Control of selectivity and electroactivity on underoxidized polypyrrole film electrodes

Salicylic acid determination in cow urine and drugs using a bienzymatic sensor

An enzymatic biosensor was developed for salicylic acid (salicylate ion) determined using a Clark type gas diffusion electrode and two enzymes (tyrosinase and salicylate hydroxylase) entrapped in a cellulose triacetate membrane. After optimization, the method was applied to the determination of salicylic acid in cow urine. Relatively good recoveries were achieved, between about 83% and 109%, using the calibration curve, and acceptable precision (R.S.D. about 8%). The method is now being tested for the determination of salicylic acid contained in commercially available drug specialities or galenic products. So far agreement with nominal values has been found to be between 75% and 110% with a R.S.D. of less than 8%.

Electropolymerization of pyrrole and immobilization of glucose oxidase in a flow system: influence of the operating conditions on analytical performance

The in situ potentiostatic electropolymerization of pyrrole (Py) on a Pt electrode in a thin-layer amperometric cell and the entrapment of the enzyme glucose oxidase (GOx) for the determination of glucose are reported. Polypyrrole (PPy) is directly formed by continuous passage of a buffered solution of the monomer (0.4 M) and enzyme (250 U mL-1) at pH 7 at a flow rate of 0.05-0.1 mL min-1 under a constant applied potential of +0.85 V vs Ag/AgCl decreases. The electrosynthesis of PPy by injection of 500 microL of a Py + GOx solution in a carrier electrolyte consisting of 0.05 M phosphate buffer and 0.1 M KCl at pH 7.0 was also assayed. The influence of the electropolymerization conditions on the analytical response of the sensor to glucose was investigated. The analytical performance of the PPy/GOx sensor was also studied in terms of durability and storage life, as well as selectivity against electroactive species such as ascorbic acid and uric acid as a function of the thickness of the polymer film formed.