Mineral matrix deposition of MC3T3-E1 pre-osteoblastic cells exposed to silicocarnotite and nagelschmidtite bioceramics: In vitro comparison to hydroxyapatite

This work presents the effect of the silicocarnotite (SC) and nagelschmidtite (Nagel) phases on in vitro osteogenesis. The known hydroxyapatite of biological origin (BHAp) was used as a standard of osteoconductive characteristics. The evaluation was carried out in conventional and osteogenic media for comparative purposes to assess the osteogenic ability of the bioceramics. First, the effect of the material on cell viability at 24 h, 7 and 14 days of incubation was evaluated. In addition, cell morphology and attachment on dense bioceramic surfaces were observed by fluorescence microscopy. Specifically, alkaline phosphatase (ALP) activity was evaluated as an osteogenic marker of the early stages of bone cell differentiation. Mineralized extracellular matrix was observed by calcium phosphate deposits and extracellular vesicle formation. Furthermore, cell phenotype determination was confirmed by scanning electron microscope. The results provided relevant information on the cell attachment, proliferation, and osteogenic differentiation processes after 7 and 14 days of incubation. Finally, it was demonstrated that SC and Nagel phases promote cell proliferation and differentiation, while the Nagel phase exhibited a superior osteoconductive behavior and could promote MC3T3-E1 cell differentiation to a higher extent than SC and BHAp, which was reflected in a higher number of deposits in a shorter period for both conventional and osteogenic media.

Effect of Magnesium Substitution on Structural Features and Properties of Hydroxyapatite

Hydroxyapatite (HAP) is the main mineral component of bones and teeth. It is widely used in medicine as a bone filler and coating for implants to promote new bone growth. Ion substitutions into the HAP structure highly affect its properties. One of the most important substituents is magnesium. This paper presents new results obtained using high-precision hybrid density functional theory calculations for Mg/Ca substitutions in HAP in a wide magnesium concentration range within a 2 × 2 × 2 supercell model. Experimental data on the mechanochemical synthesis of HAP-Mg samples with different Mg concentrations are also presented. A comparison between the experiment and the theory showed good agreement: the HAP-Mg unit cell parameters and volume decreased with increasing degree of Mg/Ca substitution. The changes in the distances between the Ca and O, Ca and H, and Mg and O ions upon Mg/Ca substitution in different calcium positions was analyzed. The resulting asymmetry and distortion of the cell parameters were evaluated. It was shown that bulk modulus, energy levels, and band gap depend on the degree of Mg substitutions in the Ca1 and Ca2 positions. The formation energies of Mg/Ca substitutions showed non-monotonic behavior that was different for Ca1 and Ca2 positions. The Ca2 position had a slightly higher probability (~5 meV/f.u.) of substitution than Ca1 position at a Mg concentration x = 0.5. At x = 1, substitution in both positions can coexist. The simulated IR spectra for different Mg/Ca substitutions showed that Mg in the Ca2 position changes the IR spectrum more significantly than Mg in the Ca1 position. Similar changes were recorded in the IR spectra of the synthesized samples. The electronic structure is shown to be sensitive to the number and position of substitutions, which may be used to tweak the optical properties of the HAP-Mg material.

Hydroxyapatite Double Substituted with Zinc and Silicate Ions: Possibility of Mechanochemical Synthesis and In Vitro Properties

In this study, the mechanochemical synthesis of substituted hydroxyapatite (HA) containing zinc and silicon ions having a chemical formula of Ca_10-xZn_x(PO₄)_6-x(SiO₄)_x(OH)_2-x, where x = 0.2, 0.6, 1.0, 1.5, and 2.0, was carried out. The synthesized materials were characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and inductively coupled plasma spectroscopy. We found that HA co-substituted with zinc and silicate formed up to x = 1.0. At higher concentrations of the substituents, the formation of large amounts of an amorphous phase was observed. The cytotoxicity and biocompatibility of the co-substituted HA was studied in vitro on Hek293 and MG-63 cell lines. The HA co-substituted with zinc and silicate demonstrated high biocompatibility; the lowest cytotoxicity was observed at x = 0.2. For this composition, good proliferation of MG-63 osteoblast-like cells and an increased solubility compared with that of HA were detected. These properties allow us to recommend the synthesized material for medical applications, namely, for the restoration of bone tissue and manufacture of biodegradable implants.

Diffusion of Copper Ions in the Lattice of Substituted Hydroxyapatite during Heat Treatment

The doping of hydroxyapatite with various substituent ions can give this material new and useful properties. Nonetheless, local distortions of structure after doping can change the properties of the material. In this work, the thermal stability of copper-substituted hydroxyapatite synthesized by the mechanochemical method was investigated. In situ diffraction analyses showed that copper ion diffusion during the heating of Cu-substituted hydroxyapatite promotes phase transformations in the substituted hydroxyapatite. The behavior of copper ions was studied in samples with ratios (Ca + Cu)/P = 1.75 and 1.67. It was found that in both cases, single-phase Cu-substituted hydroxyapatite with the general formula Ca_10-xCu_x(PO₄)_6-y(CO₃)_y(OH)_2-yO_y is formed by the mechanochemical synthesis. When heated at approximately 600-700 °C, the lattice loses copper cations, but at higher temperatures, CuO diffusion into the hydroxyl channel takes place. Cuprate-substituted hydroxyapatite with the general formula Ca₁₀(PO₄)₆(OH)_2-2x(CuO₂)_x forms in this context. At 1200 °C, the sample is single-phase at (Ca + Cu)/P = 1.75. Nonetheless, slow cooling of the material leads to the emergence of a CuO phase, as in the case of (Ca + Cu)/P = 1.67, where the material contains not only CuO but also Cu-substituted tricalcium phosphate. In the manufacture of ceramic products from Cu-substituted hydroxyapatite, these structural transformations must be taken into account, as they alter not only thermal but also biological properties of such materials.

Preparation of Silicon Hydroxyapatite Nanopowders under Microwave-Assisted Hydrothermal Method

The synthesis of partially substituted silicon hydroxyapatite (Si-HAp) nanopowders was systematically investigated via the microwave-assisted hydrothermal process. The experiments were conducted at 150 °C for 1 h using TMAS (C₄H₁₃NO₅Si₂) as a Si⁴⁺ precursor. To improve the Si⁴⁺ uptake in the hexagonal structure, the Si precursor was supplied above the stoichiometric molar ratio (0.2 M). The concentration of the TMAS aqueous solutions used varied between 0.3 and 1.8 M, corresponding to saturation levels of 1.5–9.0-fold. Rietveld refinement analyses indicated that Si incorporation occurred in the HAp lattice by replacing phosphate groups (PO₄³⁻) with the silicate (SiO₄⁻) group. FT-IR and XPS analyses also confirmed the gradual uptake of SiO₄⁻ units in the HAp, as the saturation of Si⁴⁺ reached 1.8 M. TEM observations confirmed that Si-HAp agglomerates had a high crystallinity and are constituted by tiny rod-shaped particles with single-crystal habit. Furthermore, a reduction in the particle growth process took place by increasing the Si⁴⁺ excess content up to 1.8 M, and the excess of Si⁴⁺ triggered the fine rod-shaped particles self-assembly to form agglomerates. The agglomerate size that occurred with intermediate (0.99 mol%) and large (12.16 mol%) Si contents varied between 233.1 and 315.1 nm, respectively. The excess of Si in the hydrothermal medium might trigger the formation of the Si-HAp agglomerates prepared under fast kinetic reaction conditions assisted by the microwave heating. Consequently, the use of microwave heating-assisted hydrothermal conditions has delivered high processing efficiency to crystallize Si-HAp with a broad content of Si⁴⁺.

Radiographic and clinical outcomes of silicate-substituted calcium phosphate (SiCaP) bone grafts in spinal fusion: Systematic review and meta-analysis

Pseudarthrosis continues to affect a nontrivial proportion of spine fusion patients. Given its ties to poorer patient outcomes and high reoperation rates, there remains great interest in interventions aimed at reducing the rates of nonunion. Recently, silicate-substituted calcium phosphate (SiCaP) bone grafts have been suggested to improve fusion rates, yet there exists no systematic review of the body of evidence for SiCaP grafts. Here, we present the first such review along with a meta-analysis of the effect of SiCaP bone grafts on fusion rates. Using the PubMed, Embase, and Web of Science databases, we queried the English-language literature for all studies examining the effect of SiCaPs on spinal fusion. Primary endpoints were: 1) radiographic fusion rate at last follow-up and 2) postoperative improvements in Visual Analog Scale (VAS) pain scores and Oswestry Disability Index (ODI) at last follow-up. Meta-analyses were performed for each endpoint using random effects. Ten articles (694 patients treated with SiCaP bone grafts) were included. Among SiCaP-treated patients, 93% achieved radiographic fusion (range: 79-100%), with comparable rates across subgroups. Meta-analysis of the three randomized controlled trials demonstrated no difference in fusion rates between SiCaP-treated patients and patients receiving grafts with recombinant human bone morphogenetic protein-2 (rhBMP-2) (OR: 1.11; p = 0.83). Patients treated with SiCaP bone grafts experienced significant improvements in VAS back pain (-3.3 points), VAS leg pain (-4.8 points), and ODI (-31.6 points) by last follow-up (p < 0.001 for each). Additional high-quality research is needed to evaluate the relative cost-effectiveness of SiCaP bone grafts in spinal fusion.

Zn- or Cu-Containing CaP-Based Coatings Formed by Micro-arc Oxidation on Titanium and Ti-40Nb Alloy: Part I-Microstructure, Composition and Properties

Zn- and Cu-containing CaP-based coatings, obtained by micro-arc oxidation process, were deposited on substrates made of pure titanium (Ti) and novel Ti-40Nb alloy. The microstructure, phase, and elemental composition, as well as physicochemical and mechanical properties, were examined for unmodified CaP and Zn- or Cu-containing CaP coatings, in relation to the applied voltage that was varied in the range from 200 to 350 V. The unmodified CaP coatings on both types of substrates had mainly an amorphous microstructure with a minimal content of the CaHPO₄ phase for all applied voltages. The CaP coatings modified with Zn or Cu had a range from amorphous to nano- and microcrystalline structure that contained micro-sized CaHPO₄ and Ca(H₂PO₄)₂·H₂O phases, as well as nano-sized β-Ca₂P₂O₇, CaHPO₄, TiO₂, and Nb₂O₅ phases. The crystallinity of the formed coatings increased in the following order: CaP/TiNb < Zn-CaP/TiNb < Cu-CaP/TiNb < CaP/Ti < Zn-CaP/Ti < Cu-CaP/Ti. The increase in the applied voltage led to a linear increase in thickness, roughness, and porosity of all types of coatings, unlike adhesive strength that was inversely proportional to an increase in the applied voltage. The increase in the applied voltage did not affect the Zn or Cu concentration (~0.4 at%), but led to an increase in the Ca/P atomic ratio from 0.3 to 0.7.

Lanthanum-silicate-substituted apatite synthesized by fast mechanochemical method: Characterization of powders and biocoatings produced by micro-arc oxidation

Lanthanum-silicate substituted apatite with equal concentrations of the substituents in the range of 0.2-6.0 mol were produced by a fast method - mechanochemical synthesis. This method makes it possible to synthesize a nanosized single-phase product by activating reaction mixtures containing CaHPO₄, CaO, La(OH)₃ and SiO₂·H₂O for 25-30 min in AGO-2 and AGO-3 planetary mills. The structure of the apatites was investigated by the FTIR and XRD methods. It was found that the synthesized samples with substituent concentrations up to 2 mol are substituted oxy-hydroxyapatites, at higher concentrations, they are substituted oxyapatites. The mechanochemically synthesized apatite with a substituent concentration of 0.5 mol was used for depositing biocoatings on titanium substrates by the micro-arc oxidation method. The structure of the coatings is mainly amorphous. In vitro biological tests demonstrated high biocompatibility of the coatings and the absence of cytotoxic action on mesenchymal stem cells.

3D biodegradable scaffolds of polycaprolactone with silicate-containing hydroxyapatite microparticles for bone tissue engineering: high-resolution tomography and in vitro study

To date, special interest has been paid to composite scaffolds based on polymers enriched with hydroxyapatite (HA). However, the role of HA containing different trace elements such as silicate in the structure of a polymer scaffold has not yet been fully explored. Here, we report the potential use of silicate-containing hydroxyapatite (SiHA) microparticles and microparticle aggregates in the predominant range from 2.23 to 12.40 µm in combination with polycaprolactone (PCL) as a hybrid scaffold with randomly oriented and well-aligned microfibers for regeneration of bone tissue. Chemical and mechanical properties of the developed 3D scaffolds were investigated with XRD, FTIR, EDX and tensile testing. Furthermore, the internal structure and surface morphology of the scaffolds were analyzed using synchrotron X-ray µCT and SEM. Upon culturing human mesenchymal stem cells (hMSC) on PCL-SiHA scaffolds, we found that both SiHA inclusion and microfiber orientation affected cell adhesion. The best hMSCs viability was revealed at 10 day for the PCL-SiHA scaffolds with well-aligned structure (~82%). It is expected that novel hybrid scaffolds of PCL will improve tissue ingrowth in vivo due to hydrophilic SiHA microparticles in combination with randomly oriented and well-aligned PCL microfibers, which mimic the structure of extracellular matrix of bone tissue.

A comparison study between electrospun polycaprolactone and piezoelectric poly(3-hydroxybutyrate-co-3-hydroxyvalerate) scaffolds for bone tissue engineering

In this study, bone scaffolds composed of polycaprolactone (PCL), piezoelectric poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and a combination of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and silicate containing hydroxyapatite (PHBV-SiHA) were successfully fabricated by a conventional electrospinning process. The morphological, chemical, wetting and biological properties of the scaffolds were examined. All fabricated scaffolds are composed of randomly oriented fibres with diameters from 800nm to 12μm. Fibre size increased with the addition of SiHA to PHBV scaffolds. Moreover, fibre surface roughness in the case of hybrid scaffolds was also increased. XRD, FTIR and Raman spectroscopy were used to analyse the chemical composition of the scaffolds, and contact angle measurements were performed to reveal the wetting behaviour of the synthesized materials. To determine the influence of the piezoelectric nature of PHBV in combination with SiHA nanoparticles on cell attachment and proliferation, PCL (non-piezoelectric), pure PHBV, and PHBV-SiHA scaffolds were seeded with human mesenchymal stem cells (hMSCs). In vitro study on hMSC adhesion, viability, spreading and osteogenic differentiation showed that the PHBV-SiHA scaffolds had the largest adhesion and differentiation abilities compared with other scaffolds. Moreover, the piezoelectric PHBV scaffolds have demonstrated better calcium deposition potential compared with non-piezoelectric PCL. The results of the study revealed pronounced advantages of hybrid PHBV-SiHA scaffolds to be used in bone tissue engineering.

Solid-state NMR and computational insights into the crystal structure of silicocarnotite-based bioceramic materials synthesized mechanochemically

In this work, we report the results of a detailed structural study of a promising bioceramic material silicocarnotite Ca₅(PO₄)₂SiO₄ (SC) synthesized from mechanochemically treated nanosized silicon-substituted hydroxyapatite by annealing at 1000°C. This novel synthetic approach represents an attractive and efficient route towards large-scale manufacturing of the silicocarnotite-based bioceramics. A combination of solid-state nuclear magnetic resonance (NMR), powder X-ray crystallography and density function theory (DFT) calculations has been implemented to characterize the phase composition of the prepared composite materials and to gain insight into the crystal structure of silicocarnotite. The phase composition analysis based on the multinuclear solid-state NMR has been found in agreement with X-ray powder diffraction indicating the minority phases of CaO (5-6wt%) and residual silicon-apatite (7-8wt%), while the rest of the material being a fairly crystalline silicocarnotite phase (86-88wt%). A combination of computational (CASTEP) and experimental methods was used to address the anionic site disorder in the silicocarnotite crystal structure. Distorted [OPO₃] pyramids have appeared as an important structural motif in the SC crystal structure. The ratio between regular [PO₄] and distorted [OPO₃] tetrahedra is found between 2:1 and 3:1 based on XRD experiments and CASTEP calculations. The natural abundance ⁴³Ca magic angle spinning NMR spectra of silicocarnotite are reported for the first time.