High-Performance Supercapacitor Afforded by a High-Connected Keggin-Based 3D Coordination Polymer

Six polyoxotungstate-based transition metal compounds for electrochemical capacitor application and a comparative analysis of factors affecting capacitances

Six different polyoxotungstate-based transition metal complexes were synthesized, namely [Cu5(2,2'-bpy)5(μ2-Cl)2(PO4)2(H2O)2][HPW12O40]·2H2O (1), [Cu1.5(2,2'-bpy)1.5(inic)2(H2O)1.5]3[H1.5PW12O40]2·16.25H2O (2), [Cu(2,2'-bpy)2]2[SiW12O40]·10H2O (3), [Zn(phen)3]2[PWVWVI11O40]·5H2O (4), [Zn(phen)2(H2O)]2[SiW12O40]·2H2O (5), and [Zn(2,2'-bpy)2]2[SiW12O40] (6) (2,2'-bpy = 2,2'-bipyridine, inic = isonicotinic acid, phen = 1,10-phenanthroline). Compound 1 is based on [HPW12O40]2- anions, which are accommodated within the open channels of a supramolecular network formed by novel Cu-P-Cl coordination clusters. Compound 2 is constructed from [H1.5PW12O40]1.5- and novel [Cu1.5(2,2'-bpy)1.5(inic)2(H2O)1.5]+ coordination fragments, and polyoxoanions are encapsulated within the pores created by the copper coordination fragments, resulting in a unique three-dimensional supramolecular architecture. Compound 3 is a two-dimensional structure formed through the covalent linkage between [SiW12O40]4- and [Cu(2,2'-bpy)2]2+. Compound 4 is a supramolecular architecture formed by [PWVWVI11O40]4- and [Zn(phen)3]2+ coordination fragments, while compound 5 is a supramolecular structure based on POM bi-supported Zn coordination complexes. Compound 6 is a two-dimensional framework structure constituted by [SiW12O40]4- and [Zn(2,2'-bpy)2]2+via covalent interactions. In addition, electrochemical measurement results show that the copper-based tungstate compounds 1-3 and zinc-based tungstate compounds 4-6 exhibit different performances and durabilities as electrochemical capacitors (compound 1 shows the highest specific capacitance of 94.0 F g-1 at 1.5 A g-1, whereas compound 6 maintains the best cycling stability with the capacity retention of 80.7% after 1000 cycles at 4 A g-1.). This study contributes to the development of POM-based transition metal complexes with high capacitance by providing insights into the design and synthesis process.

Synthesis and Structure of a Copper-Based Functional Network for Efficient Organic Dye Adsorption

In the work, by incorporating polyoxometalates (POMs) into a copper(II)-based network, a novel three-dimensional (3D) porous framework, [Cu₁₇Cl₃(trz)₁₂]H₃[GaW₁₂O₄₀]·9H₂O (Cu-GaW-TRZ), was successfully prepared and explored for the adsorption of dyes. The adsorption capacity of Cu-GaW-TRZ was calculated as 13.11 mg/g, and the dye adsorption rate equaled 96.2% for the adsorption of methylene blue (MB). Furthermore, this recyclable adsorbent is stable enough without obvious loss of adsorption capacity for at least five runs. Meanwhile, the structure of the macropores is suitable for the entry of large molecular dyes, and [GaW₁₂O₄₀]^5- also can achieve efficient adsorption for cationic dyes. The results displayed a pseudo-second-order kinetic model and were well matched for MB adsorption onto Cu-GaW-TRZ. The free energy, entropy, and enthalpy of the thermodynamic parameters for the adsorption of MB were calculated, which revealed that the adsorption process was befitting for the adsorption of MB.

A hybrid borotungstate-coated metal-organic framework with supercapacitance, photocatalytic dye degradation and H2O2 sensing properties

The compounding of polyoxometalates (POMs) with structurally well-defined and porous metal-organic frameworks (MOFs) has become a hot research topic. Here, a core-shell type hybrid, {Ag₅BW₁₂O₄₀}@[Ag₃(μ-Hbtc)(μ-H₂btc)]_n (called {Ag₅BW₁₂O₄₀}@Ag-BTC-2, where BTC = 1,3,5-benzyl carboxylic acid), was successfully prepared via a simple grinding method. IR, XRD, SEM, TEM, and XPS analysis was used to confirm the structure. The specific capacitance is 179.1 F g^-1 when the current density is 1 A g^-1, using nickel foam as the collector, and the capacitance retention is 97.4% after 5000 cycles. The resulting aqueous-based symmetric supercapacitor has a power density of 496 W kg^-1 and an energy density of 12.4 W h kg^-1. In addition, the degradation rates using {Ag₅BW₁₂O₄₀}@Ag-BTC-2 toward methylene blue (MB), rhodamine B (RhB), and methyl orange (MO) exceeded 90% in 140 min and remained essentially unchanged over five replicate experiments, showing high photocatalytic activity. Meanwhile, when {Ag₅BW₁₂O₄₀}@Ag-BTC-2 acts as a H₂O₂ biosensor, it has a low detection limit (0.19 μM), a wide linear range (0.4 μM-0.27 mM) and high anti-interference properties. This shows that the synthesis of POMOFs via a grinding method is an effective strategy to improve the performance.

{BW12O40} Hybrids Modified by in Situ Synthesized Rigid Ligand with Supercapacitance and Photocatalytic Properties

Organic rigid ligand-modified polyoxometalate-based materials possess complex and diverse structures, promising electrochemical energy storage properties and outstanding photocatalytic capabilities. Hence, two new [BW₁₂O₄₀]^5-(abbreviated as {BW₁₂O₄₀})-based inorganic-organic hybrids [{Cu(en)₂(H₂O)}][{Cu(pdc)(en)}{Cu(en)₂}(BW₁₂O₄₀)]·2H₂O (1) and [{Cu^I₅(pz)₆(H₂O)₄}(BW₁₂O₄₀)] (2) (pdc = 2-picolinate, en = ethylenediamine, pz = pyrazine) were successfully synthesized through a hydrothermal method. Among them, pdc and pz were obtained by in situ transformation from 2,6-pyridinedicarboxylic acid (H₂ pydc) and 2,3-pyrazinedicarboxylic acid (H₂pzdc), respectively. In compound 1, the {BW₁₂O₄₀} clusters as an intermediate junction connect with {Cu(pdc)(en)}{Cu(en)₂} and {Cu(en)₂(H₂O)} to form monomers, which in turn form supramolecular chains, sheets, and space network via hydrogen bonding. The {BW₁₂O₄₀} clusters are packed into copper-pyrazine frameworks in compound 2, and a unique polyoxometalate-based metal organic frameworks (POMOFs) structure with a new topology of {12}₂{6.12³.14²}₂{6².12.14².18}{6².12³.16}{6}₆ is formed via covalent bonds. When used as electrode materials for supercapacitors, the values of specific capacitance are 651.56 F g^-1 for 1-GCE and 584.43 F g^-1 for 2-GCE at a current density of 2.16 A g^-1 and good cycling stability (90.94%, 94.81% of the initial capacity after 5000 cycles at 15.12 A g^-1, respectively). The kinetic analysis reveals that surface capacitance plays a major role. Furthermore, both compounds can effectively degrade Rhodamine B (RhB) and Methylene blue (MB), showing the outstanding photocatalytic performance.

2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior

The reaction of the thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile ligands afforded four Ag(i) coordination polymers with excellent photocatalytic activity in the degradation of the mordant blue 9 dye.

A {BW12O40} hybrid decorated by Ag+ for use as a supercapacitor electrode material and photocatalyst

Through a hydrothermal method, we successfully synthesized a supramolecular compound [{Ag(phen)₂}₄{Ag(phen)}₂(H₂BW₁₂O₄₀)₂]. The as-synthesized material exhibited excellent supercapacitive and photocatalytic performances.

A High-Capacity Negative Electrode for Asymmetric Supercapacitors Based on a PMo12 Coordination Polymer with Novel Water-Assisted Proton Channels

The development of a negative electrode for supercapacitors is a critical challenge for the next-generation of energy-storage devices. Herein, two new electrodes formed by the coordination polymers [Ni(itmb)₄ (HPMo₁₂ O₄₀ )]·2H₂ O (1) and [Zn(itmb)₃ (H₂ O)(HPMo₁₂ O₄₀ )]·4H₂ O (2) (itmb = 1-(imidazo-1-ly)-4-(1,2,4-triazol-1-ylmethyl)benzene), synthesized by a simple hydrothermal method, are described. Compounds 1 and 2 show high capacitances of 477.9 and 890.2 F g^-1 , respectively. An asymmetric supercapacitor device assembled using 2 which has novel water-assisted proton channels as negative electrode and active carbon as positive electrode shows ultrahigh energy density and power density of 23.4 W h kg^-1 and 3864.4 W kg^-1 , respectively. Moreover, the ability to feed a red light emitting diode (LED) also demonstrates the feasibility for practical use. The results allow a better elucidation of the storage mechanism in polyoxometalate-based coordination polymers and provide a promising direction for exploring novel negative materials for new-generation high-performance supercapacitors.

Self-assembly and lithium storage performance of a nanoscale polyoxometalate based on the {MnTa18} cluster

A nanosized Ta/W mixed addendum polyoxometalate (Cs12K3H7[MnTa18Si6W54O231]·61H2O) based on the unprecedented {MnTa18} cluster was fabricated successfully under hydrothermal conditions. An excellent electrochemical performance of this compound was found in lithium-ion batteries (LIBs) as an anode material. The discharge capacity was 829.9 mA h g-1 at a current density of 100 mA g-1 in the first cycle and stable at 428.4 mA h g-1 after 100 cycles, which suggests the potential application of this new compound in LIBs.

Bifunctional electrochromic-energy storage materials with enhanced performance obtained by hybridizing TiO2 nanowires with POMs

A bifunctional electrochromic-energy storage film with enhanced performance is designed and fabricated by hybridizing TiO₂ nanowires with POMs.

Polyoxometalate Metal-Organic Frameworks: Keggin Clusters Encapsulated into Silver-Triazole Nanocages and Open Frameworks with Supercapacitor Performance

To investigate the relationship between the structures of polyoxometalate host-guest materials and their energy-storage performance, three novel polyoxometalate-based metal-organic compounds, [Ag₁₀(C₂H₂N₃)₈][HVW₁₂O₄₀], [Ag₁₀(C₂H₂N₃)₆][SiW₁₂O₄₀], and [Ag(C₂H₂N₃)][Ag₁₂(C₂H₂N₃)₉][H₂BW₁₂O₄₀] are synthesized by a one-step hydrothermal method and further confirmed by single-crystal X-ray diffraction analyses and other numerous characterization techniques. In compound [Ag₁₀(C₂H₂N₃)₈][HVW₁₂O₄₀], the Keggin clusters are intersected into channels formed by a 3D open metal-organic framework. In contrast, in compounds [Ag₁₀(C₂H₂N₃)₆][SiW₁₂O₄₀] and [Ag(C₂H₂N₃)][Ag₁₂(C₂H₂N₃)₉][H₂BW₁₂O₄₀], the Keggin clusters are encapsulated into silver-triazole metal-organic nanocages to construct core-shell structures, which are further fused together by covalent bonds to form 3D polyoxometalate-based metal-organic frameworks. The electrochemical properties of three compound-based electrodes are estimated by cyclic voltammetry, galvanostatic charge-discharge, electrochemically active surface area, and electrochemical impedance spectroscopy. The results of the electrochemical performance tests indicate that these compounds possess high specific capacitance and cycling stability, especially [Ag₁₀(C₂H₂N₃)₈][HVW₁₂O₄₀], showing a specific capacitance of 93.5 F g^-1, which is higher than that of many other polyoxometalate-based electrode materials. A possible mechanism of the electrochemical performance is explored, which is mainly related to the redox capacity of polyoxometalate, the electrochemically active surface area, the electrochemical impedance spectroscopy, and the microstructures of polyoxometalate-based metal-organic frameworks.

Polyoxometalate-Incorporated Metallacalixarene@Graphene Composite Electrodes for High-Performance Supercapacitors

Composites of polyoxometalate (POM)/metallacalixarene/graphene-based electrode materials not only integrate the superiority of the individual components perfectly but also ameliorate the demerits to some extent, providing a promising route to approach high-performance supercapacitors. Herein, first, we report the preparations, structures, and electrochemical performance of two fascinating POM-incorporated metallacalixarene compounds [Ag₅(C₂H₂N₃)₆][H₅ ⊂ SiMo₁₂O₄₀] (1) and [Ag₅(C₂H₂N₃)₆][H₅ ⊂ SiW₁₂O₄₀] (2); (C₂H₂N₃ = 1 H-1,2,4-triazole). Single-crystal X-ray diffraction analyses illustrated that both 1 and 2 possess intriguing POM-sandwiched metallacalix[6]arene frameworks. Nevertheless, our investigations, including the electrochemical cyclic voltammetry, galvanostatic charge-discharge tests, and electrochemical impedance spectroscopy, reveal that the oxidation ability of the Keggin ions is a primary effect in electrochemical performance of these POM-incorporated metallacalixarene compounds. Namely, the electrodes containing Mo as metal atoms in the Keggin POM shows much higher capacitance than the corresponding W-containing ones. Moreover, compound 1@graphene oxide (GO) composite electrodes are fabricated and systematically explored for their supercapacitor performance. Thanks to the synergetic effects of GO and POM-incorporated metallacalixarenes, the compound 1@15%GO-based electrode exhibits the highest specific capacitance of up to 230.2 F g^-1 (current density equal to 0.5 A g^-1), which is superior to majority of the reported POM-based electrode materials.

Mo-Based crystal POMOFs with a high electrochemical capacitor performance

The capacitor performance of newly synthesized crystalline POMOFs was higher than those of the majority of reported POMOF-, state-of-the-art MOF- and POM-based materials.