Physicochemical Properties of Enzymatically Produced Palm-Oil-Based Cocoa Butter Substitute (CBS) With Cocoa Butter Mixture

Potential use of red hibiscus flower extract for the production of spray-chilled microparticles: Characterization, stability, and bioaccessibility in vitro of anthocyanins

Microparticles (MLP) containing red hibiscus flower (Hibiscus rosa-sinensis) anthocyanins were produced by spray chilling, and characterized for physicochemical parameters, accelerated stability, and gastrointestinal release profile. Fully hydrogenated palm oil and cocoa butter were used as wall materials, at a lipid blend to hibiscus extract ratio of 70:30 (w/w). The lipid blends containing fully hydrogenated palm oil (FHPO) and cocoa butter (CB) were produced by ultrasound-assisted technique in the following FHPO to CB ratios: 100:0 (Control), 75:25, 50:50, 60:40, and 40:60. Increasing the cocoa butter content reduced the melting temperature and increased the unstable polymorphic behavior of the microparticles, resulting in amorphous characteristics. The microparticles exhibited higher viscosity, more agglomerates, and holes on the surface, and greater diameters. Characteristic peaks corresponding to the hibiscus extract were observed in the infrared spectra of the spray-chilled microparticles, indicating that the microencapsulation did not affect the anthocyanins. The antioxidant capacity of the red hibiscus anthocyanins ranged from 75 % to 79 %, with the best result observed for the treatment MLP_75:25. Higher antioxidant activities were observed for the lipid blends containing lower cocoa butter concentrations. Concerning the release profile of anthocyanins, the simulated GI digestion in vitro showed reduced release in the gastric tract and more intense release in the intestinal tract for an effective absorption of the antioxidant compounds in the small intestine. Furthermore, the treatment MLP_75:25 showed the highest encapsulation retention and lower total color difference in the accelerated stability study. Overall, the microparticles from all treatments were light-sensitive and thermosensitive at 35 °C. Thus, it is recommended to store the particles in a dark environment at temperatures below 35 °C for an effective use of the microparticles as natural food colorants.

Physical Blending of Fractionated Bambangan Kernel Fat Stearin and Palm Oil Mid-Fraction to Formulate Cocoa Butter Equivalent

In this study, the physicochemical properties, composition, thermal properties, and crystal microstructure of fractionated bambangan kernel fat stearin and palm oil mid-fraction blends were investigated with respect to a potential cocoa butter equivalent. The blends were prepared in five ratios, and all of the blends exhibited similar physicochemical properties to cocoa butter. Although all of the blends had similar physicochemical properties, the blend containing 70% bambangan kernel fat stearin and 30% palm oil mid-fraction showed remarkable similarity to cocoa butter. The blend had similar fatty acid and triacylglycerol content to cocoa butter with 18.74% palmitic acids, 38.26% stearic acids, 34.05% oleic acids, 15.20% 1,3-dipalmitoyl-2-oleoyl glycerol, and 29.74% 1,3-disteroyl-2-oleoyl glycerol with improved thermostability (high solid fat content at 30 °C but reaching 0% at 40 °C). It also exhibited spherulite crystals with a needle-like crystal structure of 50 µm. This mixture showed good compatibility with cocoa butter at all mixing ratios; hence, it is suggested as a potential cocoa butter equivalent.

Potential benefits of structured lipids in bulk compound chocolate: Insights on bioavailability and effect on serum lipids

The bioavailability impact of serum lipids in compound chocolate products based on structured lipids was studied. Compound chocolate products containing fat with and without structured lipids were digested in vitro under simulated gastrointestinal lipolysis conditions and were studied in vivo in healthy C57BL/6J mice. The in vitro digestion results show that products containing structured lipids, milk compound chocolate filling and white compound coating, significantly reduced the release rate of Free Fatty Acids (FFA) and improved the caloric reduction between 12.49% and 13.71% compared to products without structured lipids, suggesting that FFA were not absorbed. Animal feeding studies revealed no adverse effects on the compound products intake; in fact, these products reduced total cholesterol, LDL-c, VLDL-c and triacylglycerols. The present work shows the relevance of developing functional compound chocolate as providing a potential healthy initiative through the biological effect of the bioactive ingredients incorporated.

Characterization of functional chocolate formulated using oleogels derived from β-sitosterol with γ-oryzanol/lecithin/stearic acid

With an aim to prepare the functional chocolate, corn oil was used as the base oil and β-sitosterol was combined with oryzanol/stearic acid/lecithin to prepare respective oleogels (GO, SO, and LO). Oleogels (12%) were prepared by adding compound oleogelators at different ratios [GO-2:3, SO-1:4, and LO-4:1 (w/w)] in corn oil. The microstructure, interaction, thermodynamic, crystalline, and rheological behavior of formulated oleogels were studied by microscopic observation, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and rotational rheometer, respectively. The results showed that GO had the strongest gel forming ability and the densest gel crystallization network. Moreover, chocolate prepared with GO (cocoa butter and oleogels-1:1) had the similar texture, crystal structure, rheological, and sensory properties to that of dark chocolate. This study provides the possibility for the wider application of oleogel prepared with lower saturated and trans-fatty acids in the chocolate industry.

Analysis of the effect of recent reformulation strategies on the crystallization behaviour of cocoa butter and the structural properties of chocolate

Chocolate is a complex soft material characterized by solid particles (cocoa powder, milk solid particles and sugar crystals) dispersed in a crystallized fat matrix mostly composed of cocoa butter (CB). Important chocolate properties such as snap, and visual appearance are strongly dependent on the internal molecular arrangement (polymorph), size and shape, as well as the spatial distribution of CB crystals within the chocolate mix. In recent years confectionary companies have put increasing effort in developing novel chocolate recipes to improve the nutritional profile of chocolate products (e.g., by reducing the amount of high saturated fat and sugar content) and to counteract the increasing price of cocoa butter as well as sustainability issues related to some chocolate ingredients. Different reformulation strategies can dramatically affect the crystallization thermodynamic and kinetic behaviour of cocoa butter; therefore, affecting the structural and sensorial properties of chocolate. In this review we analyse how different reformulation strategies affect the crystallization behaviour of cocoa butter and, hence, the structural and sensorial properties of chocolate. In particular, this work discusses the effect of: (1) CB replacement with emulsions, hydrogels, oleogels and oleofoams; (2) CB dilution with limonene or cocoa butter equivalents; (3) replacement or reduction of the amount of sugar and milk in chocolate. We found that there is certainly potential for successful novel alternative chocolate products with controlled crystalline properties; however, further research is still needed to ensure sensory acceptance and reasonable shelf-life of these novel products.

Graphene Oxide Increases Corneal Permeation of Ciprofloxacin Hydrochloride from Oleogels: A Study with Cocoa Butter-Based Oleogels

In this work, oleogels of cocoa butter (CB), rice bran oil (RBO), and graphene oxide (GO) were prepared. The prepared oleogels were subjected to various characterization techniques such as bright-field microscopy, X-ray diffraction (XRD), crystallization kinetics, differential scanning calorimetry (DSC), and mechanical studies. The influence of increasing GO content on the in vitro drug release and ex vivo corneal permeation of the model drug (ciprofloxacin HCl-CPH) from the oleogels was also investigated. Bright-field micrographs showed that increment in GO content reduced the size of the globular particles of CB. XRD analysis revealed that CB was crystallized in its β' and β polymorphic forms in the oleogels, which was in agreement with thermal studies. The mechanical characterization demonstrated that the presence of GO improved the elastic nature and stress-bearing properties of the oleogels. Moreover, GO altered the crystallization kinetics of CB in the oleogels in a composition-dependent manner. The in vitro release of CPH from the oleogels occurred through either Fickian diffusion or fat network relaxation or a combination thereof. Furthermore, the inclusion of GO enhanced the ex vivo permeation of CPH molecules across the caprine cornea. Hence, we concluded that the prepared oleogels could be explored as potential delivery systems for ophthalmic applications.

Rhizopus oryzae Lipase, a Promising Industrial Enzyme: Biochemical Characteristics, Production and Biocatalytic Applications

Lipases are biocatalysts with a significant potential to enable a shift from current pollutant manufacturing processes to environmentally sustainable approaches. The main reason of this prospect is their catalytic versatility as they carry out several industrially relevant reactions as hydrolysis of fats in water/lipid interface and synthesis reactions in solvent-free or non-aqueous media such as transesterification, interesterification and esterification. Because of the outstanding traits of Rhizopus oryzae lipase (ROL), 1,3-specificity, high enantioselectivity and stability in organic media, its application in energy, food and pharmaceutical industrial sector has been widely studied. Significant advances have been made in the biochemical characterisation of ROL particularly in how its activity and stability are affected by the presence of its prosequence. In addition, native and heterologous production of ROL, the latter in cell factories like Escherichia coli, Saccharomyces cerevisiae and Komagataella phaffii (Pichia pastoris), have been thoroughly described. Therefore, in this review, we summarise the current knowledge about R. oryzae lipase (i) biochemical characteristics, (ii) production strategies and (iii) potential industrial applications.

Evaluation of enzymatic interesterification in structured triacylglycerols preparation: a concise review and prospect

Enzymatic interesterification (EIE) is one of the emerging technologies in the specialty fats industry. EIE has several advantages over the conventional chemical interesterification method, such that the process has higher flexibility and efficiency, is environmentally friendly and the immobilized enzyme can be recycled besides of the lower requirement for substrate's acid value. The physical properties and nutritional qualities of the fats and oils are modified after EIE, depending on the change in the position of fatty acids on the triacylglycerol (TAG) molecules. Evaluation of the interesterification reaction are important and useful in terms of its technological applications. This paper summarizes the conventional methods and the advancement for evaluating EIE processes, e.g., determination of the change in slip melting points, solid fat contents, TAG with equivalent carbon numbers, and sn-2 fatty acid compositions of the end product. Nonetheless, these methods are not comprehensive because during the EIE process, acyl migration occurs. A novel and convenient evaluation model which is based on the fatty acid distribution on the glycerol-backbone is proposed as a perspective. This model can be employed to monitor the interesterification degree and acyl migration during a regiospecific EIE process, which serves as a reaction rule that can be employed to control and optimize the EIE process, thereby producing structured TAG with desired properties.

Synthesis, physicochemical properties, and health aspects of structured lipids: A review

Structured lipids (SLs) refer to a new type of functional lipids obtained by chemically, enzymatically, or genetically modifying the composition and/or distribution of fatty acids in the glycerol backbone. Due to the unique physicochemical characteristics and health benefits of SLs (for example, calorie reduction, immune function improvement, and reduction in serum triacylglycerols), there is increasing interest in the research and application of novel SLs in the food industry. The chemical structures and molecular architectures of SLs define mainly their physicochemical properties and nutritional values, which are also affected by the processing conditions. In this regard, this holistic review provides coverage of the latest developments and applications of SLs in terms of synthesis strategies, physicochemical properties, health aspects, and potential food applications. Enzymatic synthesis of SLs particularly with immobilized lipases is presented with a short introduction to the genetic engineering approach. Some physical features such as solid fat content, crystallization and melting behavior, rheology and interfacial properties, as well as oxidative stability are discussed as influenced by chemical structures and processing conditions. Health-related considerations of SLs including their metabolic characteristics, biopolymer-based lipid digestion modulation, and oleogelation of liquid oils are also explored. Finally, potential food applications of SLs are shortly introduced. Major challenges and future trends in the industrial production of SLs, physicochemical properties, and digestion behavior of SLs in complex food systems, as well as further exploration of SL-based oleogels and their food application are also discussed.

Effects of chemical interesterification on the triacylglycerols, solid fat contents and crystallization kinetics of palm oil-based fats

The effects of chemical interesterification (CIE) on the physicochemical properties and crystallization kinetics of oil blends containing palm oil (PO) in combination with six other types of oils were studied.