Preparation and Catalytic Activity of BINOL-Derived Silanediols

Synthesis of unsymmetrical dialkoxydiarylsilanes and diarylsilanediols from tetraalkoxysilane having a dioxasilepane unit

The tetraalkoxysilane carrying a stable seven-membered dioxasilepane moiety and two trifluoroethoxy groups undergoes reliable iterative substitution of the two trifluoroethoxy groups by sequential treatment with different aryl Grignard reagents while keeping the seven-membered structure intact. The process results in the synthesis of unsymmetrical dialkoxydiarylsilanes and eventually diarylsilanediols after proper hydrolysis.

On the fate of protonated chloroformates in the gas phase: a competition between forming HCl and chloroformic acid

Chloroformates are prevalent in the atmosphere due to their utilization as fuel additives and industrial solvents. These species may undergo interactions with atmospheric water resulting in protonated chloroformates. This study delves into the gas-phase dissociation of these protonated species. Tandem mass spectrometry was employed to scrutinize the unimolecular dissociation of protonated methyl (1), ethyl (2), neopentyl (3), and phenyl chloroformate (4). Notably, 1 and 4 exhibited HCl loss, yielding CH3OCO+ and C6H5OCO+, respectively, with 1 additionally generating neutral methanol and ClCO+. 4 additionally loses CO and CO2. In contrast, 2 and 3 each only exhibit a single fragmentation channel, with 2 losing C2H4 to generate protonated chloroformic acid and 3 generating protonated 2-methylbutene by losing neutral chloroformic acid. Density functional theory at the B3LYP/6-311+G(d,p) level of theory was employed to explore minimum energy reaction pathways for each ion, and CBS-QB3 single-point energy calculations were added to provide reliable energetics. The Rice-Ramsperger-Kassel-Marcus (RRKM) calculations of the rate constants for selected competing processes were carried out to link theory and experiment. One common unimolecular process observed was the 1,3-H shift of the proton from the carbonyl oxygen to the ester oxygen before dissociation.

Enantioselective dearomatization reactions of heteroarenes by anion-binding organocatalysis

Catalytic asymmetric dearomatization of heteroaromatic compounds has received considerable attention in the last few years, since it allows for a fast expansion of the chemical space by converting relatively simple, flat molecules into complex, three dimensional structures with added value. Among different approaches, remarkable progress has been recently achieved by the development of organocatalytic dearomatization methods. In particular, the anion-binding catalysis technology has emerged as a potent alternative to metal catalysis, which together with the design of novel, tunable anion-receptor motifs, has provided new entries for the enantioselective dearomatization of heteroarenes through a chiral contact ion pair formation by activation of the electrophilic reaction partner. In this feature, we provide an overview of the different methodologies and advances in anion-binding catalyzed dearomatization reactions of different heteroarenes.

BINOL-Containing Chiral Porous Polymers as Platforms for Enantiorecognition

The enantioselective discrimination of racemic compounds can be achieved through the design and preparation of a new family of chiral conjugated BINOL-porous polymers (CBPPs) from enantiopure (R)- or (S)-BINOL derivatives and 1,3,5-tris(4-phenylboronic acid)benzene or 1,3,5-tris(4-ethynylphenyl)benzene, 1,3,5-triethynyl-2,4,6-trifluorobenzene, and tetra(4-ethynylphenyl)methane as comonomers following Suzuki-Miyaura and Sonogashira-Hagihara carbon-carbon coupling approaches. The obtained CBPPs show high thermal stability, a good specific surface area, and a robust framework and can be applied successfully in the fluorescence recognition of enantiomers of terpenes (limonene and α-pinene) and 1-phenylethylamine. Fluorescence titration of CBPPs-OH in acetonitrile shows that all Sonogashira hosts exhibit a preference for the (R)-enantiomer over the (S)-enantiomer of 1-phenylethylamine, the selectivity being much higher than that of the corresponding BINOL-based soluble system used as a reference. However, the Suzuki host reveals a preference toward (S)-phenylethylamine. Regarding the sensing of terpenes, only Sonogashira hosts show enantiodifferentiation with an almost total preference for the (S)-enantiomer of limonene and α-pinene. Based on the computational simulations and the experimental data, with 1-phenylethylamine as the analyte, chiral recognition is due to the distinctive binding affinities resulting from N···H-O hydrogen bonds and the π-π interaction between the host and the guest. However, for limonene, the geometry of the adsorption complex is mostly governed by the interaction between the hydroxyl group of the BINOL unit and the C═C bond of the iso-propenyl fragment. The synthetic strategy used to prepare CBPPs opens many possibilities to place chiral centers such as BINOL in porous polymers for different chiral applications such as enantiomer recognition.

Activation Modes in Asymmetric Anion-Binding Catalysis

Over the past two decades, enantioselective anion-binding catalysis has emerged as a powerful strategy for the induction of chirality in organic transformations. The stereoselectivity is achieved in a range of different reactions by using non-covalent interactions between a chiral catalyst and an ionic substrate or intermediate, and subsequent formation of a chiral contact ion-pair upon anion-binding. This strategy offers vast possibilities in catalysis and the constant development of new reactions has led to various substrate activation approaches. This review provides an overview on the different activation modes in asymmetric anion-binding catalysis by looking at representative examples and recent advances made in this field.

Anion recognition by silanetriol in acetonitrile

Anion recognition ability and organocatalytic activity of a silanetriol are firstly presented by comparing with those of a series of silanol derivatives.

Copolymers incorporated with β-substituted acrylate synthesized by organo-catalyzed group-transfer polymerization

Various copolymers incorporated with β-substituted acrylates, such as alkyl crotonates (e.g., methyl crotonate (MC), ethyl crotonate (EC), isopropyl crotonate (iPC), and n-butyl crotonate (nBC)) and methyl cinnamate (MCin), were synthesized by group-transfer polymerization (GTP) using a silicon-based Lewis acid catalyst. In addition to β-substituted acrylates, α-substituted acrylates (e.g., methyl methacrylate (MMA) and n-butyl methacrylate (nBMA)) were examined as comonomers. Proton nuclear magnetic resonance (1H NMR) spectroscopy and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) characterizations of the obtained copolymers revealed that each monomer component was incorporated sufficiently. The thermal stabilities of the resulting copolymers were investigated by dynamic mechanical analysis (DMA), indicating that the glass-transition temperature (Tg) of the copolymers can be widely varied over a relatively high-temperature range by selecting the optimal comonomer. More specifically, the Tg values of poly(MC-random-EC) (MC/EC molar ratio = 50/50), poly(MC-random-nBC) (MC/nBC molar ratio = 50/50), poly(MC-random-MCin) (MC/MCin molar ratio = 54/46), and poly(nBC-random-MCin) (nBC/MCin molar ratio = 56/44) were 173, 130, 216, and 167 °C, respectively.

Confinement-Driven Enantioselectivity in 3D Porous Chiral Covalent Organic Frameworks

3D covalent organic frameworks (COFs) with well-defined porous channels are shown to be capable of inducing chiral molecular catalysts from non-enantioselective to highly enantioselective in catalyzing organic transformations. By condensations of a tetrahedral tetraamine and two linear dialdehydes derived from enantiopure 1,1'-binaphthol (BINOL), two chiral 3D COFs with a 9-fold or 11-fold interpenetrated diamondoid framework are prepared. Enhanced Brønsted acidity was observed for the chiral BINOL units that are uniformly distributed within the tubular channels compared to the non-immobilized acids. This facilitates the Brønsted acid catalysis of cyclocondensation of aldehydes and anthranilamides to produce 2,3-dihydroquinazolinones. DFT calculations show the COF catalyst provides preferential secondary interactions between the substrate and framework to induce enantioselectivities that are not achievable in homogeneous systems.

Enantioselective S-H Insertion Reactions of α-Carbonyl Sulfoxonium Ylides

The first example of enantioselective S-H insertion reactions of sulfoxonium ylides is reported. Under the influence of thiourea catalysis, excellent levels of enantiocontrol (up to 95 % ee) and yields (up to 97 %) are achieved for 31 examples in S-H insertion reactions of aryl thiols and α-carbonyl sulfoxonium ylides.

Kinetic modeling study of the group-transfer polymerization of alkyl crotonates using a silicon Lewis acid catalyst

Kinetic modeling is effective in the development of efficient and manageable polymerization systems.

Electrostatically Enhanced Phosphoric Acids and Their Applications in Asymmetric Friedel-Crafts Alkylations

A series of electrostatically enhanced phosphoric acid catalysts were synthesized and studied. These compounds possess two positively charged N-octylpyridinium or triarylphosphonium ion centers at the 3,3'-positions of the (R)-BINOL backbone to enhance reactivity and provide needed steric bulk for enantioselective transformations. Catalytic activities for Friedel-Crafts alkylations of indoles with trans-β-nitrostyrenes were studied. Both types of catalysts accelerate reaction conversions relative to noncharged analogues, and good enantioselectivities up to 90% ee are observed with the phosphonium-ion-tagged phosphoric acids. This transformation also can be scaled up to synthetically useful amounts, affording >250 mg of product without losing any reactivity or selectivity.

Anion coordination chemistry using O-H groups

This review covers significant advances in the use of O-H groups in anion coordination chemistry. The review focuses on the use of these groups in synthetic anion receptors, as well as more recent developments in transport, self-assembly and catalysis.

Silanediol versus chlorosilanol: hydrolyses and hydrogen-bonding catalyses with fenchole-based silanes

Biphenyl-2,2'-bisfenchyloxydichlorosilane (7, BIFOXSiCl2) is synthesized and employed as precursor for the new silanols biphenyl-2,2'-bisfenchyloxychlorosilanol (8, BIFOXSiCl(OH)) and biphenyl-2,2'-bisfenchyloxysilanediol (9, BIFOXSi(OH)2). BIFOXSiCl2 (7) shows a remarkable stability against hydrolysis, yielding silanediol 9 under enforced conditions. A kinetic study for the hydrolysis of dichlorosilane 7 shows a 263 times slower reaction compared to reference bis-(2,4,6-tri-tert-butylphenoxy)dichlorosilane (14), known for its low hydrolytic reactivity. Computational analyses explain the slow hydrolyses of BIFOXSiCl2 (7) to BIFOXSiCl(OH) (8, E a = 32.6 kcal mol-1) and BIFOXSiCl(OH) (8) to BIFOXSi(OH)2 (9, E a = 31.4 kcal mol-1) with high activation barriers, enforced by endo fenchone units. Crystal structure analyses of silanediol 9 with acetone show shorter hydrogen bonds between the Si-OH groups and the oxygen of the bound acetone (OH···O 1.88(3)-2.05(2) Å) than with chlorosilanol 8 (OH···2.16(0) Å). Due to its two hydroxy units, the silanediol 9 shows higher catalytic activity as hydrogen bond donor than chlorosilanol 8, e.g., C-C coupling N-acyl Mannich reaction of silyl ketene acetals 11 with N-acylisoquinolinium ions (up to 85% yield and 12% ee), reaction of 1-chloroisochroman (18) and silyl ketene acetals 11 (up to 85% yield and 5% ee), reaction of chromen-4-one (20) and silyl ketene acetals 11 (up to 98% yield and 4% ee).

Chiral Diol-Based Organocatalysts in Enantioselective Reactions

Organocatalysis has emerged as a powerful synthetic tool in organic chemistry in the last few decades. Among various classes of organocatalysis, chiral diol-based scaffolds, such as BINOLs, VANOLs, and tartaric acid derivatives, have been widely used to induce enantioselectivity due to the ability of the hydroxyls to coordinate with the Lewis acidic sites of reagents or substrates and create a chiral environment for the transformation. In this review, we will discuss the applications of these diol-based catalysts in different types of reactions, including the scopes of reactions and the modes of catalyst activation. In general, the axially chiral aryl diol BINOL and VANOL derivatives serve as the most competent catalyst for most examples, but examples of exclusive success using other scaffolds, herein, suggests that they should not be overlooked. Lastly, the examples, to date, are mainly from tartrate and biaryl diol catalysts, suggesting that innovation may be available from new diol scaffolds.

Enantioselective Catalyst Systems from Copper(II) Triflate and BINOL-Silanediol

Silanediol and copper catalysis are merged, for the first time, to create an enhanced Lewis acid catalyst system for enantioselective heterocycle functionalization. The promise of this silanediol and copper catalyst combination is demonstrated in the enantioselective addition of indoles to alkylidene malonates to give rise to the desirable adducts in excellent yield and high enantiomeric excess. From these studies, 1,1'-bi-2-naphthol (BINOL)-based silanediols emerge as one-of-a-kind cocatalysts. Their potential role in the reaction pathway is also discussed.

Ruthenium-Catalyzed Chemo- and Enantioselective Hydrogenation of Isoquinoline Carbocycles

A chemoselective hydrogenation of isoquinoline carbocycles was achieved by using the catalyst prepared from Ru(methallyl)₂(cod) and trans-chelate chiral ligand PhTRAP. The unique chemoselectivity achieved in this hydrogenation could be ascribed to the trans-chelation of the chiral ligand. The procedure for preparing the catalyst strongly affects the reproducibility of the carbocycle hydrogenation. Various 5-, 6-, 7-, and 8-substituted isoquinolines were selectively hydrogenated at their carbocycles to afford 5,6,7,8-tetrahydroisoquinolines as major products in high yields with moderate or good enantioselectivities. Some mechanistic studies suggested that the stereogenic center was created during the initial addition of H₂ to the aromatic ring in the hydrogenation of 5-substituted isoquinolines. In other words, the stereochemical control was accompanied by the dearomatization.

Catalysis with Pnictogen, Chalcogen, and Halogen Bonds

Halogen‐ and chalcogen‐based σ‐hole interactions have recently received increased interest in non‐covalent organocatalysis. However, the closely related pnictogen bonds have been neglected. In this study, we introduce conceptually simple, neutral, and monodentate pnictogen‐bonding catalysts. Solution and in silico binding studies, together with high catalytic activity in chloride abstraction reactions, yield compelling evidence for operational pnictogen bonds. The depth of the σ holes is easily varied with different substituents. Comparison with homologous halogen‐ and chalcogen‐bonding catalysts shows an increase in activity from main group VII to V and from row 3 to 5 in the periodic table. Pnictogen bonds from antimony thus emerged as by far the best among the elements covered, a finding that provides most intriguing perspectives for future applications in catalysis and beyond.

Hydrogen-bonding cyclodiphosphazanes: superior effects of 3,5-(CF3)2-substitution in anion-recognition and counter-ion catalysis

Syntheses, X-ray characterization and employment of new cyclodiphosph(v)azane hydrogen-bonding catalysts in experimental and computational anion recognition and the N-acyl-Mannich reaction.

Hydrogen-bonding catalysis of sulfonium salts

Although quaternary ammonium and phosphonium salts are known as important catalysts in phase-transfer catalysis, the catalytic ability of tertiary sulfonium salts has not yet been well demonstrated. Herein, we demonstrate the catalytic ability of trialkylsulfonium salts as hydrogen-bonding catalysts on the basis of the characteristic properties of the acidic α hydrogen atoms on alkylsulfonium salts.

Two-Photon Luminescence and Second-Harmonic Generation in Organic Nonlinear Surface Comprised of Self-Assembled Frustum Shaped Organic Microlasers

An ultrathin nonlinear optical (NLO) organic surface composed of numerous self-assembled frustum-shaped whispering-gallery-mode resonators displays both two-photon luminescence and second-harmonic-generation signals. A super-second-order increase of the NLO intensity with respect to pump power confirms the microlasing action and practical usefulness of the NLO organic surfaces.

Enantioselective dearomatization of isoquinolines by anion-binding catalysis en route to cyclic α-aminophosphonates

An enantioselective dearomatization of isoquinolines has been developed using chiral anion-binding catalysis. This transformation makes use of silyl phosphite as a nucleophile and generates cyclic α-aminophosphonates.

An enantioselective dearomatization of isoquinolines has been developed using chiral anion-binding catalysis. This transformation, catalyzed by a simple and easy to prepare tert-leucine-based thiourea derivative, makes use of silyl phosphite as a nucleophile and generates cyclic α-aminophosphonates. This is the first time asymmetric anion-binding catalysis has been applied to the synthesis of α-aminophosphonates.

Silanediol-Catalyzed Chromenone Functionalization

Promising levels of enantiocontrol are observed in the silanediol-catalyzed addition of silyl ketene acetals to benzopyrylium triflates. This rare example of enantioselective, intermolecular chromenone functionalization with carbonyl-containing nucleophiles has potential applications in the synthesis of bioactive chromanones and tetrahydroxanthones.

Chiral Triazoles in Anion-Binding Catalysis: New Entry to Enantioselective Reissert-Type Reactions

Easily accessible and tunable chiral triazoles have been introduced as a novel class of C-H bond-based H-donors for anion-binding organocatalysis. They have proven to be effective catalysts for the dearomatization reaction of different N-heteroarenes. Although this dearomatization approach represents a powerful strategy to build chiral heterocycles, to date only a few catalytic methods to this end exist. In this work, the organocatalyzed enantioselective Reissert-type dearomatization of isoquinoline derivatives employing a number of structurally diverse chiral triazoles as anion-binding catalysts was realized. The here presented method was employed to synthesize a number of chiral 1,2-dihydroisoquinoline substrates with an enantioselectivity up to 86:14 e.r. Moreover, a thorough study of the determining parameters affecting the activity of this type of anion- binding catalysts was carried out.

Tetraalkylammonium Salts as Hydrogen-Bonding Catalysts

Although the hydrogen-bonding ability of the α hydrogen atoms on tetraalkylammonium salts is often discussed with respect to phase-transfer catalysts, catalysis that utilizes the hydrogen-bond-donor properties of tetraalkylammonium salts remains unknown. Herein, we demonstrate hydrogen-bonding catalysis with newly designed tetraalkylammonium salt catalysts in Mannich-type reactions. The structure and the hydrogen-bonding ability of the new ammonium salts were investigated by X-ray diffraction analysis and NMR titration studies.