °C for 120 min). Subsequently, the C12 and C19 precursors were successfully applied to generate cyclic alkanes (C12H14 and C19H18) by hydrodeoxygenation with selectivity of 37.61% and 24.10%, respectively. Finally, the potential catalytic mechanism was explored by density functional theory (DFT) calculations. The results unveiled that the formation of a stable structure for the ChCl/Fa-SnCl4 system was ascribed to the viable interactions among ChCl, Fa and SnCl4 by coordination bonds, electrostatic interactions and H-bonds, which decreased reaction energy barriers and drove the condensation of BD and CPO. In this case, the catalytic reactions between BD and CPO were enhanced to promote the synthesis of C12 and C19. This work provides a novel strategy for the applicability of different BDPC to synthesize fuel precursors for the development of liquid biofuels.

Ionic Liquids Functionalized MOFs for Adsorption

Metal-organic frameworks (MOFs) and ionic liquids (ILs) represent promising materials for adsorption separation. ILs incorporated into MOF materials (denoted as IL/MOF composites) have been developed, and IL/MOF composites combine the advantages of MOFs and ILs to achieve enhanced performance in the adsorption-based separation of fluid mixtures. The designed different ILs are introduced into the various MOFs to tailor their functional properties, which affect the optimal adsorptive separation performance. In this Perspective, the rational fabrication of IL/MOF composites is presented, and their functional properties are demonstrated. This paper provides a critical overview of an emergent class of materials termed IL/MOF composites as well as the recent advances in the applications of IL/MOF composites as adsorbents or membranes in fluid separation. Furthermore, the applications of IL/MOF in adsorptive gas separations (CO2 capture from flue gas, natural gas purification, separation of acetylene and ethylene, indoor pollutants removal) and liquid separations (separation of bioactive components, organic-contaminant removal, adsorptive desulfurization, radionuclide removal) are discussed. Finally, the existing challenges of IL/MOF are highlighted, and an appropriate design strategy direction for the effective exploration of new IL/MOF adsorptive materials is proposed.

Catalytic Conversion of Carbohydrates into 5-Hydroxymethylfurfural by Phosphotungstic Acid Encapsulated in MIL-101 (Cr, Sn) Catalyst in Deep Eutectic Solvents

Herein, we report the synthesis of bimetal-organic frameworks (BMOFs) with both Brønsted and Lewis acidities, in which phosphotungstic acid (PTA) was encapsulated in BMOFs. It is efficient in converting starch to 5-hydroxymethyl-furfural (HMF) in deep eutectic solvents (DESs) such as choline chloride and formic acid. The highest yield of HMF (37.94%) was obtained using P_0.5/BMOFs_1.0 to catalyze starch in a mixed solvent system comprising DESs and ethyl acetate (EAC) (v/v; 2:3) at 180 °C and a reaction time of 10 min. Employing a DES as a cocatalyst and solvent reduced the use of organic solvents. The catalyst showed adequate reusability, and the HMF yield only decreased by 2.88% after six cycles of reuse compared with that of the initial catalyst. This study demonstrates the application potential of BMOFs in the conversion of biomass to useful molecules with commercial and/or research value.

5-Hydroxymethylfurfural synthesis from fructose over deep eutectic solvents in batch reactors and continuous flow microreactors

Abstract

In this work, a deep eutectic solvent (DES) composed of choline chloride (ChCl) and ethylene glycol (EG) was prepared and applied for the conversion of fructose to 5-hydroxymethylfurfural (HMF), catalyzed by HCl in both laboratory batch reactors and continuous flow microreactors. The effects of reaction temperature, batch time, catalyst loading and molar ratio of ChCl to EG on the fructose conversion and HMF yield were first investigated in the monophasic batch system of ChCl/EG DES. To inhibit HMF-involved side reactions (e.g., its polymerization to humins), methyl isobutyl ketone (MIBK) was used as the extraction agent to form a biphasic system with DES in batch reactors. As a result, the maximum HMF yield could be enhanced at an MIBK to DES volume ratio of 3:1, e.g., increased from 48% in the monophasic DES (with a molar ratio ChCl to EG at 1:3) to 63% in the biphasic system at 80°C and 5 mol% of HCl loading. Based on the optimized results in batch reactors, biphasic experiments were conducted in capillary microreactors under slug flow operation, where a maximum HMF yield of ca. 61% could be obtained in 13 min, which is similar to that in batch under otherwise the same conditions. The slight mass transfer limitation in microreactors was confirmed by performing experiments with microreactors of varying length, and comparing the characteristic mass transfer time and reaction time, indicating further room for improvement.

Highlights

• The efficient fructose conversion to HMF in deep eutectic solvents was achieved in batch reactors and microreactors.

• An HMF yield over 60% could be obtained at a fructose conversion above 90% in both reactors at 80°C within 14 min.

• The HMF yield was enhanced from 48% in the monophasic ChCl/EG system to 63% in the DES-MBIK biphasic system in batch.

• A slight mass transfer limitation was found in the biphasic slug flow microreactor.

Graphical Abstract

Novel Challenges on the Catalytic Synthesis of 5-Hydroxymethylfurfural (HMF) from Real Feedstocks

The depletion of fossil resources makes the transition towards renewable ones more urgent. For this purpose, the synthesis of strategic platform-chemicals, such as 5-hydroxymethylfurfural (HMF), represents a fundamental challenge for the development of a feasible bio-refinery. HMF perfectly deals with this necessity, because it can be obtained from the hexose fraction of biomass. Thanks to its high reactivity, it can be exploited for the synthesis of renewable monomers, solvents, and bio-fuels. Sustainable HMF synthesis requires the use of waste biomasses, rather than model compounds such as monosaccharides or polysaccharides, making its production more economically advantageous from an industrial perspective. However, the production of HMF from real feedstocks generally suffers from scarce selectivity, due to their complex chemical composition and HMF instability. On this basis, different strategies have been adopted to maximize the HMF yield. Under this perspective, the properties of the catalytic system, as well as the choice of a suitable solvent and the addition of an eventual pretreatment of the biomass, represent key aspects of the optimization of HMF synthesis. On this basis, the present review summarizes and critically discusses the most recent and attractive strategies for HMF production from real feedstocks, focusing on the smartest catalytic systems and the overall sustainability of the adopted reaction conditions.

Tetrabutylammonium-chloride-glycerol of deep eutectic solvent functionalized MnO2: a novel mimic enzyme for the quantitative and qualitative colorimetric detection of L-cysteine

L-Cysteine is a common amino acid that plays an important role in human livelihood and production. Therefore, a novel method for the simultaneous quantitative and qualitative determination of L-cysteine by a colorimetric detection system is proposed. As a viable oxidase mimic, [N₄₄₄₄]Cl-G/MnO₂, which consisted of MnO₂ nanosheets functionalized by a tetrabutylammonium chloride-glycerol ([N₄₄₄₄]Cl-G) based deep eutectic solvent (DES) was fabricated. Owing to the oxidation of MnO₂ nanosheets, [N₄₄₄₄]Cl-G/MnO₂ could oxidize the colorless 3,3',5,5'-tetramethylbenzidine (TMB) into a blue product (oxTMB) with the characteristic UV-vis spectrum absorbance at 652 nm. The oxidation of TMB by DES/MnO₂ was inhibited when L-cysteine was introduced, and the absorbance decreased proportionally with the increase in L-cysteine concentration. Due to this inhibition effect, a colorimetric detection system ([N₄₄₄₄]Cl-G/MnO₂-TMB) was developed for the quantitative determination of L-cysteine. Under optimal conditions, the assay showed good linearity over the concentration range of 0.125-2.00 μg mL^-1 with a low detection limit of 5.96 ng mL^-1. A study of the inhibition mechanism demonstrated that the sulfhydryl group of L-cysteine could decompose [N₄₄₄₄]Cl-G/MnO₂ into Mn²⁺, thus limiting the conversion of TMB to oxTMB. In addition, the [N₄₄₄₄]Cl-G/MnO₂-TMB system was used in test strips for the visual qualitative detection of L-cysteine. The selectivity and test strip results demonstrated the high selectivity, simple operation, and rapid response of the [N₄₄₄₄]Cl-G/MnO₂-TMB system for the qualitative detection of L-cysteine. Given the satisfying performance of the detection strategy, colorimetric sensing based on the [N₄₄₄₄]Cl-G/MnO₂-TMB system is considered to have prospective application value in the quantitative and qualitative detection of L-cysteine.

Cholesterol Protects the Liquid-Ordered Phase of Raft Model Membranes from the Destructive Effect of Ionic Liquids

Ionic liquids (ILs), although being a class of promising green solvents, have received many reports on the toxicity to living organisms. In this work, aiming at elucidating the disruptive effect of ILs to cell membrane lipid rafts, we investigated the effect of three 1-octylimidazolium-based ILs on the properties of the liquid ordered phase (L_o, a commonly used lipid raft model) of egg sphingomyelin (SM)-cholesterol model membrane. We found that, in the absence of cholesterol, a very low IL:SM molar ratio of 0.01:1 could disrupt the integrity of the bilayer structure. In sharp contrast, the presence of cholesterol in lipid bilayers helps the L_o phase resist the damaging effect of the ILs. For the role of the IL headgroup, we found that the mono- and trisubstituted species show a stronger destructive effect on the structures of the model rafts than the commonly used disubstituted counterpart.

Progress in Catalytic Conversion of Renewable Chitin Biomass to Furan-Derived Platform Compounds

Chitin is one of the most abundant biopolymers on Earth but under-utilized. The effective conversion of chitin biomass to useful chemicals is a promising strategy to make full use of chitin. Among chitin-derived compounds, some furan derivatives, typically 5-hydroxymethylfurfural and 3-acetamido-5-acetylfuran, have shown great potential as platform compounds in future industries. In this review, different catalytic systems for the synthesis of nitrogen-free 5-hydroxymethylfurfural and nitrogen-containing 3-acetamido-5-acetylfuran from chitin or its derivatives are summarized comparatively. Some efficient technologies for enhancing chitin biomass conversion have been introduced. Last but not least, future challenges are discussed to enable the production of valuable compounds from chitin biomass via greener processes.