Formation of three-dimensional fetal myocardial tissue cultures from rat for long-term cultivation

Three-dimensional microtissues as an in vitro model for personalized radiation therapy

This paper describes the use of 3D microtissues as an intermediate model between the 2D cell culture and the animal model to assess radiation-induced cellular and DNA damage in the context of personalized radiation therapy. An agarose microwell array was used to generate 3D microtissues with controlled size and shape. The microtissues were exposed to X-ray radiation of various doses, and the radiation damage to cells was examined using a variety of techniques with different end points. Damage to cell membranes and reduction in metabolic activity were examined with the MTT assay and dye inclusion assay. DNA damage was tested with the micronucleus assay, γ-H2AX immunostaining, and HaloChip assay. 3D microtissues exposed to X-rays are smaller compared to unexposed ones in extended cultures, indicating that X-ray radiation can retard the growth of cells in 3D microtissues, where cells at the outer shells of microtissues can prevent further damage to those inside.

Microtissues in Cardiovascular Medicine: Regenerative Potential Based on a 3D Microenvironment

More people die annually from cardiovascular diseases than from any other cause. In particular, patients who suffer from myocardial infarction may be affected by ongoing adverse remodeling processes of the heart that may ultimately lead to heart failure. The introduction of stem and progenitor cell-based applications has raised substantial hope for reversing these processes and inducing cardiac regeneration. However, current stem cell therapies using single-cell suspensions have failed to demonstrate long-lasting efficacy due to the overall low retention rate after cell delivery to the myocardium. To overcome this obstacle, the concept of 3D cell culture techniques has been proposed to enhance therapeutic efficacy and cell engraftment based on the simulation of an in vivo-like microenvironment. Of great interest is the use of so-called microtissues or spheroids, which have evolved from their traditional role as in vitro models to their novel role as therapeutic agents. This review will provide an overview of the therapeutic potential of microtissues by addressing primarily cardiovascular regeneration. It will accentuate their advantages compared to other regenerative approaches and summarize the methods for generating clinically applicable microtissues. In addition, this review will illustrate the unique properties of the microenvironment within microtissues that makes them a promising next-generation therapeutic approach.

On-chip radiation biodosimetry with three-dimensional microtissues

This paper reports an image-based, on-chip microtissue radiation biodosimeter that can simultaneously monitor radiation responses of multiple mammalian cell types. The microtissue chip is fabricated by molding molten agarose gel onto microfabricated patterns to form microwells, and seeding a variety of cell suspensions into different microwells inside the agarose gel. The camera of a mobile phone is used to collect images of an array of microtissues, and the color changes of microtissues upon X-ray irradiation allow accurate determination of cell death, which is related to radiation dose. The images can be transferred wirelessly, allowing the biodosimeter to be used for convenient and field deployable monitoring of radiation exposure.

Bone marrow-derived human mesenchymal stem cells express cardiomyogenic proteins but do not exhibit functional cardiomyogenic differentiation potential

Despite their paracrine activites, cardiomyogenic differentiation of bone marrow (BM)-derived mesenchymal stem cells (MSCs) is thought to contribute to cardiac regeneration. To systematically evaluate the role of differentiation in MSC-mediated cardiac regeneration, the cardiomyogenic differentiation potential of human MSCs (hMSCs) and murine MSCs (mMSCs) was investigated in vitro and in vivo by inducing cardiomyogenic and noncardiomyogenic differentiation. Untreated hMSCs showed upregulation of cardiac tropopin I, cardiac actin, and myosin light chain mRNA and protein, and treatment of hMSCs with various cardiomyogenic differentiation media led to an enhanced expression of cardiomyogenic genes and proteins; however, no functional cardiomyogenic differentiation of hMSCs was observed. Moreover, co-culturing of hMSCs with cardiomyocytes derived from murine pluripotent cells (mcP19) or with murine fetal cardiomyocytes (mfCMCs) did not result in functional cardiomyogenic differentiation of hMSCs. Despite direct contact to beating mfCMCs, hMSCs could be effectively differentiated into cells of only the adipogenic and osteogenic lineage. After intramyocardial transplantation into a mouse model of myocardial infarction, Sca-1(+) mMSCs migrated to the infarcted area and survived at least 14 days but showed inconsistent evidence of functional cardiomyogenic differentiation. Neither in vitro treatment nor intramyocardial transplantation of MSCs reliably generated MSC-derived cardiomyocytes, indicating that functional cardiomyogenic differentiation of BM-derived MSCs is a rare event and, therefore, may not be the main contributor to cardiac regeneration.

Evaluation of a thin and mechanically stable collagen cell carrier

The biological function of adherent cell populations strongly depends on the physical and biochemical properties of extracellular matrix molecules. Therefore, numerous biocompatible cell carriers have been developed to specifically influence cell attachment, proliferation, cellular differentiation, and tissue formation for diverse cell culture applications and cell-based therapies. In the present study, we evaluated the mechanical and the cell biological properties of a novel, thin, and planar collagen scaffold. The cell carrier is based on fibrillar bovine collagen type I and exhibits a low material thickness coupled with a high mechanical stability as measured by tensile tests. The influence of this new biomaterial on cell viability, proliferation, and cell differentiation was analyzed using 5-bromo-2-deoxyuridine (BrdU) proliferation assay, immunocytochemistry, water-soluble tetrazolium salt-1 assay (WST-1), live cell imaging, and electron microscopy. Cell culture experiments with the human osteosarcoma cell line Saos-2, human mesenchymal stem cells, and rodent cardiomyocytes demonstrated the in vitro biocompatibility of this chemically noncrosslinked scaffold. Both the mechanical characteristics and the in vitro biocompatibility of this collagen type I carrier facilitate the engineering of thin transferable tissue constructs and offer new possibilities in the fields of cell culture techniques, tissue engineering, and regenerative medicine.

A review of three-dimensional in vitro tissue models for drug discovery and transport studies

The use of animal models in drug discovery studies presents issues with feasibility and ethical concerns. To address these limitations, in vitro tissue models have been developed to provide a means for systematic, repetitive, and quantitative investigation of drugs. By eliminating or reducing the need for animal subjects, these models can serve as platforms for more tightly controlled, high-throughput screening of drugs and for pharmacokinetic and pharmacodynamic analyses of drugs. The focus of this review is three-dimensional (3D) tissue models that can capture cell-cell and cell-matrix interactions. Compared to the 2D culture of cell monolayers, 3D models more closely mimic native tissues since the cellular microenvironment established in the 3D models often plays a significant role in disease progression and cellular responses to drugs. A growing body of research has been published in the literature, which highlights the benefits of the 3D in vitro models of various tissues. This review provides an overview of some successful 3D in vitro models that have been developed to mimic liver, breast, cardiac, muscle, bone, and corneal tissues as well as malignant tissues in solid tumors.

Three-dimensional culture alters primary cardiac cell phenotype

The directed formation of complex three-dimensional (3D) tissue architecture is a fundamental goal in tissue engineering and regenerative medicine. The growth of cells in 3D structures is expected to influence cellular phenotype and function, especially relative cell distribution, expression profiles, and responsiveness to exogenous signals; however, relatively few studies have been carried out to examine the effects of 3D reaggregation on cells from critical target organs, like the heart. Accordingly, we cultured primary cardiac ventricular cells in a 3D model system using a serum-free medium to test the hypothesis that expression profiles, multicellular organizational pathways, tissue maturation markers, and responsiveness to hormone stimulation were significantly altered in stable cell populations grown in 3D versus 2D culture. We found that distinct multi-cellular structures formed in 3D in conjunction with changes in mRNA expression profile, up-regulation of endothelial cell migratory pathways, decreases in the expression of fetal genes (Nppa and Ankrd1), and increased sensitivity to tri-iodothyronine stimulation when compared to parallel 2D cultures comprising the same cell populations. These results indicate that the culture of primary cardiac cells in 3D aggregates leads to physiologically relevant alterations in component cell phenotype consistent with cardiac ventricular tissue formation and maturation.

Gene expression profile of bioreactor-cultured cardiac cells: activation of morphogenetic pathways for tissue engineering

Cells grown in three-dimensional (3D) culture take on in vivo phenotypes and organize into tissue-like structures. Understanding the pathways and mechanisms contributing to this in vitro tissuegenesis is a critical goal of tissue engineering. To identify pathways relevant to cardiac tissue engineering, we compared mRNA expression profiles from bioreactor-cultured 3D aggregates of primary neonatal rat heart cells (NRHCs), which form layered structures similar to cardiac tissue, and standard plate-cultured NRHCs, which do not. In a series of two experiments, NRHCs were grown on solid microcarrier surfaces within clinostatically rotated polytetrafluoroethylene (PTFE) vessels and compared to parallel cultures grown on standard tissue culture plates without rotation. After 1, 4, and 6 days, gene expression profiles were analyzed using Affymetrix Rat Genome U34A (RG-U34A) arrays. The results were validated using real-time PCR, and the data set was filtered to generate a list of 93 probe sets that were substantially the same in replicate samples but substantially different between the bioreactor and plate groups. Cluster analysis indicated that the bioreactor and plate samples had similar expression patterns on day 1 but that these patterns diverged thereafter. Database for Annotation, Visualization, and Integrated Discovery (DAVID) analysis revealed a number of statistically significant gene groupings, including groups associated with muscle development and morphogenesis. Further analysis of the annotated gene list indicated that 13 of the 93 filtered genes were associated with endothelial cells, blood vessels, or angiogenesis. These results suggest that 3D aggregate culture of NRHCs in bioreactors is associated with the differential expression of morphogenic and angiogenic pathways similar to those seen during cardiac development.

The area composita of adhering junctions connecting heart muscle cells of vertebrates – III: Assembly and disintegration of intercalated disks in rat cardiomyocytes growing in culture

For cell and molecular biological studies of heart formation and function cell cultures of embryonal, neonatal or adult hearts of various vertebrates, notably rat and chicken, have been widely used. As the myocardium-specific cell-cell junctions, the intercalated disks (ID), have recently been found to be particularly sensitive to losses of - or mutations in - certain cytoskeletal proteins, resulting in cardiac damages, we have examined the ID organization in primary cultures of cardiomyocytes obtained from neonatal rats. Using immunofluorescence and immunoelectron microscopy, we have studied the major ID components for up to 2 weeks in culture, paying special attention to spontaneously beating, individual cardiomyocytes and myocardial cell colonies. While our results demonstrate the formation of some ID-like cardiomyocyte-connecting junction arrays, they also reveal a variety of structural disorders such as rather extended, junction-free ID regions, sac-like invaginations and endocytotic blebs as well as accumulations of intracytoplasmic structures suggestive of endocytosed forms of junction-derived vesicles or of junction fragments resembling fascia adhaerens elements. Moreover, we have noticed a novel type of small, obviously plaque-free cytoplasmic vesicles containing one or both of the desmosomal cadherins, desmocollin Dsc2 and desmoglein Dsg2. We conclude that cardiomyocyte cultures are useful model systems for studies of certain aspects of myocardiac differentiation and functions but, on the other hand, show progressive disintegration and deterioration. The potential value of molecular markers and reagents in studies of myocardial pathology as well as in the monitoring of myocardial differentiation of so-called stem cells is discussed.