N-Heterocyclic Carbene Deposition on a Copper Powder Surface Using Mechanochemistry

Metal powders are crucial precursors for manufacturing surfaces through thermal spraying, cold spraying, and 3D printing methods. However, surface oxidation of these precursors poses a challenge to the coherence of the metallic materials during manufacturing processes. Herein, we introduce a method for surface modification of copper powder with N-heterocyclic carbenes (NHCs) using mechanochemistry to mitigate surface oxidation. A resonant acoustic mixer was used to deposit five different carbenes on copper powders using benzimidazolium hydrogen carbonate precursors and a trace amount of solvent. Significant oxide reduction was observed by X-ray photoelectron spectroscopy (XPS), and the immobilization of NHCs on the powder was confirmed by mass spectrometry and XPS. The consistent morphology of the modified copper powder minimizes any potential impact on subsequent manufacturing processes. Moreover, a life cycle assessment indicates the potential environmental hotspots, leading to recommendations to develop lower-footprint processes. Overall, the mechanochemical method to produce NHC-modified metal powders with a higher metallic content provides great prospects for powder precursors to produce coatings from thermal spray, cold spray, and additive manufacturing processes.

Condensation of carboxylic acids with amines using the Boc2O/DMAP system under solvent-free conditions

The present study describes the use of the di-tert-butyl dicarbonate (Boc2O)/4-(N,N-dimethylamino)pyridine (DMAP) system for the amidation of carboxylic acids under neat conditions without heating. A set of carboxylic acids was explored, such as non-steroidal anti-inflammatory drugs (NSAIDs), fatty acids and protected prolines in the presence of aromatic, benzylic and aliphatic amines as nucleophilic partners. The scope of this easy approach was extended to the preparation of thirty-two diverse carboxylic amides, which were recovered with isolated yields varying from moderate to excellent. To increase the value of this protocol, a scalable chemoselective amidation of oleic acid with ethanolamine was successfully established. The corresponding fatty carboxylic amide, N-oleoylethanolamide (OEA), was recovered with 73% yield. This study highlights the potency of the use of mixed anhydrides formed in situ and the pursuit of the reaction profile reveals sequential steps rather than a one-pot process.

Mechanochemistry Drives Alkene Difunctionalization via Radical Ligand Transfer and Electron Catalysis

A general and modular protocol is reported for olefin difunctionalization through mechanochemistry, facilitated by cooperative radical ligand transfer (RLT) and electron catalysis. Utilizing mechanochemical force and catalytic amounts of 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO), ferric nitrate can leverage nitryl radicals, transfer nitrooxy-functional group via RLT, and mediate an electron catalysis cycle under room temperature. A diverse range of activated and unactivated alkenes exhibited chemo- and regioselective 1,2-nitronitrooxylation under solvent-free or solvent-less conditions, showcasing excellent functional group tolerance. Mechanistic studies indicated a significant impact of mechanochemistry and highlighted the radical nature of this nitrative difunctionalization process.

A Comprehensive Review on Deep Eutectic Solvents and Its Use to Extract Bioactive Compounds of Pharmaceutical Interest

The extraction of bioactive compounds of pharmaceutical interest from natural sources has been significantly explored in recent decades. However, the extraction techniques used were not very efficient in terms of time and energy consumption; additionally, the solvents used for the extraction were harmful for the environment. To improve the environmental impact of the extractions and at the same time increase the extraction yields, several new extraction techniques were developed. Among the most used ones are ultrasound-assisted extraction and microwave-assisted extraction. These extraction techniques increased the yield and selectivity of the extraction in a smaller amount of time with a decrease in energy consumption. Nevertheless, a high volume of organic solvents was still used for the extraction, causing a subsequent environmental problem. Neoteric solvents appeared as green alternatives to organic solvents. Among the neoteric solvents, deep eutectic solvents were evidenced to be one of the best alternatives to organic solvents due to their intrinsic characteristics. These solvents are considered green solvents because they are made up of natural compounds such as sugars, amino acids, and carboxylic acids having low toxicity and high degradability. In addition, they are simple to prepare, with an atomic economy of 100%, with attractive physicochemical properties. Furthermore, the huge number of compounds that can be used to synthesize these solvents make them very useful in the extraction of bioactive compounds since they can be tailored to be selective towards a specific component or class of components. The main aim of this paper is to give a comprehensive review which describes the main properties, characteristics, and production methods of deep eutectic solvents as well as its application to extract from natural sources bioactive compounds with pharmaceutical interest. Additionally, an overview of the more recent and sustainable extraction techniques is also given.

Non-noble metal-catalyzed cross-dehydrogenation coupling (CDC) involving ether α-C(sp3)-H to construct C-C bonds

Ether derivatives are widespread as essential building blocks in various drugs, natural products, agrochemicals, and materials. Modern economy requires developing green strategies with improved efficiency and reduction of waste. Due to its atom and step-economy, the cross-dehydrogenative coupling (CDC) reaction has become a major strategy for ether functionalization. This review covers C-H/C-H cross-coupling reactions of ether derivatives with various C-H bond substrates via non-noble metal catalysts (Fe, Cu, Co, Mn, Ni, Zn, Y, Sc, In, Ag). We discuss advances achieved in these CDC reactions and hope to attract interest in developing novel methodologies in this field of organic chemistry.

Solvent-free mechanochemical grinding facilitates clean synthesis of N-substituted amines

Herein, we have optimized a highly efficient and neat mechanochemical grinding procedure for the facile synthesis of N-substituted amines using easily available substituted halides and amines. The developed protocol is applicable for gram scale synthesis as well. Advantageous features of this strategy include mild and neat reaction conditions, a short reaction time at room temperature and isolation of products without column chromatography in excellent yields.

Solvent-Mediated Polymorphic Transformations in Molten Polymers: The Account of Acetaminophen

Solvent-mediated polymorphic transformations (SMPTs) employing nonconventional solvents (polymer melts) is an underexplored research topic that limits the application of polymer-based formulation processes. Acetaminophen (ACM), a widely studied active pharmaceutical ingredient (API), is known to present SMPTs spontaneously (<30 s) in conventional solvents such as ethanol. In situ Raman spectroscopy was employed to monitor the induction time for the SMPT of ACM II to I in polyethylene glycol (PEG) melts of different molecular weights (Mw, 4000, 10 000, 20 000, 35 000 g/mol). The results presented here demonstrate that the induction time for the SMPT of ACM II to I in PEG melts is driven by its diffusivity through the polymer melts. Compared to conventional solvents (i.e., ethanol) the mass transfer (diffusion coefficient, D) in melts is significantly hindered (Dethanol = 4.84 × 10-9 m2/s > DPEGs = 5.32 × 10-11-8.36 × 10-14 m2/s). Ultimately, the study proves that the induction time for the SMPT can be tuned by understanding the dispersant's physicochemical properties (i.e., η) and, thus, the D of the solute in the dispersant. This allows one to kinetically access and stabilize metastable forms or delay their transformations under given process conditions.

C–N coupling reactions with arenes through C–H activation: the state-of-the-art versus the principles of green chemistry

Herein, we discuss the state-of-the-art in arene C–N coupling through C–H activation and to what extent it complies with the principles of green chemistry, with a focus on heterogeneously catalysed systems.

Efficacy of Selenourea Organocatalysts in Asymmetric Michael Reactions under Standard and Solvent-Free Conditions

By varying the steric and electronic surroundings of the hydrogen-bonding motif, the novel chiral Cinchona-alkaloid based selenoureas were developed. Acting as bifunctional catalysts, they were applied in the Michael reactions of dithiomalonate and nitrostyrene providing chiral adducts with up to 96% ee. The asymmetric Michael–-hemiacetalization reaction of benzylidene pyruvate and dimedone, performed with the assistance of 5 mol% of selenoureas, furnished the product with up to 93% ee and excellent yields. The effectiveness of the new hydrogen-bond donors was also proved in solvent-free reactions under ball mill conditions, supporting the sustainability of the devised catalytic protocol.

Solvent-Free Visible Light Photocatalytic Oxidation Processes Mediated by Transparent Films of an Imine-Based Organic Polymer

Reaction between concentrated solutions of phenotiazine containing trialdehyde building block 4,4′,4″-(10-phenothiazine-3,7,10-triyl)tribenzaldehyde and (1R,2R)-cyclohexane-1,2-diamine results in the formation of a yellow transparent film. Exhaustive characterization of this material indicates that it is the result of the assembly of a linear polymer resulting from the linking of imine-based macrocycles. Phenotiazine units confer to this plastic the optical properties characteristic of photocatalytic materials. The transparency of the obtained material enabled the performance of solvent-free photocatalytic processes. This concept is illustrated by the oxidation of liquid organic sulfides, which can be performed in a recyclable manner. According to selective quenching experiments, such processes are the result of the energy transfer to oxygen molecule, generating singlet oxygen that is able to activate the sulfide molecules directly.

Deep Eutectic Solvents (DESs) as Green Extraction Media of Beneficial Bioactive Phytochemicals

Deep eutectic solvents (DES) are a mixture of two or more components and are classified as ionic solvents with special properties such as low volatility, high solubility, low melting points, low-cost materials and are less toxic to humans. Using DES has been suggested as an eco-friendly, green method for extraction of bioactive compounds from medicinal plants and are a safe alternative for nutritional, pharmaceutical and various sector applications. Conventional solvent extraction methods present drawbacks such as long extraction period, safety issues, harmful to the environment, costly and large volume of solvents required. The extraction method with DES leads to higher extraction yield and better bioactivity results as compared to the conventional solvents. This review provides a summary of research progress regarding the advantages of using DES to extract bioactive compounds such as phenolic acid, flavonoids, isoflavones, catechins, polysaccharides, curcuminoids, proanthocyanidin, phycocyanin, gingerols, ginsenosides, anthocyanin, xanthone, volatile monoterpenes, tannins, lignin, pectin, rutin, tert-butyl hydroquinone, chlorogenic acids, resveratrol and others, as opposed to using conventional solvents. The bioactivity of the extracts is determined using antioxidant, antibacterial and antitumor activities. Hence, DESs are considered potential green media with selective and efficient properties for extracting bioactive ingredients from medicinal plants.

Unconventional approaches for the introduction of sulfur-based functional groups

Organosulfur compounds have a pivotal role in the functionalities of many natural products, pharmaceuticals and organic materials. For these reasons, the search for new methodologies for the formation of carbon-sulfur bonds has been the object of intensive work for organic chemists. However, the proposed strategies suffer from various drawbacks, such as volatility, toxicity, and instability of the sulfur sources or the use of VOC solvents. In this review, we summarise the recent protocols which have the goal of obtaining sulfones, thioethers, thiazines, thiazepines and sulfonamides in an unconventional and/or sustainable way. The use of starting materials less invasive and toxic with respect to the traditional reagents, alternative solvents such as water, ionic liquids or deep eutectic solvents, the exploitation of ultrasound and electrochemistry, increasing the efficiency of the process, are reported. Moreover, representative reaction mechanisms are also discussed.

Deep Eutectic Solvents and Multicomponent Reactions: Two Convergent Items to Green Chemistry Strategies

One of the highlights of green chemistry is the development of techniques and procedures with low environmental impact. In the last years, deep eutectic solvents (DES) have become an important alternative to conventional organic solvents. For a period ionic liquids have provoked remarkable interest, but they have been displaced by DES because they show easier preparation methods, lower prices, many of them are biodegradable and compatible with biological systems. In addition, they show adjustable physicochemical properties, high thermal stability, low volatility and are compatible with water. In this paper is reviewed the state of the art of the use of DES paying special attention to the role of reaction media in organic synthesis.

Reactivity of substrates with multiple competitive reactive sites toward NBS under neat reaction conditions promoted by visible light

Regioselectivity of visible-light-induced transformations of a range of (hetero)aryl alkyl-substituted ketones bearing several competitive reactive sites (α-carbonyl, benzyl and aromatic ring) with N-bromosuccinimide (NBS) was studied under solvent-free reaction conditions (SFRC) and in the absence of inert-gas atmosphere, radical initiators and catalysts. An 8-W energy-saving household lamp was used for irradiation. Heterogeneous reaction conditions were dealt with throughout the study. All substrates were mono- or dibrominated at the α-carbonyl position, and additionally, some benzylic or aromatic bromination was observed in substrates with benzylic carbon atoms or electron-donating methoxy groups, respectively. Surprisingly, ipso-substitution of the acyl group with a bromine atom took place with (4-methoxynaphthyl) alkyl ketones. While the addition of the radical scavenger TEMPO (2,2,6,6-tetramethylpiperidin-1-yloxy) decreased the extent of α- and ring bromination, it completely suppressed the benzylic bromination and α,α-dibromination with NBS under SFRC.

Solvent-free Reactions for the Synthesis of Indolenine-based Squaraines and Croconaines: Comparison of Thermal Heating, Mechanochemical Milling, and IR Irradiation

Squaraines and croconaines are organic dyes characterized by intense absorption in the visible or near-infrared spectral regions with applications ranging from biology to material sciences. They are commonly synthesized by condensation reactions of oxocarbonic acids (squaric or croconic acid, respectively) with electron-rich aromatic compounds in high-boiling organic solvents. Here, a simple, cost-effective, and environmentally benign process was developed for the synthesis of indolenine-based squaraines and croconaines under solvent-free conditions. Protocols based on conventional thermal heating, mechanochemical milling, and IR-light activation were compared.

Mechanochemical Aza-Vinylogous Povarov Reactions for the Synthesis of Highly Functionalized 1,2,3,4-Tetrahydroquinolines and 1,2,3,4-Tetrahydro-1,5-Naphthyridines

The aza-vinylogous Povarov reaction between aromatic amines, α-ketoaldehydes or α-formylesters and α,β-unsaturated dimethylhydrazones was carried out in a sequential three-component fashion under mechanochemical conditions. Following extensive optimization work, the reaction was performed on a vibratory ball mill operating at 20 Hz and using zirconium oxide balls and milling jar, and afforded 1,2,3,4-tetrahydroquinolines and 1,2,3,4-tetrahydro- 1,5-naphthyridines functionalized at C-2, C-4 and also at C-6, in the latter case. This protocol generally afforded the target compounds in good to excellent yields and diastereoselectivities. A comparison of representative examples with the results obtained under conventional conditions revealed that the mechanochemical protocol affords faster Povarov reactions in comparable yields using a solvent-less environment.

1,3-Dipolar Cycloaddition Reactions of Nitrile Oxides under "Non-Conventional" Conditions: Green Solvents, Irradiation, and Continuous Flow

The 1,3-dipolar cycloaddition reactions (DCs) of nitrile oxides (NOs) to alkenes and alkynes are useful methods for the synthesis of 2-isoxazolines and isoxazoles respectively, which are important classes of heterocyclic compounds in organic and medicinal chemistry. Most of these reactions are carried out in organic solvents and under thermal activation. Nevertheless the use of supercritical carbon dioxide (scCO₂ ) and ionic liquids (Ils) as alternative solvents and the application of microwave (MW) and ultrasound (US) as alternative activation procedures have evident advantages from the "Green Chemistry" point of view. The critical discussion on the applications of these "unconventional" activation methods and reaction conditions in the 1,3-DCs of NOs is the objective of the present Review.

Visible light-induced transformation of aldehydes to esters, carboxylic anhydrides and amides

A transition metal- and organophotocatalyst free synthesis of esters, carboxylic anhydrides and amides from aldehydes induced by visible-light has been reported.

Systematic evaluation of hydrophobic deep-melting eutectics as alternative solvents for the extraction of organic solutes from aqueous solution

The partitioning of a number of organic compounds, including a series of n-alkanols and various simple, substituted benzene derivatives, between several hydrophobic (i.e., water-immiscible) deep eutectic solvents (HDESs) and water has been examined. The extent of extraction is shown to vary with the charge state of the molecule and the composition of the eutectic. In addition, the HDES–water distribution of a given solute is found to be directly proportional to (but typically less than) its partitioning in the octanol–water system, consistent with a significant role for solute hydrophobicity in the observed extraction behavior. Comparison of solute extraction into an HDES to that observed for other “unconventional” solvents (e.g., room-temperature ionic liquids and a soybean-derived oil) shows that hydrophobic deep eutectic solvents provide comparable or superior extraction efficiency.

Organic solute partitioning between a hydrophobic deep eutectic solvent and water is directly related to the corresponding P_ow values.

A solvent-free mechanochemical synthesis of polyaromatic hydrocarbon derivatives

Polyaromatic hydrocarbons are central molecules in the future of nanotechnology. However, the synthesis of these molecules is limited by their lack of solubility in solvents, especially green solvents, their ease of oxidation in solution and use of harmful reagents. Solvent-free mechanochemistry has been shown to have excellent potential for these types of molecules and should provide a much more environmentally benign approach for the synthesis of this very important class of molecules. This report details the use of mechanochemistry on an iterative strategy for the synthesis of polyaromatic hydrocarbon derivatives.

A solvent-free use of mechanochemistry on an iterative strategy for the synthesis of polyaromatic hydrocarbon derivatives.

On the cost of academic methodologies

Synthetic methodologies can be easily compared using the Cost of Academic Methodologies (CAM) parameter, which estimates the cost of making a mole of a product.