Physicochemical, rheological, and sensory properties of low-fat ice cream designed by double emulsions

Effects of ethanol addition on the quality and stability of Pickering emulsions: Developing Baijiu-infused ice cream

The application of Pickering emulsions in real food systems has attracted increasing research interest. Similarly, the tendency of incorporation of Chinese Baijiu into food products is also increasing. This study aimed to investigate the effects of ethanol addition (3 %-15 %, v/v) on the physicochemical, rheological properties and microstructure of Pickering emulsions. The results showed that ethanol resulted in a decrease in particle size, an increase in the apparent viscosity and in the proportion of adsorbed proteins at the oil-water interface of Pickering emulsions, resulting in an increase in emulsion stability. The results obtained from cryo-scanning electron microscopy showed that the incorporation of Baijiu improve the interaction between the fat globules at the interface, enhanced the film around the bubbles, and led to a reduction in the size and a more uniform distribution of air bubbles in the ice cream. These results indicate that the incorporation of a moderate amount (<15 %, v/v) of ethanol into the Pickering emulsion enhances its stability. Adding Baijiu to the preparation of plant-based ice cream resulted in a mellow texture, fine organization, and suitable hardness. These findings provide valuable information for potential application of ethanol, particularly Baijiu, in Pickering emulsion-based applications, including frozen products.

Characteristics of Pickering emulsions stabilized by microgel particles of five different plant proteins and their application

Pickering emulsions stabilized by protein particles are of great interest for use in real food systems. This study was to investigate the properties of microgel particles prepared from different plant proteins, i.e., soybean protein isolate (SPI), pea protein isolate (PPI), mung bean protein isolate (MPI), chia seed protein isolate (CSPI), and chickpea protein isolate (CPI). MPI protein particles had most desirable Pickering emulsion forming ability. The particles of SPI and PPI had similar particle size (316.23 nm and 294.80 nm) and surface hydrophobicity (2238.40 and 2001.13) and emulsion forming ability, while the CSPI and CPI particle stabilized emulsions had the least desirable properties. The MPI and PPI particle stabilized Pickering emulsions produced better quality ice cream than the one produced by SPI particle-stabilized emulsions. These findings provide insight into the properties of Pickering emulsions stabilized by different plant protein particles and help expand their application in emulsions and ice cream.

Edible polysaccharide-based oleogels and novel emulsion gels as fat analogues: A review

Polysaccharide-based oleogels and emulsion gels have become novel strategies to replace solid fats due to safe and plentiful raw material, healthier fatty acid composition, controllable viscoelasticity, and more varied nutrition/flavor embedding. Recently, various oleogelation techniques and novel emulsion gels have been reported further to enrich the potential of polysaccharides in oil structuring, in which a crucial step is to promote the formation of polysaccharide networks determining gel properties through different media. Meanwhile, polysaccharide-based oleogels and emulsion gels have good oil holding, nutrient/flavor embedding, and 3D food printability, and their applications as fat substitutes have been explored in foods. This paper comprehensively reviews the types, preparation methods, and mechanisms of various polysaccharide-based oleogels and emulsion gels; meanwhile, the food applications and new trends of polysaccharide-based gels are discussed. Moreover, some viewpoints about potential developments and application challenges of polysaccharide-based gels are mentioned. In the future, polysaccharide-based gels may be flexible materials for customized nutritional foods and molecular gastronomy. However, it is still a challenge to select the appropriate oleogels or emulsion gels to meet the requirements of the products. Once this issue is addressed, oleogels and emulsion gels are anticipated to be used widely.

Effect of classical and molecular production techniques on physical properties and volatile compounds of berry ice-creams

This study aims to investigate some chemical, physical, textural, and aroma compounds properties of the ice-cream with berry fruits produced using classical and molecular ice-cream production techniques. No significant difference was determined between the pH, dry solid, fat, protein, ash amounts, and overrun of the samples. However, molecular ice-creams, in particular, have a softer structure since they contain tiny ice crystals, and the first dripping and full melting time was realized in less time. The effect of added fruit variety on the viscosity value of the samples was found to be significant. It was observed that the volatile compound profiles of the ice-creams were affected differently by ice-cream production techniques. The octanoic, hexanoic, and dodecanoic acid were high-value prominent compounds in all the ice creams. Furthermore, the 14 volatile compounds that are effective in the difference between the ice-creams and their production techniques were determined, which is more important in the ice cream aroma. This is the first study on the change of the volatile compounds, hence the aroma compound profile, in molecular ice-cream production technique. And, it was presented as an innovative approach. Therefore, it is thought to be shed new light on future studies.

Inulin-type fructans and short-chain fructooligosaccharides-their role within the food industry as fat and sugar replacers and texture modifiers-what needs to be considered!

Inulin and oligofructose are classes of prebiotics belonging to a group of nondigestible carbohydrates referred to as inulin-type fructans. While short-chain fructooligosaccharides are enzymatically synthesized from the hydrolysis and transglycosylation of sucrose. Inulin-type fructans and short-chain fructooligosaccharides act as carbon sources for selective pathways supporting digestive health including altering the composition of the gut microbiota along with improving transit time. Due to their physicochemical properties, inulin-type fructans and short-chain fructooligosaccharides have been widely used in the food industry as partial replacements for both fat and sugar. Yet, levels of replacement need to be carefully considered as it may result in changes to physical and sensory properties that could be detected by consumers. Furthermore, it has been reported depending on the processing parameters used during production that inulin-type fructans and short-chain fructooligosaccharides may or may not undergo structural alterations. Therefore, this paper reviews the role of inulin-type fructans and short-chain fructooligosaccharides within the food industry as fat and sugar replacers and texture modifiers, their impact on final sensory properties, and to what degree processing parameters are likely to impact their functional properties.

Evaluation of the Characteristics of Sheep's and Goat's Ice Cream, Produced with UF Concentrated Second Cheese Whey and Different Starter Cultures

Second cheese whey (SCW) is the by-product resulting from the manufacture of whey cheeses. In the present work, sheep (S) and goat (G) SCW concentrated by ultrafiltration (UF) were used in the production of ice creams. Concentrated liquid SCW samples with inulin added as a prebiotic were fermented with yoghurt, kefir and probiotic commercial cultures before being frozen in a horizontal frozen yoghurt freezer. The physicochemical, microbiological and sensory properties of the products were evaluated over 120 days of frozen storage. The products presented significant differences regarding these properties, specifically the higher total solids and protein contents of sheep's ice creams, which were higher compared to their goat ice cream counterparts. Sheep's ice creams also presented higher hardness and complex viscosity, which increased with storage. These ice creams also presented higher overrun and lower meltdown rates. The color parameters of the ice creams showed significant differences between formulations resulting from storage time. In all cases, Lactobacilli sp. cell counts were higher than log 6 CFU/g at the first week of storage. In the case of sheep's ice creams these values were maintained or increased until the 30th day, but decreased until the 60th day. Lactococci sp. counts surpassed log 7 CFU/g in all products, and these values were maintained until the end of storage, except in the case of G-Yoghurt and G-Kefir. Concerning the products containing probiotics, the sum of Lactococci sp. and Lactobacilli sp. counts was of the order log 8-9 CFU/g until the 60th day of storage, indicating that the probiotic characteristics of ice creams were maintained for at least 2 months. All products were well accepted by the consumer panel. Sheep's SCW ice creams were better rated regarding aroma, taste and texture. However, only the ranking test was able to differentiate preferences among formulations.

W/o/w multiple emulsions: A novel trend in functional ice cream preparations?

•

The possible applications of w/o/w multiple emulsions (MEs) in ice creams are described.

•

W/o/w MEs enable the encapsulation of sensitive compounds.

•

Fat content is reduced using w/o/w MEs without losing the creaminess of the final products.

•

Ice cream is a very suitable matrix for application of Pickering emulsions.

Ice cream is a popular product worldwide. Unfortunatelly, it contains a significant amount of fat. In this review, promising strategies for the use of w/o/w multiple emulsion structures in creams are assessed. W/o/w multiple emulsions (MEs) enable reduction the fat without losing the creamy taste and mouthfeel and also encapsulation of sensitive compounds. The encouraging application and formation of MEs in ice cream mixtures is supported by the use of natural food ingredients, such as fiber, which helps to stabilize the whole system and improves nutritional value. The future trends may be focused on the target stabilizations using Pickering paticles (PPs). The possible advantages, manufacture, evaluation methods, and predicted future prospects of MEs in ice creams are discussed.

Cost-Effective Synthesis of Bacterial Cellulose and Its Applications in the Food and Environmental Sectors

Bacterial cellulose (BC), also termed bio-cellulose, has been recognized as a biomaterial of vital importance, thanks to its impressive structural features, diverse synthesis routes, high thermomechanical properties, and its ability to combine with multiple additives to form composites for a wide range of applications in diversified areas. Its purity, nontoxicity, and better physico-mechanical features than plant cellulose (PC) make it a better choice for biological applications. However, a major issue with the use of BC instead of PC for various applications is its high production costs, mainly caused by the use of expensive components in the chemically defined media, such as Hestrin-Schramm (HS) medium. Furthermore, the low yield of BC-producing bacteria indirectly accounts for the high cost of BC-based products. Over the last couple of decades, extensive efforts have been devoted to the exploration of low-cost carbon sources for BC production, besides identifying efficient bacterial strains as well as developing engineered strains, developing advanced reactors, and optimizing the culturing conditions for the high yield and productivity of BC, with the aim to minimize its production cost. Considering the applications, BC has attracted attention in highly diversified areas, such as medical, pharmaceutics, textile, cosmetics, food, environmental, and industrial sectors. This review is focused on overviewing the cost-effective synthesis routes for BC production, along with its noteworthy applications in the food and environmental sectors. We have made a comprehensive review of recent papers regarding the cost-effective production and applications of BC in the food and environmental sectors. This review provides the basic knowledge and understanding for cost-effective and scaleup of BC production by discussing the techno-economic analysis of BC production, BC market, and commercialization of BC products. It explores BC applications as food additives as its functionalization to minimize different environmental hazards, such as air contaminants and water pollutants.

Bio Discarded from Waste to Resource

The modern linear agricultural production system allows the production of large quantities of food for an ever-growing population. However, it leads to large quantities of agricultural waste either being disposed of or treated for the purpose of reintroduction into the production chain with a new use. Various approaches in food waste management were explored to achieve social benefits and applications. The extraction of natural bioactive molecules (such as fibers and antioxidants) through innovative technologies represents a means of obtaining value-added products and an excellent measure to reduce the environmental impact. Cosmetic, pharmaceutical, and nutraceutical industries can use natural bioactive molecules as supplements and the food industry as feed and food additives. The bioactivities of phytochemicals contained in biowaste, their potential economic impact, and analytical procedures that allow their recovery are summarized in this study. Our results showed that although the recovery of bioactive molecules represents a sustainable means of achieving both waste reduction and resource utilization, further research is needed to optimize the valuable process for industrial-scale recovery.

The Effect of Cold Press Chia Seed Oil By-Products on the Rheological, Microstructural, Thermal, and Sensory Properties of Low-Fat Ice Cream

This study aimed to investigate the utilization of cold-pressed chia-seed oil by-products (CSOB) in a low-fat ice cream formulation as a fat replacer and stabilizer. In the study, ice cream emulsion mixtures were formulated by using 0.2–0.4% xanthan gum (XG), 2.5–12.5% fat, and 1–3% CSOB. Optimization was performed using the response surface methodology (RSM) and full factorial central composite design (CCD) based on the flow behavior rheological properties of the emulsions obtained from 17 different experimental points. All of the emulsion samples showed non-Newtonian shear-thinning flow behavior. The consistency coefficient (Κ) values of the emulsion samples were found to be 4.01–26.05 Pasⁿ and were significantly affected by optimization parameters (p < 0.05). The optimum formulation was determined as 0.29% XG, 2.5% CSOB, 2.5% fat. The low-fat (LF-IC) and full-fat control samples (FF-IC) were compared to samples produced with an optimum formulation (CBLF-IC) based on the steady shear, frequency sweep, and 3-ITT (three interval thixotropy test) rheological properties, thermal properties, emulsion stability, light microscope images, and sensory quality. CBLF-IC showed similar rheological behavior to FF-IC. The mix of CBLF-IC showed higher emulsion stability and lower poly-dispersity index (PDI) value and fat globule diameters than those of FF-IC and LF-IC. The thermal properties of the samples were significantly affected by the addition of CSOB in an ice cream mix. CBLF-IC exhibited a lower temperature range (ΔT), enthalpy of fusion (ΔH_f), and freezing point temperature (T_f) than those of FF-IC and LF-IC. While CBLF-IC exhibited a higher overrun value than other samples, it showed similar sensory properties to the FF-IC sample. The results of this study suggested that CSOB could be used successfully in low-fat ice cream production. This study also has the potential to gain new perspectives for the evaluation of CSOB as a fat substitute in a low-fat ice cream.

Microstructure and Physicochemical Properties of Light Ice Cream: Effects of Extruded Microparticulated Whey Proteins and Process Design

This study aimed to understand the influence of extruded microparticulated whey proteins (eMWPs) and process design in light ice cream processing by evaluating the microstructure and physicochemical properties. The inulin (T1), a commercial microparticulated whey protein (MWP) called simplesse (T2), a combination (T3), as well as eMWPs (as 50% volume of total particles): d50 < 3 µm (T4), and d50 > 5 µm (T5) were used as fat replacers. The first process design was pasteurization with subsequent homogenization (PH). The second process was homogenization with subsequent pasteurization (HP) for the production of ice cream (control, 12% fat, w/w; T1 to T5, 6% fat, w/w). The overrun of light ice cream treatments of PH was around 50%, except for T4 (61.82%), which was significantly higher (p < 0.01). On the other hand, the overrun of HP was around 40% for all treatments except T1. In both the PH and HP groups, the color intensities of treatments were statistically significant (p < 0.001). The melting behavior of light ice cream was also significantly different. The viscosity of all treatments was significant (p < 0.05) at a shear rate of 64.54 (1/s) for both cases of process design. A similar firmness in both the PH and HP groups was observed; however, the products with eMWPs were firmer compared to other light ice creams.

Emulsion, hydrogel and emulgel systems and novel applications in cannabinoid delivery: a review

Emulsions, hydrogels and emulgels have attracted a high interest as tools for the delivery of poorly soluble hydrophobic nutraceuticals by enhancing their stability and bioavailability. This review provides an overview of these delivery systems, their unique qualities and their interactions with the human gastrointestinal system. The modulation of the various delivery systems to enhance the bioavailability and modify the release profile of bioactive encapsulates is highlighted. The application of the delivery systems in the delivery of cannabinoids is also discussed. With the recent increase of cannabis legalization across North America, there is much interest in developing cannabis edibles which can provide a consistent dose of cannabinoids per portion with a rapid time of onset. Indeed, the long time of onset of psychoactive effects and varied metabolic responses to these products result in a high risk of severe intoxication due to overconsumption. Sophisticated emulsion or hydrogel-based delivery systems are one potential tool to achieve this goal. To date, there is a lack of evidence linking specific classes of delivery systems with their pharmacokinetic profiles in humans. More research is needed to directly compare different classes of delivery systems for the gastrointestinal delivery of cannabinoids.

Determination of Formulation Conditions Allowing Double Emulsions Stabilized by PGPR and Sodium Caseinate to Be Used as Capsules

Water-in-oil-in-water (W₁/O/W₂) double emulsions stabilized by polyglycerol polyricinoleate (PGPR), a lipophilic food grade small polymer, and sodium caseinate, a hydrophilic milk protein, were developed to encapsulate vitamin B12, a model hydrophilic substance easy to titrate. Using rheology, sensitive to drop size evolution and water fluxes, static light scattering, and microscopy both giving the evolution of drops' size and vitamin B12 titration assessing the encapsulation, we were able to detect independently the double emulsion drop size, the encapsulation loss, and the flux of water as a function of time. By differentiating the PGPR required to cover the W₁-droplets' surface from PGPR in excess in the oil phase, we built a PGPR-inner droplet volume fraction diagram highlighting the domains where the double emulsion is stable toward encapsulation and/or water fluxes. We demonstrated the key role played by nonadsorbed PGPR concentration in the intermediate sunflower oil phase on the emulsion stability while, surprisingly, the inner droplet volume fraction had no effect on the emulsion stability. At low PGPR concentration, a release of vitamin B12 was observed and the leakage mechanism of coalescence between droplets and oil-water interface of the oily drops (also called globules hereafter), was identified using confocal microscopy. For high enough PGPR content, the emulsions were stable and may therefore serve as efficient capsules without need of an additional gelling, thickening, complexion or interface rigidifying agent. We generalized these results with the encapsulation of an insecticide: Cydia pomonella granulovirus used in organic arboriculture.