Electronic Effects of Aromatic Rings on the Catalytic Activity of Dioxidomolybdenum(VI)-Hydrazone Complexes

Impact of POM's coordination mode and Mo-hybrid constituents on the binding, stability, and catalytic properties of hybrid (pre)catalysts

The assembly of MoVIO2 2+ and methoxy-substituted salicylaldehyde nicotinoyl hydrazone ligands afforded two classes of hybrid polyoxometalates (POMs). In the Class I architectures, [MoO2(HL1-3)(D)]2[Mo6O19]·xCH3COCH3 (D = CH3COCH3 or H2O, x = 0 or 2, and L1-3 = ligands bearing the OMe group at position 3, 4 and 5, respectively), the main driving force for self-assembly is the electrostatic interaction between the components. Class II architectures are composed of a POM anion covalently linked to two Mo-complex units through the terminal Ot or bridging μ2-OPOM oxygen atoms, as found in Lindqvist-based hybrids [{MoO2(HL1-3)}2Mo6O19]·xCH3CN (x = 0 or 2) and the asymmetrical β-octamolybdate-based hybrid [{Mo2O4(HL2)(H2L)}{MoO2(HL2)}2Mo8O26]·CH3CN·H2O. Quantum chemical calculations were applied to evaluate the impact of the POM hybrid constituents on the hybrid-type stability, showing that it strongly depends on the ligand substituent position and ancillary ligand nature. Hybrids were tested as catalysts for cyclooctene epoxidation using tert-butyl hydroperoxide (TBHP in water or decane) and with or without the addition of acetonitrile (CH3CN) as an organic solvent. The catalytic results provided by the use of TBHP in decane are the best ones and classify all the prepared catalysts as very active, with the conversion of cyclooctene >90%, and high selectivity towards epoxide, >80%. We also examined the influence of the ligand structure, POM's hybrid type, and coordination mode on the Mo-hybrid activity and selectivity.

Catching an Oxo Vanadate Porous Acetylacetonate Covalent Adaptive Catalytic Network that Renders Mustard-Gas Simulant Harmless

In this work, we illustrated the design and development of a metal-coordinated porous organic polymer (POP) namely VO@TPA-POP via a post-synthetic metalation strategy to incorporate oxo-vanadium sites in a pristine polymer (TPA-POP) having acetylacetonate (acac) as anchoring moiety. The as-synthesized VO@TPA-POP exhibited highly robust and porous framework, which has been utilized for thioanisole (TA) oxidation to its corresponding sulfoxide. The catalyst demonstrated notable stability and recyclability by maintaining its catalytic activity over multiple reaction cycles without any significant loss in activity. The X-ray absorption spectroscopy (XAS) and density functional theory (DFT) analysis establish the existence of V(+4) oxidation state along with the VO(O)4 active sites into the porous network and the most energetically feasible mechanistic pathway involved in the TA oxidation, respectively, indicating the role of electron density associated with vanadium center during the catalytic transformation. Thus, this work aims at the demonstration of versatility and potential of VO@TPA-POP as a porous heterogeneous catalyst for the TA oxidation followed by decontamination of sulfur mustards (HD's) to their corresponding less toxic sulfoxides in a more efficient and greener way.

Reactivity of metal dioxo complexes

Metal dioxo chemistry and its diverse reactivity are presented with an emphasis on the mechanisms of reactivity. Work from approximately the last decade is surveyed and organized by metal. In particular, the chemistry of cis-dioxo metal complexes is discussed at length. Reactions are grouped by generic type, including addition across a metal oxo bond, oxygen atom transfer, and radical atom transfer reactions. Attention is given to advances in deoxygenation chemistry, oxidation chemistry, and reductive transformations.

Preparative and Catalytic Properties of MoVI Mononuclear and Metallosupramolecular Coordination Assemblies Bearing Hydrazonato Ligands

A series of polynuclear, dinuclear, and mononuclear Mo(VI) complexes were synthesized with the hydrazonato ligands derived from 5-methoxysalicylaldehyde and the corresponding hydrazides (isonicotinic hydrazide (H2L1), nicotinic hydrazide (H2L2), 2-aminobenzhydrazide (H2L3), or 4-aminobenzhydrazide (H2L4)). The metallosupramolecular compounds obtained from non-coordinating solvents, [MoO2(L1,2)]n (1 and 2) and [MoO2(L3,4)]2 (3 and 4), formed infinite structures and metallacycles, respectively. By blocking two coordination sites with cis-dioxo ligands, the molybdenum centers have three coordination sites occupied by the ONO donor atoms from the rigid hydrazone ligands and one by the N atom of pyridyl or amine-functionalized ligand subcomponents from the neighboring Mo building units. The reaction in methanol afforded the mononuclear analogs [MoO2(L1-4)(MeOH)] (1a-4a) with additional monodentate MeOH ligands. All isolated complexes were tested as catalysts for cyclooctene epoxidation using tert-butyl hydroperoxide (TBHP) as an oxidant in water. The impact of the structure and ligand lability on the catalytic efficiency in homogeneous cyclooctene epoxidation was elucidated based on theoretical considerations. Thus, dinuclear assemblies exhibited better catalytic activity than mononuclear or polynuclear complexes.

Counter Anion Effects on the Formation and Structural Transformations of Mo(vi)-Hydrazone Coordination Assemblies: Salts, Solvates, Co-Crystals, and Neutral Complexes

Complex salts [1H]X and [1H](XA)0.5·2MeOH, and co-crystals [1H]X·0.5VA (X = chloride or bromide, XA = chloranilate or bromanilate, VA = o-vanillin azine), comprising [MoO2(HL)(MeOH)]+ ([1H]+) cation (H2L = 3-methoxysalicylaldehyde isonicotinoyl hydrazone), were prepared either by solution-based synthesis or by mechanochemical synthesis. Whereas [1H]X salts were extremely sensitive to humidity, their stability could be reinforced by the azine incorporation into the complex network. Solvent-mediated transformations of [1H]X led to methanol co-ligand replacement and afforded complexes [MoO2(HL)X] (2Cl·MeOH, 2Cl, and 2Br·0.5MeCN). However, solvates [1H](XA)0.5·2MeOH, under the same conditions, gave stable complexes [1H](XA)0.5 in which methanol remained coordinated. The differences in the assembly’s behavior were attributed to the packing arrangements, the relative orientation of cations and anions, and interactions between them. Polymorph [MoO2(L)(MeOH)] (1), not attainable by other routes, was the only product when compounds [MoO2(HL)X] were treated with a weak base at low temperatures. Tetranuclear [MoO2(L)]4 and polynuclear [MoO2(L)]n (2) supramolecular isomers, concomitantly crystallized when the reaction was conducted solvothermally. All of the complexes were characterized using X-ray diffraction methods (SCXRD and PXRD), spectroscopic methods (ATR-IR and solution-state and solid-state MAS NMR), and elemental and thermal analyses. The cytotoxicity of the different types of compounds against THP-1 and HepG2 cells was also evaluated.

Green solvent free epoxidation of olefins by a heterogenised hydrazone-dioxidotungsten(vi) coordination compound

A new mononuclear tungsten coordination compound, [WO₂L(CH₃OH)] (1), was synthesized by the reaction of WCl₆ and H₂L (H₂L = (E)-4-amino-N′-(5-bromo-2-hydroxybenzylidene)benzohydrazide) in methanol. Both the H₂L and compound 1 were characterized by elemental analysis and UV-Vis, FT-IR and NMR spectroscopic methods. The molecular structure of compound 1 was also determined by single crystal X-ray analysis which confirmed the compound is a mononuclear coordination compound of cis-dioxidotungsten(vi) containing a free amine functionality on the ligand. Compound 1 was supported on propionyl chloride-functionalized silica gel by amidification reaction to obtain a heterogeneous catalyst. The obtained heterogeneous catalyst was characterized by FT-IR spectroscopy, thermal gravimetric analysis (TGA), diffuse-reflectance spectroscopy (DRS), X-ray diffraction analysis (XRD), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) and its catalytic activity was investigated in the epoxidation of olefins with hydrogen peroxide under solvent free conditions. The catalyst was successfully recovered several times and the recovered catalyst was also characterized by various methods including FT-IR, DRS, TGA, SEM and EDX analyses. The results indicated this heterogeneous catalytic system is an effective and selective catalyst for epoxidation of olefins and can be reused several times without significant change in its catalytic activity.

In this study the solvent free catalytic oxidation of olefins by a new silica supported hydrazone-dioxidotungsten(vi) coordination compound is investigated.

Alcohol Oxidation Assisted by Molybdenum Hydrazonato Catalysts Employing Hydroperoxide Oxidants

Molybdenum(VI) catalysts were obtained from methanol or acetonitrile by the reaction of [MoO2(C5H7O2)2] and isonicotinoyl- or nicotinoyl-based aroylhydrazones. Reactions in methanol resulted in the formation of the mononuclear complexes [MoO2(L1–4)(MeOH)] (1a–4a), while the ones in acetonitrile provided polynuclear complexes [MoO2(L1–4)]n (1–4). Crystals of polynuclear compound, [MoO2(L3)]n∙H2O (3∙H2O), suitable for X-ray diffraction analysis were obtained by the solvothermal procedure at 110 °C. Complexes were characterized by infrared spectroscopy (IR-ATR), nuclear magnetic resonance (NMR), elemental analysis (EA), and thermogravimetric analysis (TGA). The prepared catalysts were tested in alcohol oxidation reactions. Carveol, cyclohexanol, and butan-2-ol were investigated substrates. Because the alcohol oxidations are very challenging due to various possible pathways, the idea was to test different oxidants, H2O2, TBHP in water and decane, to optimize the researched catalytic system.

Cu(II)-Hydrazide Coordination Compound Supported on Silica Gel as an Efficient and Recyclable Heterogeneous Catalyst for Green Click Synthesis of β-Hydroxy-1,2,3-triazoles in Water

A hydrazone ligand, (E)-6-(2-((2-hydroxynaphthalen-1-yl)methylene)hydrazinyl)nicotinohydrazide (H₂L), was synthesized and characterized by spectroscopic methods. The reaction of H₂L with CuCl₂·2H₂O in methanol gave Cu(II) coordination compound, [Cu(HL')(Cl)]·CH₃OH (1), which was characterized by elemental analysis and spectroscopic methods (Fourier transform infrared (FT-IR) and UV-vis). The structure of 1 was also determined by single-crystal X-ray analysis. Structural studies confirmed the formation of esteric group during the synthesis of 1. Compound 1 was immobilized on 3-aminopropyltriethoxysilane (APTS)-functionalized silica gel through the amidification reaction and the obtained heterogeneous coordination compound was utilized as a catalyst for the three-component azide-epoxide-alkyne cycloaddition reaction in water as a green solvent. The structural properties of the heterogeneous catalyst were characterized by a combination of FT-IR, UV-vis, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and energy-dispersive spectrometry (EDS) analyses. The effect of the amount of catalyst and temperature on the cycloaddition reaction was studied, and the obtained 1,2,3-triazoles were characterized by spectroscopic studies and single-crystal X-ray analysis. The catalytic investigations revealed that this catalytic system has high activity in the synthesis of β-hydroxy-1,2,3-triazoles. It was also found that the aromatic and aliphatic substituents on the alkyne and epoxide together with the reaction temperature have considerable effects on the activity and regioselectivity of this catalytic system.

Coordinating and supramolecular prospects of unsymmetrically substituted carbohydrazides

Unsymmetrically substituted carbohydrazides serve as multifunctional ligands, practicing their chelating and supramolecular roles with cis-dioxomolybdenum(vi) cationic core and the Lindqvist anion.

Recent Advances in Facile Liquid Phase Epoxidation of Light Olefins over Heterogeneous Molybdenum Catalysts

Molybdenum complexes are versatile and efficient for liquid phase olefin epoxidation reactions. Rational design of catalysts is critical to achieve high atom efficiency during epoxidation processes. Although liquid phase epoxidation has been a popular topic for decades, three key issues, (a) rational control of morphology of molybdenum nanoparticles, (b) manipulating metal-support interaction and (c) altering electronic configuration at molybdenum center remains unsolved in this area. Therefore, in this paper, we have critically revised recent research progress on heterogeneous molybdenum catalysts for facile liquid phase olefin epoxidation in terms of catalyst synthesis, surface characterization, catalytic performance and structure-function relationship. Furthermore, plausible reaction mechanisms will be systematically discussed with the aim to provide insights into fundamental understanding on novel epoxidation chemistry.

Discrete mononuclear and dinuclear compounds containing a MoO22+ core and 4-aminobenzhydrazone ligands: synthesis, structure and organic-solvent-free epoxidation activity

New aroylhydrazone molybdenum(vi) complexes have been synthesized, characterized and used as (pre)catalysts for epoxidation of cyclooctene using aqueous TBHP as the oxidant.

Electrocatalytic water oxidation by a Ni(ii) salophen-type complex

A new mononuclear Ni(ii) complex, NiL (1), was synthesized from the reaction of Ni(OAc)₂·4H₂O and salophen-type N₂O₂-donor ligand, H₂L (where H₂L = 2,2′-((1E,1′E)-((4-chloro-5-methyl-1,2-phenylene)bis(azanylylidene))bis(methanylylidene))diphenol), in ethanol. The obtained complex was characterized by elemental analysis, spectroscopic techniques and single crystal X-ray analysis. The complex was studied as a water oxidizing catalyst and its electrocatalytic activity in the water oxidation reaction was tested in 0.5 M of borate buffer at pH = 3, 7 and 11 in a typical three-electrode setup with a carbon paste electrode modified by complex 1 as a working electrode. The linear sweep voltammetry (LSV) curves indicated that complex 1 has a much superior activity and only needs 21 mV vs. Ag/AgCl overvoltage to reach a geometrical catalytic current density of 2.0 mA cm⁻² at pH = 11. The onset potential decreased from 1.15 V to 0.67 V vs. Ag/AgCl with an increase of pH from 3 to 13 under a constant current density of 1.0 mA cm⁻². Then, to determine the true catalyst for the water oxidation reaction in the presence of complex 1 at pH = 3, 7 and 11, cyclic voltammetry was also performed. The continuous CVs for complex 1 at neutral and alkaline solutions showed significant progress for the water oxidation reaction. In addition, the amperometry tests exhibited excellent stability and high constant current density for water oxidation by CPE-complex 1 under electrochemical conditions at pH = 11 and 7. Although X-ray powder diffraction analysis did not show a pure and crystalline structure for NiO_x, the scanning electron microscopy images showed that nickel oxide at pH = 11 and nickel oxide or other Ni-based compounds at pH = 7 are true water oxidizing catalysts on the surface of a CPE electrode. Moreover at pH = 3, no clear water oxidation or NiO_x formation was observed.

One new Ni-salophen type complex was designed as a water oxidation electrocatalyst in neutral and basic solutions.

The effect of the orientation of the Jahn–Teller distortion on the magnetic interactions of trinuclear mixed-valence Mn(ii)/Mn(iii) complexes

The effect of the orientation of the Jahn–Teller distortion on the magnetic interactions in two new mixed-valence trinuclear Mn(iii)–Mn(ii)–Mn(iii) complexes has been investigated.

Molybdenum(vi) complexes of hemilabile aroylhydrazone ligands as efficient catalysts for greener cyclooctene epoxidation: an experimental and theoretical approach

The focus of this work was on the synthesis, characterization and catalytic activity of Mo(vi) complexes with hemilabile 2-aminobenzhydrazone ligands.

Colorimetric detection of hydrogen peroxide by dioxido-vanadium(V) complex containing hydrazone ligand: synthesis and crystal structure

Dioxido-vanadium(V) complex has been synthesized in good yield, the complex was characterized by IR, UV-visible and ¹H NMR spectroscopy. Single crystal X-ray crystallography techniques were used to assign the structure of the complex. Complex crystallized with monoclinic P2₁/c space group with cell parameters a (Å) = 39.516(5), b (Å) = 6.2571(11), c (Å) = 17.424(2), α (°) = 90, β (°) = 102.668(12) and γ (°) = 90. The hydrazone ligand is coordinate to metal ion in tridentate fashion through -ONO- donor atoms forming a distorted square pyramidal geometry around the metal ion.