The acyltransferase activity of lipase CAL-A allows efficient fatty acid esters formation from plant oil even in an aqueous environment

Revision of the sophorolipid biosynthetic pathway in Starmerella bombicola based on new insights in the substrate profile of its lactone esterase

BACKGROUND

Sophorolipids (SLs) are a class of natural, biodegradable surfactants that found their way as ingredients for environment friendly cleaning products, cosmetics and nanotechnological applications. Large-scale production relies on fermentations using the yeast Starmerella bombicola that naturally produces high titers of SLs from renewable resources. The resulting product is typically an extracellular mixture of acidic and lactonic congeners. Previously, we identified an esterase, termed Starmerella bombicola lactone esterase (SBLE), believed to act as an extracellular reverse lactonase to directly use acidic SLs as substrate.

RESULTS

We here show based on newly available pure substrates, HPLC and mass spectrometric analysis, that the actual substrates of SBLE are in fact bola SLs, revealing that SBLE actually catalyzes an intramolecular transesterification reaction. Bola SLs contain a second sophorose attached to the fatty acyl group that acts as a leaving group during lactonization.

CONCLUSIONS

The biosynthetic function by which the Starmerella bombicola 'lactone esterase' converts acidic SLs into lactonic SLs should be revised to a 'transesterase' where bola SL are the true intermediate. This insights paves the way for alternative engineering strategies to develop designer surfactants.

Temperature-dependent alcohol acyltransferase reactions as the main enzymatic way to produce short-chain (C4-C8) and medium-chain (C9-C13) esters over the whole Daqu-making process

BACKGROUND

The ester-synthesis enzymes influenced by environmental factors during Daqu-making process largely determine the flavor of Chinese liquor, but the main ester-synthesis enzyme and its key influencer remain unclear. Here, the volatile ester profiles over the whole Daqu-making process, under different treatments, for at least 90 days, were carefully analyzed, and the potential ester-synthesis enzymes, as well as their dependently environmental factors, were explored.

RESULTS

In the detected 46 volatile esters, only the short-chain (C4-C8) and medium-chain (C9-C13) ester content obviously changed, as the primary contributor discriminating different samples. Their trends were both consistent with that of the alcohols and the primary metabolism, which included alcohol acyltransferases (AATs) reaction with alcohols and acyl-CoAs as the substrates. Among the potential ester-synthesis enzymes, the typical AAT activity also exhibited the highest correlation with the short- and medium-chain esters (r > 0.78, P < 0.05). The Mantel test between environmental factors and ester production showed that temperature of Daqu was directly correlated with the short-chain esters (r = 0.58, P < 0.01) and AAT activity (r = 0.56, P < 0.01). Further, the short- and medium-chain ester content in Daqu under the treatment nearer to the reported optimal temperature of 40-50 °C of AATs reaction was overall higher than that of the other treatment Daqu.

CONCLUSION

This study revealed that the temperature-dependent AATs reaction was the main enzymatic method producing the short- and medium-chain esters over the whole Daqu-making process. The results could contribute to the flavor improvement of Baijiu. © 2022 Society of Chemical Industry.

Enhancing the Hydrolysis and Acyl Transfer Activity of Carboxylesterase DLFae4 by a Combinational Mutagenesis and In-Silico Method

In the present study, a feruloyl esterase DLFae4 identified in our previous research was modified by error-prone PCR and site-directed saturation mutation to enhance the catalytic efficiency and acyltransferase activity further. Five mutants with 6.9–118.9% enhanced catalytic activity toward methyl ferulate (MFA) were characterized under the optimum conditions. Double variant DLFae4-m5 exhibited the highest hydrolytic activity (270.97 U/mg), the Km value decreased by 83.91%, and the Kcat/Km value increased by 6.08-fold toward MFA. Molecular docking indicated that a complex hydrogen bond network in DLFae4-m5 was formed, with four of five bond lengths being shortened compared with DLFae4, which might account for the increase in catalytic activity. Acyl transfer activity assay revealed that the activity of DLFae4 was as high as 1550.796 U/mg and enhanced by 375.49% (5823.172 U/mg) toward 4-nitrophenyl acetate when residue Ala-341 was mutated to glycine (A341G), and the corresponding acyl transfer efficiency was increased by 7.7 times, representing the highest acyltransferase activity to date, and demonstrating that the WGG motif was pivotal for the acyltransferase activity in family VIII carboxylesterases. Further experiments indicated that DLFae4 and variant DLFae4 (A341G) could acylate cyanidin-3-O-glucoside effectively in aqueous solution. Taken together, our study suggested the effectiveness of error-prone PCR and site-directed saturation mutation to increase the specific activity of enzymes and may facilitate the practical application of this critical feruloyl esterase.

Tuning Selectivity in CalA Lipase: Beyond Tunnel Engineering

Engineering studies of Candida (Pseudozyma) antarctica lipase A (CalA) have demonstrated the potential of this enzyme in the selective hydrolysis of fatty acid esters of different chain lengths. CalA has been shown to bind substrates preferentially through an acyl-chain binding tunnel accessed via the hydrolytic active site; it has also been shown that selectivity for substrates of longer or shorter chain length can be tuned, for instance by modulating steric hindrance within the tunnel. Here we demonstrate that, whereas the tunnel region is certainly of paramount importance for substrate recognition, residues in distal regions of the enzyme can also modulate substrate selectivity. To this end, we investigate variants that carry one or more substitutions within the substrate tunnel as well as in distal regions. Combining experimental determination of the substrate selectivity using natural and synthetic substrates with computational characterization of protein dynamics and of tunnels, we deconvolute the effect of key substitutions and demonstrate that epistatic interactions contribute to procuring selectivity toward either long-chain or short/medium-chain fatty acid esters. We demonstrate that various mechanisms contribute to the diverse selectivity profiles, ranging from reshaping tunnel morphology and tunnel stabilization to obstructing the main substrate-binding tunnel, highlighting the dynamic nature of the substrate-binding region. This work provides important insights into the versatility of this robust lipase toward diverse applications.

Immobilization of Candida antarctica Lipase A onto Macroporous Resin NKA-9: Esterification and Glycerolysis Performance Study

In this study, lipase A from Candida antarctica (CALA) was immobilized onto the macroporous resin NKA-9. Immobilization conditions (pH, time and CALA concentration) were studied, enzymatic activity and immobilization efficiency (IE) up to 968.89 U/g and 53.19% were respectively obtained under optimal conditions (immobilization pH 5.0, time 5 h and CALA concentration at 30 mg/mL). Then, the NKA-9 supported CALA (CALA@NKA-9) samples were used to catalyze glycerolysis in solvent-free system. With 0.25 g of the present CALA@NKA-9 (soybean oil 3.52 g and glycerol 0.184 g) and after 12 h reaction at 50 °C, diacylglycerols (DAG) content up to 64.37% and triacylglycerols (TAG) conversion at 83.33% were obtained. The relationship between temperature and TAG conversion was LnV ₀ = 13.9310-6.4212/T for CALA@NKA-9. Meanwhile, the activation energy (Ea) of CALA@NKA-9 was calculated to be 53.39 kJ/mol. In addition, reusability in the glycerolysis reaction was also evaluated, and 57.82% of the initial glycerolysis activity was retained after 9 consecutive applications. Furthermore, the CALA@NKA-9 was also used to catalyze the esterification (esterification of fatty acids with glycerol), however, the present CALA@NKA-9 cannot initiate the esterification. Therefore, the present CALA@NKA-9 is shown to be potential for DAG production through glycerolysis reaction.

Fatty Acids and their Derivatives as Renewable Platform Molecules for the Chemical Industry

Oils and fats of vegetable and animal origin remain an important renewable feedstock for the chemical industry. Their industrial use has increased during the last 10 years from 31 to 51 million tonnes annually. Remarkable achievements made in the field of oleochemistry in this timeframe are summarized herein, including the reduction of fatty esters to ethers, the selective oxidation and oxidative cleavage of C-C double bonds, the synthesis of alkyl-branched fatty compounds, the isomerizing hydroformylation and alkoxycarbonylation, and olefin metathesis. The use of oleochemicals for the synthesis of a great variety of polymeric materials has increased tremendously, too. In addition to lipases and phospholipases, other enzymes have found their way into biocatalytic oleochemistry. Important achievements have also generated new oil qualities in existing crop plants or by using microorganisms optimized by metabolic engineering.

Rational Design for Enhanced Acyltransferase Activity in Water Catalyzed by the Pyrobaculum calidifontis VA1 Esterase

Biocatalytic transesterification is commonly carried out employing lipases in anhydrous organic solvents since hydrolases usually prefer hydrolysis over acyl transfer in bulk water. However, some promiscuous acyltransferases can catalyze acylation in an aqueous solution. In this study, a rational design was performed to enhance the acyltransferase selectivity and substrate scope of the Pyrobaculum calidifontis VA1 esterase (PestE). PestE wild type and variants were applied for the acylation of monoterpene alcohols. The mutant PestE_I208A is selective for (–)-menthyl acetate (E-Value = 55). Highly active acyltransferases were designed, allowing for complete conversion of (–)-citronellol to citronellyl acetate. Additionally, carvacrol was acetylated but with lower conversions. To the best of our knowledge, this is the first example of the biocatalytic acylation of a phenolic alcohol in bulk water. In addition, a high citronellol conversion of 92% was achieved with the more environmentally friendly and inexpensive acyl donor ethyl acetate using PestE_N288F as a catalyst. PestE_N288F exhibits good acyl transfer activity in an aqueous medium and low hydrolysis activity at the same time. Thus, our study demonstrates an alternative synthetic strategy for acylation of compounds without organic solvents.

Main Structural Targets for Engineering Lipase Substrate Specificity

Microbial lipases represent one of the most important groups of biotechnological biocatalysts. However, the high-level production of lipases requires an understanding of the molecular mechanisms of gene expression, folding, and secretion processes. Stable, selective, and productive lipase is essential for modern chemical industries, as most lipases cannot work in different process conditions. However, the screening and isolation of a new lipase with desired and specific properties would be time consuming, and costly, so researchers typically modify an available lipase with a certain potential for minimizing cost. Improving enzyme properties is associated with altering the enzymatic structure by changing one or several amino acids in the protein sequence. This review detailed the main sources, classification, structural properties, and mutagenic approaches, such as rational design (site direct mutagenesis, iterative saturation mutagenesis) and direct evolution (error prone PCR, DNA shuffling), for achieving modification goals. Here, both techniques were reviewed, with different results for lipase engineering, with a particular focus on improving or changing lipase specificity. Changing the amino acid sequences of the binding pocket or lid region of the lipase led to remarkable enzyme substrate specificity and enantioselectivity improvement. Site-directed mutagenesis is one of the appropriate methods to alter the enzyme sequence, as compared to random mutagenesis, such as error-prone PCR. This contribution has summarized and evaluated several experimental studies on modifying the substrate specificity of lipases.

Enzymatic Production of Biodiesel: Strategies to Overcome Methanol Inactivation

Lipase-catalyzed transesterification of triglycerides and alcohols to obtain biodiesel is an environmentally friendly and sustainable route for fuels production since, besides proceeding in mild reaction conditions, it allows for the use of low-cost feedstocks that contain water and free fatty acids, for example non-edible oils and waste oils. This review article reports recent advances in the field and focus in particular on a major issue in the enzymatic process, the inactivation of most lipases caused by methanol, the preferred acyl acceptor used for alcoholysis. The recent results about immobilization of enzymes on nano-materials and the use of whole-cell biocatalysts, as well as the use of cell-surface display technologies and metabolic engineering strategies for microbial production of biodiesel are described. It is discussed also insight into the effects of methanol on lipases obtained by modeling approaches and report on studies aimed at mining novel alcohol stable enzymes or at improving robustness in existing ones by protein engineering.