Electrospun Composite Polymer Electrolyte Membrane Enabled with Silica‐Coated Silver Nanowires

Progress of Polymer Electrolytes Worked in Solid-State Lithium Batteries for Wide-Temperature Application

Solid-state Li-ion batteries have emerged as the most promising next-generation energy storage systems, offering theoretical advantages such as superior safety and higher energy density. However, polymer-based solid-state Li-ion batteries face challenges across wide temperature ranges. The primary issue lies in the fact that most polymer electrolytes exhibit relatively low ionic conductivity at or below room temperature. This sensitivity to temperature variations poses challenges in operating solid-state lithium batteries at sub-zero temperatures. Moreover, elevated working temperatures lead to polymer shrinkage and deformation, ultimately resulting in battery failure. To address this challenge of polymer-based solid-state batteries, this review presents an overview of various promising polymer electrolyte systems. The review provides insights into the temperature-dependent physical and electrochemical properties of polymers, aiming to expand the temperature range of operation. The review also further summarizes modification strategies for polymer electrolytes suited to diverse temperatures. The final section summarizes the performance of various polymer-based solid-state batteries at different temperatures. Valuable insights and potential future research directions for designing wide-temperature polymer electrolytes are presented based on the differences in battery performance. This information is intended to inspire practical applications of wide-temperature polymer-based solid-state batteries.

High-Stability Composite Solid Polymer Electrolyte Composed of PAEPU/PP Nonwoven Fabric for Lithium-Ion Batteries

Solid polymer electrolytes have attracted considerable attention, owing to their flexibility and safety. At present, poly(ethylene oxide) is the most widely studied polymer electrolyte matrix. It exhibits higher safety than the polyolefin diaphragm used in traditional lithium-ion batteries. However, it readily crystallizes at room temperature, resulting in low ionic conductivity, and the preparation process involves organic solvents. In this study, from the perspective of molecular design, solvent-free polyaspartate polyurea (PAEPU) and the cheap and easily available polypropylene (PP) nonwoven fabric were used as support materials for the PAEPU/PP composite solid polymer electrolyte (PAEPU/PP m -CPE). This CPE has good thermal stability, dimensional stability, flexibility, and mechanical properties. Among the different CPEs that were analyzed, PAEPU/PP10-CPE@20 had the highest ionic conductivity, which was reinforced with 10 g/m2 PP nonwoven fabric and the content of lithium salt was 20 wt %. Furthermore, PAEPU/PP10-CPE@20 exhibited the highest electrochemical stability with an electrochemical window value of 5.53 V. Moreover, the capacity retention rate of the Li//PAEPU/PP10-CPE@20//LiFePO4 half-cell was 96.82% after 150 cycles at 0.05 C and 60 °C, and the capacity recovery rate in the rate test reached 98.81%.

Smart and Multifunctional Materials Based on Electroactive Poly(vinylidene fluoride): Recent Advances and Opportunities in Sensors, Actuators, Energy, Environmental, and Biomedical Applications

From scientific and technological points of view, poly(vinylidene fluoride), PVDF, is one of the most exciting polymers due to its overall physicochemical characteristics. This polymer can crystalize into five crystalline phases and can be processed in the form of films, fibers, membranes, and specific microstructures, being the physical properties controllable over a wide range through appropriate chemical modifications. Moreover, PVDF-based materials are characterized by excellent chemical, mechanical, thermal, and radiation resistance, and for their outstanding electroactive properties, including high dielectric, piezoelectric, pyroelectric, and ferroelectric response, being the best among polymer systems and thus noteworthy for an increasing number of technologies. This review summarizes and critically discusses the latest advances in PVDF and its copolymers, composites, and blends, including their main characteristics and processability, together with their tailorability and implementation in areas including sensors, actuators, energy harvesting and storage devices, environmental membranes, microfluidic, tissue engineering, and antimicrobial applications. The main conclusions, challenges and future trends concerning materials and application areas are also presented.

Advancements in Performance Optimization of Electrospun Polyethylene Oxide-Based Solid-State Electrolytes for Lithium-Ion Batteries

Polyethylene oxide (PEO)-based solid-state electrolytes for lithium-ion batteries have garnered significant interest due to their enhanced potential window, high energy density, and improved safety features. However, the issues such as low ionic conductivity at ambient temperature, substantial ionic conductivity fluctuations with temperature changes, and inadequate electrolyte interfacial compatibility hinder their widespread applications. Electrospinning is a popular approach for fabricating solid-state electrolytes owing to its superior advantages of adjustable component constitution and the unique internal fiber structure of the resultant electrolytes. Thus, this technique has been extensively adopted in related studies. This review provides an overview of recent advancements in optimizing the performance of PEO solid-state electrolytes via electrospinning technology. Initially, the impacts of different lithium salts and their concentrations on the performance of electrospun PEO-based solid-state electrolytes were compared. Subsequently, research pertaining to the effects of various additives on these electrolytes was reviewed. Furthermore, investigations concerning the enhancement of electrospun solid-state electrolytes via modifications of PEO molecular chains are herein detailed, and lastly, the prevalent challenges and future directions of PEO-based solid-state electrolytes for lithium-ion batteries are summarized.

Polyaspartate Polyurea-Based Solid Polymer Electrolyte with High Ionic Conductivity for the All-Solid-State Lithium-Ion Battery

The existing in situ preparation methods of solid polymer electrolytes (SPEs) often require the use of a solvent, which would lead to a complicated process and potential safety hazards. Therefore, it is urgent to develop a solvent-free in situ method to produce SPEs with good processability and excellent compatibility. Herein, a series of polyaspartate polyurea-based SPEs (PAEPU-based SPEs) with abundant (PO)_x(EO)_y(PO)_z segments and cross-linked structures were developed by systematically regulating the molar ratios of isophorone diisocyanate (IPDI) and isophorone diisocyanate trimer (tri-IPDI) in the polymer backbone and LiTFSI concentrations via an in situ polymerization method, which gave rise to good interfacial compatibility. Furthermore, the in situ-prepared PAEPU-SPE@D₁₅ based on the IPDI/tri-IPDI molar ratio of 2:1 and 15 wt % LiTFSI exhibits an improved ionic conductivity of 6.80 × 10^-5 S/cm at 30 °C and could reach 10^-4 orders of magnitude when the temperature was above 40 °C. The Li|LiFePO₄ battery based on PAEPU-SPE@D₁₅ had a wide electrochemical stability window of 5.18 V, demonstrating a superior interface compatibility toward LiFePO₄ and the lithium metal anode, exhibited a high discharge capacity of 145.7 mAh g^-1 at the 100th cycle and a capacity retention of 96.8%, and retained a coulombic efficiency of above 98.0%. These results showed that the PAEPU-SPE@D₁₅ system displayed a stable cycle performance, excellent rate performance, and high safety compared with PEO systems, indicating that the PAEPU-based SPE system may play a crucial role in the future.