Potentiality and Synthesis of O- and N-Heterocycles: Pd-Catalyzed Cyclocarbonylative Sonogashira Coupling as a Valuable Route to Phthalans, Isochromans, and Isoindolines

Enantioselective Synthesis of α-Quaternary Isochromanes by Oxidative Aminocatalysis and Gold Catalysis

A novel strategy that combines oxidative aminocatalysis and gold catalysis allows the preparation of chiral α-quaternary isochromanes, a motif that is prevalent in natural products and synthetic bioactive compounds. In the first step, α-branched aldehydes and propargylic alcohols are transformed into α-quaternary ethers with excellent optical purities (>90 % ee) via oxidative umpolung with DDQ and an amino acid-derived primary amine catalyst. Subsequent gold(I)-catalyzed intramolecular hydroarylation affords the isochromane products with retention of the quaternary stereocenter. A second approach explores the use of allylic alcohols as reaction partners for the oxidative coupling to furnish α-quaternary ethers with generally lower enantiopurities. Stereoretentive cyclization to isochromane products is achieved via intramolecular Friedel-Crafts type alkylation with allylic acetates as a reactive handle. A number of synthetic elaborations and a biological study on these α-quaternary isochromanes highlight the potential applicability of the presented method.

Palladium Iodide Catalyzed Multicomponent Carbonylative Synthesis of 2-(4-Acylfuran-2-yl)acetamides

2-Propargyl-1,3-dicarbonyl compounds have been carbonylated under oxidative conditions and with the catalysis of the PdI2/KI catalytic system to selectively afford previously unreported 2-(4-acylfuran-2-yl)acetamides in fair to good yields (54-81%) over 19 examples. The process takes place under relatively mild conditions and occurs via a mechanistic pathway involving Csp-H activation by oxidative monoamincarbonylation of the terminal triple bond of the substrates with formation of 2-ynamide intermediates, followed by 5-exo-dig O-cyclization (via intramolecular conjugate addition of the in situ formed enolate to the 2-ynamide moiety) and aromative isomerization.

Synthesis of Benzothiophene-3-carboxylic Esters by Palladium Iodide-Catalyzed Oxidative Cyclization-Deprotection-Alkoxycarbonylation Sequence under Aerobic Conditions

A palladium-catalyzed carbonylative approach to benzothiophene-3-carboxylic esters, starting from simple and readily available building blocks [2-(methylthio)phenylacetylenes, CO, an alcohol, and O₂ (from air)], is reported. The process is catalyzed by the simple PdI₂/KI catalytic system to give the desired products in fair to high yields (57-83%). Interestingly, the reaction also works nicely in the ionic liquid BmimBF₄ as the solvent, with the possibility to recycle the catalytic system several times without appreciable loss of activity.

Remote Construction of N-Heterocycles via 1,4-Palladium Shift-Mediated Double C-H Activation

In the past years, Pd⁰‐catalyzed C(sp³)−H activation provided efficient and step‐economical methods to synthesize carbo‐ and heterocycles via direct C(sp²)−C(sp³) bond formation. We report herein that a 1,4‐Pd shift allows access to N‐heterocycles which are difficult to build via a direct reaction. It is shown that o‐bromo‐N‐methylanilines undergo a 1,4‐Pd shift at the N‐methyl group, followed by intramolecular trapping by C(sp²)−H or C(sp³)−H activation at another nitrogen substituent and remote C−C bond formation to generate biologically relevant isoindolines and β‐lactams. The product selectivity is influenced by the employed ligand, with NHCs favoring the product of remote C−C coupling against products arising from direct C−C coupling and N‐demethylation.

Metal Promoted Cyclocarbonylation Reactions in the Synthesis of Heterocycles

Oxygen and nitrogen heterocycle systems are found in a vast number of natural substrates and biologically active molecules such as antimycotics, antibiotics, antitumors and antioxidants, in addition to pigments and fluorophores [...]

Supported Metal Catalysts for the Synthesis of N-Heterocycles

Nitrogen-containing heterocycles are important scaffolds for a large number of compounds with biological, pharmaceutical, industrial and optoelectronic applications. A wide range of different methodologies for the preparation of N-heterocycles are based on metal-catalyzed cyclization of suitable substrates. Due to the growing interest in Green Chemistry criteria over the past two decades, the use of supported metal catalysts in the preparation of N-heterocycles has become a central topic in Organic Chemistry. Here we will give a critical overview of all the solid supported metal catalysts applied in the synthesis of N-heterocycles, following a systematic approach as a function of the type of support: (i) metal catalysts supported on inorganic matrices; (ii) metal catalysts supported on organic matrices; (iii) metal catalysts supported on hybrid inorganic-organic matrices. In particular, we will try to emphasize the effective heterogeneity and recyclability of the described metal catalysts, specifying which studies were carried out in order to evaluate these aspects.

DMF as CO Surrogate in Carbonylation Reactions: Principles and Application to the Synthesis of Heterocycles

Transition metal-catalyzed carbonylation reactions have emerged as one of the most relevant synthetic approaches for the preparation of carbonyl-containing molecules. The most commonly used protocol for the insertion of a carbonyl moiety is the use of carbon monoxide (CO) but, due to its toxic and explosive nature, this process is not suitable at an industrial scale. More recently, the chemistry of CO surrogates has received large attention as a way to use less expensive and more environmentally friendly methods. Among the various CO surrogates, N,N-dimethylformamide (DMF) has been paid greater attention due to its low cost and easy availability. This mini-review gives appealing insights into the application of DMF as a CO surrogate in metal-catalyzed carbonylations; in particular, in the first part we will give a general state of the art of these reactions for the preparation of carbonyl-containing molecules; then, we will take into account all the various synthetic approaches for the metal-catalyzed carbonylative synthesis of heterocycles using DMF as a CO surrogate. Each protocol has been discussed critically in order to screen the best synthetic method and to offer perspective on trends and future directions in this field.

A general strategy for the synthesis of α-trifluoromethyl- and α-perfluoroalkyl-β-lactams via palladium-catalyzed carbonylation

β-Lactam compounds play a key role in medicinal chemistry, specifically as the most important class of antibiotics. Here, we report a novel one-step approach for the synthesis of α-(trifluoromethyl)-β-lactams and related products from fluorinated olefins, anilines and CO. Utilization of an advanced palladium catalyst system with the Ruphos ligand allows for selective cycloaminocarbonylations to give diverse fluorinated β-lactams in high yields.

Palladium Nanoparticles Supported on Smopex-234® as Valuable Catalysts for the Synthesis of Heterocycles

Supported catalysts are important tools for developing green-economy-based processes. Palladium nanoparticles (NPs) that are immobilized on two fibers developed as metal scavengers (i.e., Smopex®-234 and Smopex®-111, 1% w/w) have been prepared and tested in copper-free cyclocarbonylative Sonogashira reactions. Their catalytic activity has been compared with that of a homogeneous catalyst (i.e., PdCl2(PPh3)2). Pd/Smopex®-234 showed high activity and selectivity in the synthesis of functionalized heterocycles, such as phthalans and isochromans, even when working with a very low amount of palladium (0.2–0.5 mol%). The extension of Pd/Smopex®-234 promoted cyclocarbonylative reactions to propargyl and homopropargyl amides afforded the corresponding isoindoline and dihydrobenzazepine derivatives. A preliminary test on Pd NPs leaching into the solution (1.7 × 10−3 mg) seems to indicate that, at the end of the reaction, almost all of the active metal is present on the fiber surface.

Preparation and Degradation of Rhodium and Iridium Diolefin Catalysts for the Acceptorless and Base-Free Dehydrogenation of Secondary Alcohols

Rhodium and iridium diolefin catalysts for the acceptorless and base-free dehydrogenation of secondary alcohols have been prepared, and their degradation has been investigated, during the study of the reactivity of the dimers [M(μ-Cl)(η⁴-C₈H₁₂)]₂ (M = Rh (1), Ir (2)) and [M(μ-OH)(η⁴-C₈H₁₂)]₂ (M = Rh (3), Ir (4)) with 1,3-bis(6′-methyl-2′-pyridylimino)isoindoline (HBMePHI). Complex 1 reacts with HBMePHI, in dichloromethane, to afford equilibrium mixtures of 1, the mononuclear derivative RhCl(η⁴-C₈H₁₂){κ¹-N_py-(HBMePHI)} (5), and the binuclear species [RhCl(η⁴-C₈H₁₂)]₂{μ-N_py,N_py-(HBMePHI)} (6). Under the same conditions, complex 2 affords the iridium counterparts IrCl(η⁴-C₈H₁₂){κ¹-N_py-(HBMePHI)} (7) and [IrCl(η⁴-C₈H₁₂)]₂{μ-N_py,N_py-(HBMePHI)} (8). In contrast to chloride, one of the hydroxide groups of 3 and 4 promotes the deprotonation of HBMePHI to give [M(η⁴-C₈H₁₂)]₂(μ-OH){μ-N_py,N_iso-(BMePHI)} (M = Rh (9), Ir (10)), which are efficient precatalysts for the acceptorless and base-free dehydrogenation of secondary alcohols. In the presence of KO^tBu, the [BMePHI]⁻ ligand undergoes three different degradations: alcoholysis of an exocyclic isoindoline-N double bond, alcoholysis of a pyridyl-N bond, and opening of the five-membered ring of the isoindoline core.

Synthesis of 2-isoxazolyl-2,3-dihydrobenzofurans via palladium-catalyzed cascade cyclization of alkenyl ethers

An efficient palladium-catalyzed cascade cyclization reaction of alkenyl ethers with alkynyl oxime ethers for the construction of poly-heterocyclic scaffolds has been developed.

Research progress in biological activities of isochroman derivatives

Isochromans are well recognized heterocyclic compounds in drug discovery which produce diverse therapeutically related applications in pharmacological practices. Medicinal chemistry investigators have synthesized drug-like isochroman candidates with multiple medicinal features including central nervous system (CNS), antioxidant, antimicrobial, antihypertensive, antitumor and anti-inflammatory agents. Simultaneously, SAR (Structure-Activity Relationship) analysis has drawn attentions among medicinal chemists, along with a great deal of derivatives have been derived for potential targets. In this article, we thoroughly summarize the biological activities and part of typical SAR for isochroman derivatives reported on existing literatures and patents, wishing to provide an overall retrospect and prospect on the isochroman analogues.

From Alkynes to Heterocycles through Metal-Promoted Silylformylation and Silylcarbocyclization Reactions

Oxygen and nitrogen heterocyclic systems are present in a large number of natural and synthetic compounds. In particular, oxa- and aza-silacyclane, tetrahydrofuran, benzofuran, cycloheptadifuranone, cycloheptadipyrrolone, pyrrolidine, lactone, lactam, phthalan, isochromanone, tetrahydroisoquinolinone, benzoindolizidinone, indoline and indolizidine scaffolds are present in many classes of biologically active molecules. Most of these contain a C=O moiety which can be easily introduced using carbonylative reaction conditions. In this field, intramolecular silylformylation and silylcarbocyclization reactions may afford heterocyclic compounds containing a carbonyl functional group together with a vinylsilane moiety which can be further transformed. Considering these two aspects, in this review a detailed analysis of the literature data regarding the application of silylformylation and silylcarbocyclization reactions to the synthesis of several heterocyclic derivatives is reported.

Synthesis of 3-Alkylideneisoindolin-1-ones via Sonogashira Cyclocarbonylative Reactions of 2-Ethynylbenzamides

Cyclocarbonylative Sonogashira reactions of ortho-ethynylbenzamides have been investigated. The process is carried out under CO pressure, in the presence of a very small amount of PdCl₂(PPh₃)₂ (0.4 mol %) as a catalytic precursor and without the need for a Cu salt as the co-catalyst. 2-Ethynylbenzamide reacted successfully with iodoarenes bearing electron-withdrawing and electron-donating groups, giving rise to different classes of compounds depending on the solvent used. On the contrary, N-(4-chlorophenyl)-2-ethynylbenzamide afforded exclusively polyfunctionalized isoindolinones with high stereoselectivity toward (E) isomers.

Palladium-catalyzed denitrative Sonogashira-type cross-coupling of nitrobenzenes with terminal alkynes

Described herein is a palladium-catalyzed cross-coupling reaction between nitroarenes and terminal alkynes, offering a facile method for C(sp²)–C(sp) bond formation.

Catalyst-free cyclization of anthranils and cyclic amines: one-step synthesis of rutaecarpine

An efficient synthesis of a variety of quinazolinone derivatives via a direct cyclization reaction between commercially available anthranils and cyclic amines is described. The developed transformation proceeds with the merits of high step- and atom-efficiency, a broad substrate scope, and good to excellent yields, without additional catalysts, and offers a practical way for the preparation of rutaecarpine and its derivatives with structural diversity.

Copper Catalyzed One-Pot Three-Component Imination-Alkynylation-aza-Michael Sequence: Enantio- and Diastereoselective Syntheses of 1,3-Disubstituted Isoindolines and Tetrahydroisoquinolines

An enantio- and diastereoselective syntheses of 1, 3-disubstituted isoindolines and tetrahydroisoquinolines via Cu^I-Pybox-diPh catalyzed one-pot imination-alkynylation-aza-Michael sequence has been reported. The three-component reaction produces one C-C and two C-N bonds sequentially with high yield (up to 92%), enantioselectivity (up to 99%), and diastereoselectivity (up to 9:1) in a single operation. Furthermore, the synthetic utility of the product has been demonstrated by LiAlH₄ reduction of ester and hydrogenation of alkyne functionality without losing the stereoselectivity.

Enantioselective conjugate addition of an α,α-dithioacetonitrile with nitroalkenes using chiral bis(imidazoline)–Pd complexes

The first highly enantioselective reaction of α,α-dithioacetonitriles with nitroolefins as electron deficient olefins using chiral Phebim–Pd catalysts was developed.

Diastereoselective synthesis ofcis-1,3-disubstituted isoindolinesviaa highly site-selective tandem cyclization reaction

A highly site-selective tandem reaction involving regioselective ring opening of aziridines and Michael addition of electron-deficient alkenes has been described.