Polymer‐Supported Chiral Organocatalysts: Synthetic Strategies for the Road Towards Affordable Polymeric Immobilization

Asymmetric Aldol Reactions Catalyzed by Polymeric Self-Assembly with Side-Chain Dipeptide Pendants

To explore the role of proline amide moieties in polymer-supported organocatalysts, side-chain l-proline-l-alanine (Pro-Ala) dipeptide-containing block copolymers were synthesized, and their catalytic potential for the aldol reaction was explored. The dipeptide monomer (Boc-Pro-Ala-HEMA) was polymerized to prepare block copolymers in the presence of hydrophilic poly(poly(ethylene glycol) methyl ether methacrylate) (PPEGMA) and hydrophobic poly(methyl methacrylate) (PMMA) macro-chain transfer agents. Boc group expulsion from the block copolymers produced double hydrophilic PPEGMA-b-P(Pro-Ala-HEMA) (1b) and amphiphilic PMMA-b-P(Pro-Ala-HEMA) (1c) polymers. The solution behaviors of the polymers were studied by various physical techniques, which showed the formation of self-assembled aggregates of 1c in water and N,N-dimethylformamide (DMF)/water solvent mixtures. These polymers are used as organocatalysts during the aldol reaction of cyclohexanone and 4-nitrobenzaldehyde in different solvent polarities, catalyst loadings, temperatures, and reaction times. This work emphasizes superior catalytic activity of 1c at lower catalyst loadings (5%) while maintaining high conversion (95%) and enantioselectivity (94%) across multiple recycling cycles in DMF/water at a 3:1 ratio (v/v).

Primary amines as heterogeneous catalysts in an enantioselective [2,3]-Wittig rearrangement reaction

A series of heterogeneous catalysts anchored to different polystyrene-based supports has been prepared and applied in an asymmetric [2,3]-Wittig rearrangement reaction of cyclohexanone derivatives. Among them, primary amino acid-derived (aminomethylated)polystyrene-supported catalysts showed excellent reactivity leading to the formation of rearranged products in good enantioselectivities of both diastereomers. Reusability issues connected to the deactivation of the catalyst were proved to be dependent on the end-capping strategy chosen for the blocking of the unreacted active sites of the resin. This issue of end-capping has not previously been in focus. Using bulkier pivaloyl end-capping moiety, we were able to recycle the catalyst in six consecutive cycles with only marginal deceleration of the reaction. Moreover, the epimerization of the product that occurred while conducting a rearrangement reaction in the presence of a homogeneous catalyst was almost fully eliminated by switching the catalytic system to heterogeneous.

One-step assembly of a MacMillan catalyst-based phenolic-type polymer

We report herein a "bottom-up" approach for the one-step assembly of a MacMillan catalyst-based phenolic-type polymer (Mac-CP). The resulting self-supported polymeric organocatalyst possesses homogeneously distributed and highly concentrated catalytic sites. Furthermore, Mac-CP is soluble in CH₃CN but insoluble in hexane. This unique property can be used to employ the polymer as an efficient catalyst in homogeneous organocatalysis and heterogeneous recycling. As a result, Mac-CP possesses comparable catalytic activity and enantioselectivity to its homogeneous counterpart in the asymmetric Diels-Alder reaction (95% yield, 93% enantiomeric excess (ee) for endo and 92% ee for exo).

Polymeric Networks Containing Amine Derivatives as Organocatalysts for Knoevenagel Reaction within Continuously Driven Microfluidic Reactors

The Knoevenagel reaction is a classic reaction in organic chemistry for the formation of C-C bonds. In this study, various catalytic monomers for Knoevenagel reactions were synthesized and polymerized via photolithography to form polymeric gel dots with a composition of 90% catalyst, 9% gelling agent and 1% crosslinker. Furthermore, these gel dots were inserted into a microfluidic reactor (MFR) and the conversion of the reaction using gel dots as catalysts in the MFR for 8 h at room temperature was studied. The gel dots containing primary amines showed a better conversion of about 83–90% with aliphatic aldehyde and 86–100% with aromatic aldehyde, compared to the tertiary amines (52–59% with aliphatic aldehyde and 77–93% with aromatic aldehydes) which resembles the reactivity of the amines. Moreover, the addition of polar solvent (water) in the reaction mixture and the swelling properties of the gel dots by altering the polymer backbone showed a significant enhancement in the conversion of the reaction, due to the increased accessibility of the catalytic sites in the polymeric network. These results suggested the primary-amine-based catalysts facilitate better conversion compared to tertiary amines and the reaction solvent had a significant influence on organocatalysis to improve the efficiency of MFR.

Organocatalytic Polymers from Affordable and Readily Available Building Blocks for the Cycloaddition of CO2 to Epoxides

The catalytic cycloaddition of CO₂ to epoxides to afford cyclic carbonates as useful monomers, intermediates, solvents, and additives is a continuously growing field of investigation as a way to carry out the atom-economic conversion of CO₂ to value-added products. Metal-free organocatalytic compounds are attractive systems among various catalysts for such transformations because they are inexpensive, nontoxic, and readily available. Herein, we highlight and discuss key advances in the development of polymer-based organocatalytic materials that match these requirements of affordability and availability by considering their synthetic routes, the monomers, and the supports employed. The discussion is organized according to the number (monofunctional versus bifunctional materials) and type of catalytically active moieties, including both halide-based and halide-free systems. Two general synthetic approaches are identified based on the postsynthetic functionalization of polymeric supports or the copolymerization of monomers bearing catalytically active moieties. After a review of the material syntheses and catalytic activities, the chemical and structural features affecting catalytic performance are discussed. Based on such analysis, some strategies for the future design of affordable and readily available polymer-based organocatalysts with enhanced catalytic activity under mild conditions are considered.

Studies of Catalyst-Controlled Regioselective Acetalization and Its Application to Single-Pot Synthesis of Differentially Protected Saccharides

This article describes studies on the regioselective acetal protection of monosaccharide-based diols using chiral phosphoric acids (CPAs) and their immobilized polymeric variants, (R)-Ad-TRIP-PS and (S)-SPINOL-PS, as the catalysts. These catalyst-controlled regioselective acetalizations were found to proceed with high regioselectivities (up to >25:1 rr) on various d-glucose-, d-galactose-, d-mannose-, and l-fucose-derived 1,2-diols and could be carried out in a regiodivergent fashion depending on the choice of chiral catalyst. The polymeric catalysts were conveniently recycled and reused multiple times for gram-scale functionalizations with catalytic loadings as low as 0.1 mol %, and their performance was often found to be superior to the performance of their monomeric variants. These regioselective CPA-catalyzed acetalizations were successfully combined with common hydroxyl group functionalizations as single-pot telescoped procedures to produce 32 regioisomerically pure differentially protected mono- and disaccharide derivatives. To further demonstrate the utility of the polymeric catalysts, the same batch of (R)-Ad-TRIP-PS catalyst was recycled and reused to accomplish single-pot gram-scale syntheses of 6 differentially protected d-glucose derivatives. The subsequent exploration of the reaction mechanism using NMR studies of deuterated and nondeuterated substrates revealed that low-temperature acetalizations happen via a syn-addition mechanism and that the reaction regioselectivity exhibits strong dependence on the temperature. The computational studies indicate a complex temperature-dependent interplay of two reaction mechanisms, one involving an anomeric phosphate intermediate and another via concerted asynchronous formation of an acetal, that results in syn-addition products. The computational models also explain the steric factors responsible for the observed C2 selectivities and are consistent with experimentally observed selectivity trends.

Recyclable fluorous cinchona organocatalysts for asymmetric synthesis of biologically interesting compounds

Organocatalysis has unique modes of activation, mild reaction conditions, and good catalyst structural amenability. The integration of green techniques such as catalyst recovery and one-pot reactions makes organocatalysis more efficient and attractive. Presented in this article are the recyclable cinchona alkaloid-catalyzed reactions including fluorination and Michael addition-initiated cascade reactions in asymmetric synthesis of functionalized compounds of biological interest.

SuFEx-Click Approach for the Synthesis of Soluble Polymer-Bound MacMillan Catalysts for the Asymmetric Diels–Alder Reaction

Novel polymeric MacMillan catalysts were prepared from modified chiral imidazolidin-4-one monomers via sulfur(VI) fluoride exchange chemistry. The resulting polysulfates containing chiral imidazolidin-4-one units could be employed as polymeric organocatalysts for the asymmetric Diels–Alder reaction. With the use of these polysulfate catalysts, sufficient catalytic activity and enantioselectivity were obtained, which were similar to those obtained by monomeric catalysts in a homogeneous catalytic reaction. In addition, the polysulfate catalysts could be recovered and reused five times without a considerable loss of activity and selectivity.

Horeau amplification in the sequential acylative kinetic resolution of (±)-1,2-diols and (±)-1,3-diols in flow

The sequential acylative kinetic resolution (KR) of C2-symmetric (±)-1,2-syn and (±)-1,3-anti-diols using a packed bed microreactor loaded with the polystyrene-supported isothiourea, HyperBTM, is demonstrated in flow. The sequential KRs of C2-symmetric (±)-1,2-syn and (±)-1,3-anti-diols exploits Horeau amplification, with each composed of two successive KR processes, with each substrate class significantly differing in the relative rate constants for each KR process. Optimisation of the continuous flow set-up for both C2-symmetric (±)-1,2-syn and (±)-1,3-anti-diol substrate classes allowed isolation of reaction products in both high enantiopurity and yield. In addition to the successful KR of C2-symmetric (±)-1,2-syn and (±)-1,3-anti-diols, the application of this process to the more conceptually-complex scenario involving the sequential KR of C1-symmetric (±)-1,3-anti-diols was demonstrated, which involves eight independent rate constants.

Micellar Organocatalysis Using Smart Polymer Supports: Influence of Thermoresponsive Self-Assembly on Catalytic Activity

Micellar catalysts with a switchable core are attractive materials in organic synthesis. However, little is known about the role of the shell forming block on the performance of the catalyst. Thermoresponsive block copolymers based on poly(N-isopropylacrylamide-co-vinyl-4,4-dimethylazlactone) attached to different permanently hydrophilic blocks, namely poly(ethylene glycol), poly(N,N-dimethylacrylamide), and poly(2,3-dihydroxypropyl acrylate), were successfully synthesized via reversible addition/fragmentation chain transfer radical polymerization (RAFT). Post-polymerization attachment of an amino-functionalized L-prolineamide using the azlactone ring-opening reaction afforded functionalized thermoresponsive block copolymers. Temperature-induced aggregation of the functionalized block copolymers was studied using dynamic light scattering. It was shown that the chemical structure of the permanently hydrophilic block significantly affected the size of the polymer self-assemblies. The functionalized block copolymers were subjected to an aldol reaction between p-nitrobenzaldehyde and cyclohexanone in water. Upon temperature-induced aggregation, an increase in conversion was observed. The enantioselectivity of the polymer-bound organocatalyst improved with an increasing hydrophilic/hydrophobic interface as a result of the different stability of the polymer aggregates.

Recent Advances in the Synthesis and Application of Polymer Compartments for Catalysis

Catalysis is one of the most important processes in nature, science, and technology, that enables the energy efficient synthesis of essential organic compounds, pharmaceutically active substances, and molecular energy sources. In nature, catalytic reactions typically occur in aqueous environments involving multiple catalytic sites. To prevent the deactivation of catalysts in water or avoid unwanted cross-reactions, catalysts are often site-isolated in nanopockets or separately stored in compartments. These concepts have inspired the design of a range of synthetic nanoreactors that allow otherwise unfeasible catalytic reactions in aqueous environments. Since the field of nanoreactors is evolving rapidly, we here summarize-from a personal perspective-prominent and recent examples for polymer nanoreactors with emphasis on their synthesis and their ability to catalyze reactions in dispersion. Examples comprise the incorporation of catalytic sites into hydrophobic nanodomains of single chain polymer nanoparticles, molecular polymer nanoparticles, and block copolymer micelles and vesicles. We focus on catalytic reactions mediated by transition metal and organocatalysts, and the separate storage of multiple catalysts for one-pot cascade reactions. Efforts devoted to the field of nanoreactors are relevant for catalytic chemistry and nanotechnology, as well as the synthesis of pharmaceutical and natural compounds. Optimized nanoreactors will aid in the development of more potent catalytic systems for green and fast reaction sequences contributing to sustainable chemistry by reducing waste of solvents, reagents, and energy.

Isothiourea-Catalyzed Acylative Kinetic Resolution of Tertiary α-Hydroxy Esters

A highly enantioselective isothiourea-catalyzed acylative kinetic resolution (KR) of acyclic tertiary alcohols has been developed. Selectivity factors of up to 200 were achieved for the KR of tertiary alcohols bearing an adjacent ester substituent, with both reaction conversion and enantioselectivity found to be sensitive to the steric and electronic environment at the stereogenic tertiary carbinol centre. For more sterically congested alcohols, the use of a recently-developed isoselenourea catalyst was optimal, with equivalent enantioselectivity but higher conversion achieved in comparison to the isothiourea HyperBTM. Diastereomeric acylation transition state models are proposed to rationalize the origins of enantiodiscrimination in this process. This KR procedure was also translated to a continuous-flow process using a polymer-supported variant of the catalyst.

Green Asymmetric Organocatalysis

Asymmetric organocatalysis is becoming one of the main tools for the synthesis of chiral compounds that are needed as medicines, crop protection agents, and other bioactive molecules. It can be effectively combined with various green chemistry methodologies. Intensification techniques, such as ball milling, flow, high pressure, or light, bring not only higher yields, faster reactions, and easier product isolation, but also new reactivities. More sustainable reaction media, such as ionic liquids, deep eutectic solvents, green solvent alternatives, and water, also considerably enhance the sustainability profile of many organocatalytic reactions.

Ugi reaction-derived prolyl peptide catalysts grafted on the renewable polymer polyfurfuryl alcohol for applications in heterogeneous enamine catalysis

The multicomponent synthesis of prolyl pseudo-peptide catalysts using the Ugi reaction with furfurylamines or isocyanides is described. The incorporation of such a polymerizable furan handle enabled the subsequent polymerization of the peptide catalyst with furfuryl alcohol, thus rendering polyfurfuryl alcohol-supported catalysts for applications in heterogeneous enamine catalysis. The utilization of the polymer-supported catalysts in both batch and continuous-flow organocatalytic procedures proved moderate catalytic efficacy and enantioselectivity, but excellent diastereoselectivity in the asymmetric Michael addition of n-butanal to β-nitrostyrene that was used as a model reaction. This work supports the potential of multicomponent reactions towards the assembly of catalysts and their simultaneous functionalization for immobilization.

Assessment of Chitosan Based Catalyst and their Mode of Action

Introduction:

The popularity of chitosan is increasing among the researchers due to its environment friendly nature, high activity and easy approachability. Chitosan based catalysts are not only the most active and selective in catalytic reaction, but their “green” accessibility also makes them promising in organic catalysis. Chitosan is commonly extracted from chitin by alkaline deacetylation and it is the second abundant biopolymer in nature after cellulose. Chitosan based catalysts are advantageous by means of non-metallic activation as it involves small organic molecules. The robustness, nontoxicity, the lack of metal leaching possibility, inertness towards moisture and oxygen, easy handling and storage are the main advantages of organocatalysts. Traditional drawbacks associated with the metal-based heterogeneous catalysts, like longer reaction times during any synthesis, metal-leaching after every reaction and structural instability of the catalyst for prolonged recycling experiments are also very negligible for chitosan based catalysts. Besides, these catalysts can contribute more in catalysis due to their reusability and these special features increase their demand as the functionalized and profitable catalysts.

Objective:

The thorough description about the preparation of organocatalysts from chitosan and their uniqueness and novel activities in various famous reactions includes as the main aim of this review. Reusable and recycle nature of chitosan based organocatalysts gain the advantages over traditional and conventional catalyst which is further discussed over here.

Methods and Discussions:

In this article only those reactions are discussed where chitosan has been used both as support in heterogeneous catalysts or used as a catalyst itself without any co-catalyst for some reactions. Owing to its high biodegradability, nontoxicity, and antimicrobial properties, chitosan is widely-used as a green and sustainable polymeric catalyst in vast number of the reactions. Most of the preparations of catalyst have been achieved by exploring the complexation properties of chitosan with metal ions in heterogeneous molecular catalysis. Organocatalysis with chitosan is primarily discussed for carbon-carbon bond-forming reactions, carbon dioxide fixation through cyclo- addition reaction, condensation reaction and fine chemical synthesis reactions. Furthermore, its application as an enantioselective catalyst is also considered here for the chiral, helical organization of the chitosan skeleton. Moreover, another advantage of this polymeric catalyst is its easy recovery and reusability for several times under solvent-free conditions which is also explored in the current article.

Conclusion:

Important organocatalyzed reactions with either native chitosan or functionalized chitosan as catalysts have attracted great attention in the recent past. Also, chitosan has been widely used as a very promising support for the immobilization of catalytic metals for many reactions. In this review, various reactions have been discussed which show the potentiality of chitosan as catalyst or catalyst support.

Flavinium and Alkali-Metal Assembly on Sulfated Chitin: A Heterogeneous Supramolecular Catalyst for H2 O2 -Mediated Oxidation

Heterogeneous multiple-catalyst assemblies were developed in which the flavinium cation and Na or Li cations were easily immobilized on a chitin-derived anionic polymeric scaffold through noncovalent ionic interactions. The supramolecular flavinium catalysts were successfully employed in the environmentally friendly heterogeneous Baeyer-Villiger oxidation and sulfoxidation by H₂ O₂ . Owing to the cooperative catalytic effect of flavinium, alkali metal, and sulfated chitin, the supramolecular flavinium assembly showed higher catalytic activity for the Baeyer-Villiger oxidation of cyclic ketones than the corresponding homogeneous flavinium catalyst. Because the ionic assembly was stable under the reaction conditions, the catalyst could be readily recovered by simple filtration and reused.

Pyrrolidine-based chiral porous polymers for heterogeneous organocatalysis in water

The “bottom-up” reticulation of chiral pyrrolidine into POPs for heterogeneous organocatalysis in pure water.

Diastereo- and Enantioselective Syntheses of Trisubstituted Benzopyrans by Cascade Reactions Catalyzed by Monomeric and Polymeric Recoverable Bifunctional Thioureas and Squaramides

4-Vinylphenyl-substituted squaramides have been tested as organocatalysts for the diastereo- and enantioselective synthesis of trisubstituted benzopyrans via an oxa-Michael intramolecular nitro-Michael cascade reaction. Both the enantio- and diastereoselection were good to moderate, depending on the nature of the chiral scaffold in the catalyst. The diastereoselection is better for the most active catalyst because the final products epimerize at C-3 along the time. Supported squaramide sq-9 prepared by copolymerization of sq-4 with styrene and divinylbenzene is also effective in promoting the cascade reaction, and it is recoverable and reusable for five cycles maintaining the activity.

Desymmetrisation of meso-diones promoted by a highly recyclable polymer-supported chiral phosphoric acid catalyst

A polystyrene-supported BINOL-derived chiral phosphoric acid has been applied to the desymmetrisation of meso-diones to produce enantioenriched cyclohexenones. The catalytic resin has proven highly active and robust, giving rise to Hajos–Parrish or Wieland–Miescher type products in good yields and enantioselectivities, while allowing for extended recycling.

A polystyrene-supported, recyclable, BINOL-derived chiral phosphoric acid has been applied to the desymmetrization of meso-diones to produce enantioenriched cyclohexenones.