Electronic Influences on the Stability and Kinetics of Cp* Rhodium(III) Azide Complexes in the iClick Reaction with Electron-Poor Alkynes

Tuning The Intracellular Distribution of [3+2+1] Iridium(III) Complexes In Bacterial And Mammalian Cells By iClick Reaction With Biomolecular Carriers Functionalized With Alkynone Groups

Three iridium(III) triazolato complexes of the general formula [Ir(triazolatoR,R')(ppy)(terpy)]PF6 with ppy=2-phenylpyridine and terpy=2,2':6',2''-terpyridine were efficiently prepared by iClick reaction of [Ir(N3)(ppy)(terpy)]PF6, with alkynes and alkynones, which allowed facile introduction of biological carriers such as biotin and cholic acid. In contrast to the precursor azido complex, which decomposed upon photoexcitation on a very short time scale, the triazolato complexes were stable in solution for up to 48 h. They emit in the spectral region around 540 nm with a quantum yield of 15-35 % in aerated acetonitrile solution and exhibit low cytotoxicity with IC50 values >50 μM for most complexes in L929 and HeLa cells, demonstrating their high suitability as luminescent probes. Cell uptake studies with confocal luminescence microscopy in prokaryotic Gram-positive S. aureus and Gram-negative E. coli bacteria as well as eukaryotic mammalian L929 and HeLa cells showed significant uptake in particular of the cholic acid conjugates iridium(III) moiety and distinct intracellular distribution modulated by the nature of the peripheral functional groups that can easily be modified by the iClick reaction.

Isostructural Series of Ni(II), Pd(II), Pt(II), and Au(III) Azido Complexes with a N^C^N Pincer Ligand to Elucidate Trends in the iClick Reaction Kinetics and Structural Parameters of the Triazolato Products

An isoelectronic and isostructural series of cyclometalated azido complexes [M(N3)(dpb)] with M = Ni(II), Pd(II), Pt(II), and Au(III) based on the N^C^N pincer ligand 1,3-di(2-pyridyl)phenide (dpb) was characterized by X-ray diffraction analysis and investigated for reactivity in the iClick reaction with a wide range of internal and terminal alkynes by using 1H and 19F NMR spectroscopy. Reaction rate constants were found to increase with greater charge density in the order Ni(II) > Pd(II) > Pt(II) > Au(III). Terminal alkynes R-C≡C-R' with strongly electron-withdrawing groups R and R' exhibited faster kinetics than those with electron-donating substituents in the order CF3 > ketone > ester > H > phenyl ≫ amide, while R = CH3 resulted in complete loss of reactivity. Four symmetrical triazolato complexes [M(triazolatoCOOCH3,COOCH3)(dpb)] with M = Ni(II), Pd(II), Pt(II), and Au(III) as well as four nonsymmetrically substituted triazolato complexes [Pt(triazolatoR,R')(dpb)] originating from terminal and internal alkynes were shown by X-ray crystal structure analysis to exclusively feature N2-coordination of the five-membered ring ligand. However, the Pt(II) triazolato complexes exist as a mixture of N1- and N2-coordinated species in solution. Torsion angles between the mean planes of the N^C^N pincer and the triazolato ligand increase from a nearly coplanar to a perpendicular arrangement when going from Au(III)/Pt(II)/Pd(II) to Ni(II), while different substituents R and R' on the alkyne have no influence on the torsion angle and were rationalized by DFT calculations. Finally, a carbohydrate derivative obtained by glucuronic acid conjugation to methyl propiolate demonstrates the facile biofunctionalization of metal complexes via the iClick reaction.

Electrospray Mass Spectrometry to Study Combinatorial iClick Reactions and Multiplexed Kinetics of [Ru(N3)(N∧N)(terpy)]PF6 with Alkynes of Different Steric and Electronic Demand

In a combinatorial approach, a family of ruthenium(II) azido complexes [Ru(N₃)(N∧N)(terpy)]PF₆ with terpy = 2,2':6',2″-terpyridine and N∧N as a bidentate chelator derived from 2,2'-biypridine and its 4,4'-disubstituted derivatives, 2,2'-bipyrimidine, and 1,10-phenanthroline were reacted with different internal and terminal alkynes to give access to a total of 7 × 7 = 49 triazolato complexes in a room-temperature catalyst-free iClick reaction. The reactants were mixed in a repurposed high-performance liquid chromatography (HPLC) autosampler, and the reaction progress was monitored by direct injection into an electrospray mass spectrometer. The ratio of the peak intensities of [Ru(N₃)(N∧N)(terpy)]⁺ and [Ru(triazolato)(N∧N)(terpy)]⁺ was converted to a colored heat map for facile visual inspection of the conversion ratio. By automated multiple injections of the reaction mixture in fixed time intervals and plotting peak intensities over reaction time, pseudo-first-order rate constants were easily determined. Finally, nonoverlapping isotope patterns of the azido starting materials and triazolato products enabled multiplexed parallel determination of rate constants for four different ruthenium(II) azido complexes from a single sample vial, thereby reducing experiment time by 75%.

iClick synthesis of network metallopolymers

Described is an approach to preparing the first iClick network metallopolymers with porous properties. Treating digoldazido complex 2-AuN3 with trigoldacetylide 3-AuPPh3 or 3-AuPEt3, trialkyne 3-H, tetragoldacetylide 4-AuPPh3, or tetraalkyne 4-H in CH₂Cl₂ affords five iClick network metallopolymers 5-AuPPh3, 5-AuPEt3, 5-H, 6-AuPPh3, and 6-H. Confirmation of the iClick network metallopolymers comes from FTIR, ¹³C solid-state cross-coupling magic angle spinning (CPMAS) NMR spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and nitrogen and CO₂ sorption analysis. Employing model complexes 7-AuPPh3, 7-AuPEt3, 7-H, 8-AuPPh3, and 8-H provides structural insights due to the insolubility of iClick network metallopolymers.

Role of the ancillary ligand in controlling the lysozyme affinity and electronic properties of terpyridine fac-Re(CO)3 complexes

The lysozyme binding affinity and the electronic properties of [ReX(CO)3(terpy-κ2N1,N2)] (X = Br- and triazolateCOOCH2CH3,CF3) were reported. The triazolate complex was prepared in a [3 + 2] cycloaddition click reaction. The bromo compound reacted with lysozyme affording adducts with Re(CO)3+ fragments, while the triazolate compound persisted. A red shift of the MLCT band of the triazolate compound in progressively less polar solvents may be due to the negative solvatochromism.

An Application Exploiting Aurophilic Bonding and iClick to Produce White Light Emitting Materials

The paper focuses on exploiting aurophilic bonding to produce white light emitting materials. Inorganic Click (iClick) is employed to link two or four Au(I) metal ions through a triazolate bridge. Depending on the choice of phosphine ligand (PEt3 or PPh3), dinuclear Au2-FO or tetranuclear Au4-FO complexes can be controllably synthesized (FO = 2-(9,9-dioctylfluoreneyl-)). The iClick products Au2-FO and Au4-FO are characterized by combustion analysis and multinuclear NMR, TOCSY 1D, 1H-13C gHMBC, and 1H-13C gHSQC. In addition, the photophysical properties of Au2-FO and Au4-FO were examined in THF solution. Transient absorption spectroscopy was employed to elucidate the excited state features of the gold compounds. Solution processed OLEDs were fabricated and characterized, which gave white light electroluminescence with CIE coordinates (0.34, 0.36), as seen referenced to CIE standard illuminant D65 (0.31, 0.32). TDDFT computational analysis of Au2-FO and Au4-FO reveals the origin of light emission. In the case of Au4-FO, direct excitation leads to increased aurophilic bonding in the excited state, and as a result the emission profile is broadened to cover a larger region of the visible spectrum, thus giving white light emission. Designing molecules that can access or increase aurophilic bonding in the excited state provides another tool for fine-tuning the emission profiles of gold complexes.

iClick Reactions of Square-Planar Palladium(II) and Platinum(II) Azido Complexes with Electron-Poor Alkynes: Metal-Dependent Preference for N1 vs N2 Triazolate Coordination and Kinetic Studies with 1H and 19F NMR Spectroscopy

Two square-planar palladium(II) and platinum(II) azido complexes [M(N₃)(L)] with L = N-phenyl-2-[1-(2-pyridinyl)ethylidene]hydrazine carbothioamide reacted with four different electron-poor alkynes R-C≡C-R' with R = R' = COOCH₃, COOEt, COOCH₂CH₂OCH₃ or R = CF₃, R' = COOEt in a [3 + 2] cycloaddition "iClick" reaction. The resulting triazolate complexes [M(triazolate^R,R')(L)] were isolated by simple precipitation and/or washing in high purity and good yield. Six out of the eight new compounds feature the triazolate ligand coordinated to the metal center via the N2 nitrogen atom, but fortuitous solubility properties allowed isolation of the N1 isomer in two cases from acetone. When the solvent was changed to DMSO, the N1 → N2 isomerization could be studied by NMR spectroscopy and took several days to complete. ¹⁹F NMR studies of the iClick reaction with F₃C-C≡C-COOEt led to identification of a putative early linear intermediate in addition to the N1 and N2 isomers, however with the latter as the final product. Rate constants determined by ¹H or ¹⁹F NMR spectroscopy increased in the order Pd > Pt and CF₃/COOEt > COOR/COOR with R = CH₃, Et, CH₂CH₂OCH₃. The second-order rate constant k₂ > 3.7 M^-1 s^-1 determined for the reaction of [Pd(N₃)(L)] with F₃C-C≡C-COOEt is the fastest observed for an iClick reaction so far and compares favorably with that of the most evolved strained alkynes reported for the SPAAC (strain-promoted azide-alkyne cycloaddition) to date. Selected title compounds were evaluated for their anticancer activity on the GaMG human glioblastoma brain cancer cell line and gave EC₅₀ values in the low micromolar range (2-16 μM). The potency of the Pd(II) complexes increased with the chain length of the substituents in the 4- and 5-positions of the triazolate ligand.

2,2':6',2''-Terpyridine switches from tridentate to monodentate coordination in a gold(iii) terpy complex upon reaction with sodium azide

Reaction of [AuCl(terpy-κ³-N^1,1',1'')]Cl₂ with an excess of sodium azide did not result in the expected exchange of the chlorido by an azido ligand to give [Au(N₃)(terpy-κ³-N^1,1',1'')]²⁺. Instead, X-ray structure analysis showed that the isolated product is [Au(N₃)₃(terpy-κ¹-N¹)], in which the terpyridine ligand is in a very rare monodentate coordination mode. This is also the dominant species in solution, together with a minor amount of [Au(N₃)₂(terpy-κ²-N^1,1')]⁺. The stability of the tris(azido)gold(iii) moiety relative to other possible species was also confirmed by DFT calculations.

Platinum(iv) azido complexes undergo copper-free click reactions with alkynes

We report our investigations into the first examples of copper-free 1,3-dipolar cycloaddition (click) reactions of electrophiles with a PtIV azido complex. The Pt-IV azido complex trans, trans, trans-[PtIV(py)2(N3)2(OH)2] (1) was reactive towards dimethyl acetylenedicarboxylate (DMAD) (2), diethyl acetylenedicarboxylate DEACD (3), N-[(1R,8S,9s)-bicyclo[6.1.0]non-4-yn-9-ylmethyloxycarbonyl]-1,8-diamino-3,6-dioxaoctane (BCN) (11) and dibenzocyclooctyne-amine (DBCO) (12) resulting in formation of the corresponding mono (a) and bis-substituted (b) complexes. Complexes of 2 undergo further reactions between the Pt centre and the carbonyl group to form 2a' and 2b'. This is not seen for the products of the corresponding PtII azido complex trans-[Pt(py)2(N3)2] with acetylene 2. Novel complexes 2a', 2b', 11a and 11b have been characterised by multinuclear NMR, IR and UV-vis spectroscopy and ESI-MS. These reactions represent new synthetic routes to novel Pt(iv) complexes.

Catalyst-free room-temperature iClick reaction of molybdenum(ii) and tungsten(ii) azide complexes with electron-poor alkynes: structural preferences and kinetic studies

Two isostructural and isoelectronic group VI azide complexes of the general formula [M(η³-allyl)(N₃)(bpy)(CO)₂] with M = Mo, W and bpy = 2,2'-bipyridine were prepared and fully characterized, including X-ray structure analysis. Both reacted smoothly with electron-poor alkynes such as dimethyl acetylenedicarboxylate (DMAD) and 4,4,4-trifluoro-2-butynoic acid ethyl ester in a catalyst-free room-temperature iClick [3 + 2] cycloaddition reaction. Reaction with phenyl(trifluoromethyl)acetylene, on the other hand, did not lead to any product formation. X-ray structures of the four triazolate complexes isolated showed the monodentate ligand to be N2-coordinated in all cases, which requires a 1,2-shift of the nitrogen from the terminal azide to the triazolate cycloaddition product. On the other hand, a ¹⁹F NMR spectroscopic study of the reaction of the fluorinated alkyne with the tungsten azide complex at 27 °C allowed detection of the N1-coordinated intermediate. With this method, the second-order rate constant was determined as (7.3 ± 0.1) × 10^-2 M^-1 s^-1, which compares favorably with that of first-generation compounds such as difluorocyclooctyne (DIFO) used in the strain-promoted azide-alkyne cycloaddition (SPAAC). In contrast, the reaction of the molybdenum analogue was too fast to be studied with NMR methods. Alternatively, solution IR studies revealed pseudo-first order rate constants of 0.4 to 6.5 × 10^-3 s^-1, which increased in the order of Mo > W and F₃C-C[triple bond, length as m-dash]C-COOEt > DMAD.

Probing the factors that influence the conformation of a guanidinato ligand in [(η5-C5Me5)M(NN)X] (NN = chelating N,N′,N′′-tri(o-substituted aryl)guanidinate(1−); X = chloro, azido and triazolato)

The conformational difference illustrated is ascribed to a subtle repulsive interaction between the o-Cl substituent of two proximal aryl rings in the guanidinate ligand.