Cellulose-based yellow-green emitting carbon dots with large Stokes shift as effective "turn off-on" fluorescence platforms for Cr (VI) and AA dual efficacy detection

BACKGROUND

Hexavalent chromium (Cr (VI)) is highly carcinogenic to humans. Ascorbic acid (AA) deficiency can be hazardous to health. And the dual-effect fluorescence detection of them is an important research topic. Carbon dots (CDs) based on cellulose are excellent candidates for the fluorescence probes due to their low cost and environmental friendliness. But most of them exhibit shortwave emission, small Stokes shift and poor fluorescence performance, all of which limit their use. Therefore, there is an urgent need for cellulose CDs with longer emission wavelengths and larger Stokes shifts in dual-effect fluorescence detection of Cr (VI) and AA.

RESULTS

Under optimal conditions (180 °C, 12 h), we prepared cellulose-based nitrogen-doped carbon dots (N-CDs) by a simple one-step hydrothermal process, which display longer emission wavelengths (ex: 370 nm, em: 510 nm), larger Stokes shifts (140 nm) and high fluorescence quantum yield (QY: 19.27 %). The continuous "turn-off" and "turn-off-on" fluorescence detection platforms were constructed based on the internal filtering effect (IFE) between Cr6+ and N-CDs, and Cr6+ reduced to Cr3+ by AA at pH = 6. The platform has been successfully simultaneous detect Cr (VI) and AA with a wide range of 0.01-40 μM and 0.1-100 μM. And the lowest limits of detection (LOD) are 0.0303 μM and 0.072 μM, respectively. In the presence of some other metals, non-metal ions and water-soluble acids in the fruits, this fluorescent platform can demonstrate a high level of interference immunity.

SIGNIFICANCE AND NOVELTY

This represents the first yellow-green cellulose-based N-CDs with large Stokes shift for dual-effect detection of Cr (VI) and AA in real water samples and fresh fruits. The fluorescence detection platform has the advantage of low volume detection. Less than 2 mL of sample is required for testing and results are available in <5 min. This method is rare and supply a novel idea for the quantitative monitoring of Cr (VI) and AA.

Using Cu2+ to regulate the emission feature of near-infrared fluorescent sensor with AIE: To detect ascorbic acid in food samples and its application in bioimaging

Conventional ascorbic acid (AA) detection methods such as chromatography, capillary electrophoresis, colorimetry, electrochemical detection, and enzymatic analysis require expensive equipment and complicated operation. Simple, rapid, and accurate AA detection is essential to inspect food quality, diagnose diseases, and assess immunity in humans. In this study, the first near-infrared fluorescence sensor DBHM with aggregation-induced emission was developed to detect AA under the involvement of Cu2+. The DBHM + Cu2+ sensor showed high sensitivity to AA with a limit of detection of 2.37 μM. The AA detection mechanism was investigated by optical studies, 1H NMR titration, high-resolution mass spectrometry, and infrared spectroscopy. AA was detected qualitatively and quantitatively by the DBHM + Cu2+ sensor in beverages, fruits, and Vitamin C tablets using a dual-mode (fluorescence and smartphone app) sensing platform. The new sensing system also showed low toxicity and excellent bioimaging in HeLa cells, C. elegans, and mice. This sensor could advance AA detection technology in the food industry and has potential bioimaging applications.

Design and degradation of permanently porous vitamin C and zinc-based metal-organic framework

Bioapplication is an emerging field of metal-organic frameworks (MOF) utilization, but biocompatible MOFs with permanent porosity are still a rarity in the field. In addition, biocompatibility of MOF constituents is often overlooked when designing bioMOF systems, intended for drug delivery. Herein, we present the a Zn(II) bioMOF based on vitamin C as an independent ligand (bioNICS-1) forming a three-dimensional chiral framework with permanent microporosity. Comprehensive study of structure stability in biorelavant media in static and dynamic conditions demonstrates relatively high structure resistivity, retaining a high degree of its parent specific surface area. Robustness of the 3D framework enables a slow degradation process, resulting in controllable release of bioactive components, as confirmed by kinetic studies. BioNICS-1 can thus be considered as a suitable candidate for the design of a small drug molecule delivery system, which was demonstrated by successful loading and release of urea-a model drug for topical application-within and from the MOF pores.

Fabricated Metal-Organic Frameworks (MOFs) as luminescent and electrochemical biosensors for cancer biomarkers detection

In the health domain, a major challenge is the detection of diseases using rapid and cost-effective techniques. Most of the existing cancer detection methods show poor sensitivity and selectivity and are time consuming with high cost. To overcome this challenge, we analyzed porous fabricated metal-organic frameworks (MOFs) that have better structures and porosities for enhanced biomarker sensing. Here, we summarize the use of fabricated MOF luminescence and electrochemical sensors in devices for cancer biomarker detection. Various strategies of fabrication and the role of fabricated materials in sensing cancer biomarkers have been studied and described. The structural properties, sensing mechanisms, roles of noncovalent interactions, limits of detection, modeling, advantages, and limitations of MOF sensors have been well-discussed. The study presents an innovative technique to detect the cancer biomarkers by the use of luminescence and electrochemical MOF sensors. In addition, the potential association studies have been opening the way for personalized patient treatments and the development of new cancer-detecting devices.

A Cd(ii)-organic framework as a highly sensitive and rapid fluorometric sensor for ascorbic acid in aqueous medium

A new Cd(ii) MOF was used as a fluorometric sensor for ascorbic acid in water, fruits, vegetables and human urine.

Employing Conductive Metal-Organic Frameworks for Voltammetric Detection of Neurochemicals

This paper describes the first implementation of an array of two-dimensional (2D) layered conductive metal-organic frameworks (MOFs) as drop-casted film electrodes that facilitate voltammetric detection of redox active neurochemicals in a multianalyte solution. The device configuration comprises a glassy carbon electrode modified with a film of conductive MOF (M₃HXTP₂; M = Ni, Cu; and X = NH, 2,3,6,7,10,11-hexaiminotriphenylene (HITP) or O, 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP)). The utility of 2D MOFs in voltammetric sensing is measured by the detection of ascorbic acid (AA), dopamine (DA), uric acid (UA), and serotonin (5-HT) in 0.1 M PBS (pH = 7.4). In particular, Ni₃HHTP₂ MOFs demonstrated nanomolar detection limits of 63 ± 11 nM for DA and 40 ± 17 nM for 5-HT through a wide concentration range (40 nM-200 μM). The applicability in biologically relevant detection was further demonstrated in simulated urine using Ni₃HHTP₂ MOFs for the detection of 5-HT with a nanomolar detection limit of 63 ± 11 nM for 5-HT through a wide concentration range (63 nM-200 μM) in the presence of a constant background of DA. The implementation of conductive MOFs in voltammetric detection holds promise for further development of highly modular, sensitive, selective, and stable electroanalytical devices.

A turn-on luminescent probe for Fe3+ and ascorbic acid with logic gate operation based on a zinc(ii)-based metal–organic framework

A zinc(ii)-based metal–organic framework exhibits fluorescence turn-on behaviour for Fe³⁺ and AA with high sensitivity and selectivity.

Post-synthetic modification of a metal–organic framework with a chemodosimeter for the rapid detection of lethal cyanide via dual emission

A post-synthetically modified chemodosimeter grafted MOF is presented for the selective, visual and fluorogenic detection of cyanide via dual emission.

Solvent triggering structural changes for two terbium-based metal–organic frameworks and their photoluminescence sensing

TbPDBA-8 and TbPDBA-9 have been obtained based on the same ligand, and have different structures and luminescence properties.

Recent Progress in Metal-Organic Framework (MOF) Based Luminescent Chemodosimeters

Metal-organic frameworks (MOFs), as a class of crystalline hybrid architectures, consist of metal ions and organic ligands and have displayed great potential in luminescent sensing applications due to their tunable structures and unique photophysical properties. Until now, many studies have been reported on the development of MOF-based luminescent sensors, which can be classified into two major categories: MOF chemosensors based on reversible host-guest interactions and MOF chemodosimeters based on the irreversible reactions between targets with a probe. In this review, we summarize the recently developed luminescent MOF-based chemodosimeters for various analytes, including H2S, HClO, biothiols, fluoride ions, redox-active biomolecules, Hg2+, and CN-. In addition, some remaining challenges and future perspectives in this area are also discussed.

Sequential and recyclable sensing of Fe3+ and ascorbic acid in water with a terbium(iii)-based metal-organic framework

A water-stable three-dimensional (3D) metal-organic framework (MOF) of {[Tb(Cmdcp)(H₂O)₃]₂(NO₃)₂·5H₂O}_n (1, H₃CmdcpBr = N-carboxymethyl-(3,5-dicarboxyl)pyridinium bromide) has been synthesized and characterized. MOF 1 is highly emissive, giving rise to green luminescence that can be quenched by Fe³⁺ due to the partial overlap of its excitation spectrum with the absorption spectrum of Fe³⁺. The subsequent introduction of ascorbic acid (AA) leads to the reduction of Fe³⁺ into Fe²⁺, accompanied by the near-entire recovery of MOF 1 emission. The density functional theory (DFT) calculation results support the proposed mechanism. Such a sensing cycle is further transferable to urine and serum samples with a satisfactory near-quantitative recovery, highlighting its good potential in biologically relevant applications.

Fabrication of a Luminescence-Silent System Based on a Post-Synthetic Modification Cd-MOFs: A Highly Selective and Sensitive Turn-on Luminescent Probe for Ascorbic Acid Detection

A unique three-dimensional luminescent metal-organic framework (Cd-MOFs), [Cd(tpbpc)₂]·2H₂O·DMF (Htpbpc = 4'-[4,2';6',4″]-terpyridin-4'-yl-biphenyl-4-carboxylic acid; DMF = dimethylformamide), was synthesized and structurally characterized; it exhibits excellent luminescent property and structural stability in aqueous solutions. Interestingly, an unparalleled luminescence-silent system CrO₄^2-@Cd-MOFs was successfully fabricated by postsynthetic modification of metal-organic frameworks. This luminescence-silent system represents a highly selective and sensitive turn-on luminescent responding to ascorbic acid. First, this advanced fluorescent sensor displays excellent performance for CrO₄^2- ions with a quenching of fluorescence intensity originating from fluorescence resonance energy transfer (FRET) mechanism. What's more, the fluorescent intensity of CrO₄^2-@Cd-MOFs system can be recovered (turn-on) for sensing ascorbic acid because of the elimination of FRET process. Such a novel fabrication strategy should offer the guidance to develop various MOFs-implicated luminescence-silent systems as "turn-on" sensors for detection of specific chemicals.