Trends in the Diversification of the Detergentome

Detergents are amphiphilic molecules that serve as enabling steps for today's world applications. The increasing diversity of the detergentome is key to applications enabled by detergent science. Regardless of the application, the optimal design of detergents is determined empirically, which leads to failed preparations, and raising costs. To facilitate project planning, here we review synthesis strategies that drive the diversification of the detergentome. Synthesis strategies relevant for industrial and academic applications include linear, modular, combinatorial, bio-based, and metric-assisted detergent synthesis. Scopes and limitations of individual synthesis strategies in context with industrial product development and academic research are discussed. Furthermore, when designing detergents, the selection of molecular building blocks, i. e., head, linker, tail, is as important as the employed synthesis strategy. To facilitate the design of safe-to-use and tailor-made detergents, we provide an overview of established head, linker, and tail groups and highlight selected scopes and limitations for applications. It becomes apparent that most recent contributions to the increasing chemical diversity of detergent building blocks originate from the development of detergents for membrane protein studies. The overview of synthesis strategies and molecular blocks will bring us closer to the ability to predictably design and synthesize optimal detergents for challenging future applications.

Glycolipid Biosurfactants in Skincare Applications: Challenges and Recommendations for Future Exploitation

The 21st century has seen a substantial increase in the industrial applications of glycolipid biosurfactant technology. The market value of the glycolipid class of molecules, sophorolipids, was estimated to be USD 409.84 million in 2021, with that of rhamnolipid molecules projected to reach USD 2.7 billion by 2026. In the skincare industry, sophorolipid and rhamnolipid biosurfactants have demonstrated the potential to offer a natural, sustainable, and skin-compatible alternative to synthetically derived surfactant compounds. However, there are still many barriers to the wide-scale market adoption of glycolipid technology. These barriers include low product yield (particularly for rhamnolipids) and potential pathogenicity of some native glycolipid-producing microorganisms. Additionally, the use of impure preparations and/or poorly characterised congeners as well as low-throughput methodologies in the safety and bioactivity assessment of sophorolipids and rhamnolipids challenges their increased utilisation in both academic research and skincare applications. This review considers the current trend towards the utilisation of sophorolipid and rhamnolipid biosurfactants as substitutes to synthetically derived surfactant molecules in skincare applications, the challenges associated with their application, and relevant solutions proposed by the biotechnology industry. In addition, we recommend experimental techniques/methodologies, which, if employed, could contribute significantly to increasing the acceptance of glycolipid biosurfactants for use in skincare applications while maintaining consistency in biosurfactant research outputs.

Sophorolipid Candidates Demonstrate Cytotoxic Efficacy against 2D and 3D Breast Cancer Models

Sophorolipids are biosurfactants derived from the nonpathogenic yeasts such as Starmerella bombicola with potential efficacy in anticancer applications. Simple and cost-effective synthesis of these drugs makes them a promising alternative to traditional chemotherapeutics, pending their success in preliminary drug-screening. Drug-screening typically utilizes 2D cell monolayers due to their simplicity and ease of high-throughput assessment. However, 2D assays fail to capture the complexity and 3D context of the tumor microenvironment and have consequently been implicated in the high percentage of drugs investigated in vitro that later fail in clinical trials. Herein, we screened two sophorolipid candidates and a clinically-used chemotherapeutic, doxorubicin, on in vitro breast cancer models ranging from 2D monolayers to 3D spheroids, employing optical coherence tomography to confirm these morphologies. We calculated corresponding IC50 values for these drugs and found one of the sophorolipids to have comparable toxicities to the chemotherapeutic control. Our findings show increased drug resistance associated with model dimensionality, such that all drugs tested showed that 3D spheroids exhibited higher IC50 values than their 2D counterparts. These findings demonstrate promising preliminary data to support the use of sophorolipids as a more affordable alternative to traditional clinical interventions and demonstrate the importance of 3D tumor models in assessing drug response.

Structure-Activity Relationship Assessment of Sophorolipid Ester Derivatives against Model Bacteria Strains

Sophorolipids (SLs) are glycolipids that consist of a hydrophilic sophorose head group covalently linked to a hydrophobic fatty acid tail. They are produced by fermentation of non-pathogenic yeasts such as Candida Bombicola. The fermentation products predominantly consist of the diacetylated lactonic form that coexists with the open-chain acidic form. A systematic series of modified SLs were prepared by ring opening of natural lactonic SL with n-alkanols of varying chain length under alkaline conditions and lipase-selective acetylation of sophorose primary hydroxyl groups. The antimicrobial activity of modified SLs against Gram-positive human pathogens was a function of the n-alkanol length, as well as the degree of sophorose acetylation at the primary hydroxyl sites. Modified SLs were identified with promising antimicrobial activities against Gram-positive human pathogens with moderate selectivity (therapeutic index, TI = EC50/MICB. cereus = 6-33). SL-butyl ester exhibited the best antimicrobial activity (MIC = 12 μM) and selectivity (TI = 33) among all SLs tested. Kinetic studies revealed that SL-ester derivatives kill B. cereus in a time-dependent manner resulting in greater than a 3-log reduction in cell number within 1 h at 2×MIC. In contrast, lactonic SL required 3 h to achieve the same efficiency.

Lactonic Sophorolipid Increases Surface Wettability of Poly-l-lactic Acid Electrospun Fibers

The hydrophobicity of electrospun poly-l-lactic acid (PLLA) fibers hinders their integration with surrounding tissue for a variety of applications. In this study, we increased PLLA fiber hydrophilicity by incorporating the natural surfactant, lactonic sophorolipid (LSL). PLLA+LSL fibers had similar fiber morphology but significantly greater surface wettability, which suggested LSL accumulation on the fiber surface. Differential scanning calorimetry results also suggested that LSL was phase separated from PLLA. Despite the altered surface wettability of these fibers, there was no change in fibroblast adhesion. Future studies may explore the use of this natural surfactant to deliver bioactive factors to enhance fibroblast adhesion.

Biosurfactant-functionalized porphyrin chromophore that forms J-aggregates

Synthesis of sophorolipid-porphyrin conjugates with built-in variations in non-covalent interactions, H–bonding, π–π stacking, and hydrophobic interactions for supramolecular self-assembly.

Fundamental Characterization of the Micellar Self-Assembly of Sophorolipid Esters

Surfactants are ubiquitous constituents of commercial and biological systems that function based on complex structure-dependent interactions. Sophorolipid (SL) n-alkyl esters (SL-esters) comprise a group of modified naturally derived glycolipids from Candida bombicola. Herein, micellar self-assembly behavior as a function of SL-ester chain length was studied. Surface tensions as low as 31.2 mN/m and critical micelle concentrations (CMCs) as low as 1.1 μM were attained for diacetylated SL-decyl ester (dASL-DE) and SL-octyl ester, respectively. For deacetylated SL-esters, CMC values reach a lower limit at SL-ester chains above n-butyl (SL-BE, 1-3 μM). This behavior of SL-esters with increasing hydrophobic tail length is unlike other known surfactants. Diffusion-ordered spectroscopy (DOSY) and T₁ relaxation NMR experiments indicate this behavior is due to a change in intramolecular interactions, which impedes the self-assembly of SL-esters with chain lengths above SL-BE. This hypothesis is supported by micellar thermodynamics where a disruption in trends occurs at n-alkyl ester chain lengths above those of SL-BE and SL-hexyl ester (SL-HE). Diacetylated (dA) SL-esters exhibit an even more unusual trend in that CMC increases from 1.75 to 815 μM for SL-ester chain lengths of dASL-BE and dASL-DE, respectively. Foaming studies, performed to reveal the macroscopic implications of SL-ester micellar behavior, show that the observed instability in foams formed using SL-esters are due to coalescence, which highlights the importance of understanding intermicellar interactions. This work reveals that SL-esters are an important new family of green high-performing surfactants with unique structure-property relationships that can be tuned to optimize micellar characteristics.

Current status in biotechnological production and applications of glycolipid biosurfactants

Biosurfactants are natural compounds with surface activity and emulsifying properties produced by several types of microorganisms and have been considered an interesting alternative to synthetic surfactants. Glycolipids are promising biosurfactants, due to low toxicity, biodegradability, and chemical stability in different conditions and also because they have many biological activities, allowing wide applications in different fields. In this review, we addressed general information about families of glycolipids, rhamnolipids, sophorolipids, mannosylerythritol lipids, and trehalose lipids, describing their chemical and surface characteristics, recent studies using alternative substrates, and new strategies to improve of production, beyond their specificities. We focus in providing recent developments and trends in biotechnological process and medical and industrial applications.

Effect of Sophorolipid n-Alkyl Ester Chain Length on Its Interfacial Properties at the Almond Oil-Water Interface

Sophorolipids (SLs), produced by Candida bombicola, are of interest as potential replacements for hazardous commercial surfactants. For the first time, a series of molecularly edited SLs with ethyl (EE), n-hexyl (HE), and n-decyl (DE) esters were evaluated at an oil (almond oil)-water interface for their ability to reduce interfacial tension (IFT) and generate stable emulsions. An increase in the n-alkyl ester chain length from ethyl to hexyl resulted in a maximum % decrease in the IFT from 86.1 to 95.3, respectively. Furthermore, the critical aggregation concentrations (CACs) decreased from 0.035 to 0.011 and 0.006 mg/mL as the ester chain length was increased from ethyl to n-hexyl and n-decyl, respectively. In contrast, the CAC of natural SL, composed of 50/50 acidic and LSL, is 0.142 mg/mL. Dynamic IFT analysis showed significant differences in diffusion coefficients for all SLs studied. Almond oil emulsions with up to 200:1 (by weight) oil/SL-DE were stable against oil separation for up to 1 week with average droplet sizes below 5 μm. Emulsions of almond oil with natural SLs showed consistent oil separation 24 h after emulsification. A unique connection between IFT and emulsification was found as SL-DE has both the lowest CAC and the best emulsification performance of all natural and modified SLs studied herein. This connection between CAC and emulsification may be generally applicable, providing a tool for the prediction of optimal surfactants in other oil-water interfacial applications.