2-Substituted quinazolines: Partial agonistic and antagonistic ligands of the constitutive androstane receptor (CAR)

Following the discovery of 2-(3-methoxyphenyl)-3,4-dihydroquinazoline-4-one and 2-(3-methoxyphenyl)quinazoline-4-thione as potent, but non-specific activators of the human Constitutive Androstane Receptor (CAR, NR1I3), a series of quinazolinones substituted at the C2 phenyl ring was prepared to examine their ability to selectively modulate human CAR activity. Employing cellular and in vitro TR-FRET assays with wild-type CAR or its variant 3 (CAR3) ligand binding domains (LBD), several novel partial human CAR agonists and antagonists were identified. 2-(3-Methylphenyl) quinazolinone derivatives 7d and 8d acted as partial agonists with the recombinant CAR LBD, the former in nanomolar units (EC50 = 0.055 μM and 10.6 μM, respectively). Moreover, 7d did not activate PXR, and did not show any signs of cytotoxicity. On the other hand, 2-(4-bromophenyl)quinazoline-4-thione 7l possessed significant CAR antagonistic activity, although the compound displayed no agonistic or inverse agonistic activities. A compound possessing purely antagonistic effect was thus identified for the first time. These and related compounds may serve as a remedy in xenobiotic intoxication or, conversely, in suppression of undesirable hepatic CAR activation.

Construction and yield optimization of a cinnamylamine biosynthesis route in Escherichia coli

Background

With the development of metabolic engineering and synthetic biology, the biosynthesis of aromatic compounds has attracted much attention. Cinnamylamine is an aromatic compound derived from l-phenylalanine, which is used in the synthesis of biologically active molecules, including drugs, and energetic materials. Cinnamylamine has been mainly synthesized by chemical methods to date, and few reports have focused on the biosynthesis of cinnamylamine. Therefore, it is desirable to establish an efficient biosynthesis method for cinnamylamine.

Results

The ω-aminotransferase Cv-ωTA from Chromobacterium violaceum has been demonstrated to have high enzyme activity in the conversion of cinnamaldehyde to cinnamylamine. To prevent the preferable conversion of cinnamaldehyde to cinnamyl alcohol in wild-type Escherichia coli, the E. coli MG1655 strain with reduced aromatic aldehyde reduction (RARE) in which six aldehyde ketone reductase and alcohol dehydrogenase genes have been knocked out was employed. Then, the carboxylic acid reductase from Neurospora crassa (NcCAR) and phosphopantetheinyl transferase (PPTase) from E. coli were screened for a high conversion rate of cinnamic acid to cinnamaldehyde. To shift the equilibrium of the reaction toward cinnamylamine, saturation mutagenesis of Cv-ωTA at key amino acid residues was performed, and Cv-ωTA Y168G had the highest conversion rate with 88.56 mg/L cinnamylamine obtained after 4 h of fermentation. Finally, by optimizing the substrates and the supply of the cofactors, PLP and NADPH, in the fermentation, the yield of cinnamylamine in engineered E. coli reached 523.15 mg/L.

Conclusion

We achieved the first biosynthesis of cinnamylamine using cinnamic acid as the precursor in E. coli using a combinatorial metabolic engineering strategy. This study provides a reference for the biosynthesis of other amine compounds and lays a foundation for the de novo synthesis of cinnamylamine.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13068-022-02199-7.

Crystal structure and Hirshfeld surface analysis of 3-methyl-4-oxo-N-phenyl-3,4-di-hydro-quinazoline-2-carbo-thio-amide

The asymmetric unit of the title compound, C16H13N3OS, comprises two mol-ecules (A and B) with similar conformations that differ mainly in the orientation of the phenyl group relative to the rest of the mol-ecule, as expressed by the Cthio-amide-Nthio-amide-Cphen-yl-Cphen-yl torsion angle of 49.3 (3)° for mol-ecule A and of 5.4 (3)° for mol-ecule B. In the crystal, two inter-molecular N-H⋯N hydrogen bonds lead to the formation of a dimer with R 2 2(10) graph-set notation. A Hirshfeld surface analysis revealed that H⋯H inter-actions are the most important inter-molecular inter-actions, contributing 40.9% to the Hirshfeld surface.

α-Keto Acids as Triggers and Partners for the Synthesis of Quinazolinones, Quinoxalinones, Benzooxazinones, and Benzothiazoles in Water

A general and efficient method for the synthesis of quinazolinones, quinoxalinones, benzooxazinones, and benzothiazoles from the reactions of α-keto acids with 2-aminobenzamides, benzene-1,2-diamines, 2-aminophenols, and 2-aminobenzenethiols, respectively, is described. The reactions were conducted under catalyst-free conditions, using water as the sole solvent with no additive required, and successfully applied to the synthesis of sildenafil. More importantly, these reactions can be conducted on a mass scale, and the products can be easily purified through filtration and washing with ethanol (or crystallized).

Unexpected Insertion of Nitrogen into a C-C Bond: Access to 2,3-Disubstituted Quinazolinone Scaffolds

A novel, practical, highly efficient, and transition metal free nitrogen insertion reaction for the synthesis of 2,3-disubstituted quinazolinone derivatives was developed. Diverse functionalized 3-indolinone-2-carboxylates and nitrosoarenes with a wide range of substituted nitrosobenzenes, nitrosopyridines, dibenzofuranyl, or dibenzothienyl nitroso compounds worked smoothly to give 2,3-disubstituted quinazolinone derivatives in good to excellent yields (69-98%). A gram-scale reaction was achieved, and an afloqualone analogue was synthesized under the mild reaction conditions.

An efficient transition-metal-free route to quinazolin-4(3H)-ones via 2-aminobenzamides and thiols

An efficient approach to quinazolin-4(3H)-ones was developed by a one-pot intermolecular annulation reaction of o-amino benzamides and thiols.

Quinazolinone Synthesis through Base-Promoted SNAr Reaction of ortho-Fluorobenzamides with Amides Followed by Cyclization

A transition-metal-free synthesis of quinazolin-4-ones by Cs2CO3-promoted SNAr reaction of ortho-fluorobenzamides with amides followed by cyclization in dimethyl sulfoxide has been developed. The present procedure can provide efficient synthetic methods for the formation of both 2-substituted and 2,3-disubstituted quinazolin-4-one rings depending on the use of easily available starting materials and an efficient, one-pot protocol for the synthesis of the marketed drug product of methaqualone.

Copper-catalyzed tandem oxidative synthesis of quinazolinones from 2-aminobenzonitriles and benzyl alcohols

A highly efficient, one-pot Cu(OAc)₂/Cs₂CO₃-catalyzed protocol for the aerobic oxidative synthesis of quinazolinones from readily available benzyl alcohols and 2-aminobenzonitriles with molecular oxygen as the terminal oxidant has been successfully developed.

"On-Water" Synthesis of Quinazolinones and Dihydroquinazolinones Starting from o-Bromobenzonitrile

A versatile and practical “on-water” protocol was newly developed to synthesize quinazolinones using o-bromobenzonitrile as a novel starting material. Studies have found that air as well as water plays an important role in synthesis of quinazolinones. Further investigation indicated that dihydroquinazolinones can be prepared with this protocol under the protection of N₂. The protocol can be extended to other substrates and various quinazolinones and dihydroquinazolinones were obtained. o-Bromobenzamide, o-aminobenzonitrile, and o-aminobenzamide were also evaluated as starting materials, and the results further proved the versatility of this protocol, especially towards dihydroquinazolinones.

Heterogeneous Route for the One-Pot Synthesis of N-Arylamides from Aldoximes and Aryl Halides Using the CuO/Carbon Material

Metal oxide nanoparticles (NPs) stabilized by porous carbon materials (PCMs) are very promising for catalysis. In this work, monodispersed small and stable copper oxide (CuO) NPs were prepared with an average size of 10-20 nm without using any capping agent and then these NPs were encapsulated into porous carbon. The chemical and structural properties of the CuO/PCM material were characterized by powder X-ray diffraction, electron microscopy, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and nitrogen sorption. The obtained CuO/PCM nanocatalytic system has been used for the synthesis of N-arylamides from the reaction of aldoximes and aryl halides. Generally, copper(II) salt was used for the preparation of amides from aldoximes using some ligands and bases, but harsh reaction condition, stoichiometric amount of metal, and lack of recyclability limit their applications in industry. An alternative method is the use of heterogeneous catalysts. More importantly, these heterogeneous catalysts could be easily recycled and reused, showing potential application in organic synthesis.

Synthesis of Cu-catalysed quinazolinones using a Csp3–H functionalisation/cyclisation strategy

A series of 2,3-disubstituted-4(3H)-quinazolinones were synthesised via a copper-catalysed C_sp3–H functionalisation/cyclisation of 2-amino-N,N-dialkylbenzamides.

Synthesis of quinazolinones via radical cyclization of α-azidyl benzamides

Under visible light irradiation with N-bromosuccinimide, α-azidyl benzamides can be transformed into quinazolinones in high efficiency via cascade radical processes.

Iron nitrate/TEMPO-catalyzed aerobic oxidative synthesis of quinazolinones from alcohols and 2-aminobenzamides with air as the oxidant

A highly efficient, one-pot Fe(NO₃)₃/TEMPO-catalyzed protocol for aerobic oxidative synthesis of quinazolinones from easily accessible primary alcohols and 2-aminobenzamides with molecular oxygen as the terminal oxidant.

Synthesis of spiro isoindolinone-indolines and 1,2-disubstituted indoles from 2-iodobenzamide derivatives

Copper catalyzed C-terminal and N-terminal attack of 2-alkynylanilines to 2-iodobenzamides afforded isoindolinones and 1,2-disubstituted indoles, respectively.