Assembly of a Pentagonal Polyoxomolybdate Building Block, [Mo 6 O 21 ] 6- , into Crystalline MoV Oxides

Structure Transformation of Methylammonium Polyoxomolybdates via In-Solution Acidification and Solid-State Heating from Methylammonium Monomolybdate and Application as Negative Staining Reagents for Coronavirus Observation

We prepared polyoxomolybdates with methylammonium countercations from methylammonium monomolybdate, (CH3NH3)2[MoO4], through two dehydrative condensation methods, acidifying in the aqueous solution and solid-state heating. Discrete (CH3NH3)10[Mo36O112(OH)2(H2O)14], polymeric ((CH3NH3)8[Mo36O112(H2O)14])n, and polymeric ((CH3NH3)4[γ-Mo8O26])n were selectively isolated via pH control of the aqueous (CH3NH3)2[MoO4] solution. The H2SO4-acidified solution of pH < 1 produced "sulfonated α-MoO3", polymeric ((CH3NH3)2[(MoO3)3(SO4)])n. The solid-state heating of (CH3NH3)2[MoO4] in air released methylamine and water to produce several methylammonium polyoxomolybdates in the sequence of discrete (CH3NH3)8[Mo7O24-MoO4], discrete (CH3NH3)6[Mo7O24], discrete (CH3NH3)8[Mo10O34], and polymeric ((CH3NH3)4[γ-Mo8O26])n, before their transformation into molybdenum oxides such as hexagonal-MoO3 and α-MoO3. Notably, some of their polyoxomolybdate structures were different from polyoxomolybdates produced from ammonium molybdates, such as (NH4)2[MoO4] or (NH4)6[Mo7O24], indicating that countercation affected the polyoxomolybdate structure. Moreover, among the tested polyoxomolybdates, (CH3NH3)6[Mo7O24] was the best negative staining reagent for the observation of the SARS-CoV-2 virus using transmission electron microscopy.

Reversible and rapid calcium intercalation into molybdenum vanadium oxides

Looming concerns regarding scarcity, high prices, and safety threaten the long-term use of lithium in energy storage devices. Calcium has been explored in batteries because of its abundance and low cost, but the larger size and higher charge density of calcium ions relative to lithium impairs diffusion kinetics and cyclic stability. In this work, an aqueous calcium-ion battery is demonstrated using orthorhombic, trigonal, and tetragonal polymorphs of molybdenum vanadium oxide (MoVO) as a host for calcium ions. Orthorhombic and trigonal MoVOs outperform the tetragonal structure because large hexagonal and heptagonal tunnels are ubiquitous in such crystals, providing facile pathways for calcium-ion diffusion. For trigonal MoVO, a specific capacity of ∼203 mAh g^-1 was obtained at 0.2C and at a 100 times faster rate of 20C, an ∼60 mAh g^-1 capacity was achieved. The open-tunnel trigonal and orthorhombic polymorphs also promoted cyclic stability and reversibility. A review of the literature indicates that MoVO provides one of the best performances reported to date for the storage of calcium ions.

Preparation of zeolitic bismuth vanadomolybdate using a ball-shaped giant polyoxometalate for olefin epoxidation

Bismuth vanadomolybdate-based zeolitic octahedral metal oxide was synthesized from {Mo72V30} and used as a heterogeneous catalyst for olefin epoxidation.

Design and synthesis of highly active MoVTeNb-oxides for ethane oxidative dehydrogenation

Ethane oxidative dehydrogenation (ODH) is an alternative route for ethene production. Crystalline M1 phase of Mo-V mixed metal oxide is an excellent catalyst for this reaction. Here we show a hydrothermal synthesis method that generates M1 phases with high surface areas starting from poorly soluble metal oxides. Use of organic additives allows control of the concentration of metals in aqueous suspension. Reactions leading to crystalline M1 take place at 190 °C, i.e., approximately 400 °C lower than under current synthesis conditions. The evolution of solvated polyoxometalate ions and crystalline phases in the solid is monitored by spectroscopies. Catalysts prepared by this route show higher ODH activity compared to conventionally prepared catalysts. The higher activity is due not only to the high specific surface area but also to the corrugated lateral termination of the M1 crystals, as seen by atomic resolution electron microscopy, exposing a high concentration of catalytically active sites.

Crystalline M1 phase of Mo-V-Te-Nb mixed oxide is an excellent catalyst for ethane oxidative dehydrogenation to ethene. Here, the authors show a method that synthesizes highly active materials by generating M1 crystals with corrugated terminations, thus exposing a large concentration of active sites.

Towards 3D Mapping of BO6 Octahedron Rotations at Perovskite Heterointerfaces, Unit Cell by Unit Cell

The rich functionalities in the ABO3 perovskite oxides originate, at least in part, from the ability of the corner-connected BO6 octahedral network to host a large variety of cations through distortions and rotations. Characterizing these rotations, which have significant impact on both fundamental aspects of materials behavior and possible applications, remains a major challenge at heterointerfaces. In this work, we have developed a unique method to investigate BO6 rotation patterns in complex oxides ABO3 with unit cell resolution at heterointerfaces, where novel properties often emerge. Our method involves column shape analysis in ABF-STEM images of the ABO3 heterointerfaces taken in specific orientations. The rotating phase of BO6 octahedra can be identified for all three spatial dimensions without the need of case-by-case simulation. In several common rotation systems, quantitative measurements of all three rotation angles are now possible. Using this method, we examined interfaces between perovskites with distinct tilt systems as well as interfaces between tilted and untilted perovskites, identifying an unusual coupling behavior at the CaTiO3/LSAT interface. We believe this method will significantly improve our knowledge of complex oxide heterointerfaces.

Better Catalysts through Microscopy: Mesoscale M1/M2 Intergrowth in Molybdenum-Vanadium Based Complex Oxide Catalysts for Propane Ammoxidation

In recent decades, catalysis research has transformed from the predominantly empirical field to one where it is possible to control the catalytic properties via characterization and modification of the atomic-scale active centers. Many phenomena in catalysis, such as synergistic effect, however, transcend the atomic scale and also require the knowledge and control of the mesoscale structure of the specimen to harness. In this paper, we use our discovery of atomic-scale epitaxial interfaces in molybdenum-vanadium based complex oxide catalysts systems (i.e., Mo-V-M-O, M = Ta, Te, Sb, Nb, etc.) to achieve control of the mesoscale structure of this complex mixture of very different active phases. We can now achieve true epitaxial intergrowth between the catalytically critical M1 and M2 phases in the system that are hypothesized to have synergistic interactions, and demonstrate that the resulting catalyst has improved selectivity in the initial studies. Finally, we highlight the crucial role atomic scale characterization and mesoscale structure control play in uncovering the complex underpinnings of the synergistic effect in catalysis.

Polyoxometalate based open-frameworks (POM-OFs)

Polyoxometalate-based open frameworks (POM-OFs) are extended architectures incorporating metal-oxide cluster units and comprise an emergent family of materials with a large diversity of topologies, structural flexibility and functionality at the nanoscale.