Synthetic Routes and Plasmonic Properties of Noble Metal Nanoplates

Two-dimensional copper based colloidal nanocrystals: synthesis and applications

Two-dimensional (2D) semiconductor nanocrystals display unconventional physical and opto-electronic properties due to their ultrathin and unique electronic structures. Since the success of Cd-based photoemissive nanocrystals, the development of sustainable and low-cost nanocrystals with enhanced electronic and physical properties has become a central research theme. In this context, copper-based semiconductor 2D nanocrystals, the cost-effective and eco-friendly alternative, exhibit unique plasmonic resonance, transport properties, and high ionic conductivity beneficial for sensing, energy storage, conversion, and catalytic applications. This review summarizes recent progress in the colloidal synthesis, growth mechanisms, properties, and applications of 2D copper-based nanostructures with tunable compositions, dimensions, and crystal phases. We highlight the growth mechanisms concerning their shape evolution in two dimensions. We analyse the effectiveness of cation exchange as a tool to synthesize multinary nanocrystals. Based on the preparation of Cu-based chalcogenide and non-chalcogenide compositions, we discuss synthesis control achieved via colloidal approaches to allow dimension tunability, phase engineering, and plasmonic and thermoelectric property optimization. Furthermore, their potential in various applications of catalysis, energy storage, and sensing is reviewed. Finally, we address the current challenges associated with 2D Cu-based nanocrystal development and provide an outlook pertaining to unexplored research areas.

Plasmonically Modulated Gold Nanostructures for Photothermal Ablation of Bacteria

With the wide utilization of antibiotics, antibiotic-resistant bacteria have been often developed more frequently to cause potential global catastrophic consequences. Emerging photothermal ablation has been attracting extensive research interest for quick/effective eradication of pathogenic bacteria from contaminated surroundings and infected body. In this field, anisotropic gold nanostructures with tunable size/morphologies have been demonstrated to exhibit their outstanding photothermal performance through strong plasmonic absorption of near-infrared (NIR) light, efficient light to heat conversion, and easy surface modification for targeting bacteria. To this end, this review first introduces thermal treatment of infectious diseases followed by photothermal therapy via heat generation on NIR-absorbing gold nanostructures. Then, the usual synthesis and spectral features of diversified gold nanostructures and composites are systematically overviewed with the emphasis on the importance of size, shape, and composition to achieve strong plasmonic absorption in NIR region. Further, the innovated photothermal applications of gold nanostructures are comprehensively demonstrated to combat against bacterial infections, and some constructive suggestions are also discussed to improve photothermal technologies for practical applications.

Seeded growth of silver nanoplates with rough edges and their applications for SERS

Silver nanoplates with rough edges have been successfully fabricated via seeded growth by manipulating surface diffusion and kinetics-controlled growth.

High yield synthesis and surface chemistry exchange of small gold hexagonal nanoprisms

A new seed-mediated synthesis of AuHNPs in high yield is described using hydroquinone as a weak reductant and poly(vinylpyrrolidone) as a shape-directing additive.

Self-Assembly of Uniform Branched Gold Nanoparticles Induced by Using Thiol-Terminated Poly(ethylene glycol)

Branched gold nanoparticles with a sufficiently monodisperse distribution of size and shape were successfully synthesised using a tree-type multi-amine-head surfactant (C18N3) with a 100% yield using a seed-mediated method. C18N3 coated branched gold nanoparticles possess a positive zeta potential of ~40eV, which can keep branched gold nanoparticles stable in aqueous solution for several months without precipitation and transfiguration. However, C18N3 molecules were partially replaced by thiol-terminated poly(ethylene glycol) (mPEG-SH), due to the branched morphology of the as prepared gold nanoparticles, to make branched gold nanoparticles passivated by the adsorbing polymer with a positive zeta potential (17eV). The mPEG-SH passivated branched gold nanoparticles behaved as quasi-hard particles to overcome the restrictions of the rotational and positional degrees of freedom in neighbouring nanoparticles at high volume fractions, which favours the hydrophilic thiol-terminated poly(ethylene glycol) polymer passivated branched gold nanoparticles to self-arrange into close-packed 2D ensembles. Thus, the as prepared branched gold nanoparticles and their ensembles possess significant potential in bio-labelling, imaging, biosensing, therapeutic applications, and surface-enhanced Raman scattering.

Femtosecond laser direct writing of ion exchangeable multifunctional microstructures

We report on the fabrication of ion exchangeable microstructures by femtosecond laser direct writing of an ion exchange photopolymer, poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS). The resultant microstructures are negatively charged in aqueous solution, and can adsorb positively charged species, such as metal ions, nanoparticles, and proteins by electrostatic interaction, forming functional components for chip functionalization. In addition, it is possible to modify the microstructures with positively charged species that make the microstructures sensitive to negatively charged species. As a typical example, a crossed 3D microvessel functionalized with antibodies was fabricated, which reveals great potential for organ-on-a-chip systems. The fabrication of ion exchangeable microstructures holds great promise for flexible chip functionalization.

Multifunctional Photonic Nanomaterials for Diagnostic, Therapeutic, and Theranostic Applications

The last decade has seen dramatic progress in the principle, design, and fabrication of photonic nanomaterials with various optical properties and functionalities. Light-emitting and light-responsive nanomaterials, such as semiconductor quantum dots, plasmonic metal nanoparticles, organic carbon, and polymeric nanomaterials, offer promising approaches to low-cost and effective diagnostic, therapeutic, and theranostic applications. Reasonable endeavors have begun to translate some of the promising photonic nanomaterials to the clinic. Here, current research on the state-of-the-art and emerging photonic nanomaterials for diverse biomedical applications is reviewed, and the remaining challenges and future perspectives are discussed.

Synthesis and optical properties of gold nanorods with controllable morphology

Searching for architectural building blocks with tunable morphology and peculiarity is a prominent challenge for novel diagnostic and therapeutic applications. Here, the aqueous-based seed-mediated methods for preparing highly mono-dispersed Au nanorods with a different aspect ratio are systematically studied by controlling the amounts of Ag ions and seeds. We also explore the effect of pH on the synthesis of gold nanorods. The realization of the overlap of longitudinal plasmon band and excitation source with different degrees is made by changing the aspect ratio of nanorod in order to determine its effect on the overall surface enhancement. In addition, the gold octahedra are prepared by overgrowth on Au nanorods. The SERS effects of Au nanorods are researched and the FDTD simulations are performed to reveal the morphology induced plasmon modes.

Surface Coating by Gold Nanoparticles on Functional Polymers: On-Demand Portable Catalysts for Suzuki Reactions

We have developed new functionalized polymers capable of being easily coated by gold nanoparticles, uniformly distributed on the surface of the polymers, by simply adding a gold(III) solution in water to the polymers. The polymer-supported gold nanoparticle material was used as an efficient portable and reusable catalyst for Suzuki reactions in mixed organic-aqueous solvents.

Differential role of PVP on the synthesis of plasmonic gold nanostructures and their catalytic and SERS properties

Differential role of PVP modified with halide ions has been meticulously studied for in situ tuning of Au nanoparticle growth utilizing XRD measurements together with FTIR data, thus quantifying their catalysis and SERS applications.

Facile and Scalable Preparation of Solid Silver Nanoparticles (<10 nm) for Flexible Electronics

Metal conductive ink for flexible electroncs has exhibited a promising future recently. Here, an innovative strategy was reported to synthesize silver nanocolloid (2.5±0.5 nm) and separate solid silver nanoparticles (<10 nm) effectively. Specifically, silver nitrate (AgNO3) was used as a silver precursor, sodium borohydride (NaBH4) as a reducing agent, fatty acid (CnH2n+1COOH) as a dispersant agent, and ammonia (NH3·H2O) and hydrochloride (HCl) as a pH regulator and complexing agent in aqueous solution. The main mechanism is the solubility changes of fatty acid salts (CnH2n+1COO-NH4+) and fatty acid (CnH2n+1COOH) coated on the synthesized silver nanoparticles (NPs) in aqueous solution. This change determines the suspension and precipitation of silver NPs directly. The results show that when n in dispersant is 12 and molar ratio (C12H24O2/AgNO3) is 1.0, the separation yield of silver NPs is up to 94.8%. After sintering at 125 °C for 20 min, the as-prepared conductive silver nanoink (20 wt %) presents a satisfactory resistivity (as low as 6.6 μΩ·cm on the polyester-PET substrate), about 4 times the bulk silver. In addition, the efficacy of the as-prepared conductive ink was verified with the construction of a radio frequency antenna by inkjet printing and conductive character pattern (Fudan-Fudan) by direct wiring, showing excellent electrical performance.

New insights into the side-face structure, growth aspects, and reactivity of Ag(n) nanoprisms

We report an improved synthesis of colloidal Ag(n) nanoprisms using carboxyl compounds (citrate or succinate) and long chain macromolecules (polyvinylpyrrolidone (PVP)). The side-facet structure of the triangular nanostructure was determined in detail using electron tomography in scanning transmission mode (3D STEM) and HRTEM. It has been found that they are built up by {100} facets with a single parallel twin plane. The best conditions for producing uniform Ag nanoprisms with tunable sizes and high yields in the presence of carboxyl compounds additive system are described, and a growth mechanism is proposed. This approach provides also a route to synthesize Ag nanodisks and Au-Ag alloyed nanoprisms.

Coating fabrics with gold nanorods for colouring, UV-protection, and antibacterial functions

Gold nanorods exhibit rich colours owing to the nearly linear dependence of the longitudinal plasmon resonance wavelength on the length-to-diameter aspect ratio. This property of Au nanorods has been utilized in this work for dyeing fabrics. Au nanorods of different aspect ratios were deposited on both cotton and silk fabrics by immersing them in Au nanorod solutions. The coating of Au nanorods makes the fabrics exhibit a broad range of colours varying from brownish red through green to purplish red, which are essentially determined by the longitudinal plasmon wavelength of the deposited Au nanorods. The colorimetric values of the coated fabrics were carefully measured for examining the colouring effects. The nanorod-coated cotton fabrics were found to be commercially acceptable in washing fastness to laundering tests and colour fastness to dry cleaning tests. Moreover, the nanorod-coated cotton and silk fabrics show significant improvements on both UV-protection and antibacterial functions. Our study therefore points out a promising approach for the use of noble metal nanocrystals as dyeing materials for textile applications on the basis of their inherent localized plasmon resonance properties.

In situ synthesis of gold nanoparticles in exponentially-growing layer-by-layer films

In situ synthesis of inorganic nanoparticles (NPs) in polyelectrolytes multilayers (PEMs) has recently gained much attention. Due to the versatility of their composition, PEMs offer a unique opportunity to synthesize a variety of NPs. So far, mostly cationic precursors have been used and only few studies have investigated the possibility of using amine groups to bind anionic precursors. Here, we use exponentially growing poly(L-lysine)/hyaluronan (PLL/HA) films as a nanoreservoir to bind and sequester aurochlorate (AuCl(4)(-)) anions thanks to the large number of free amine groups. The polypeptide-polysaccharide reactive template enabled the formation in a spatially-confined environment of gold NP at a very high yield. The synthesized gold NPs were homogenous and well-dispersed in the nanocomposite. Importantly, there was no particular effect of the film-ending layer (either PLL or HA). The largest particles of ~9 nm and the largest amount of gold were obtained at acidic pH of 3. When the pH was increased, smaller and more numerous NPs were synthesized but the total amount of gold was lower. Based on UV-visible spectrometry, FTIR and TEM data, we finally propose a scheme for the mechanism of gold NPs formation, in which several groups of PLL and HA contribute to the binding of gold ions, the nucleation and growth of NPs, and their stabilization in the "bulk" of the film.

A solution to the PEG dilemma: efficient bioconjugation of large gold nanoparticles for biodiagnostic applications using mixed layers

Gold nanoparticles are of high interest in the biodiagnostic and bioimaging field owing to their unique optical properties such as localized surface plasmon resonance (LSPR) and high Rayleigh scattering efficiency in the visible range. Although biofunctionalization is a prerequirement prior to their integration in diagnostic procedures, aggregation-free conjugation of biomacromolecules to large gold nanoparticle is not trivial. Here, a robust and simple method based on commercially available reactants is reported for the efficient biofunctionalization of gold nanoparticles with sizes ranging from 15 to 175 nm. It is demonstrated that mixed poly(ethylene glycol) (PEG) layers, prepared using specific ratios of low- and high-molecular-weight PEG chains, can be conjugated to proteins and monoclonal antibodies using standard carbodiimide chemistry without detectable aggregation. The properties of the mixed PEG interlayer modified gold nanoparticles were investigated using UV-vis spectrometer, dynamic light scattering, and X-ray photoelectron spectroscopy, which demonstrated the importance of controlling biointerfacial properties. Using the epithelial cell adhesion molecule (EpCAM) as a model target antigen, the benefit of the mixed PEG layers over coatings prepared using high-molecular-weight PEG chains only is demonstrated in vitro using bright field microscopy and reflectance confocal microscopy. Very high binding affinity to breast cancer cells was obtained for the mixed PEG layers. This robust procedure demonstrates that, under optimal conditions, a compromise can be achieved between the excellent steric protection provided by thick PEG adlayers and the high bioconjugation yields afforded by adlayers from low-molecular-weight tethers.

Formation and plasmonic response of self-assembled layers of colloidal gold nanorods and branched gold nanoparticles

The plasmonic properties of self-assembled layers of rod- and branched-shaped gold nanoparticles were investigated using optical techniques. Nanoparticles were synthesized by a surfactant-guided, seed-mediated growth method. The layers were obtained by gradual assembly of nanoparticles at the interface between a polar and a nonpolar solvent and were transferred to a glass slide. Polarization and angle-dependent extinction measurements showed that the layers made of gold nanorods were governed by an effective medium response. The response of the layers made by branched gold particles was characterized by random light scattering. Microscopic mapping of the spatial mode structure demonstrates a uniform optical response of the nanoparticle layers down to a submicrometer length scale.

Adsorption and detection of sport doping drugs on metallic plasmonic nanoparticles of different morphology

A comparative study of different plasmonic nanoparticles with different morphologies (nanospheres and triangular nanoprisms) and metals (Ag and Au) was done in this work and applied to the ultrasensitive detection of aminoglutethimide (AGI) drug by surface enhanced Raman spectroscopy (SERS) and plasmon resonance. AGI is an aromatase inhibitor used as an antitumoral drug with remarkable pharmacological interest and also in illegal sport doping. The application of very sensitive spectroscopic techniques based on the localization of an electromagnetic field on plasmonic nanoparticles confirms the previous study of the adsorption of drugs onto a metal surface due to the near field character of these techniques. The adsorption of AGI on the above substrates was investigated at different pH values and surface coverages, and the results were analyzed on the basis of AGI/metal affinity, considering the interaction mechanism, the existence of two binding sites in AGI, and the influence of the interface on the adsorption in terms of surface charge due to the presence of other ions linked to the surface. Finally, a comparative quantitative detection of AGI was performed on both spherical and triangular nanoprism nanoparticles, and a limit of detection lower than those reported so far was deduced on the latter nanoparticles.

From nano to micro: synthesis and optical properties of homogeneous spheroidal gold particles and their superlattices

Iodide ions have been used as an additive to fabricate homogeneous gold spheres with a la carte dimensions, ranging from the nano- (50 nm) to the microscale (ca. 1 μm). Due to the high uniformity and surface functionalization of the produced materials, they undergo spontaneous assembly into organized superlattices upon solvent drying. Thus, optical properties of the particles including localized surface plasmon resonances and surface enhanced Raman scattering (SERS) response, both in solution and organized into superlattices, are also reported.

Enhanced Raman spectrum of lawsone on Ag surface: vibrational analyses, frequency shifts, and molecular geometry

The surface-enhanced Raman spectrum of lawsone, a well known natural dye, has been investigated. Activation with KNO(3) or Na(2)SO(4) solution was necessary to enhance the Raman signal, whereas addition of NaCl solution depletes the effects. In the enhanced Raman spectrum, the strong double-bond stretching bands are most distinctive and show large red shifts from those in the infrared and FT-Raman spectra. The observed strong double-bond stretching bands reflect lawsone coordinated perpendicular to the Ag surface. DFT computations have been carried out for the plausible configurations of lawsone coordinated to an adatom on the Ag surface. Lawsone coordinated to an Ag(+) adatom with H(+) released best reproduces the observed vibrational characteristics.

The controlled display of biomolecules on nanoparticles: a challenge suited to bioorthogonal chemistry

Interest in developing diverse nanoparticle (NP)-biological composite materials continues to grow almost unabated. This is motivated primarily by the desire to simultaneously exploit the properties of both NP and biological components in new hybrid devices or materials that can be applied in areas ranging from energy harvesting and nanoscale electronics to biomedical diagnostics. The utility and effectiveness of these composites will be predicated on the ability to assemble these structures with control over NP/biomolecule ratio, biomolecular orientation, biomolecular activity, and the separation distance within the NP-bioconjugate architecture. This degree of control will be especially critical in creating theranostic NP-bioconjugates that, as a single vector, are capable of multiple functions in vivo, including targeting, image contrast, biosensing, and drug delivery. In this review, a perspective is given on current and developing chemistries that can provide improved control in the preparation of NP-bioconjugates. The nanoscale properties intrinsic to several prominent NP materials are briefly described to highlight the motivation behind their use. NP materials of interest include quantum dots, carbon nanotubes, viral capsids, liposomes, and NPs composed of gold, lanthanides, silica, polymers, or magnetic materials. This review includes a critical discussion on the design considerations for NP-bioconjugates and the unique challenges associated with chemistry at the biological-nanoscale interface-the liabilities of traditional bioconjugation chemistries being particularly prominent therein. Select bioorthogonal chemistries that can address these challenges are reviewed in detail, and include chemoselective ligations (e.g., hydrazone and Staudinger ligation), cycloaddition reactions in click chemistry (e.g., azide-alkyne cyclyoaddition, tetrazine ligation), metal-affinity coordination (e.g., polyhistidine), enzyme driven modifications (e.g., HaloTag, biotin ligase), and other site-specific chemistries. The benefits and liabilities of particular chemistries are discussed by highlighting relevant NP-bioconjugation examples from the literature. Potential chemistries that have not yet been applied to NPs are also discussed, and an outlook on future developments in this field is given.

Localized surface plasmon resonance: nanostructures, bioassays and biosensing--a review

Localized surface plasmon resonance (LSPR) is an optical phenomena generated by light when it interacts with conductive nanoparticles (NPs) that are smaller than the incident wavelength. As in surface plasmon resonance, the electric field of incident light can be deposited to collectively excite electrons of a conduction band, with the result being coherent localized plasmon oscillations with a resonant frequency that strongly depends on the composition, size, geometry, dielectric environment and separation distance of NPs. This review serves to describe the physical theory of LSPR formation at the surface of nanostructures, and the potential for this optical technology to serve as a basis for the development bioassays and biosensing of high sensitivity. The benefits and challenges associated with various experimental designs of nanoparticles and detection systems, as well as creative approaches that have been developed to improve sensitivity and limits of detection are highlighted using examples from the literature.

Painting by numbers: nanoparticle-based colorants in the post-empirical age

The visual appearance of the artificial world is largely governed by films or composites containing particles with at least one dimension smaller than a micron. Over the past century and a half, the optical properties of such materials have been scrutinized and a broad range of colorant products, based mostly on empirical microstructural improvements, developed. With the advent of advanced synthetic approaches capable of tailoring particle shape, size and composition on the nanoscale, the question of what is the optimum particle for a certain optical property can no longer be answered solely by experimentation. Instead, new and improved computational approaches are required to invert the structure-function relationship. This progress report reviews the development in our understanding of this relationship and indicates recent examples of how theoretical design is taking an ever increasingly important role in the search for enhanced or multifunctional colorants.