Silicon-Assisted Direct Covalent Grafting on Metal Oxide Surfaces: Synthesis and Characterization of Carboxylate N,N′-Ligands on TiO2

Soybean Oil Epoxidation Catalyzed by a Functionalized Metal–Organic Framework with Active Dioxo-Molybdenum (VI) Centers

In this work, a functionalized gallium metal–organic framework with active dioxo-molybdenum (VI) centers was evaluated as a catalyst in the epoxidation of soybean oil using tert-butyl-hydroperoxide as an oxidizing agent. The influence of the reaction time, temperature, and concentration of the oxidizing agent was studied, and it was demonstrated that the highest epoxide selectivity was obtained at 110 °C after 4 h of reaction (29% conversion and 91% selectivity) using a soybean oil/oxidizing agent ratio of 1/2. The stability of the metal–organic framework was confirmed by infrared spectroscopy, X-ray powder diffraction, thermogravimetric analysis, scanning electron microscopy, and energy-dispersive X-ray spectroscopy EDS. The stability tests demonstrated that the catalyst could be reused in the catalytic process for the recovery of vegetable oils.

Graphical Abstract

Selective and Efficient Olefin Epoxidation by Robust Magnetic Mo Nanocatalysts

Iron oxide magnetic nanoparticles were synthesized with different sizes (11 and 30 nm). Subsequently they were shelled with a silica layer allowing grafting of an organic phosphine ligand that coordinated to the [MoI2(CO)3] organometallic core. The silica layer was prepared by the Stöber method using either mechanical (both 11 and 30 nm nanoparticles) or ultrasound (30 nm only) stirring. The latter nanoparticles once coated with silica were obtained with less aggregation, which was beneficial for the final material holding the organometallic moiety. The Mo loadings were found to be 0.20, 0.18, and 0.34 mmolMo·g−1 for MNP30-Si-phos-Mo,MNP11-Si-phos-Mo, and MNP30-Sius-phos-Mo, respectively, with the ligand-to-metal ratio reaching 4.6, 4.8, and 3.2, by the same order, confirming coordination of the Mo moieties to two phos ligands. Structural characterization obtained from powder X-ray diffraction (XRD), scanning electron microscopy (SEM)/ transmission electron microscopy (TEM) analysis, and Fourier-transform infrared (FTIR) spectroscopy data confirmed the successful synthesis of all nanomaterials. Olefin epoxidation of several substrates catalyzed by these organometallic nano-hybrid materials using tert-butyl hydroperoxide (tbhp) as oxidant, achieved very good results. Extensive testing of the catalysts showed that they are highly active, selective, recyclable, and efficient concerning oxidant consumption.

An environmentally friendly route for grafting of molybdenum carbonyl onto a diaminosilane-modified SBA-15 molecular sieve and its catalytic behaviour in olefin epoxidation

Molybdenum carbonyl (Mo(CO)₆) grafted onto a diaminosiloxane functionalized SBA-15 surface and showed promising activity for epoxidation of olefins.

Covalent modification of photoanodes for stable dye-sensitized solar cells

This paper describes the surface modification of TiO2 with 3-aminopropyltriethoxysilane (APTES) followed by covalent attachment of Ru-based N719 dye molecules to TiO2 through an amide linkage for use as photoanodes (PAs) in dye-sensitized solar cells (DSSCs). Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) confirms the surface chemistry between the TiO2 and dye. The photovoltaic efficiency of DSSCs with covalently linked dye is very similar (6-7%) to that of traditionally prepared DSSCs prepared by direct immersion when both have similar dye coverage. Importantly, the efficiency of PAs with covalently linked dye did not change after storage for more than 60 days in air, whereas the traditionally prepared PAs decreased dramatically after 1 day and lost most of their efficiency after a week. FTIR and UV-vis characterization of the dye suggests that covalent linkage improves stability by preventing the loss of the thiocyanato ligands and/or tetrabutylammonium cations on the dye. PAs with covalently linked dye are also more stable toward water, acid, heat, and UV light compared to traditionally prepared PAs and are more stable compared to other modified PAs with dye attached through electrostatic or hydrogen-bonding interactions.