Synthesis and Catalytic Activity of Molybdenum-Nitride Complexes Bearing Pincer Ligands

(Electro)chemical N2 Splitting by a Molybdenum Complex with an Anionic PNP Pincer-Type Ligand

Molybdenum(III) complexes bearing pincer-type ligands are well-known catalysts for N2-to-NH3 reduction. We investigated herein the impact of an anionic PNP pincer-type ligand in a Mo(III) complex on the (electro)chemical N2 splitting ([LMoCl3]-, 1 -, LH = 2,6-bis((di-tert-butylphosphaneyl)methyl)-pyridin-4-one). The increased electron-donating properties of the anionic ligand should lead to a stronger degree of N2 activation. The catalyst is indeed active in N2-to-NH3 conversion utilizing the proton-coupled electron transfer reagent SmI2/ethylene glycol. The corresponding Mo(V) nitrido complex 2H exhibits similar catalytic activity as 1H and thus could represent a viable intermediate. The Mo(IV) nitrido complex 3 - is also accessible by electrochemical reduction of 1 - under a N2 atmosphere. IR- and UV/vis-SEC measurements suggest that N2 splitting occurs via formation of an "overreduced" but more stable [(L(N2)2Mo0)2μ-N2]2- dimer. In line with this, the yield in the nitrido complex increases with lower applied potentials.

Catalytic Ammonia Synthesis Mediated by Molybdenum Complexes with PN3P Pincer Ligands: Influence of P/N Substituents and Molecular Mechanism

Three molybdenum trihalogenido complexes supported by different PN³P pincer ligands were synthesized and investigated regarding their activity towards catalytic N₂-to-NH₃ conversion. The highest yields were obtained with the H-PN³P^tBu ligand. The corresponding Mo(V)-nitrido complex also shows good catalytic activity. Experiments regarding the formation of the analogous Mo(IV)-nitrido complex lead to the conclusion that the mechanism of catalytic ammonia formation mediated by the title systems does not involve N-N cleavage of a dinuclear Mo-dinitrogen complex, but follows the classic Chatt cycle.

Electronic insights into aminoquinoline-based PNHN ligands: protonation state dictates geometry while coordination environment dictates N-H acidity and bond strength

A variety of transition metal complexes bearing aminoquinoline PN^HH'-R ligands R = Ph (L1H), Cy (L2H) and their amido analogues are reported for rhodium(I) ([Rh(L1H)(PPh₃)]⁺1 and Rh(L1)(PPh₃) 2), cobalt(II) (Co(L2)(Cl) 3), and iron(II) ([Fe(L1H)₂]²⁺5, Fe(L1)₂6, and [Fe(C₅Me₅)(L1H)]PF₆7). The acid-base and redox properties of the amido complexes 2, 6, and their protio parent complexes 1, and 5 permit the determination of the pK_a and bond dissociation free energy (BDFE) of their N-H bonds while the ligand scaffold is coordinated to metal centres of square planar and octahedral geometry, respectively. From relative concentrations obtained by the use of ³¹P{¹H} NMR spectroscopy, a pK_a^THF value of 14 is calculated for rhodium complex 1, 6.4 for iron complex 5, and 24 for iron complex 7. These data, when combined with elecrochemical potentials obtained via cyclic voltammetry, allow the calculations of BDFE values for the N-H bond of 69 kcal mol^-1 for 1, and of 55 kcal mol^-1 for 5.

Reduction of highly bulky triphenolamine molybdenum nitrido and chloride complexes

Transition metal nitrides are key intermediates in the catalytic reduction of dinitrogen to ammonia. To date, transition metal nitride complexes with the triphenolamine (TPA) ligand have not been reported and the system with the ligand has been much less studied for ammonia formation compared with other systems. Herein, we report a series of molybdenum complexes supported by a sterically demanding TPA ligand, including a nitrido complex NMo(TPA). We achieved the stoichiometric conversion of the nitride moiety into ammonia under ambient conditions by adding proton and electron sources to NMo(TPA). However, the catalytic turnover for N₂ reduction to ammonia was not observed in the triphenolamine ligand system unlike the Schrock system-triamidoamine ligand. Density functional theory calculation revealed that the molybdenum center favors binding NH₃ over N₂ by 16.9 kcal mol^-1 and the structural lability of the trigonal bipyramidal (TBP) molybdenum complex seems to prevent catalytic turnover. Our systematic study showed that the electronegativity and bond length of ancillary ligands determine the preference between N₂ and NH₃, suggesting a systematic design strategy for improvement.

Comprehensive insights into synthetic nitrogen fixation assisted by molecular catalysts under ambient or mild conditions

N2 is fixed as NH3 industrially by the Haber-Bosch process under harsh conditions, whereas biological nitrogen fixation is achieved under ambient conditions, which has prompted development of alternative methods to fix N2 catalyzed by transition metal molecular complexes. Since the early 21st century, catalytic conversion of N2 into NH3 under ambient conditions has been achieved by using molecular catalysts, and now H2O has been utilized as a proton source with turnover frequencies reaching the values found for biological nitrogen fixation. In this review, recent advances in the development of molecular catalysts for synthetic N2 fixation under ambient or mild conditions are summarized, and potential directions for future research are also discussed.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Catalytic N2-to-NH3 (or -N2H4) Conversion by Well-Defined Molecular Coordination Complexes

Nitrogen fixation, the six-electron/six-proton reduction of N₂, to give NH₃, is one of the most challenging and important chemical transformations. Notwithstanding the barriers associated with this reaction, significant progress has been made in developing molecular complexes that reduce N₂ into its bioavailable form, NH₃. This progress is driven by the dual aims of better understanding biological nitrogenases and improving upon industrial nitrogen fixation. In this review, we highlight both mechanistic understanding of nitrogen fixation that has been developed, as well as advances in yields, efficiencies, and rates that make molecular alternatives to nitrogen fixation increasingly appealing. We begin with a historical discussion of N₂ functionalization chemistry that traverses a timeline of events leading up to the discovery of the first bona fide molecular catalyst system and follow with a comprehensive overview of d-block compounds that have been targeted as catalysts up to and including 2019. We end with a summary of lessons learned from this significant research effort and last offer a discussion of key remaining challenges in the field.

Protonation Studies of Molybdenum(VI) Nitride Complexes That Contain the [2,6-(ArNCH2)2NC5H3]2- Ligand (Ar = 2,6-Diisopropylphenyl)

[Ar₂N₃]Mo(N)(O- t-Bu) (1), which contains the conformationally rigid pyridine-based diamido ligand [2,6-(ArNCH₂)₂NC₅H₃]^2- (Ar = 2,6-diisopropylphenyl), is a catalyst for the reduction of dinitrogen with protons and electrons. Various acids have been added in order to explore where and how the first proton adds to the complex. The addition of adamantol to 1 produces a five-coordinate bis(adamantoxide), [HAr₂N₃]Mo(N)(OAd)₂ (2a), in which one of the amido nitrogens in the ligand has been protonated and the resulting aniline nitrogen in the [HAr₂N₃]^- ligand is not bound to the metal. The addition of [Ph₂NH₂][OTf] to 1 produces {[HAr₂N₃]Mo(N)(O- t-Bu)}(OTf) (3), in which an amido nitrogen has been protonated, but the aniline in the [HAr₂N₃]^- ligand remains bound to the metal. Last, the addition of (2,6-lutidinium)BAr^F₄ (BAr^F₄ = {B(3,5-(CF₃)₂C₆H₃)₄}^-) to 1 yields {[Ar₂N₃]Mo(N)(LutH)(O- t-Bu)}BAr^F₄, in which LutH⁺ is hydrogen-bonded to the nitride in the solid state and in dichloromethane with K_eq = 412 ± 94 and Δ G = -3.6 ± 0.8 kcal at 22 °C. A similar hydrogen-bonded adduct was formed through the addition of (2-methylpyridinium)BAr^F₄ to 1, but the addition of (pyridinium)BAr^F₄ to 1 leads to the formation of (inter alia) {[HAr₂N₃]Mo(N)(O- t-Bu)}(BAr^F₄), in which the amide nitrogen has been protonated. The addition of cobaltocene to 3 or {[Ar₂N₃]Mo(N)(LutH)(O- t-Bu)}(BAr^F₄) leads only to the re-formation of 1. X-ray structural studies were carried out on 2a, 3, and {[Ar₂N₃]Mo(N)(LutH)(O- t-Bu)}(BAr^F₄).

PNN′ & P2NN′ ligands via reductive amination with phosphine aldehydes: synthesis and base-metal coordination chemistry

Phosphorus-donor “arms” are readily added to amines in order to enable sturdy base metal coordination.

Molybdenum Complexes that Contain a Calix[6]azacryptand Ligand as Catalysts for Reduction of N2 to Ammonia

[CAC(OMe)₆]Mo(N) (3, where [CAC]^3- is a calix[6]azacryptand ligand derived from a [6]calixarene) has been prepared in a reaction between Li₃[CAC(OMe)₆] and ( t-BuO)₃Mo(N). An X-ray structural study showed 3 to have a structure similar to that of [HIPTN₃N]Mo(N) (where [HIPTN₃N]^3- is [(3,5-(2,4,6-triisopropylphenyl)₂C₆H₃NCH₂CH₂)₃N]^3-). The relatively rigid [CAC(OMe)₆]^3- ligand in 3 forms a bowl-shaped cavity defined by a 24-atom macrocyclic ring. The Mo-N_amido-C_ipso angles are ∼8° smaller in 3 than they are in [HIPTN₃N]Mo(N). Methoxides on the three linking units point into the cavity above the nitride in 3, whereas the three methoxides on phenyl rings attached to the amido nitrogen atoms point away from the cavity. An analogous [CAC(OMe)₃(H)₃]Mo(N) complex (9) was prepared in which the three methoxides pointing into the cavity in 3 have been replaced by protons. Its structure differs little from that of 3. The nitride could be protonated in 3 to give {[CAC(OMe)₆]Mo(NH)}⁺, which could be reduced (reversibly) to [CAC(OMe)₆]Mo(NH). Catalytic reduction of molecular nitrogen under a variety of conditions with either Ph₂NH₂OTf or HBArf (BArf^- = {B[3,5(CF₃)₂C₅H₃]₄}^-) as the acid and a Co metallocene or KC₈ as the reducing agent between -78 and 22 °C in diethyl ether shows that 1.20-1.34 equivalents of ammonia are formed starting with either [CAC(OMe)₆]Mo(N) (50% ¹⁵N) or [CAC(OMe)₃(H)₃]Mo(N) (50% ¹⁵N).

Non-symmetric pincer ligands: complexes and applications in catalysis

Pincer ligands have become ubiquitous in organometallic chemistry and homogeneous catalysis. Recently, new varieties of pincer ligands with non-symmetrical backbones and/or ligating groups have been reported and their application in transition metal complexes has been exploited in a variety of catalytic transformations. This non-symmetric approach vastly increases the structural and electronic diversity of this class of ligand. This approach has proven beneficial in a variety of ways, such as the use of a single weakly coordinating moiety, which can dissociate and thereby create a vacant coordination site to increase the catalyst activity. Additionally, this provides further access to chiral ligands and complexes for asymmetric induction. This perspective highlights recent, important examples of non-symmetric pincer ligands, which feature aryl or pyridine backbones, and the synthesis and use of subsequent complexes in catalytic transformations, and discusses the future potential of this type of ligand system.

Nitrogen fixation catalyzed by ferrocene-substituted dinitrogen-bridged dimolybdenum-dinitrogen complexes: unique behavior of ferrocene moiety as redox active site

A series of dinitrogen-bridged dimolybdenum-dinitrogen complexes bearing metallocene-substituted PNP-pincer ligands is synthesized by the reduction of the corresponding monomeric molybdenum-trichloride complexes under 1 atm of molecular dinitrogen. Introduction of ferrocene as a redox-active moiety to the pyridine ring of the PNP-pincer ligand increases the catalytic activity for the formation of ammonia from molecular dinitrogen, up to 45 equiv. of ammonia being formed based on the catalyst (22 equiv. of ammonia based on each molybdenum atom of the catalyst). The time profile for the catalytic reaction reveals that the presence of the ferrocene unit in the catalyst increases the rate of ammonia formation. Electrochemical measurement and theoretical studies indicate that an interaction between the Fe atom of the ferrocene moiety and the Mo atom in the catalyst may play an important role to achieve a high catalytic activity.

Recent progress in transition-metal-catalyzed reduction of molecular dinitrogen under ambient reaction conditions

This paper describes our recent progress in catalytic nitrogen fixation by using transition-metal-dinitrogen complexes as catalysts. Two reaction systems for the catalytic transformation of molecular dinitrogen into ammonia and its equivalent such as silylamine under ambient reaction conditions have been achieved by the molybdenum-, iron-, and cobalt-dinitrogen complexes as catalysts. Many new findings presented here may provide new access to the development of economical nitrogen fixation in place of the Haber-Bosch process.