Highly Selective Carbon Dioxide Capture and Cooperative Catalysis of a Water-Stable Acylamide-Functionalized Metal-Organic Framework

TM-Free and TM-Catalyzed Mechanosynthesis of Functional Polymers

Mechanochemically induced methods are commonly used for the depolymerization of polymers, including plastic and agricultural wastes. So far, these methods have rarely been used for polymer synthesis. Compared to conventional polymerization in solutions, mechanochemical polymerization offers numerous advantages such as less or no solvent consumption, the accessibility of novel structures, the inclusion of co-polymers and post-modified polymers, and, most importantly, the avoidance of problems posed by low monomer/oligomer solubility and fast precipitation during polymerization. Consequently, the development of new functional polymers and materials, including those based on mechanochemically synthesized polymers, has drawn much interest, particularly from the perspective of green chemistry. In this review, we tried to highlight the most representative examples of transition-metal (TM)-free and TM-catalyzed mechanosynthesis of some functional polymers, such as semiconductive polymers, porous polymeric materials, sensory materials, materials for photovoltaics, etc.

An Upper Bound Visualization of Design Trade-Offs in Adsorbent Materials for Gas Separations: CO2 , N2 , CH4 , H2 , O2 , Xe, Kr, and Ar Adsorbents

The last 20 years have seen many publications investigating porous solids for gas adsorption and separation. The abundance of adsorbent materials (this work identifies 1608 materials for CO₂ /N₂ separation alone) provides a challenge to obtaining a comprehensive view of the field, identifying leading design strategies, and selecting materials for process modeling. In 2021, the empirical bound visualization technique was applied, analogous to the Robeson upper bound from membrane science, to alkane/alkene adsorbents. These bound visualizations reveal that adsorbent materials are limited by design trade-offs between capacity, selectivity, and heat of adsorption. The current work applies the bound visualization to adsorbents for a wider range of gas pairs, including CO₂ , N₂ , CH₄ , H₂ , Xe, O₂ , and Kr. How this visual tool can identify leading materials and place new material discoveries in the context of the wider field is presented. The most promising current strategies for breaking design trade-offs are discussed, along with reproducibility of published adsorption literature, and the limitations of bound visualizations. It is hoped that this work inspires new materials that push the bounds of traditional trade-offs while also considering practical aspects critical to the use of materials on an industrial scale such as cost, stability, and sustainability.

A stable lanthanum-based metal-organic framework as fluorescent sensor for detecting TNP and Fe3+ with hyper-sensitivity and ultra-selectivity

A new Lanthanum-based luminescent metal-organic framework, {[La(H₂O)₄(HL)]·H₂O} (1), has been successfully synthesized by employing 3,3',5,5'-azodioxybenzenetetracarboxylic acid (H₄L) as a rigid organic linker through the solvothermal reactions. 1 exhibits a two-dimensional (2D) layered structure and a three-dimensional (3D) supramolecular structure is formed by hydrogen bonds between the layers. Stability studies indicate that 1 has good chemical stability and thermostability. Meanwhile, the K_sv values for TNP is 4.61 × 10⁴ M^-1 with the LOD of 4.13 × 10^-6 M and the K_sv value for Fe³⁺ is 1.22 × 10⁴ M^-1 with the LOD of 1.72 × 10^-5 M, respectively, which demonstrated that 1 exhibits high sensitivity and excellent selectivity for the detection of TNP and Fe³⁺via fluorescence quenching. Significantly, 1 shows high regenerability after five recycling progress for sensing Fe³⁺. The possible mechanisms associated with the luminescent quenching are discussed in detail through some relevant experiments and tests, as well as the DFT calculations. Based on the above excellent properties of 1, it will have extremely potential to be used as a dual functional sensor for both detecting TNP and Fe³⁺ in aqueous solution, simultaneously.

Amide-Functionalized Metal-Organic Frameworks Coupled with Open Fe/Sc Sites for Efficient Acetylene Purification

Acetylene (C₂H₂) purification is of great importance for many chemical synthesis and processes. Metal-organic frameworks (MOFs) are widely used for gas adsorption and separation due to their variable structure and porosity. However, the exploitation of ideal MOF adsorbents for C₂H₂ keeps a challenging task. Herein, a combination of open metal sites (OMSs) and Lewis basic sites (LBSs) in robust MOFs is demonstrated to effectively promote the C₂H₂ purification performance. Accordingly, SNNU-37(Fe/Sc), two isostructural MOFs constituted by [Fe₃O(COO)₆] or [Sc₃O(COO)₆] trinuclear clusters and amide-functionalized tricarboxylate linkers, were designed with extra-stable 3,6-connected new architectures. Derived from the coexistence of high-density OMSs and LBSs, the C₂H₂ adsorption amounts of SNNU-37(Fe/Sc) are much higher than those values for C₂H₄ and CO₂. Theoretical IAST selectivity values of SNNU-37(Fe) are 2.4 for C₂H₂/C₂H₄ (50/50, v/v) and 9.9 for C₂H₂/CO₂ (50/50, v/v) at 298 K and 1 bar, indicating an excellent C₂H₂ separation ability. Experimental breakthrough curves also revealed that SNNU-37(Fe) could effectively separate C₂H₂/C₂H₄ and C₂H₂/CO₂ under ambient conditions. GCMC simulations further indicate that open Fe or Sc sites and amide groups mainly contribute to stronger adsorption sites for C₂H₂ molecules.

Highly efficient CO2 capture and conversion of a microporous acylamide functionalized rht-type metal–organic framework

A microporous acylamide functionalized rht-type MOF (HNUST-9) with Lewis acidic open copper sites and CO₂-philic acylamide groups exhibits high performance for CO₂ capture, separation and chemical conversion.

Trends in Solid Adsorbent Materials Development for CO2 Capture

A recent report from the United Nations has warned about the excessive CO₂ emissions and the necessity of making efforts to keep the increase in global temperature below 2 °C. Current CO₂ capture technologies are inadequate for reaching that goal, and effective mitigation strategies must be pursued. In this work, we summarize trends in materials development for CO₂ adsorption with focus on recent studies. We put adsorbent materials into four main groups: (I) carbon-based materials, (II) silica/alumina/zeolites, (III) porous crystalline solids, and (IV) metal oxides. Trends in computational investigations along with experimental findings are covered to find promising candidates in light of practical challenges imposed by process economics.

Recent Progress in Metal-Organic Framework (MOF) Based Luminescent Chemodosimeters

Metal-organic frameworks (MOFs), as a class of crystalline hybrid architectures, consist of metal ions and organic ligands and have displayed great potential in luminescent sensing applications due to their tunable structures and unique photophysical properties. Until now, many studies have been reported on the development of MOF-based luminescent sensors, which can be classified into two major categories: MOF chemosensors based on reversible host-guest interactions and MOF chemodosimeters based on the irreversible reactions between targets with a probe. In this review, we summarize the recently developed luminescent MOF-based chemodosimeters for various analytes, including H2S, HClO, biothiols, fluoride ions, redox-active biomolecules, Hg2+, and CN-. In addition, some remaining challenges and future perspectives in this area are also discussed.

Tailoring the structures and gas adsorption properties of copper–bent diisophthalate frameworks by a substituent-driven ligand conformation regulation strategy

A substituent-induced ligand conformation regulation strategy was employed to tailor the structures and gas adsorption properties of copper-bent diisophthalate frameworks.

A metal-organic framework based on a custom-designed diisophthalate ligand exhibiting excellent hydrostability and highly selective adsorption of C2H2 and CO2 over CH4

The ligand truncation strategy provides facile access to a wide variety of linkers for the construction of MOFs bearing diverse structures and intriguing properties. In this work, we employed this strategy to design and prepare a novel bent diisophthalate ligand, and used it to successfully construct a copper-based MOF ZJNU-51 with the formula of [Cu2L(H2O)2]·5DMF (H4L = 5,5'-(triphenylamine-4,4'-diyl) diisophthalic acid), which was thoroughly characterized by various techniques including FTIR, TGA, PXRD and single-crystal X-ray diffraction. ZJNU-51 is a two-fold interpenetrated network in which the single network consists of dicopper paddlewheel units connected by the organic ligands and contains open channels as well as six distinct types of metal-organic cages. Furthermore, gas adsorption properties with respect to C2H2, CO2, and CH4 were systematically investigated, demonstrating that ZJNU-51 is a highly promising material for C2H2/CH4 and CO2/CH4 separations. Specifically, the IAST adsorption selectivity at 298 K and 1 atm reaches 35.6 and 5.4 for the equimolar C2H2/CH4 and CO2/CH4 gas mixtures, respectively. More significantly, as revealed by PXRD and N2 adsorption measurements, ZJNU-51 exhibits excellent chemical stability, which lays a good foundation for its practical application.

Three isoreticular ssa-type MOFs derived from bent diisophthalate ligands: exploring the substituent effect on structural stabilities and selective C2H2/CH4 and CO2/CH4 adsorption properties

Three isoreticular ssa-type MOFs exhibit substituent-dependent framework stabilities against desolvation and gas adsorption properties.

An unprecedented water stable acylamide-functionalized metal–organic framework for highly efficient CH4/CO2 gas storage/separation and acid–base cooperative catalytic activity

HNUST-8 exhibits water stable, efficient CH₄/CO₂ storage and separation, acid–base cooperative catalytic activity in a tandem deacetalization Knoevenagel densation.

Three ligand-originated MOF isomers: the positional effect of the methyl group on structures and selective C2H2/CH4 and CO2/CH4 adsorption properties

The positional effect of the methyl group on structures and gas adsorption properties was explored in a copper-based MOF platform constructed from bent diisophthalate ligands bearing the methyl group at different positions.