Efficient Metal-Free Organic Sensitizers Containing Tetraphenylethylene Moieties in the Donor Part for Dye-Sensitized Solar Cells

Synthesis and Properties of BODIPY Appended Tetraphenylethylene Scaffolds as Photoactive Arrays

Tetraphenylethylene (TPE) and its derivatives exhibit excellent aggregation-induced emission (AIE) properties. The TPE unit is easily accessible, and many functional groups can be introduced in a facile manner to yield effective luminescent materials in both solution and the solid-state. It is because of this, several TPE-based compounds have been developed and applied in many areas, such as OLEDs and chemical sensors. Boron dipyrromethenes (BODIPYs) are a class of pyrrolic fluorophore of great interest with myriad application in both material science and biomedical applications. Through the combination of Pd-catalyzed cross-coupling reactions and traditional dipyrromethene chemistry, we present the syntheses of novel tetra-BODIPY-appended TPE derivatives with different distances between the TPE and BODIPY cores. The TPE-BODIPY arrays 6 and 9 show vastly differing AIE properties in THF/H2O systems, with 9 exhibiting dual-AIE, along with both conjugates being found to produce singlet oxygen (1O2). We presume the synthesized BODIPY-appended TPE scaffolds to be utilized for potential applications in the fields of light-emitting systems and theranostics.

Insight into the effects of the anchoring groups on the photovoltaic performance of unsymmetrical phthalocyanine based dye-sensitized solar cells

Push-pull zinc phthalocyanine dyes bearing hexylsulfanyl moieties as electron donors and carboxyethynyl as mono- or di-anchoring groups have been designed, synthesized and tested as sensitizers in dye-sensitized solar cells (DSSCs). The effects of the anchoring groups on the optical, electrochemical and photovoltaic properties were investigated. The incorporation of a carboxyethynyl group in GT23 has a considerable effect on preventing dye aggregation due to its relatively non-planar structure. The mono-anchoring dye bearing a phenyl carboxyethynyl group, GT5, has a higher molar extinction coefficient and sufficient charge injection into the TiO2 conduction band. Therefore, GT5 achieved at least 90% higher power conversion efficiency than the di-anchoring dyes (GT31 and GT32). Time-dependent density functional theory (PBE0/6-31G(d,p)) was also used to calculate the electronic absorption spectra, which predicted very well the measured UV-Vis with an error of up to 0.11 eV for the Q bands and 0.3 eV for the B bands. The longest charge transfer bands are obtained in the visible light region and they correspond to a transfer phthalocyanine core → substituent with a carboxyethynyl group where the absorptions of GT32 (465 nm) and GT31 (461 nm) are red-shifted compared to GT23 (429 nm) and GT5 (441 nm). The interaction energy between the phthalocyanine and a cluster of anatase-TiO2 (H4Ti40O82) was calculated using density functional theory. For all phthalocyanines, the interaction favored is monodentate and corresponds to -O(OH)Ti(TiO2), where the stronger interaction occurs for GT32 (-2.11 eV) and GT31 (-2.25 eV). This study presents the molecular combination of the anchoring groups in zinc phthalocyanine sensitizers, which is one of the effective strategies for improving the performance of DSSCs.

Tunable Aggregation-Induced Emission Nanoparticles by Varying Isolation Groups in Perylene Diimide Derivatives and Application in Three-Photon Fluorescence Bioimaging

The development of fluorogens with deep-red emission is one of the hottest topics of investigation in the field of bio/chemosensors and bioimaging. Herein, the tunable fluorescence of perylene diimide (PDI) derivatives was achieved by the incorporation of varied isolation groups linked on the PDI core. With the enlarged sizes of isolation groups, the conversion from aggregation caused quenching to aggregation-induced emission was obtained in their fluorescence variations from solutions to nanoparticles, as the result of the efficient inhibition of π-π stacking by the larger isolation groups. Accordingly, DCzPDI bearing 1,3-di(9H-carbazol-9-yl)benzene as the biggest isolation group exhibited the bright deep-red emission in the aggregated state with a quantum yield of 12.3%. Combined with the three-photon excited fluorescence microscopy (3PFM) technology, through-skull 3PFM imaging of mouse cerebral vasculature can be realized by DCzPDI nanoparticles with good biocompatibility, and the penetration depth can be as deep as 450 μm.

A self-supporting bimetallic Au@Pt core-shell nanoparticle electrocatalyst for the synergistic enhancement of methanol oxidation

The morphology of Pt−Au bimetal nanostructures plays an important role in enhancing the catalytic capability, catalytic stability and utilization efficiency of the platinum. We designed and successfully prepared Au@Pt nanoparticles (NPs) through an economical, surfactant-free and efficient method of seed-mediated growth. The Au@Pt NPs displayed electrochemical performances superior to those of commercial Pt/C catalysts because their agglomeration was prevented and exhibited better long-term stability with respect to methanol oxidation in acidic media by efficiently removing intermediates. Among the obtained Au@Pt NPs, Au₉₀@Pt₁₀ NPs exhibited the most significantly enhanced catalytic performance for the methanol oxidation reaction (MOR). Their mass and electrochemically active surface area (ECSA)-normalized current densities are approximately 3.9 and 4.6 times higher than those of commercial Pt/C catalysts, respectively. The oxidation current densities of the Au₉₀@Pt₁₀ NPs are approximately 1.8 times higher than those of commercial Pt/C catalysts after 4000 s of continuous measurement because the small Pt NPs grown on the surface of the Au₉₀@Pt₁₀ NPs were effectively stabilized by the Au metal support. This approach may be a facile method for the synthesis of self-supported bimetallic nanostructures, which is of great significance for the development of high performance electrocatalysts and sensors.

Applications of Fluorogens with Rotor Structures in Solar Cells

Solar cells are devices that convert light energy into electricity. To drive greater adoption of solar cell technologies, higher cell efficiencies and reductions in manufacturing cost are necessary. Fluorogens containing rotor structures may be helpful in addressing some of these challenges due to their unique twisted structures and photophysics. In this review, we discuss the applications of rotor-containing molecules as dyes for luminescent down-shifting layers and luminescent solar concentrators, where their aggregation-induced emission properties and large Stokes shifts are highly desirable. We also discuss the applications of molecules containing rotors in third-generation solar cell technologies, namely dye-sensitized solar cells and organic photovoltaics, where the twisted 3-dimensional rotor structures are used primarily for aggregation control. Finally, we discuss perspectives on the future role of molecules containing rotor structures in solar cell technologies.

Artificial evolution of coumarin dyes for dye sensitized solar cells

The design and discovery of novel molecular structures with optimal properties has been an ongoing effort for materials scientists. This field has in general been dominated by experiment driven trial-and-error approaches that are often expensive and time-consuming. Here, we investigate if a de novo computational design methodology can be applied to the design of coumarin-based dye sensitizers with improved properties for use in Grätzel solar cells. To address the issue of synthetic accessibility of the designed compounds, a fragment-based assembly is employed, wherein the combination of chemical motifs (derived from the existing databases of structures) is carried out with respect to user-adaptable set of rules. Rather than using computationally intensive density functional theory (DFT)/ab initio methods to screen candidate dyes, we employ quantitative structure-property relationship (QSPR) models (calibrated from empirical data) for rapid estimation of the property of interest, which in this case is the product of short circuit current (Jsc) and open circuit voltage (Voc). Since QSPR models have limited validity, pre-determined applicability domain criteria are used to prevent unacceptable extrapolation. DFT analysis of the top-ranked structures provides supporting evidence of their potential for dye sensitized solar cell applications.

New anthracene-based organic dyes: the flexible position of the anthracene moiety bearing isolation groups in the conjugated bridge and the adjustable cell performance

A series of 9,10-diarylsubstituted anthracene (An)-bridged with different sequences were developed to explore the suitable position of isolation groups.

Modulating triphenylamine-based organic dyes for their potential application in dye-sensitized solar cells: a first principle theoretical study

By using computational methodologies based on time dependent density functional theory (TDDFT) we study the opto-electronic properties of three types of triphenylamine (TPA)-based dyes, namely TPA-TBT-1, TPA-DBT-1, and TPA-BT-1, and these are proposed as potential candidates for photovoltaic applications. Energy band modulation has been performed by functionalizing these dyes with different electron donating and electron withdrawing groups. Photoelectron spectra and photovoltaic properties of the dyes have been investigated by a combination of DFT and TDDFT approaches. Based on the optimized molecular geometry, relative position of the frontier energy levels, and the absorption maximum of the dyes we propose some dyes offering good photovoltaic performance. At the same time, these results provide a direction for optimizing the composition of dye-metal surface nanodevices for fabricating dye-sensitized solar cells (DSSCs).

Attempt to improve the performance of pyrrole-containing dyes in dye sensitized solar cells by adjusting isolation groups

Four new pyrrole-based organic sensitizers with different isolation groups were conveniently synthesized and applied to dye sensitized solar cells (DSCs). The introduction of isolation group in the side chain could both suppress the formation of dye aggregates and electron recombination. Especially, when two pieces of D-π-A chromophore moieties shared one isolation group to construct the "H" type dye, the performance was further improved. Consequently, in the corresponding solar cell of LI-57, a short-circuit photocurrent density (Jsc) was tested to be 13.85 mA cm(-2), while 0.72 V for the open-circuit photovoltage (Voc), 0.64 for the fill factor (FF), and 6.43% for the overall conversion efficiency (η), exceeding its analogue LI-55 (5.94%) with the same isolation group. The results demonstrated that both the size (bulk and shape) and the linkage mode between the D-π-A chromophores and the isolation groups, could affect the performance of sensitizers in DSCs in a large degree, providing a new approach to optimize the chemical structure of dyes to achieve high conversion efficiencies.

Arylamine organic dyes for dye-sensitized solar cells

Arylamine organic dyes with donor (D), π-bridge (π) and acceptor (A) moieties for dye-sensitized solar cells (DSCs) have received great attention in the last decade because of their high molar absorption coefficient, low cost and structural variety. In the early stages, the efficiency of DSCs with arylamine organic dyes with D-π-A character was far behind that of DSCs with ruthenium(II) complexes partly due to the lack of information about the relationship between the chemical structures and the photovoltaic performance. However, exciting progress has been recently made, and power conversion efficiencies over 10% were obtained for DSCs with arylamine organic dyes. It is thus that the recent research and development in the field of arylamine organic dyes employing an iodide/triiodide redox couple or polypyridyl cobalt redox shuttles as the electrolytes for either DSCs or solid-state DSCs has been summarized. The cell performance of the arylamine organic dyes are compared, providing a comprehensive overview of arylamine organic dyes, demonstrating the advantages/disadvantages of each class, and pointing out the field that needs to reinforce the research direction in the further application of DSCs.