Construction of a Highly Selective and Sensitive La(III) Sensor Based onN-(2-Pyridyl)-N′-(4-methoxyphenyl)-thiourea for Nano Level Monitoring of La(III) Ions

Developments in the Field of Conducting and Non-conducting Polymer Based Potentiometric Membrane Sensors for Ions Over the Past Decade

Many research studies have been conducted on the use of conjugated polymers in the construction of chemical sensors including potentiometric, conductometric and amperometric sensors or biosensors over the last decade. The induction of conductivity on conjugated polymers by treating them with suitable oxidizing agents won Heeger, MacDiarmid and Shirakawa the 2000 Nobel Prize in Chemistry. Common conjugated polymers are poly(acetylene)s, poly(pyrrole)s, poly(thiophene)s, poly(terthiophene)s, poly(aniline)s, poly(fluorine)s, poly(3-alkylthiophene)s, polytetrathiafulvalenes, polynapthalenes, poly(p-phenylene sulfide), poly(p-phenylenevinylene)s, poly(3,4-ethylenedioxythiophene), polyparaphenylene, polyazulene, polyparaphenylene sulfide, polycarbazole and polydiaminonaphthalene. More than 60 sensors for inorganic cations and anions with different characteristics based on conducting polymers have been reported. There have also been reports on the application of non-conducting polymers (nCPs), i.e. PVC, in the construction of potentiometric membrane sensors for determination of more than 60 inorganic cations and anions. However, the leakage of ionophores from the membranes based on these polymers leads to relatively lower life times. In this article, we try to give an overview of Solid-Contact ISE (SCISE), Single-Piece ISE (SPISE), Conducting Polymer (CP)-Based, and also non-conducting polymer PVC-based ISEs for various ions which their difference is in the way of the polymer used with selective membrane. In SCISEs and SPISEs, the plasticized PVC containing the ionophore and ionic additives govern the selectivity behavior of the electrode and the conducting polymer is responsible of ion-to-electron transducer. However, in CPISEs, the conducting polymer layer is doped with a suitable ionophore which enhances the ion selectivity of the CP while its redox response has to be suppressed.

Lanthanide Recognition: an Asymetric Erbium Microsensor Based on a Hydrazone Derivative

N'-(2-hydroxy-1,2-diphenylethylidene)benzohydrazide (HDB) was found tohave a very selective and sensitive behavior towards erbium(III) ions, in comparison tothirteen lanthanide ions, inner transition and representative metal ions and was hence usedas a neutral ion carrier in construction of an Er(III) microelectrode. Theoretical calculationsand conductance studies of HDB to erbium and some other metal ions were carried out andconfirmed selectivity toward Er(III) ions.The best performance was obtained with a membrane contain 3% potassium tetrakis(p-chlorophenyl)borate (KTpClPB) as an anionic additive, 72% dibutyl phthalate (DBP) assolvent mediator, 5% HDB, and 20% poly(vinyl chloride) (PVC). The proposed Er(III)microelectrode exhibits a near Nernstian response of 17.5±0.5 mV per decade of erbiumactivity, and a very wide linear range 1.0×10-3-3.0×10-10 M. It can work well in the pHrange of 3.0-9.0. The lower detection limit (LDL) of the microelectrode was calculated tobe 2.0×10-10 M.