Transition Metal-Catalyzed Reductive Functionalization of CO2

Aerobic Oxidative Synthesis of Formamides from Amines and Bioderived Formyl Surrogates

Herein we present a new strategy for the oxidative synthesis of formamides from various types of amines and bioderived formyl sources (DHA, GLA and GLCA) and molecular oxygen (O2) as oxidant on g-C3N4 supported Cu catalysts. Combined characterization data from EPR, XAFS, XRD and XPS revealed the formation of single CuN4 sites on supported Cuphen/C3N4 catalysts. EPR spin trapping experiments disclosed ⋅OOH radicals as reactive oxygen species and ⋅NR1R2 radicals being responsible for the initial C-C bond cleavage. Control experiments and DFT calculations showed that the successive C-C bond cleavage in DHA proceeds via a reaction mechanism co-mediated by ⋅NR1R2 and ⋅OOH radicals based on the well-equilibrated CuII and CuI cycle. Our catalyst has much higher activity (TOF) than those based on noble metals.

Skeletal Formation of Carbocycles with CO2: Selective Synthesis of Indolo[3,2-b]carbazoles or Cyclophanes from Indoles, CO2, and Phenylsilane

The catalytic reactions of indoles with CO2 and phenylsilane afforded indolo[3,2-b]carbazoles, where the fused benzene ring was constructed by forming two C-H bonds and four C-C bonds with two CO2 molecules via deoxygenative conversions. Nine-membered cyclophanes made up of three indoles and three CO2 molecules were also obtained, where the cyclophane framework was constructed by forming six C-H bonds and six C-C bonds. These multicomponent cascade reactions giving completely different carbocycles were switched simply by choosing the solvent, acetonitrile or ethyl acetate.

Mechanism of CO2 Reduction to Methanol with H2 on an Iron(II)-scorpionate Catalyst

CO2 utilization is an important process in the chemical industry with great environmental power. In this work we show how CO2 and H2 can be reacted to form methanol on an iron(II) center and highlight the bottlenecks for the reaction and what structural features of the catalyst are essential for efficient turnover. The calculations predict the reactions to proceed through three successive reaction cycles that start with heterolytic cleavage of H2 followed by sequential hydride and proton transfer processes. The H2 splitting process is an endergonic process and hence high pressures will be needed to overcome this step and trigger the hydrogenation reaction. Moreover, H2 cleavage into a hydride and proton requires a metal to bind hydride and a nearby source to bind the proton, such as an amide or pyrazolyl group, which the scorpionate ligand used here facilitates. As such the computations highlight the non-innocence of the ligand scaffold through proton shuttle from H2 to substrate as an important step in the reaction mechanism.

Cu-catalyzed carboxylation of organoboronic acid pinacol esters with CO2

Chemical fixation of CO2 has received much attention. In particular, catalytic C-C bond formation with CO2 giving carboxylic acids is of great significance. Among the CO2 fixation methods, multiple carboxylation is one of the challenging subjects. Here we investigated the Cu-catalyzed carboxylation of a variety of boronic acid pinacol esters (C(sp2)-, C(sp3)-, and C(sp)-B compounds) with CO2, which efficiently provided the corresponding products, including aryl, alkenyl, alkyl, and alkynyl carboxylic acids. This carboxylation was also applicable to multiple CO2 fixation giving di- and tri-carboxylic acids under robust reaction conditions (totally 29 examples).

Regioselective hydroesterification of alkenes and alkenylphenols utilizing CO2 and hydrosilane

As an important and attractive C1 building block, the diversified exploitation of CO₂ in chemical transformations possesses significant research and application value. Herein, an effective palladium-catalyzed intermolecular hydroesterification of a wide range of alkenes with CO₂ and PMHS is described, successfully generating diverse esters with up to 98% yield and up to 100% linear-selectivity. In addition, the palladium-catalyzed intramolecular hydroesterification of alkenylphenols with CO₂ and PMHS is also developed to construct a variety of 3-substituted-benzofuran-2(3H)-ones with up to 89% yield under mild conditions. In both systems, CO₂ functions as an ideal CO source with the assistance of PMHS, thus smoothly participating in a series of alkoxycarbonylation processes.

Metal-Ligand Cooperativity in MnI -Catalysed N-Formylation of Secondary Amides and Lactams Using CO2 at Room Temperature

A Mn^I catalyst featuring redox-active tridentate phenalenyl (PLY) ligand has been used for catalytic N-formylation of secondary amides and lactams under 1 atm CO₂ as a C₁ source at room temperature for the first time. The protocol is applicable to a wide range of secondary amides including heterocycles, bio-active cinnamide derivatives and the diversification of therapeutic molecules. In-depth mechanistic investigations based on experimental outcomes and DFT calculations suggested an unconventional metal-ligand cooperation, where a ligand-centred radical plays a crucial role in initiating the reaction process.

PNP-type ligands enabled copper-catalyzed N-formylation of amines with CO2 in the presence of silanes

The sustainable catalytic transformation of carbon dioxide into valuable fine chemicals with high efficiency is a global challenge as although CO₂ is an abundant, nontoxic, and sustainable carbon feedstock it is also the most important factor behind the Greenhouse Effect. We describe herein a PNP-type ligand-enabled copper-catalyzed N-formylation of amines utilizing CO₂ as the building block in the presence of hydrosilane as the reductant. Our current protocol featured newly synthesized PNP-type ligands with broad substrate scope under mild reaction conditions.

Catalytic reduction of carbon dioxide by a zinc hydride compound, [Tptm]ZnH, and conversion to the methanol level

The zinc hydride compound, [Tptm]ZnH, may achieve the reduction of CO₂ by (RO)₃SiH (R = Me, Et) to the methanol oxidation level, (MeO)_xSi(OR)_4-x, via the formate species, HCO₂Si(OR)₃. However, because insertion of CO₂ into the Zn-H bond is more facile than insertion of HCO₂Si(OR)₃, conversion of HCO₂Si(OR)₃ to the methanol level only occurs to a significant extent in the absence of CO₂.

Oxovanadium(V)-Catalyzed Synthesis of Ureas from Disilylamines and Carbon Dioxide under Ambient Pressure

Here, a commercially available easy-to-handle oxovanadium(V) compound is demonstrated to serve as an efficient catalyst for the synthesis of ureas from disilylamines and carbon dioxide under ambient pressure. The catalytic activation of carbon dioxide proceeds without any additives, demonstrating a broad substrate scope and easy scalability to validate this catalytic activation of carbon dioxide. This catalytic system can be applied to the synthesis of unsymmetric ureas and chiral urea with retention of chirality.

A tandem reduction of primary amines, carbonyl compounds, CO2, and boranes catalyzed by in situ formed frustrated Lewis pairs

A catalytic system combining 2-aminothiazole and borane efficiently catalyzes a four-component tandem reductive coupling of primary amines, carbonyl compounds, boranes, and CO2 (1 atm) and a broad range of functionalized tertiary N-methylamines are synthesized.

Borane-Trimethylamine Complex as a Reducing Agent for Selective Methylation and Formylation of Amines with CO2

We report herein that a borane-trimethylamine complex worked as an efficient reducing agent for the selective methylation and formylation of amines with 1 atm CO₂ under metal-free conditions. 6-Amino-2-picoline serves as a highly efficient catalyst for the methylation of various secondary amines, whereas in its absence, the formylation of primary and secondary amines was achieved in high yield with high chemoselectivity. Mechanistic studies suggest that the 6-amino-2-picoline-borane catalytic system operates like an intramolecular frustrated Lewis pair to activate CO₂.

C-Methylenation of anilines and indoles with CO2 and hydrosilane using a pentanuclear zinc complex catalyst

The one-step C-methylenation of anilines and indoles with CO2 and phenylsilane was catalyzed by a pentanuclear ZnII complex to give diarylmethanes via geminal C-H and C-C bond formation. It is proposed that the zinc-hydride complex generated in situ is a catalytically active species and that bis(silyl)acetal is a key intermediate. When aniline was used as a substrate, both the C-methylenation and N-methylation proceeded.

Oxovanadium(v)-catalyzed amination of carbon dioxide under ambient pressure for the synthesis of ureas

Carbon dioxide is regarded as a reliable C1 building block in organic synthesis because of the nontoxic, abundant, and economical characteristics of carbon dioxide. In this manuscript, a commercially available oxovanadium(v) compound was demonstrated to serve as an efficient catalyst for the catalytic amination of carbon dioxide under ambient pressure in the synthesis of ureas. The catalytic transformation of chiral amines into the corresponding chiral ureas without loss of chirality was also performed. Furthermore, a gram-scale catalytic urea synthesis under ambient pressure was successfully achieved to validate the scalability of this catalytic activation of carbon dioxide.

Catalytic activation of carbon dioxide as a C1 building block under ambient pressure was performed by using a commercially available oxovanadium(v) catalyst for the synthesis of ureas.

Recent advances in liquid hydrosilane-mediated catalytic N-formylation of amines with CO2

Carbon dioxide is an ideal raw material for the synthesis of complex organic compounds because of its rich, non-toxic, and good physical properties. It is of great significance to transform CO₂ into valuable fine chemicals and develop a green sustainable cycle of carbon surplus. Based on hydrosilane as a reducing agent, this work summarizes the recent applications of reductive amidation of CO₂ using different catalysts such as organocatalysts, ionic liquids (ILs), salts, transition metal complexes, and solvents. The main factors affecting the reductive amidation of CO₂ and the possible reaction mechanism are discussed. Moreover, the future orientation and catalytic systems of the formylation of amines with CO₂ and hydrosilane are prospected.

This review depicts different types of catalyst systems developed for upgrading of amines and carbon dioxide into N-formylated products in the presence of hydrosilane, with attention on reaction mechanism and process optimization.

Direct N-formylation of nitroarenes with CO2

Herein we describe a straightforward N-formylation of nitroarenes with CO₂ to access N-aryl formamides exclusively in the presence of iron and hydrosilane as additives. This protocol showcases a good tolerance of a wide range of nitroarenes and nitroheteroarenes.

Synthesis of benzimidazolones via CO2 fixation and N-phenyl formamides using formic acid in presence of zinc embedded polymer complex

A merrifield supported heterogeneous zinc catalyst [Zn(Meri-Ald-Py)] was synthesized and applied for benzimidazolone synthesis through the fixation of carbon dioxide (CO₂) and for different N-formylated products synthesis under mild reaction conditions.

Diverse Catalytic Systems and Mechanistic Pathways for Hydrosilylative Reduction of CO2

Catalytic hydrosilylation of carbon dioxide has emerged as a promising approach for carbon dioxide utilization. It allows the reductive transformation of carbon dioxide into value-added products at the levels of formate, formaldehyde, methanol, and methane. Tremendous progress has been made in the area of carbon dioxide hydrosilylation since the first reports in 1981. This focus review describes recent advances in the design and catalytic performance of leading catalyst systems, including transition-metal, main-group, and transition-metal/main-group and main-group/main-group tandem catalysts. Emphasis is placed on discussions of key mechanistic features of these systems and efforts towards the development of more selective, efficient, and sustainable carbon dioxide hydrosilylation processes.

Computational exploration of substrate and ligand effects in nickel-catalyzed C–Si bond carboxylation with CO2

The ring strain of substrates and steric hindrance of NHC ligands are the key factors affecting the reactivity of CO₂ insertion into sila-nickelacycles.