Hexagonal-Prism-Shaped Optical Sensor/Captor for the Optical Recognition and Sequestration of PdIIIons from Urban Mines

Ultrasensitive Visual Tracking of Toxic Cyanide Ions in Biological Samples Using Biocompatible Metal-Organic Frameworks Architectures

The extraordinary accumulation of cyanide ions within biological cells is a severe health risk. Detecting and tracking toxic cyanide ions within these cells by simple and ultrasensitive methodologies are of immense curiosity. Here, continuous tracking of ultimate levels of CN--ions in HeLa cells was reported employing biocompatible branching molecular architectures (BMAs). These BMAs were engineered by decorating colorant-laden dendritic branch within and around the molecular building hollows of the geode-shelled nanorods of organic-inorganic Al-frameworks. Batch-contact methods were utilized to assess the potential of hollow-nest architecture for inhibition/evaluation of toxicant CN--ions within HeLa cells. The nanorod BMAs revealed significant potential capabilities in monitoring and tracking of CN- ions (88 parts per trillion) in biological trials within seconds. These results demonstrated sufficient evidence for the compatibility of BMAs during HeLa cell exposure. Under specific conditions, the BMAs were utilized for in-vitro fluorescence tracking/sensing of CN- in HeLa cells. The cliff swallow nest with massive mouths may have the potential to reduce the health hazards associated with toxicant exposure in biological cells.

Cubically cage-shaped mesoporous ordered silica for simultaneous visual detection and removal of uranium ions from contaminated seawater

A dual-function organic-inorganic mesoporous structure is reported for naked-eye detection and removal of uranyl ions from an aqueous environment. The mesoporous sensor/adsorbent is fabricated via direct template synthesis of highly ordered silica monolith (HOM) starting from a quaternary microemulsion liquid crystalline phase. The produced HOM is subjected to further modifications through growing an organic probe, omega chrome black blue G (OCBBG), in the cavities and on the outer surface of the silica structure. The spectral response for [HOM-OCBBG → U(VI)] complex shows a maximum reflectance at λ_max = 548 nm within 1 min response time (t_R); the LOD is close to 9.1 μg/L while the LOQ approaches 30.4 μg/L, and this corresponds to the range of concentration where the signal is linear against U(VI) concentration (i.e., 5-1000 μg/L) at pH 3.4 with standard deviation (SD) of 0.079 (RSD% = 11.7 at n = 10). Experiments and DFT calculations indicate the existence of strong binding energy between the organic probe and uranyl ions forming a complex with blue color that can be detected by naked eyes even at low uranium concentrations. With regard to the radioactive remediation, the new mesoporous sensor/captor is able to reach a maximum capacity of 95 mg/g within a few minutes of the sorption process. The synthesized material can be regenerated using simple leaching and re-used several times without a significant decrease in capacity.

Inorganic-organic mesoporous hybrid segregators for selective and sensitive extraction of precious elements from urban mining

This study aimed to develop a highly selective extraction protocol for gold (Au^III) ions from electronic urban waste (EUW) using simple, low-cost Inorganic-organic mesoporous hybrid segregators. The unique features of mesoporous hybrid segregator architectures are of particular to ensure effective adsorption system in terms of selective and sensitive recovery of Au^III ions from EUW. The segregator platform featured 3D micrometric, mesocage double-serrated plant-leaf-like γ-Al₂O₃ sheets with hierarchy surfaces containing tri-modal mesopores interiorly and uniformly arranged toothed edges of ~20-40 and ~15 nm groove width and depth at the exterior surfaces, respectively. Rational incorporation of actively organic chelates into hierarchical γ-Al₂O₃ sheet platforms leads to the production of a couple of selective segregators 1 and 2 (namely, SC1 and SC2) for Au^III ions at specific conditions by applying batch and fixed-bed columnar techniques. The mesocage SC segregators offer a selective extraction approach of Au^III ions from mixed element contents released from a computer motherboard (CMB). Our finding indicated that the textural and hierarchal features of the mesocage SC segregators played key roles in the selective adsorption/recovery of Au^III ions at pH 2-2.5 with high capacity (136-141 mg/g range) and effective reusability ≫10 consecutive cycles. In general, the developed SCs could be utilized as a real extractor of Au^III recovery from spent CMBs.

Mesoscopic engineering materials for visual detection and selective removal of copper ions from drinking and waste water sources

The monitoring and removal of abundant heavy metals such as Cu ions are considerable global concerns because of their severe impact on the health of humans and other living organisms. To meet this global challenge, we engineered a novel mesoscopic capture protocol for the highly selective removal and visual monitoring of copper (Cu²⁺) ions from wide-ranging water sources. The capture hierarchy carriers featured three-dimensional, microsized MgO mesoarchitecture rectangular sheet-like mosaics that were randomly built in horizontal and vertical directions, uniformly arranged sheet faces, corners, and edges, smoothly quadrilateral surface coverage for strong Cu²⁺-to-ligand binding exposure, and multidiffusible pathways. The Cu²⁺ ion-selectively active captor surface design was engineered through the simple incorporation/encapsulation of a synthetic molecular chelation agent into hierarchical mesoporous MgO rectangular sheet platforms to produce a selective, visual mesoscopic captor (VMC). The nanoscale VMC dressing of MgO rectangular mosaic hierarchy by molecularly electron-enriched chelates with actively double core bindings of azo- and sulfonamide- groups and hydrophobic dodecyl tail showed potential to selectively trap and efficiently remove ultratrace Cu²⁺-ions with an extreme removal capability of ~233 mg/g from watery solutions, such as drinking water, hospital effluent, and food-processing wastewater at specific pH values. In addition to the Cu²⁺ ion-selective removal, the VMC design enabled the continuous visual monitoring of ultratrace Cu²⁺ ions (~3.35 × 10^-8 M) as a consequence of strong chelate-to-Cu²⁺ binding events among all accumulated matrices in water sources. Our experimental recycle protocol provided evidence of reusability and recyclability of VMC (≥10 cycles). With our mesoscopic capture protocol, the VMC can be a promising candidate for the selective decontamination/removal and sensitive detection of hazardous inorganic pollutants from different water sources with indoor or outdoor applications.

One-step synthesis of boron-doped graphene quantum dots for fluorescent sensors and biosensor

Heteroatom doping can endow graphene quantum dots (GQDs) with various new or improved structural, optical and physicochemical properties. In contrast to the widely reported oxygen, nitrogen or sulfur doping in GQDs, simple and scalable synthesis of boron-doped GQDs (B-GQDs) with high yield and quantum yields remains challenge. In this work, B-GQDs are one-step synthesized and serve as the fluorescence probes for the fabrication of sensors towards Fe³⁺ ion or phosphate (Pi) as well as biosensor towards cytochrome C (Cyt C). The B-GQDs are facile synthesized using one-step bottom-up molecular fusion between 1,3,6-trinitropyrene and borax in sodium hydroxide under hydrothermal process. The synthesis can be performed using large volume autoclave (500 ml) with a high yield of 71%, indicating possibility for gram-scale production of B-GQDs. The as-prepared B-GQDs exhibit single or bilayer graphene structure, high crystallinity, uniform size, bright (absolute photoluminescence quantum yield of 16.8%) and excitation-independent green fluorescence (maximum excitation wavelength and emission wavelength of 480 nm and 520 nm, respectively). Successful doping of B atoms in the lattice of GQDs enables high selectivity towards Fe³⁺. Based on quenching of fluorescence of B-GQDs by Fe³⁺ (turn-off model), detection of Fe³⁺ (with limit of detection-LOD of 31.2 nM) and Fe³⁺-rich Cyt C (with LOD of 5.9 μg/ml) are demonstrated. As Pi can recover Fe³⁺-quenched fluorescence of B-GQDs (turn-off-on model), indirect fluorescent detection of Pi is also achieved with LOD of 340 nM. In addition, detection of Fe³⁺, Cyt C and Pi in real samples is achieved.

Metal-Ion Displacement Approach for Optical Recognition of Thorium: Application of a Molybdenum(VI) Complex for Nanomolar Determination and Enrichment of Th(IV)

An azine-based molybdenum (Mo(VI)) complex (M1) is exploited for selective detection of thorium (Th(IV)) ions through a metal-ion displacement protocol. Th(IV) displaces Mo(VI) from M1 instantly leading to the formation of the Th(IV) complex, having orange-red emission. Consequently, a red shift of the emission wavelength along with 41-fold fluorescence enhancement is observed. This unique method allows detection of Th(IV) as low as 1.5 × 10^-9 M. The displacement of Mo(VI) from M1 by Th(IV) is established by spectroscopic studies and kinetically followed by the stopped-flow technique. The displacement binding constant for Th(IV) is notably strong, 4.59 × 10⁶ M^-1. Extraction of Th(IV) from aqueous solution to the ethyl acetate medium using M1 has been achieved. The silica-immobilized M1 efficiently enriches Th(IV) from its reservoir through solid-phase extraction. Computational studies (density functional theory) support experimental findings.

Fabrication of calix[4]arene-attached mesoporous ammonium molybdophosphate–silica hybrid and its application as an adsorbent for cesium ions

The cesium cation is a common contaminant in medical and industrial products as well as in nuclear wastes, and it can present a serious risk to human health.

One-Pot Fabrication of Dendritic NiO@carbon-nitrogen Dot Electrodes for Screening Blood Glucose Level in Diabetes

Selective and sensitive glucose sensors with fast response for screening diabetic blood level are demanded. In this paper, the one-pot nanoarchitecture of dendritic NiO@carbon-nitrogen (C-N) dots (designated as NCD) sphere-wrapping Ni foam electrodes are reported as an effective and sensitive glucose sensor in blood samples. In this construction design, the NCD sphere electrode with excessive surface defects, large fractions of catalytic active sites, high surface area, and mobility of electron transfer through the actively surface NCD sphere can massively enhance the electrocatalytic activity for nonenzymatic glucose detection in diabetic blood. This portable sensor enables highly sensitive recognition of glucose detection (≈0.01 × 10^-6 m) over a wider linear range (≈0.005-12 × 10^-3 m) with rapid response time of a few seconds. The key result is that the engineered NCD sphere electrodes function as simple, easy-to-use electrochemical sensing assays of glucose levels in diabetic blood patients with a wide range of precision or linearity, recyclability, and excellent selectivity, even in the presence of potentially interfering organic (ascorbic acid, uric acid, dopamine, lactose, maltose, and sucrose) and inorganic (NaCl, Na₂ SO₄ , KCl, and K₂ SO₄ ) species. The results demonstrate the potential for the electrochemical sensors to be used in preventing serious health problems associated with diabetes mismanagement.

Nanomembrane Canister Architectures for the Visualization and Filtration of Oxyanion Toxins with One-Step Processing

Nanomembrane canister-like architectures were fabricated by using hexagonal mesocylinder-shaped aluminosilica nanotubes (MNTs)-porous anodic alumina (PAA) hybrid nanochannels. The engineering pattern of the MNTs inside a 60 μm-long membrane channel enabled the creation of unique canister-like channel necks and cavities. The open-tubular canister architecture design provides controllable, reproducible, and one-step processing patterns of visual detection and rejection/permeation of oxyanion toxins such as selenite (SeO3(2-)) in aquatic environments (i.e., in ground and river water sources) in the Ibaraki Prefecture of Japan. The decoration of organic ligand moieties such as omega chrome black blue (OCG) into inorganic Al2O3@tubular SiO2/Al2O3 canister membrane channel cavities led to the fabrication of an optical nanomembrane sensor (ONS). The OCG ligand was not leached from the canister as observed in washing, sensing, and recovery assays of selenite anions in solution, which enabled its multiple reuse. The ONS makes a variety of alternate processing analyses of selective quantification, visual detection, rejection/permeation, and recovery of toxic selenite quick and simple without using complex instrumentation. Under optimal conditions, the ONS canister exhibited a high selectivity toward selenite anions relative to other ions and a low-level detection limit of 0.0093 μM. Real analytical data showed that approximately 96% of SeO3(2-) anions can be recovered from aquatic and wastewater samples. The ONS canister holds potential for field recovery applications of toxic selenite anions from water.

One-pot layer casting-guided synthesis of nanospherical aluminosilica@organosilica@alumina core–shells wrapping colorant dendrites for environmental application

Wrapping of dendritic colorant aggregates around core–double shell cavities afforded a container vehicle tracking architecture for recovering toxins in environments.

Modeling of spherical silver nanoparticles in silicone-based nanocomposites for marine antifouling

A non-toxic foul-release model of silicone/spherical AgNP hybrid nanocomposites with enhanced hydrophobicity, self-cleaning, and marine fouling release performance.

Synthesis of SBA-15 encapsulated ammonium molybdophosphate using Qaidam natural clay and its use in cesium ion adsorption

The ordered hexagonal mesoporous silica (SBA-15) encapsulated ammonium molybdophosphate (AMP) was successfully synthesized using low-grade natural clay from Qaidam Basin as silica and aluminum source, through a one-pot synthesis method.